Cement Testing Equipment Manufacturer, Supplier, Exporter In Ambala Cantt, India

(MTCT-02)

Ball Mill

Price: 100 INR/Piece

Ball Mill MTCT-02 The ball mill works on the impact between the rapidly moving ball and the powder material bath enclosed in a hollow cylinder thus in the ball mill impact or attrition or bath are responsible for the size reduction. Technical Specification Paints and Inks Lacquers and Varnishes Appliance Coatings Carbon Paper Coatings Comparative ration of volume of balls to volume of material Drum Capacity 150 Liters Drum Rotation Speed 31-33 rpm Power 2.2 KW, 415 V, 3 Hp, 3 ph, 46 A.

Send Inquiry

Request To Call Back

(MTCT-20)

Briquette Briquette Testing Machine

Price: 99 INR/Unit

Tensile (Briquette) Testing Machine Tensile (Briquette) Testing Machine that is used for testing various materials like rubber, plastic and cable the offered testing machine is manufactured using optimum quality components and sophisticated technology in line with industry standards. Available with steel yard having double scale, this testing machine is checked on varied quality measures so as to maintain its quality. Technical Specification Capacity: 200 Newton Microprocessor based Digital read out for tensile strength Tensile force breaking length Elongation Operating voltage: 220 VAC, 50 Hz Power Electronic The machine can be made operation able for subsequent test only after bringing the sliding the weight to its zero position. Suitable for operation on 230 volts, 50 cycles, single phase, A.C. supply. Complete with one brass briquette mould and one base plate After fixing the briquette in the jaws, the machine is switched on 0-900 Kg. The instrument employs of friction free, accurate, double, lever system, the load being applied by means sliding weight on the top lever The capacity of the unit is 900 kgs.

Send Inquiry

Request To Call Back

(MTCT-111)

Concrete Thermometer

Price: 100 INR/Unit

Concrete Thermometer: MTCT-111 Temperature of concrete at the time of placement is important to control and to avoid many possible difficulties. In hot climates, it is important to measure the temperature of the fresh concrete to ensure it is not too hot, which could cause flash setting and rapidly reducing workability. Measurements are generally taken at the point of placement. FEATURES Mercury in Glass type or Alcohol in Glass type Dial type Digital type.

Send Inquiry

Request To Call Back

(MTCT-06)

Curing Compound Mould

Price: 10 INR/Unit

Curing Compound Mould: MTCT-06 Concrete curing compound consists essentially of waxes, natural and synthetic resins, and solvents of high volatility at atmospheric temperatures. The compound forms a moisture retentive film shortly after being applied on fresh concrete surface. White or gray pigments are often incorporated to provide heat reflectance, and to make the compound visible on the structure for inspection purpose. Curing compound should not be used on surfaces that are to receive additional concrete, paint, or tile which require a positive bond, unless it has been demonstrated that the membrane can be satisfactorily removed before the subsequent application is made, or that the membrane can serve satisfactorily as a base for the later application. Technical Specification Water retention Water loss Not more than 0.55 Kg/m2 Reflectance Note more than 4 hours. Drying time

Send Inquiry

Request To Call Back

(MTCT-09)

Heat Of Hydration Of Cement

Price: 100 INR/Unit

Heat Of Hydration Of Cement The chemical reaction that takes place between the cement and water is referred as hydration of the cement. The hydration reaction is an exothermic reaction. The cement hydration will liberate a considerable amount of heat. This is called as Heat of liberation or Heat of Hydration. The mixing of cement with water will result in rapid evolution of heat that will last for few minutes. This evolution of heat is probably due to the reaction of a solution of aluminates and the sulfates. This rapid heat and reaction are depressed by the addition of gypsum. The Early heat of hydration is due to the hydration of C3S. The hydration process is not instantaneous. The reaction is faster in the early stages and will go decreasing with the time period. It is observed that the complete hydration is possible only for cement particles that have a particle size smaller than 50 microns. With the increase in the fineness, there is an increase in the rate of hydration. Technical Specification Consists of a Dewar vessel, which is located in an insulation wooden box, an electrically driven stirrer with constant speed Funnel (Dewar vessel can be easily removed from the wooden box and replaced) Dimensions: 350 x 250 x 680 mm Power: 230V / 50Hz Does not include: Thermometer and stirring rod

