Steam Engine Models Manufacturer, Supplier, Exporter In Ambala Cantt, India

(MTS-101151)

Joy Valve Gear

Price: 100 INR/Piece

Joy Valve Gear : Microteknik is Manufacturer, Exporter & Supplier of Joy Valve Gear. It Is demonstration model with all metallic parts, mounted on well polished vertical wooden board. The model employs no eccentrics. The system is generally applied to locomotive engine.

Send Inquiry

Request To Call Back

(MTS-101148)

Stephenson Link Motion

Price: 5 INR/Piece

Microteknik is Manufacturer, Exporter & Supplier of Stephenson Link Motion. A demonstration model with all metallic parts mounted on a vertical polished wooden base board. The model employs two eccentrics and motion Is imparted to the link by means of two connected to the ends of the link. Link block Is connected to the slide valve. The reversal is effected by hand lever.

Send Inquiry

Request To Call Back

(MTS-101150)

Allan Link Motion

Price: 100 INR/Piece

Allan Link Motion : Microteknik is Manufacturer, Exporter & Supplier of Allan Link Motion.\ A demonstration model. It is combination of Stephenson and Gooch link motions. In this system the link Is straight and reversal Is effected by simultaneously moving the link block in opposite direction. With all metallic parts, mounted on a vertical well polished wooden board.

Send Inquiry

Request To Call Back

(MTS-101149)

Gooch Link Motion

Price: 5 INR/Piece

Gooch Link Motion : Microteknik is Manufacturer, Exporter & Supplier of Gooch Link Motion. A demonstration model with all metallic parts mounted on a vertical polished wooden board. The model employs two eccentrics and motion is imparted to the link by means of two rods connected to the ends of the link. Reversal is effected by means of two rods connected by means of hand lever.

Send Inquiry

Request To Call Back

(MTS-101152)

Walscharet Valve Gear

Price: 100 INR/Piece

Walscharet Valve Gear : Microteknik is Manufacturer, Exporter & Supplier of Walscharet Valve Gear. A demonstration model with all metallic parts, mounted on a vertical well polished wooden board. The model employs one eccentric. The gear system Is generally used In locomotive system. The reversal is effected by hand lever.

Send Inquiry

Request To Call Back

(MTS-101147)

Model of Corlis Valve Steam Engine

Price: 5 INR/Piece

Model of Corlis Valve Steam Engine : Microteknik is Manufacturer, Exporter & Supplier of Model of Corlis Valve Steam Engine This engine, from an estate, was disassembled when acquired by a former owner. He assembled the engine, replaced missing nuts with acorn nuts, built a custom oak base, re-gasketed the engine, painted it red and polished the steel and nickel parts. The present owner removed the oversize pulley wheel flywheel and replaced it with the flywheel presently mounted. The large flywheel will be included with the engine and may be adapted at the discretion of the new owner. The valve gear, governor, crosshead, wrist-plate, dashpots and other details are exquisitely machined and finished. The engine appears to be complete though needs to be shimmed and have the Corliss valve gear timed. A higher mahogany base should be considered to replace the present bright oak base with height provision for a larger flywheel to clear the bottom of the "pit." Details include: a single horizontal heavily-cast cylinder of approx 2" bore x 4" stroke, the cylinder with valve access plates, internal Corliss rotating cylinder intake and exhaust valves, highly detailed cylinder-head, top mounted 3/8" NPT throttle valve ( not original to engine though period), under-mounted exhaust, twin intake valve tripping plates each with spring loaded catch, cam and link rods, drop rods with brass bearing ends to cast base-mounted dash-pots, twin exhaust valve arms, each valve with detachable cylinder-plate, large center mounted wrist-plate with adjustable link rods each with threaded brass bearing ends to each valve plate. The cylinder supported on twin heavy cast A-frame supports with integral dash-pot supports. Note: The cylinder would be appropriately complemented by horizontal mahogany staving and brass banding. The intake valves with adjustable rods to governor pivot arm. The working governor is a work of art standing 10 1/2" tall from top of engine frame exquisitely executed with twin nickel on brass 1 1/2" diameter balls, highly detailed tapered column, brass upper and lower yoke arms, finely turned governor arms, smooth motion collar and rod linkage to intake valve linkage, 1 1/2" diameter brass flat-belt pulley, gear-driven shaft, girder-frame top-mounted brass idler pulley and other fine details. The heavy main cast girder frame with frame-incorporated heavy crosshead guides, the crosshead with pierced frame section a traditional design of full size engines, highly executed nickel-plated crosshead double tapered connecting rod with gibbed and cottered ends each with adjustable brasses, 3" teardrop design crank-arm, , heavy cast frame incorporated main bearing with detailed bearing insert shell and adjustable bearing-cap, the outboard bearing of same design each with brass oil-cup, 1" diameter crankshaft with 10" diameter x 2 1/2" face spoked flywheel (note: 16" spoked flywheel included though requires a higher base for clearance, see last photo).

