trusted seller
Send Email

Theory Of Machine Lab Equipments

It is imperative for educational institutions and research departments to opt for the up-to-the-minute and finest quality Lab Equipments for safe conduction of the experiments. The offered equipments, not only fulfill the aforesaid requirement, but help people with easy understanding of machinery concepts by going beyond their textbooks. These equipments allow not only researchers, but beginners in interacting directly with the data gathered during the carrying out of experiment. Apart from this, the vended gamut ensures the determination of several new parameters.
Product Image (MTK- 1020PN)

PIN ON DISC WEAR APPARATUS

Price: 100 INR/Piece

Conforms to ASTM standards. Measurement of wear, friction, co-efficient of friction & temperature Performs test under sliding wear conditions. Real time data acquisition of wear, friction, co-efficient of friction & temperature etc. Product Specification Material: Stainless Steel Frequency: 50 Hz Country of Origin: Made in India

Send Inquiry
Request To Call Back
Product Image (MTK-101341)

SLIP & CREEP MEASUREMENT APPARATUS

Price: 100 INR/Piece

We are engaged in offering a wide array of Slip and Creep Measurement Apparatus for measure co-efficient of friction between pulley material and different belt materials. To measure belt slip speed and observe the limited value of load constant speed when the slip just starts. The motor speed is varied by Thyristor Control D.C. Drive. A double channel digital speed indicator indicates driving and driven pulley speeds. With the help of Stroboscope (not in the scope of supply) it is possible to demonstrate the slip of belt on driving and driven pulley. Used in major experimental applications, this range is inclusive of very salient features. Scope of Experimentation: To measure co-efficient of friction between pulley material and different belt materials To measure power transmitted with varied belt tension To measure percentage slip at fixed belt tension by varying load on the Brake drum and plot the graph of v/s percentage slip i.e. Slip Characteristics Finding a Creep Zone from graph To measure belt slip speed and observe the limiting value of load at constant speed when the slip just starts To study creep of belt Utilities Required: Electricity: 0.5 kW, 220 V, Single Phase Stroboscope Technical Details: Motor Variable speed DC Motor 1HP, 1500 RPM Pulleys Driving and driven pulleys of equal diameters (flat pulleys) Loading Arrangement Brake drum along with spring balance and rope arrangement is provided to load the system Belts Flat belts of fixed length of following belt material like Fabric Belt, Canvas Belt, Leather Belt Belt tightening arrangement Bearing block is sliding and dead weight can be applied to set the initial tension in belt Speed Indicator 2 Channel digital speed indicator with switch to change the channel

Send Inquiry
Request To Call Back
Product Image (MTK- 1022TR)

TRI-FILAR SUSPENSION SYSTEM

Price: 100 INR/Piece

A uniform circular disc is suspended from the pendulum support frame by three parallel cords. Top ends of the cords pass through the three small chucks fitted at the top. Other ends are secured in the Tri-Filer disc. It is possible to adjust the length of the cord by loosening the chuck. Learning Objectives/Experiments: To determine the radius of gyration of tri-filar suspension. Required for Operation: Floor Area: 0.5 x 0.5 m. Technical Specifications: Circular disc: dia. 300 mm approx. Weights: 250 gms (3nos.), 750 gms (3 nos.) The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure

Send Inquiry
Request To Call Back
Product Image (MTK-101338)

JOURNAL BEARING APPARATUS

Price: 100 INR/Piece

The apparatus consists of a plain steel shaft excavated in a bearing and directly driven by a FHP Motor. The bearing is freely supported on the shaft and sealed at the motor end. The speed of the motor is controlled accurately by the speed control unit and it can be made run in both directions. Twelve equal-spaced pressure taping around the circumference and four along the axis are provided and are connected to manometer by PU Tubing so that the pressure head of oil in all tubes can be observed at a time. The bearing can be loaded by attaching weights to the arm supported beneath it. Experiments To study the pressure profile of lubricating oil at various conditions of load and speed Plotting the Cartesian polar pressure curves To measure the frictional torque and power transmit Utilities Required Electric supply: 230 V AC, Single Phase. Bench area: 1.5 x 1.5 x 4 m Tachometer to find out RPM of journal Oil SAE 40 about 5 Ltrs.