Send Inquiry

Request To Call Back

(MTCT-18)

Laboratory Pulverizer

Price: 99 INR/Unit

Laboratory Pulverizer Laboratory Pulverize is a disc type grinder, designed to grind virtually any material to produce a fine mesh sample in one operation. It is a self contained grinder, with a rotary disc, having a planetary movement in a vertical plane. This feature gives added life to the moving parts and produces a sample of uniform fineness. Grinding is done between two discs, one of which is stationary and the other revolving eccentrically at high speed. The discs are made from heat treated machine metal. With the help of a convenient hand wheel, the six of the final product can be adjusted. This can be done, even while the machine is in operation. A self locking device holds the hinged grinding chamber in place and affords easy and quick access to it, for removal of ground samples & for cleaning. The Pulverize has a capacity of reducing about half a kilogram of Quartz type sample to 100 meshes in about minute. The Pulverize is supplied complete with a 3 H.P. Motor, a starter, š…"Vš Belt pulley drive and mounting wired for 440 Volts, 3 phase A.C. 50 Hz. Disc Diameter : 175 mm. Maximum feed Size : 6 mm Yield : 250 gms/min size of finished product. Technical Specification Maximum feed size is 1/4 inch grinding is done between two discs one of which is stationary and the other revolving eccentrically at high speed The apparatus is supplied with heat treated disc of 7 inches in diameter adjustment of size of product may be made by use of a convenient hand wheel while the machine is in operation or at rest A self locking device holds the hinged grinding chamber in place Reduces 1 pounds sample of quartz type material to 100 mesh in 1 minute It is a self contained grinder furnished with a rotating disc having a planetary movement in a vertical plane Voltage 440 Volts Belt Pulley drive and mounting

Send Inquiry

Request To Call Back

(MTCT-22A)

Vicat Needle Apparatus with Dashpot

Price: 100 INR/Unit

Vicat Needle Apparatus with Dashpot: MTCT-22A Vicat needle apparatus with dashpot is may be used the normal consistency of hydraulic cement in include of water required to prepare hydraulic cement pastes for testing. Apparatus consists of a frame having a movable rod with a cap at one end and at the other end the attachment which are interchangeable. Consistency is a measure of wetness or fluidity of cement. The main purpose of the consistency test is to determine the required quantity of water to obtain a standard or homogeneous paste and water quantity is enough to hydration process. The standard consistency of a cement paste is defined as that consistency which will permit the vicat plunger to penetrate to a point 10 +/- mm below the original surface in 30 s after being released. Technical Specification The apparatus consists of a metallic frame bearing a freely movable rod with a cap at top, one vicat mould, split type and glass base plate and one set of needles one each initial needle, final needle and consistency plunger. Consist of a metallic frame bearing a movable rod with cap at one end and a VICAT mould 70 mm in dia at the base, 50 mm at the top and 40 mm high and with a glass base plate consistency plunger, initial and final setting needles in a nice jeweler case. With dashpot to facilitate the gentle lowering of the needle. Power: Hydraulic,0.75kW Material: Steel Voltage: 380v

Send Inquiry

Request To Call Back

(MTCT-17)

Photometric Test Apparatus

Price: 100 INR/Piece

Photometric Test Apparatus: MTCT-17 Photometric has been conducting measurements and testing for civil and special purpose of lighting engineering and electro technical equipment in various fields, including photometric and colorimetric measurements, lighting engineering metrology, tests on firmness and durability of products to influence of external climatic and mechanical factors. Currently the structure of the Testing Centre includes a spectroradiometric and photometric laboratory a testing and control station and the office for metrology and standardization photometric operations centre possesses up-to-date photometric equipment, various test benches, climatic and mechanical test chambers. The centre was standardized in the “Voenelektronsert system for facultative certification of the electronics equipment, electronic and radio components, and defense materials. The centre conducts measurements and tests of illumination devices and light sources for civil and special purposes photometric Testing Centre equipment, which is employed for tests and measurements, undergoes annual calibration at the Federal State Institution “ROSTEST and the Russian National Research Institute for Optical and Physical Measurements The Testing Centre team consists of highly qualified specialists that have a degree in lighting engineering and specialize in the field of photometry, light sources and illumination engineering design. Technical Specification Spherical photometric integrators with diameters ranging from 0.5 to 2 meters Photometric benches Standard lamps to measure luminous intensity (SIS type) and luminous flux (SIP type) Stabilized sources for AC and DC voltage Spectral colorimeter Iluminance meters, UV-radiometer Pulse meter Digital and analogous active power meters, ampere meter Multi meters and other devices and accessories

