trusted seller
Send Email

Chemical Engineering Laboratory Equipments

Our standard grade Chemical Engineering Laboratory Equipments is used to conduct batch enzyme based reactions to analyze and demonstrate different attributes of enzyme. Known for their reasonable price, these lab equipments support data logging function and these provide learners the opportunity to experience real time monitoring of chemical reactions. These Chemical Engineering Laboratory Equipments are equipped with heat exchanger with energy efficient operation, in built hot water unit, condenser and boiler. These adopt nichrome made wire for fast heating of their heaters.
Product Image (MTS-912)

AEROBIC DIGESTER APPARATUS

Price: 100 INR/Piece

Aerobic Digester consists of a 2 gallon reactor vessel mounted on a steel base, with a liquid feed pump, air supply, and instrumentation for monitoring and controlling the process. The cylindrical wall of the reactor is made from 2 layers of porous plastic material to retain the suspended solids, while allowing treated water to pass through to the outer, annular exit chamber. This design allows the essential features of the aerobic treatment process to be studied without the distractions of having to settle the solids adequately enough for external recycle, a well-known laboratory problem. The porous liners are removable for cleaning, and a spare liner is supplied. Waste water is drawn from a feed tank by a 120V motor driven peristaltic pump. Flow rate is controlled by a variabe run time control that determines the minutes of run time within a 10 minute cycle. The pump delivers the feed to the reactor vessel through a transparent lid. Air is supplied at a measured rate by a small air pump, and discharges into the base of the reactor via an air distribution device. This provides the necessary oxygen for the digestion process, as well as produces sufficient bubbling for stirring and reaction. The liquid level in the reactor is maintained at a constant value of 1 or 2 gal. by an overflow device connected to the outer annular chamber of the vessel. Discharge is by gravity to a floor-standing product tank (not supplied). The reactor temperature is maintained by a 3-term PID controller which varies power to an immersion heater within the vessel. Any temperature between ambient and 95F may be selected, with the best conditions being a few degrees above the diurnal maximum in the user™s laboratory. Dissolved oxygen and pH probes and meters are included. The reactor lid contains a gas exit port, suitable for sampling the gases for subsequent analysis Feed pump 120V, peristaltic, 10 rpm, variable run time control corresponding to 0“13 gal. Per day Air pump 240V/120V, 0“1.35 gpm Reactor vessel 2 gal. maximum capacity pH meter Range 0.00 to 14.00 Dissolved oxygen meter Range 0“100% saturation, resolution 2%Reactor heater Electrical immersion 250WTemperature controller 3-term PID, temperature limit set at 95F

Send Inquiry
Request To Call Back
Product Image (MTK-5522AU)

AERATION UNIT APPARATUS

Price: 100 INR/Piece

The set-up consists of an open water tank with variable speed paddle mixer. Air is supplied to the water from the bottom and mixed in the water by operating stirrer. Speed of the stirrer can be controlled with the help of speed controlled provided in the Panel. Flow of air entering in the water tank is directly metered with the help of Rotameter and can be regulated by means of Valve provided in the set-up. Three air diffusers of different types are provided with the set-up and are interchangeable. Desired diffuser can be easily installed on the air inlet to the water tank. A Temperature Indicator is also provided which gives the direct reading of water temperature. The present set-up is complete in all respect to demonstrate the oxygen transfer characteristics of diffused air system. A battery powered Dissolved Oxygen Meter accompanies the apparatus which allows to conduct the experiment with ease Product Specification Capacity: 25 ltr Type: NA Power: 220V AC 1 PHASE Application: LAB EXPERIMENT Country of Origin: Made in India

Send Inquiry
Request To Call Back
Product Image (MTK-9747MS)

MODEL SEDIMENTATION TANK

Price: 100 INR/Piece

The apparatus is designed to demonstrate the hydraulic characteristics and settling efficiencies of a model settling basin. The apparatus consists of a Sedimentation Tank in which the water is fed by overhead tank (available in user laboratory and not in scope of supply) at constant flow rate and is measured with the help of a Rotameter. A complete unit for slurry circulation in sedimentation tank also accompanies the set-up including a sump tank for slurry, a feed pump for slurry. Flow rate of slurry entering the sedimentation tank is metered by suitable device. An accurate dye injection system is provided to inject the known volume of dye in the sedimentation tank. In sedimentation tank a weir is fitted which facilitate to the entry of well mixed slurry of known concentration in sedimentation tank uniformly. Product Specification Material: pvc/ss Type of Service Contract: Project Based Dimension: 6X4X5 FEET Usage/Application: LAB EXPERIMENT Current: 220V Cylinder: NA