Send Inquiry
Request To Call Back
Product Image (MTK-101339)

UNIVERSAL GOVERNOR APPARATUS

Price: 100 INR/Piece

We offer optimum quality Universal Governor Apparatus to our valuable customers. This universal governor apparatus offered by us is commonly used for studying the working of different governors that normally. The set-up is designed to study the working of different governors normally used to control the speed. It consists of a main spindle, mounted vertically on the base plate. This spindle is driven by a variable speed Motor which is also mounted vertically on the same base plate. Anyone governor assembly out of four can be mounted on spindle. Speed control unit controls the spindle speed. A graduated scale is fitted to the sleeve to measure the displacement. Experiments Determination of characteristic curve of a sleeve position against speed of rotation for all governors To study the effect of varying the mass of the center sleeve in Porter and Proell Governor To study the effect of varying the initial spring compression in Hartnell Governor To study the determination of characteristics curves of radius of rotation against controlling force (Actual & Theoretical) for all governors Utilities Required Power Supply: 230 V AC, Single Phase. Floor Space: 1.5 x 1.5 m Tachometer to find out RPM

Send Inquiry
Request To Call Back
Product Image (MTK-101346)

MICHEL TILTING PAD BEARING APPARATUS

Price: 100 INR/Piece

Micro Teknik Our firm is offering Michell Tilting Pad Bearing Apparatus to our consumers. These are designed with utmost precision by our experienced professionals using ultra-modern machines and equipment. Before the final delivery, these products are stringently examined on various grounds by our quality analyzers to ensure their flawlessness. Available at a very low market rates.

Send Inquiry
Request To Call Back
Product Image (MTK-101340)

CORIOLLIS COMPONENT OF ACCELERATION APPARATUS

  • Automation Grade:Automatic
  • Color:Black Red Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Mounting Type:Floor Mounting
  • Power Supply:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
Send Inquiry
Request To Call Back
Product Image (MTK-101342)

EPICYCLE GEAR TRAIN APPARATUS

Price: 100 INR/Piece

We are one of the leading manufacturers, suppliers, traders and exporters of optimum quality Epicyclic Gear Train Apparatus. This apparatus is manufactured from high quality raw material, which is procured from high known vendors. The quality controllers rigorously check the apparatus on the in-house quality check points Power Supply: 220 V AC, Single Phase Floor Area: 1.5 x 2 m Motor: Variable speed DC Motor, 1 HP

Send Inquiry
Request To Call Back
Product Image (MTK- 101335)

STATIC & DYNAMIC BALANCING DEMONSTRATION

Price: 1000 INR/Piece

STATIC & DYNAMIC BALANCING DEMONSTRATION This equipment is designed for carrying out the experiment for balancing a rotation mass system. The apparatus consists of a steel shaft fixed in a rectangular frame. A set of four blocks with a clamping arrangement is provided. For static balancing, each block is individually clamped on shaft and its relative weight is found out using cord and container system in terms of number of steel balls. For dynamic balancing, a moment polygon is drawn using relative weights and angular and axial position of blocks is determined. The block are clamped on shaft is rotated by a motor to check dynamic balance of the system. The system is provided with angular and longitudinal scales and is suspended with chains for dynamic balancing. Experiments To balance the masses statically and dynamically of a single rotating mass system To observation of effect of unbalance in a rotating mass system Utilities Required Electricity 0.5kW, 220V, Single Phase

Send Inquiry
Request To Call Back
Product Image (MTK-101333)