Send Inquiry

Request To Call Back

(MTCT-19)

Reflectance Meter

Price: 100 INR/Piece

REFLECTANCE METER: MTCT-19 Whiteness is measured in terms of diffuse reflectance, which is the ratio of reflected light measured at 90 after passing through a suitable filter and the incident light that is generally 0 at 45 to the surface of the sample. Technical Specification Light Source Long Life LED Detector Sealed Silicon Photo Detector Diffuse Reflectance 00.0 to 100.0 with negative & over range indication, 3.5 digits LED (with decimal display) Accuracy (± 1%) Operating Voltage 230V, 50 Hz

Send Inquiry

Request To Call Back

(MTCT-14)

Length Comparator

Price: 100 INR/Piece

Length Comparator MTCT-14 The relatively small difference in central length between a reference gauge black of known central length and another gauge of unknown central length is measured by a high resolution length indicator the scope of this test is the determination of the effect of aggregates on the drying shrinkage of cement. The instrument consists of an analogue or digital dial gauge which is mounted on a steel frame. The top anvil is adjustable to suit the required specimen. A two gang shrinkage mould, 25x25x285 mm size (250mm gauge length), is made of steel. The mould and steel inserts should be ordered separately. Also available is a reference rod, 300mm long with convex hemispherical ends. The comparator is available in two models one with 0.01 mm x 10mm analogue dial gauge or with 0.001mm x 20 mm digital dial gauge. Technical Specification Effect of aggregates in drying shrinkage of concrete Thermal expansion Hydraulic shrinkage of cement mortar Shrinkage determination of grouts for tiles Expansion of Portland cement Length change of hardened cement paste Restrained expansion f mortar Potential reactivity of aggregates The instrument consists of a channeled base over which two vertical pillars are fixed An adjustable cross plate is at the top A dial gauge, reading to .002 mm x 12 mm. can be fixed to the top cross plate The plunger end of the dial gauge can be located upon a 6.5 mm diameter ball or other reference point cemented in the specimen On the base there is a similar recessed seating in which can be placed a second ball or reference point in the specimen Complete with a stainless steel standard bar with insulated grip and with 6.5 mm diameter balls mounted in the ends The unit can be supplied with a .0001 inch x 1/2 inch dial gauge at extra cost if indicated at the time of placing the order

Send Inquiry

Request To Call Back

(MTCT-13)

LE Chatelier Mould

Price: 10 INR/Piece

LE Chatelier Mould MTCT-13 Cement of good quality does not contain the impurities like free lime, magnesia and sulphates, so this should be checked before use. When it contains the impurities named above, it can expand after reacted with the water, which will result in the unwanted results like, cracking, unwanted expansion of the dimensions and lower strength. Prepare a cement paste of 78% of standard consistency of the cement, and fill it into the split brass cylinder. Cover the top and bottom of the cylinder and put it in water at 27 degrees Celsius for 24 hours. After 24 hours, measure the separation between the two indicators at their pointed ends. Then heat the whole water and immersed cylinder with paste up to a boiling temperature in 30-35 minutes and then boiling for 3 hours. After cooling it down, again measure the separation between the two pointers. Technical Specification Temperature 27 ï 2 C Humidity 65 ï 5 % Volume expansion in cement mortar or in cement concrete is caused by the presence of UN burnt lime (CaO), dead burnt MgO and also CaSO4. By Le-chatelier method we can only find out presence of un burnt lime (CaO). Presence of UN burnt lime may develop cracks in the cement because of increase in volume. Free lime (CaO) and magnesia (MgO) are known to react with water very slowly and increase in volume considerably, which result in cracking, distortion and disintegration Two parallel demonstrating arms with pointed closures are connected.