Send Inquiry
Request To Call Back
Product Image (MTK-9745DS)

DRAINAGE & SEEPAGE TANK APPARATUS

Price: 100 INR/Piece

The present set-up is designed to study the flow through permeable media. This apparatus consists of a tank whose bed is made from Stainless Steel. The sides of the tanks are supported and sealed so that it allows free access to the interior. One side of the tank is of Toughened glass to give good scratch free visibility over a long period of use and minimum sight obstruction. Second side is of Stainless Steel and required pressure tapings are mounted on the same. The tank has two adjustable overflows close to the each end so that constant head of water can be maintained in each half of the tank. These may be lowered to a position close to the bed of the tank for some experiments to provide sub soil drainage. Present set-up is self-contained water circulating unit with sump tank, Pump, flow control valve etc. Product Specification Drainage or Seepage Tank: Length 1500 mm Width 100 mm Tank Base: Stainless Steel or Aluminum Front Side: Toughened Glass (Front Side) Back Side: Stainless Steel Sump Tank: Stainless Steel, Capacity 100 Ltrs. Pump: FHP Pump, Crompton Make.

Send Inquiry
Request To Call Back
Product Image (MTS-907)

SEDIMENTATION STUDIES APPARATUS

Price: 100 INR/Piece

When a particle fall in a fluid under constant force, e.g. force of gravity, then particle accelerates for some time, but when the accelerating force equals the retarding force (Buoyant force and Drag force) then the resultant force acting on the particle will be zero, and particle quickly reaches velocity, which is the maximum attainable under the circumstances and which is called the terminal velocity. When slurry is prepared in a container and then allowed to remain undisturbed for some time, four settling zones will appear as below: A Supernatant Layer C Transition Zone B Slurry Zone D Concentration Sludge Zone. With the passage of time, the height of the different zones will vary and ultimately zone A of clear liquid and zone D of the sludge will be left. When all the solid particles settle in zone D, then this is critical stage and after this no settling takes place. With further passage of time, the height of the zone D will decrease due to the compression of the sludge on account of its own weight. Settling can be free settling or hindered settling. But most of the slurries settle under hindered conditions. Free settling is that in which the motion of one particle is unaffected by the motion of the other particle while in case of hindered settling many particles are present so there is mutual interference in the motion of the particles and the velocity of motion or rate of settling is reduced. The present set-up with 5 Nos. of Borosilicate Glass Graduated Cylinders is designed to study the zone settling depending upon the concentration and characteristics of the particles. These cylinders can be easily removed for cleaning. Rate of change in height of the various liquids/solids interfaces with respect to time can be measured with the help of stop watch. Experimentation of Sedimentation Studies Apparatus To determine Effect of initial concentration and initial suspension height on sedimentation rates. Effect of particle size distribution. Use of flocculating additives. Features: Reasonably priced Damage-resistant Efficient performance

Send Inquiry
Request To Call Back
Product Image (MTK-15423)

FLOCCULATION TEST RIG APPARATUS

Price: 100 INR/Piece

Product Description We have emerged as a well-known firm that is involved in offering an extensive range of Flocculation Jar Test Apparatus. Besides, we provide our valued patrons with the entire series at market leading prices. Features: Longer service life Advanced technology used Low maintenance Excellent in performance Compact design Longer working life Description: Uniform Stirring of up to 6 samples simultaneously. Variable Speed “ 20 “ 100 RPM Heavy Duty Motor Stainless Steel paddles with adjustable heights. Spacing of 6 between rod permit uses up to 1000 ml Beaker. Power- 220/230 V AC, Single Phase 50 Hz

Send Inquiry
Request To Call Back
Product Image (MTK-15412)