Send Inquiry

Request To Call Back

(MTS-101144)

Model of Uniflow Steam Engine

Price: 100 INR/Piece

Model of Uniflow Steam Engine : Microteknik is Manufacturer, Exporter & Supplier of Model Of Uniflow Steam Engine. This demonstration model shows the working of a mild exhaust steam engine, The cylinder is sectionised and at each end drop valves are fitted through which steam enters. Complete with all important working parts level gears, cam shaft and levers etc. fitted on vertical well polished wooden board.

Send Inquiry

Request To Call Back

(MTS-101145)

Model of Drop Valve Steam Engine

Price: 10 INR/Piece

Model of Drop Valve Steam Engine : Microteknik is Manufacturer, Exporter & Supplier of Model Of Drop Valve Steam Engine. Sectional demonstration model. Separate team and exhaust valves are provided at each end of the cylinder four valves In all. Valves are driven by cams and give fixed points of admission, cut off. release and cushioning. The eccentrics are mounted on a shaft that Is operated with bevel gears. Complete fitted on a vertical well polished wooden board.

Send Inquiry

Request To Call Back

(MTS-101146)

Model Of Mayer Expansion Valve Steam Engine

Price: 100 INR/Piece

Model Of Mayer Expansion Valve Steam Engine : Microteknik is Manufacturer, Exporter & Supplier of Model Of Mayer Expansion Valve Steam Engine. The engine model Is equipped with two slide valves which are operated by separate eccentrics showing the double expansion plates the Mayer engine fitted on a threaded spindle and can be simultaneously brought closer and farther away from each other. All parts are of cast aluminium and fitted on well polished vertical wooden board. The design and operation of the Mayer Expansion valve steam engine can be conveniently studied with this section cut demonstration model.

Send Inquiry

Request To Call Back

(MTS-101140)

Steam Engine Model with a Boiler

Price: 100 INR/Piece

Steam Engine Model with a Boiler : Microteknik is Manufacturer, Exporter & Supplier of Steam Engine Model With A Boiler. Operation of a commercial steam engine is well illustrated with this working model. The extra large size unit Is provided with a horizontal boiler with a whistle, safety valve, steam gauge, heating lamp and a small dynamo model.

Send Inquiry

Request To Call Back

(MTS-101142)

Model Of Piston Valve Steam Engine

Price: 100 INR/Piece

Model Of Piston Valve Steam Engine

Send Inquiry

Request To Call Back

(MTS-101143)

Model Of Compound Steam Engine

Price: 100 INR/Piece

Model Of Compound Steam Engine : Microteknik is Manufacturer, Exporter & Supplier of Model Of Compound Steam Engine. A large size section cut demonstration model. H.P. cylinder is provided with a piston valve and L.P. with a 0 valve. Complete with jacketed receiver mounted on polished wooden board 65x50 cm In size approx.

Send Inquiry

Request To Call Back

(MT-101139)

Model Of Steam Engine

Price: 100 INR/Piece

Model Of Steam Engine : Microteknik is Manufacturer, Exporter & Supplier of Model Of Steam Engine. An all metallic and amusing working model. The brass cylinder is section cut and Is covered with a glass plate. Complete with working parts. piston, slide valve, link motion and reversing method can be observed. The movement of the wheel Is light enough to demonstrate working even by blowing with mouth.

Send Inquiry

Request To Call Back