Send Inquiry

Request To Call Back

(MTCT-12)

L-Box Test on Self Compacting Concretec

Price: 10 INR/Piece

L-Box Test on Self Compacting Concrete: MTCT-12 The L-box is one test method developed to assess the passing ability and blocking resistance of SCC (bill berg) the geometry of the L-box applied for the investigations presented in this paper a moveable gate divides the vertical and the horizontal section the vertical section is fitted with concrete to flow past the reinforce cement bars and in to the horizontal section the diameter and spacing of the reinforce cement bars may be varied according to the reinforcement configuration in the actual structure. Technical Specification Flow ability slump-flow test Viscosity (assessed by rate of flow) T500 slump flow test or V-funnel test Passing ability L-box test Segregation resistance (sieve) test

Send Inquiry

Request To Call Back

(MTCT-11)

Humidity Chamber

Price: 100 INR/Piece

Humidity Chamber MTCT-11 Humidity Chambers are designed for testing of electronic, electrical components, corrosion studies on mechanical parts, shelf life studies on paints, varnishes and cement at respective manufacturing facilities. These chambers control precise temperature and humidity seed Germinators are used for germination & biological studies, which include UV, Fluorescent lights coupled with 24 hours cyclic timer for lights on/off regulation. Technical Specification Humidity range 40% to 95% RH Supply and Drain Must be provided with a water line and floor drain negligible consumption. Water Recirculation System (optional) provides a reliable supply of filtered water for the humidity system. Perfect for installations where water line and drain are not available. Uniformity ±1C Control Tolerance ±0.5C (±0.2C Typical) Temperature Range -73C to +175C

Send Inquiry

Request To Call Back

(MTCT-10)

Teknik Humidifier

Price: 100 INR/Piece

Humidifier MTCT-10 The process in which the moisture or water vapor or humidity is added to the air without changing its dry bulb (DB) temperature is called as humidification process. This process is represented by a straight vertical line on the Psychometric chart starting from the initial value of relative humidity, extending upwards and ending at the final value of the relative humidity. In actual practice the pure humidification process is not possible, since the humidification is always accompanied by cooling or heating of the air. Humidification process along with cooling or heating is used in number of air conditioning applications. Let us see how these processes are obtained and how they are represented on the Psychometric chart. Technical Specification Material of Constructions Stainless Steel Motor Single Phase, 2800 RPM Capacity 3 Liter 5 Liter Heated pan humidifier Isothermal Direct steam injection humidifier Isothermal Electrode humidifier Isothermal Electric resistance humidifier Isothermal Ultrasonic humidifier Adiabatic, atomizing Compressed air nozzle humidifier Adiabatic, atomizing Pressurized water humidifier Adiabatic, atomizing Centrifugal atomizing humidifier Adiabatic, atomizing Rigid/wetted media humidifier Adiabatic, evaporative

Send Inquiry

Request To Call Back

(MTCT-24)

Gillmore Needle Apparatus

Price: 100 INR/Piece

Gillmore Needle Apparatus: MTCT-24 It may be define as the Gillmore Needle Apparatus is used to determine initial and final times of setting of Portland cement, masonry cement, hydraulic hydrated lime, and certain mortars. The adjustable-position support has sets of horizontal arms to guide two weighted needles with flat-end cylindrical stainless steel tips. Features Low maintenance cost Easy to install High performance

Send Inquiry

Request To Call Back

(MTCT-16)

Cement Mortar Mixer

Price: 100 INR/Unit

Cement Mortar Mixer Mortar is a material used in masonry construction to fill the gaps between the bricks and blocks used in construction. Mortar is a mixture of sand, a binder such as cement or lime, and water and is applied as a paste which then sets hard. Form mortar which is used for constructions exposed to aggressive and waste waters. Cement mortars are used for plastering, rendering smooth finishes and damp proof courses.