CAM ANALYSIS APPARATUS

Price: 100 INR/Piece

CAM ANALYSIS APPARATUS Micro Teknik We are engaged in providing superior quality Cam Analysis Apparatus to our most reliable clients. These Cam Analysis Apparatus are appreciated by large number of clients due to high quality and durability. These products are available in market at most competitive rates. Descriptions Apparatus is a motorized unit consisting of a camshaft driven by a variable speed motor. The shaft runs in a double bearing. The free end of the camshaft has a facility to mount the cam easily. The follower is properly guided in gunmetal bushes and the type of follower can be changed according to the cam under test. Graduated circular protractor is fitted co-axial with the shaft. And a Dial Gauge fitted on the follower shaft is used to note the follower displacement for the angle of cam rotation. A spring is used to provide controlling force to the follower system. Weights on the follower shaft can be adjusted as per the requirement. An arrangement is provided to regulate the speed. The apparatus is very useful- for testing the cam performance for jump phenomenon during operation. On this apparatus the effect of change of inertia forces on jump action of earn-follower during operation can be observed. It is useful for testing various cam & follower pairs. Three cams and three followers will be supplied with the apparatus. These are already hardened to reduce the wear. Experiments With the help of combination of provided cams and followers following experiments can be conducted: To plot the n-Q (Follower displacement Vs Angle of rotation) curves for different cam follower pairs The follower bounce can be observed by using a stroboscope (Optional) & effect of follower weight on bounce can be studied. To study the effect of follower weight on bounce To study the effect of spring compression on bounce The tests can be repeated by changing compression springs, follower weights and cam speed. Utilities Required Electricity 0.5 kW, 220 V, Single Phase Stroboscope (Optional)

Send Inquiry
Request To Call Back
Product Image (MTK-101332)

UNIVERSAL VIBRATION APPARATUS

Price: 100 INR/Piece

UNIVERSAL VIBRATION APPARATUS We are engaged in the manufacturing and exporting of Universal Vibration Apparatus. To verify the relation of compound pendulum & to determine the radius of gyration. To study the forced vibration of simply supported beam for different damping. Descriptions The Universal Vibration apparatus provided comprehensive unit to perform the vibration experiments. A universal frame is provided upon which quick and easy assembly of various experiments can be done. The unit is self-contained to safely store spares. The students can easily assemble the experiments and study the theory of vibrations practically. Experimentation Following experiments can be performed with this unit: To verify the relation simple pendulum. To verify the relation of compound pendulum & to determine the radius of gyration. To study radius of gyration of bi-filar suspension. To study the undamped free vibration of spring mass system. To study the longitudinal vibration of helical coiled spring. To study the damped torsional vibration of single rotor system and to determine the damping co-efficient. To study the forced vibration of simply supported beam for different damping. Undamped torsional vibrations of single rotor system. Undamped torsional vibrations of double rotor system. Verification of Dunker leys Rule.

Send Inquiry
Request To Call Back
Product Image (MTK-101334)

WHILING OF SHAFT DEMONSTRATION

Price: 100 INR/Piece

WHILING OF SHAFT DEMONSTRATION The setup is designed to study the whirling of shafts. The set-up consists of a sturdy M.S. frame, variable speed motor bearing holders etc. Different bearing can be fitted in bearing block to have different end conditions i.e. (i) both end fixed, (ii) one end free and one end fixed etc. A variable speed motor is provided to drive the shaft along with speed control unit as the test is destructive, hence the shaft cannot be used again. Experiments Display of various modes of whril for a shaft with: Both ends directionally fixed. One ends fixed and other free Both ends directionally free. Modes of vibrations can be studied and frequency can be measured in each case. Utilities Required Floor area of 2m x 0.5 m Electric supply of 230V, AC

Send Inquiry
Request To Call Back
Product Image (MTK-101336)

MOTORIZED GYROSCOPE APPARATUS

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Supply:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
Send Inquiry
Request To Call Back
Product Image (101346)

Michell Tilting Pad Bearing Apparatus

  • Color:Black
  • Features:Long working life
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Supply:Electric
  • Usage:Industrial
Send Inquiry
Request To Call Back
Product Image (101344)

Milling Tool Dynamometer

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Supply:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Delivery Time:1 Week
  • Supply Ability:10 Per Week
Send Inquiry
Request To Call Back
Product Image (101345)

Drilling Tool Dynamometer

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Supply:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MT-101339)