DEEP BED FILTER COLUMN APPARATUS

Price: 100 INR/Piece

The present set-up is designed to study the characteristics of a filter column. It consists of a column filled with packing to ensure the good water distribution. 20 Slotted pressure tapings are mounted on the column for measuring the pressure drop across the bed per unit length. These tapings are connected to a differential manometer. These tapings can also be used for drawing the samples from the column and change in concentration of the suspension can be determined. The unit is complete with 2 Nos. of feed tanks. A centrifugal pump is provided to circulate the water through the column. Water supplied to the column is regulated and controlled by rotameter. Product Specification Water Circulation: FHP Pump Column Material: Stainless Steel/Perspex Column ID: 100 mm (approx.) Column Length: 1350 mm (approx.) Feed Tank Capacity: 200 Ltrs. (approx.) Flow Measurement: Rotameter for Water, 0.5 to 5 L/min. Pressure Tapings: 20 Nos. Sampling Ports: 20 Nos.

Send Inquiry
Request To Call Back
Product Image (MTK-9589CT)

R.T.D. STUDIES IN PLUG FLOW TUBULAR REACTOR (COILED TUBE TYPE) APPARATUS

Price: 1000 INR/Piece

Description: Real reactors do not satisfy the idealized flow patterns, back mix flow or plug flow deviation from ideality can be due to channeling of fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel. To predict the exact behavior of a vessel as a Chemicals reactor, RTD or stimulus response technique is used. The setup consists of one feed tank through which water is fed to the reactor. The flow rate can be adjusted by operating the needle valve and measured by Rotameter. The compressed air is used for circulation of feed. It is a helical coil tube type plug flow reactor made up of Stainless steel pipe. Reactants enter at lower end coming out of the top of coil from where samples are collected for analysis. For understanding the R.T.D. characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe is provided. Pressure Regulator & Pressure Gauge are fitted in the compressed air line. Experimentation: To plot RTD curve for Plug Flow Reactor. To determine the Dispersion No. Product Specifications Material: Metal Voltage: 240 Volt (v) Usage: Laboratory Equipment Power: 500 Watt (w) Equipment Materials: SS

Send Inquiry
Request To Call Back
Product Image (MTK-9541PFS)

PLUG FLOW TUBULAR REACTOR (STRAIGHT TUBE TYPE) APPARATUS

Price: 1000 INR/Piece

In an ideal Plug Flow Reactor (PFTR) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. This set-up is used to study a non-catalytic homogeneous reaction under ambient condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. Samples are collected for analysis from the outlet of reactor. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line. Experimentation: Saponification Reaction Study in straight tube Plug Flow Reactor. To determine Reaction Rate Constant. Specifications: Feed Tank (2Nos.): Material Stainless Steel, Capacity: 20 Ltrs. Feed Circulation: By compressed air. Flow Measurement: Rotameter 2 Nos. (One each for Reactants). Piping: Stainless Steel and PVC Pressure Gauge: Bourdon type 0-2 Kg/cm2. Stop Watch: Electronic. The whole unit is assembled rigidly on a base plate and mounted on a stand. Most of the parts are powder coated and rest are painted with auto paints. Services Required: Compressed Air Supply at 2 Bar, 0.5 CFM. Water Supply. Drain. Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

Send Inquiry
Request To Call Back
Product Image (MTK-9588ST)

R.T.D. STUDIES IN PLUG FLOW TUBULAR REACTOR (STRAIGHT TUBE TYPE) APPARATUS

Price: 1000 INR/Piece

Real reactors do not satisfy the idealized flow patterns, back mix flow or plug flow deviation from ideality can be due to channeling of fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel. To predict the exact behavior of a vessel as a Chemicals reactor, RTD or stimulus response technique is used. The set up consists of one overhead feed tank through which water is fed to the reactor. Rotameter is provided to measure flow of water. The flow rate can be adjusted by operating the needle valve provided on rotameter. A straight tube type reactor kept horizontally and inclined upward at outlet from where samples are collected for analysis. For understanding the R.T.D. characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe is provided. EXPERIMENATION: To plot RTD curve for Plug Flow Reactor. To determine the Dispersion No. Product Specifications Material: Metal Usage: Laboratory Machine Operate Method: Manual Equipment Materials: SS

Send Inquiry
Request To Call Back
Product Image (MTK-9540PF)