Send Inquiry

Request To Call Back

(MTCT-102)

Air Entrainment Meter

Price: 100 INR/Unit

Air Entrainment Meter: MTCT-102 Air content of fresh concrete is normally measured, by the use of a special air meter, to assess whether the concrete contains the required amount of air. This would be measured when air„s entrapment or entrainment is required by the concrete design. The method uses the principle of replacing the air in a known volume of concrete with water, the volume of which can then be measured. TECHNICAL SPECIFICATION The apparatus consists of a pressure tight flanged cylindrical measuring bowl of specified volume in accordance with size of aggregate to be tested. The bowl is fitted with a removable flanged conical cover assembly with the help of a airtight sealing gasket. The conical cover has an air valve and a pet cock for bleeding off the water. A transparent cylindrical stand pipe, which is graduated in air content, is fixed to the conical cover assembly. Pressure is applied to the specimen with the help of pressure bulb and the pressure is recorded on the pressure gauge which is mounted on the stand pipe. The whole assembly is mounted on a flat base.

Send Inquiry

Request To Call Back

(MTCT-23)

Water bath for LE Chatlier Flask

Price: 100 INR/Unit

Water bath for LE Chatlier Flask MTCT-23 Le Chatelier Water Bath is used with Le Chatelier moulds for the determination of the soundness of cement paste fly ash for concrete and lime. The internal chamber and the insulated exterior case of the bath are manufactured from stainless steel. The Bath is capable of reaching boiling point in 30 minutes by using two heater units. There is a timer on the Le Chatelier Water Bath which is used to set the time for reaching the boiling point. After that time the temperature of water is regulated by using one heater unit to conserve energy. Technical Specification Water bath for Le Chatlier Flask is made from High Grade Durable Material and Give Optimum Performance Power 1250 W

Send Inquiry

Request To Call Back

(MTCT-101)

Accelerated Curing Tank

Price: 100 INR/Unit

Accelerated Curing Tank: MTCT-101 The strength of concrete is generally estimated after 28 days by crushing field test cubes or cylinders made from the representative concrete used for the structure. The utility of ascertaining strength after 28 days is often questioned since by this time considerable concrete would have been placed and work may have progressed. It is then rather too late for remedial measures. It is therefore of tremendous advantage to predict 28 days strength within a few hours of casting the concrete so that, we have a good idea about the strength of the concrete. The rate of gain of strength of concrete depends on the reaction rate of cement and additions with water (Hydration). In common with all chemical reactions, the rate of reaction depends on reaction of temp. Higher reaction temperature gives higher rate of reaction e.g. the concrete gains strength more rapidly when it„s temp. is higher. Accelerated curing is the process by which the temperature of the concrete is raised artificially by applying external heat to speed up the rate of gain in strength. The test method covers procedures for curing test specimens of concrete stored under conditions intended to accelerate the development of strength. The procedures are: Procedure A- Warm Water Method, Procedure B-Boiling Water Method. Specification Accelerated Curing Tank Accelerated Curing Tank having capacity to accommodate 6/12/18 Concrete Cubes of 150mm size with a facility for accelerated curing by Boiling water method up to temperature range: 100 +/- 2 deg.C It will have capacity for curing by warm water method at temperature 55 +/- 2 deg.C Tank will consist of a rectangular double walled metal cabinet, inside lined with stainless steel, outer powder coated. Easily replaceable high Wattage heaters are mounted inside the chamber. A slow speed stirrer is provided to circulate water inside the chamber to maintain the uniform temperature of water. A strong stainless steel perforated platform is provided for keeping the cubes and also have a lid with lifting handle to cover the chamber. The temperature is indicated and controlled by a DIGITAL auto tuning PID Temp. Controller with soak timer to control the duration of heating and then to shut down the system without manual attendance. The front panel will have power supply indicating lamp, control action indication lamp and one main switch. Suitable for operation on 220 V, 50 Hz single phase, AC supply or 440 V 50 Hz, three phase AC supply, for bigger size of curing tank.