Universal Governor Apparatus

Price: 100 INR/Piece

Universal Governor Apparatus We offer optimum quality Universal Governor Apparatus to our valuable customers. This universal governor apparatus offered by us is commonly used for studying the working of different governors that normally. The set-up is designed to study the working of different governors normally used to control the speed. It consists of a main spindle, mounted vertically on the base plate. This spindle is driven by a variable speed Motor which is also mounted vertically on the same base plate. Anyone governor assembly out of four can be mounted on spindle. Speed control unit controls the spindle speed. A graduated scale is fitted to the sleeve to measure the displacement. Experiments Determination of characteristic curve of a sleeve position against speed of rotation for all governors To study the effect of varying the mass of the center sleeve in Porter and Proell Governor To study the effect of varying the initial spring compression in Hartnell Governor To study the determination of characteristics curves of radius of rotation against controlling force (Actual & Theoretical) for all governors Utilities Required Power Supply: 230 V AC, Single Phase. Floor Space: 1.5 x 1.5 m Tachometer to find out RPM

Send Inquiry
Request To Call Back
Product Image (MT-101340)

Coriolis Component of Acceleration Apparatus

Price: 100 INR/Unit

Coriolis Component of Acceleration Apparatus

Send Inquiry
Request To Call Back
Product Image (MT-101335)

Static and Dynamic Balancing Apparatus

Price: 100 INR/Piece

Static And Dynamic Balancing Apparatus This equipment is designed for carrying out the experiment for balancing a rotation mass system. The apparatus consists of a steel shaft fixed in a rectangular frame. A set of four blocks with a clamping arrangement is provided. For static balancing, each block is individually clamped on shaft and its relative weight is found out using cord and container system in terms of number of steel balls. For dynamic balancing, a moment polygon is drawn using relative weights and angular and axial position of blocks is determined. The block are clamped on shaft is rotated by a motor to check dynamic balance of the system. The system is provided with angular and longitudinal scales and is suspended with chains for dynamic balancing. Experiments To balance the masses statically and dynamically of a single rotating mass system To observation of effect of unbalance in a rotating mass system Utilities Required Electricity 0.5kW, 220V, Single Phase

Send Inquiry
Request To Call Back
Product Image (MT-101338)

Journal Bearing Apparatus

Price: 100 INR/Piece

Journal Bearing Apparatus The apparatus consists of a plain steel shaft excavated in a bearing and directly driven by a FHP Motor. The bearing is freely supported on the shaft and sealed at the motor end. The speed of the motor is controlled accurately by the speed control unit and it can be made run in both directions. Twelve equal-spaced pressure taping around the circumference and four along the axis are provided and are connected to manometer by PU Tubing so that the pressure head of oil in all tubes can be observed at a time. The bearing can be loaded by attaching weights to the arm supported beneath it. Experiments To study the pressure profile of lubricating oil at various conditions of load and speed Plotting the Cartesian polar pressure curves To measure the frictional torque and power transmit

Send Inquiry
Request To Call Back
Product Image (MT-101334)

Whirling of Shaft Demonstrator Unit

Price: 100 INR/Piece

Whirling of Shaft Demonstrator Unit The set up is designed to study the whirling of shafts. The set-up consists of a sturdy M.S. frame, variable speed motor bearing holders etc. Different bearing can be fitted in bearing block to have different end conditions i.e. (i) both end fixed, (ii) one end free and one end fixed etc. A variable speed motor is provided to drive the shaft along with speed control unit as the test is destructive, hence the shaft cannot be used again. Experiments Display of various modes of whril for a shaft with: Both ends directionally fixed. One ends fixed and other free Both ends directionally free. Modes of vibrations can be studied and frequency can be measured in each case. Utilities Required Floor area of 2m x 0.5 m Electric supply of 230V, AC

Send Inquiry
Request To Call Back
Product Image (MT-101336)

Motorised Gyroscope Apparatus

Price: 100 INR/Piece

Motorised Gyroscope Apparatus Manufacturing done in compliance with the set industry norms and guidelines, the offered Motorised Gyroscope Apparatus has its quality highly standardized. The finest raw materials and modern machines applied in its making, give the product superior performance and a longer service life. In addition, the offered range is marked at the most reasonable rate possible. We are a prominent firm engaged in offering Motorized Gyroscope Apparatus. The product is provided with a stainless steel disc mounted on a horizontal shaft. The variable speed motor of the product is mounted on a trunnion frame having bearings in a yoke frame which freely rotates about its vertical axis. To maintain a proper balance, the apparatus is installed with a weight pan on the other side of the rotor disc which can be moved about three axis.