PLUG FLOW TUBULAR REACTOR (COILED TUBE TYPE) APPARATUS

Price: 100 INR/Piece

In an ideal Plug Flow Reactor (PFTR) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. This set-up is used to study a non-catalytic homogeneous reaction under ambient condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. It is a helical coil tube type reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. Samples are collected for analysis from the outlet of reactor. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed airline. Product Specification Reactor: Material Stainless Steel, Volume (0.6-0.7) Ltrs (approx.). Feed Tank: Material Stainless Steel, Capacity - 20 Ltrs. (approx.) Feed Circulation: By compressed air. Flow Measurement: Rotameter 2 Nos. (One each for Reactants). Piping: Stainless Steel and PU pipe Pressure Regulator: 0-2 Kg/cm2.

Send Inquiry
Request To Call Back
Product Image (MTK-9820ABR)

ADIABATIC BATCH REACTOR APPARATUS

Price: 100 INR/Piece

An adiabatic batch reactor is a closed system with no input and output streams. This reactor is operated under conditions like adiabatic (Temperature of Reaction Mass keep on changing), perfectly mixed (composition of the reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). This setup is used to study a catalytic homogeneous reaction under adiabatic conditions. The set-up consists of a Dewar flask of a capacity of 1 lit. Fitted with a stirrer. The flask is double insulated by ceramic wool insulation. Temp., is measured by a digital temp indicator. The whole setup is mounted on a rigid M.S. frame. Experimentation/Learning Objectives To study the decomposition of Hydrogen Peroxide with water in presence of an Iodide catalyst. To predict the degree of conversion from time-temperature data Utilities Required Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts. Floor Area Required: 1.0 m x 1.0 m. Instruments, Laboratory Glassware, and Chemicals required for analysis as per the system adopted. Product Specification Material: Stainless Steel Capacity: 1 litre Country of Origin: Made in India Temp. Indicator: Digital Floor Area Required: 1.0 m x 1.0 m

Send Inquiry
Request To Call Back
Product Image (MTK-9868UV)

UV-PHOTO REACTOR APPARATUS

Price: 1000 INR/Piece

The set-up is used to study a photo catalytic reaction using a UV source provided in the form of an UV tube. This set-up can be used to carry out a parameter study under batch/continuous flow condition. A photo catalyst like TiO2 can be used. This set-up can also be used to study the mineralization of liquid effluent industrial streams & for purification of water. The set-up consists of reactor with inside reflecting surface. An UV source surrounding glass/quartz cylinder is placed centrally in the reactor Utilities Required Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts. Water Supply Floor Drain. Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted Technical Details UV Source: 30 W / 16 W Reactor: With inside reflective surface. Effective volume of reactor 1-1.5 Ltrs. Feed Tank: Material Stainless Steel, Capacity 5 Ltrs. Feed circulation: Magnetic Pump made of Polypropylene. Maximum working temperature 80C. Flow Measurement: By Rotameter

Send Inquiry
Request To Call Back
Product Image (MTK-9819RCB)

RECYCLE BED REACTOR APPARATUS

Price: 100 INR/Piece

Description The setup consists of catalyst packed column of Stainless Steel. Reactant from a fed tank is fed to the reactor through liquid distributor, fitted at one end of the column. Some part of product is recycled to the reactor using a low capacity sophisticated pump or by overhead tank system. Rotameters are provided to measure the flow of feed & recycled product. The feed rate and recycle product ratio can be manipulated by the respective needle valves of the rotameter. Samples can be taken periodically from the top outlet of reactor at another end. An arrangement is made to carry out the reaction at Isothermal conditions by circulating the hot water in the outer jacket of the packed bed reactor. Arrangement is done for proper mixing of feed & recycle product before its entry to the reactor. A magnetic drive pump made up of poly propylene is used for circulation of feed. Experimentation/Learning Objectives To determine the Reaction Rate Constant. Utilities Required Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts. Water Supply. Floor Drain. Floor Area Required: 1.0 m x 0.75 m. Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted Technical Details Reactor Column: Material Stainless Steel Diameter 25mm (approx.), Length: 500mm (approx.). Packing: Catalyst Feed Tank (1Nos.): Material Stainless Steel, Capacity - 20 Ltrs. Flow Measurement: Rotameter 2Nos. (One each for feed & recycled product). Piping: Stainless Steel and PVC. Feed Circulation: Magnetic Pump of Poly propylene. Hot water tank: Made of Stainless steel, Double wall, insulated with Ceramic Wool, Capacity: 10-15 ltrs. Hot water Circulation: Magnetic Pump of Poly propylene to (in outer Jacket) circulate Hot Water maximum working temp. 85C