Send Inquiry

Request To Call Back

(MTCT-26)

Wet Sieving Test Apparatus

Price: 100 INR/Unit

Wet Sieving Test Apparatus (Fineness of Fly Ash Testing Apparatus): MTCT-26 Wet Sieving method is recommended for determining the Fineness of Fly Ash using 45micron sieve as recommended in various international standards. In this instrument, wet sieving is done using 45micron Sieve, Spray Nozzle, Pressure Gauge & Water source. Technical Specification Wet sieving, comprises a special stainless steel sieve, 0.045 mm opening, a spray nozzle 17.5 mm dia. with 17 holes 0.5 mm dia oriented and spaced conforming to the specifications a pressure gauge 80 mm dia. Fittings for connection to the water supply. Remain unchanged by heat up to 110C

Send Inquiry

Request To Call Back

(MTCT-25)

Water Retention Test Apparatus

Price: 100 INR/Unit

Water Retention Test Apparatus: MTCT-25 Water retention testing is used to determine the ability of mortars and plasters to retain water under suction. The test results are used to determine compliance and specifications. The results obtained from the test method do not necessarily indicate the degree of water retention when used with masonry units, since the amount of water absorbed by the unit depends on the rate of absorption of the masonry unit. The water retention apparatus is used in specification tests of masonry cement and physical testing of quicklime and hydrated lime. The unit incorporates a vacuum regulator and gauge system as opposed to using a mercury manometer and relief column. The bleeding rate apparatus is used to determine the rate and bleeding capacity of cement paste and mortar by direct and continuous procedure. Technical Specification Displacement gauge- indicate the vertical displacement Top plate-fix displacement gauge Base plate-place ceramic disk and collect water Water supply tank- Deminerlized water Vacuum generator-generate vacuum

Send Inquiry

Request To Call Back

(MTCT-22)

Vicat Needle Apparatus

Price: 100 INR/Piece

Vicat Needle Apparatus: MTCT-22 Vicat needle apparatus is used to find out the consistency, initial setting time and final setting time of the cement. In the normal consistency test we have to find out the amount of water to be added to the cement to form a cement paste of normal consistency. Vicat„s apparatus consists of an arrangement to hold the plunger of 10 mm diameter and two other needles which are made to freely fall into a mould filled with the cement paste and the amount of penetration of the needles of plunder can be noted using the vertical graduations from 0 mm to 50 mm. When the penetration is of about 42 to 45 mm or when the reading on the vertical graduation is about 5 mm to 7 mm that means cement is of normal consistency. Generally the water required to form a paste of normal consistency is 30%. Technical Specification High alumina The apparatus consists of a metallic frame bearing a freely movable A cap at top, one vicat mould and glass base plate and one set of needles one each initial needle, final needle and consistency plunger. It comes with a dashpot which facilities gentle lowering of the needles Super sulphated Low heat Masonry cement Ordinary Rapid hardening

Send Inquiry

Request To Call Back

(MTCT-28)

Standard Spatula

Price: 5 INR/Piece

Standard Spatula: MTCT-28 Standard spatula may be defined as the Used while casting a cement briquette this spatula is manufactured using the best quality steel blade and modern technology in sync with industry standards. A wooden handle is fixed to the stem of blade, this spatula is quality checked on various parameters in order to ensure its quality. Technical Specification It shall be made of stainless steel with wooden handle. The standard spatula consists of a steel blade of a special shape. A wooden handle is fixed to the stem of blade. This test method covers the determination of the oil absorption of pigments by the spatula rub-out technique.

Send Inquiry

Request To Call Back

(MTCT-05)

Compression Testing Machine

Price: 100 INR/Piece

Compression Testing Machine (500 KN CAPACITIES) MTCT-05 Compression Testing Machines are used for crushing the test specimen. Design engineers carefully design concrete for a particular compressive strength and applying load in compression Testing Machine tests specimen. We manufacture a range of Compression Testing Machine from 10 Tones to 300 Tones and dial gauge to digital. Portable models are also available for field uses that operate manually, without electricity. Technical Specification Compression Testing Machine, hand operated, 250 KN (25 tonne) Channel Model double plunger pump with hydraulic Load gauge. Channel type Four pillar types of different capacities Channel type compression testing machine with standard poly hydro pump Channel type hand cum electrical machine with single gauge Four pillar type compression testing machine with single gauge Channel type hand cum electrical machine with double gauge Four pillar type machine electrical machine with double gauge Channel type machine cum electrical operated with single gauge cum digitally operate