Send Inquiry
Request To Call Back
Product Image (101342)

Epicyclic Gear Train Apparatus

Price: 100 INR/Piece

Epicyclic Gear Train Apparatus: Micro Teknik We are one of the leading manufacturers, suppliers, traders and exporters of optimum quality Epicyclic Gear Train Apparatus. This apparatus is manufactured from high quality raw material, which is procured from high known vendors. The quality controllers rigorously check the apparatus on the in-house quality check points. Specification: Power Supply : 220 V AC, Single Phase Floor Area : 1.5 x 2 m Motor : Variable speed DC Motor, 1 HP

Send Inquiry
Request To Call Back
Product Image (101343)

Lathe Tool Dynamometer

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Supply:Electric
  • Usage:Lab Equipments
  • Voltage:230 Volt (v)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (101341)

Slip and Creep Measurement Apparatus

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Supply:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MT-101333)

Cam Analysis Apparatus

Price: 100 INR/Piece

Micro Teknik We are engaged in providing superior quality Cam Analysis Apparatus to our most reliable clients. These Cam Analysis Apparatus are appreciated by large number of clients due to high quality and durability. These products are available in market at most competitive rates. Descriptions Apparatus is a motorized unit consisting of a camshaft driven by a variable speed motor. The shaft runs in a double bearing. The free end of the camshaft has a facility to mount the cam easily. The follower is properly guided in gunmetal bushes and the type of follower can be changed according to the cam under test. Graduated circular protractor is fitted co-axial with the shaft. And a Dial Gauge fitted on the follower shaft is used to note the follower displacement for the angle of cam rotation. A spring is used to provide controlling force to the follower system. Weights on the follower shaft can be adjusted as per the requirement. An arrangement is provided to regulate the speed. The apparatus is very useful- for testing the cam performance for jump phenomenon during operation. On this apparatus the effect of change of inertia forces on jump action of earn-follower during operation can be observed. It is useful for testing various cam & follower pairs. Three cams and three followers will be supplied with the apparatus. Theses are already hardened to reduce the wear. Experiments With the help of combination of provided cams and followers following experiments can be conducted: To plot the n-Q (Follower displacement Vs Angle of rotation) curves for different cam follower pairs The follower bounce can be observed by using a stroboscope (Optional) & effect of follower weight on bounce can be studied. To study the effect of follower weight on bounce To study the effect of spring compression on bounce The tests can be repeated by changing compression springs, follower weights and cam speed. Utilities Required Electricity 0.5 kW, 220 V, Single Phase Stroboscope(Optional)

Send Inquiry
Request To Call Back
Product Image (MT-101332)

Universal Vibration Apparatus

Price: 100 INR/Piece

Universal Vibration Apparatus We are engaged in the manufacturing and exporting of Universal Vibration Apparatus. To verify the relation of compound pendulum & to determine the radius of gyration. To study the forced vibration of simply supported beam for different damping.

Send Inquiry
Request To Call Back
X


Quick Links
Our Products
View All
Contact Details
    MICRO TEKNIK

    GST : 06ACMPJ7244B1ZS

  • Plot No. 73, Vikaspuri, Industrial Area, Ambala Cantt - 133001, Haryana, India
  • Phone : 07971459233
  • Mr. Vikas (CEO)
  • Mobile : 07971459233
  • Send Inquiry Send Inquiry
    Send SMS Send SMS
    Back to top
    Tradeindia
    M/S MICRO TECNIK All Rights Reserved.(Terms of Use)
    Developed and Managed by Infocom Network Private Limited.