M/S Micro Teknik
Send Inquiry Send SMS    Call Me Free
M/S Micro Teknik Banner
Compression Testing Machine Electrically Operated

Compression Testing Machine Electrically Operated

Product Details:

X

Compression Testing Machine Electrically Operated Price And Quantity

  • 1 Unit

Compression Testing Machine Electrically Operated Trade Information

  • Telegraphic Transfer (T/T) Cash in Advance (CID) Cheque Cash Advance (CA)
  • 100 Unit Per Week
  • 1 Week
  • Australia South America Eastern Europe Central America Africa Asia North America
  • All India

Product Description

Compression Testing Machine Electrically cum Hand Operated-Three Gauges :

This Compression Testing Machine is a hydraulic, electrically operated unit, designed for conducting compression tests on concrete specimens up to 20 cm. Diameter (or width and depth) and 30 cm, in height and also rocks and various other materials. Cold Crushing Strength (CCS) test is also possible in this Compression Testing Machine. 

The Compression Testing Machine consists of a steel cross head and cast iron base with two pillars connecting the base and cross head by means of nuts. The hydraulic jack of this Electric Compression Tester is fixed to the base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. 

Loading is accomplished by the upward movement with the help of a centering pin. Loading of Compression Testing Machine is accomplished by the upward movement of the motorized pumping unit is of plunger type and is connected to the jack by means of a steel connecting tube. 

A maximum red pointer is provided to facilitate taking of the readings after failure of specimens. The pressure gauges of 20 cm diameter with isolating valves are fixed on the pumping unit at an angle for easy readability. 

The Electric Compression Tester Machine is fitted with control which enables the rate of application of load to be varied. The Compression Testing Machine is equipped with facilities for hand operation as well. 

The electrical pumping unit is fitted with three micro switches one for each pressure gauge and will switch off the Compression Testing Machine automatically as the load on the machine approaches its full capacity of the gauge in case the isolating valves are not operated. This will protect the pressure gauges and the whole unit so that in case of breakdown of power supply, the machine will stop and will not restart unless the starting switch is operated. 

The Compression Testing Machine satisfies the essential specifications of Indian Standard No. 516-1959. For operation on415 Volts, 3-ph or 230 Volts, 1-ph A.C. 


Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Strength of Material Testing Equipments' category



trade india member
M/S MICRO TECNIK All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.