Send Inquiry

Request To Call Back

(MTCT-21)

Vibrating Machine

Price: 100 INR/Piece

Vibrating Machine: MTCT-21 Vibrating machine is used for the preparing of mortar cubes for the determination of compression strength of ordinary and rapid hardened Portland cement, low heat Portland cement, Portland blast furnace cement and high alumina cements. Technical Specification 2x150w Ac motors Fiber Glass Frame Frequency setting 30,35,40,45Hz Time Setting 30s,60s,90s,300s Amplitude High and Low Handlebar Cover HDR or Dipping Remote Control/Transportation Wheels/Exercise Mat can be attached Foot Print L700xW700xH1340mm Plate Useable Scope:600x435mm The complete frame assembly consists of a vice to hold a 7.06cm cube mould and two studs threaded at top and a hopper to feed the sample in the mould This assembly is supported on four springs and has an in built rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame A balance weight is an integral bottom part of the frame The centre of gravity of the assembly is brought to the centre of the eccentric shaft or within a distance of 25mm below it The electric motor drives the shaft of the frame and thus imparts required vibrations to the mould. The frequency of vibration is 12000+/-400 vibration per minute Supplied complete with on 7.06cm cube mould with loose base plate, a time switch 0-5mins x 1min and certificate of vibration from a standard laboratory Spares : Set of Springs, Belt and Belt guard The machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base

Send Inquiry

Request To Call Back

(MTCT-08)

Gauging Trowel

Price: 4 INR/Piece

Gauging Trowel MTCT-08 A tool used to apply cement mortar or plaster in awkward areas where a floating or setting trowel cannot be used. Often used when doing mould work. Gauging trowels are like a smaller version of the large trowel used in bricklaying but with a rounded end. They come in sizes from 100 mm to 225 mm. Technical Specification OX Grip handle with finger protection for extreme comfort and reduced fatigue Flexible precision taper ground blade with welded shank Hard end handle for tapping in bricks Solid forged steel blade for ultimate strength Designed for mixing (gauging) mortar or plaster Blade Material Carbon Steel Trowel Handle Material Plastic Handle Gauging Trowel

Send Inquiry

Request To Call Back

(MTCT-07A)

Flow Table Motorised

Price: 10 INR/Piece

Flow Table Motorized: MTCT-07A The flow table determining the flow of Portland cements concrete. Consists of flow table a top 76.2cms (30³) dia finely machined from solid brass/gunmetal casting. The stand is fabricated out of cast iron/mild steel and is of study construction. The ground and hardened steel cam is designed to drop the table by 12.5 mm. complete with flow mould with handles with one tamping rod 0-60cms long X 16 mm dia. Electrically operated to raise and drop the table top. Technical Specification Power W 180 Electrical 1 phase / 200 watts Consists of a steel table top 76.2cm (30 inch.dia) finely machined The integral cast ribs are designed for support and strength The stand is fabricated out of cast iron and is study construction Holes for mounting in foundations are drilled in the base plate The ground and hardened steel cam is designed to fit and drop the table by 12.5mm Electrically operated to raise and drop the table top approx 15 times in 15 second Suitable for operation 230 volts 50 cycles A.C. supply

Send Inquiry

Request To Call Back

(MTCT-07)

Flow Table

Price: 100 INR/Piece

Flow Table: MTCT-07 This test set is used for concrete mixes with high workability. The test determines the flow index as a mean measurement of the diameter of the specimen after working on the flow table the apparatus consists of a double steel table, the upper table measuring 700x700mm and hinged at one side to the lower table. The top table is inscribed to allow measurement of the flow. All parts are protected against corrosion. The Stainless Steel cone has a top 130mm diameter 200mm base diameter and is 200mm high supplied complete with wooden tamping rod. Technical Specification Table Dia. 254 mm / 300 mm Cone Top/Base Dia. 70 mm / 100 mm Cone Height 50 mm / 60 mm

Send Inquiry

Request To Call Back

(MTCT-106A)

Compression Testing machine Pillar Type

Price: 100 INR/Unit

Compression Testing Machine " Hand Operated Pillar Type: MTCT-106A This machine is quite useful on field Laboratories or mobile testing laboratories or Vans which frequently change site or location. It is particularly useful where constant and consistent Electric power is not available. The load is applied manually and observed on a Pressure gauge. The Pressure Gauge has maximum load indicator which stand still even after the specimen under test crushes and has to be set to zero manually. Features of Compression Testing machine Pillar Type High Stability Self-aligning platen assembly. Gauges are calibrated in Kilo Newton against certified Proving Ring. Suitable for testing cubes of various sizes Using special platens, bricks also can be tested. Hard chrome plated piston with new type of long life oil seal. Four Pillar Model " superior in design, reliability and accuracy Practically no welded parts, all joints reinforced with heavy nut/bolt to withstand occasional over loading and to ensure center loading. Rounded Corners " add to elegance and safeguard against injury Hardened and grinded platens with guide lines for placing sample for Testing

Send Inquiry

Request To Call Back

(MTCT-107)

Concrete Mixer Laboratory Type

Price: 100 INR/Piece

A concrete plant, also known as a batch plant, is a device that combines various ingredients to form concrete. Some of these inputs include sand, water, aggregate (rocks, gravel, etc.), fly ash, potash, and cement. There are two types of concrete plants: ready mix plants and central mix plants. A concrete plant can have a variety of parts and accessories, including but not limited to: mixers (either tilt-up or horizontal (or in some cases, both), cement batchers, aggregate batchers, conveyors, radial stackers, aggregate bins, cement bins, heaters, chillers, cement silos, batch plant controls, and dust collectors (to minimize environmental pollution). TECHNICAL SPECIFICATION Cast Iron Heavy Duty Hopper 10 Gauge Engine Air Cooled Cover MS Sheet, 14 Gauge Safety for Engine Drum 10 mm plate, Capacity is one bag Classic Heavy Duty Pan mixer Mixer Muller

Send Inquiry

Request To Call Back

(MTCT-04)

Cement Autoclave

Price: 100 INR/Piece

Cement Autoclave: MTCT-04 The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated over, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions " 10.5cm diameter x 40. 5 cm heights suitable for operation on 230 v, 50 hz single phases, a. C. Supply supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner heating units. Technical Specification Electrical 120 VAC 1800 W Power supply AC: 220V, 50HZ The power of the light: 16W Input power: less than 20W Capacity: 0-999 Stainless Steel Chamber

Send Inquiry

Request To Call Back

(MTCT-03)

Blain Air Permeability Apparatus

Price: 100 INR/Piece

Blain Air Permeability Apparatus: MTCT-03 The Blaine air permeability apparatus is used to determine the fineness of Portland cement in terms of the specific surface expressed as total surface area in square centimeters per gram of cement. The Blaine apparatus draws a defined volume of air through a prepared bed of cement of defined porosity. The Blaine air-permeability apparatus consists essentially of a means of drawing a definite quantity of air through a prepared bed of cement of definite porosity. The number and size of the pores in a prepared bed of definite porosity is a function of the size of the particles and determines the rate of airflow through the bed. The apparatus illustrated. Technical Specification Fineness of cement has a great effect on the rate of hydration and hence the rate of gain of strength. Fineness of cement increases the rate of evolution of heat. Finer cement offers a great surface area for hydration and hence faster the development of strength. Increase in fineness of cement also increases the drying shrinkage of concrete and hence creates cracks in structures. Excessive fineness requirement increases cost of grinding. Excessive fine cement requires more water for hydration, resulting reduced strength and durability. Fineness of cement affects properties like gypsum requirement, workability of fresh concrete & long term behavior of structure. Coarse cement particles settle down in concrete which causes bleeding. Approximately 95% of cement particles are smaller than 45 micrometers, with the average particle around 15 micrometers. In the early 1900s, cement fineness was expressed as the mass of cement per fractional size (percent weight retained on specific sieve sizes). Now a day„s fineness is usually measured by the Blaine air-permeability test that indirectly measures the surface area of the cement particles per unit mass. Cements with finer particles have more surface area in m2 per kg of cement.

Send Inquiry

Request To Call Back