Send Inquiry
Request To Call Back
Product Image (MTK-9871CP)

CONDENSATION POLYMERIZATION SET-UP APPARATUS

Price: 1000 INR/Piece

Condensation Polymerization kettle is used to carry out a condensation polymerization reaction under batch conditions. The polymerization reaction can be acid-catalyzed or self-catalyzed. The set-up can be used to measure the extent of reaction & also the reaction rate constant. The set-up consists of a jacketed type SS reactor fitted with variable speed agitator & baffles. The reactor is fitted with Nichrome wire heaters and the temperature is controlled by the digital temperature controller. Metered quantity of nitrogen gas from a cylinder, allowed entering in the reactor. Set-up is complete & self-contained with sampling ports. The top cover can be removed for cleaning purposes. Feed is fed from the top through a funnel provided with S.S. Ball Valve. An outlet is given to the Condenser fitted with a Perkin™s triangle for collecting the condensate. Vapors are allowed to enter the shell of a condenser and cooling water is allowed to pass through the tube and condensate is collected. Experimentation/Learning: Objectives to study the kinetics of Condensation Polymerization in a Batch Reactor under isothermal conditions. To calculate the rate constant and extent of reaction with and without acid catalyst. Utilities Required Electricity Supply: Single Phase, 220 VAC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts. Water Supply Floor Drain. Floor Area: 1.5 m x 1.0 m Instruments, Laboratory wares, and Chemicals required for analysis as per the system adopted. High purity N2 Gas Cylinder with pressure regulator, end connection 1/4³ BSP female.

Send Inquiry
Request To Call Back
Product Image (MTK-9877EP)

EMULSION POLYMERIZATION SET-UP APPARATUS

Price: 1000 INR/Piece

The set-up is used to carry out the emulsion polymerization involving the polymerization of an unsaturated monomer like Styrene. The emulsion is of the type: oil in water, the monomer is oil soluble & the initiator is water-soluble & an emulsifier is used to create a stable emulsion. Apparatus can be used to generate the kinetic data for emulsion polymerization under various operating conditions like temperature, emulsifier concentration, etc. Polymerization is carried out under the atmosphere of air-free nitrogen. The set-up consists of a jacketed type SS reactor fitted with a variable speed agitator & baffles. Hot water from a digitally controlled water bath is circulated in the jacket using a pump. Metered quantity of nitrogen gas from a cylinder passes through a de-oxygenation column & allowed to enter the reactor. Air has to be evacuated using a vacuum pump to create a vacuum of up to 30mm of Hg before passing the nitrogen supply. Initiator from the reservoir is supplied to the reactor under pressure. Set-up is complete & self-contained with sampling ports Experimentation/Learning Objectives: The parameter studies are conducted involving studies of Effect of RPM on conversion. Effect of Initiator concentration. Effect of monomer concentration Effect of emulsifier concentration. Utilities Required The parameter studies are conducted involving studies of Effect of RPM on conversion. Effect of Initiator concentration. Effect of monomer concentration Effect of emulsifier concentration.

Send Inquiry
Request To Call Back
Product Image (MTK-9547CIS)

ISOTHERMAL CONTINUOUS STIRRED TANK REACTOR (C.S.T.R.) APPARATUS

Price: 1000 INR/Piece

Description: In an ideal CSTR (i.e. an ideal steady state flow reactor) the contents in reactor are well mixed and have uniform composition throughout. Thus the exit stream has the same composition as the fluid within the reactor. This type of reactor is known as mixed flow reactor. This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under isothermal condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. The flow rate can be varied by changing the speed of peristaltic pump. The CSTR is fitted with stirrer for proper mixing. From top outlet of it samples are collected for analysis. Constant temperature water bath arrangement is provided to conduct the experiment at various temperatures. Experimentation: Saponification Reaction study in Isothermal CSTR. To determine the Reaction Rate Constant and effect of temperature on it. Product Details: Voltage: 220 Volt (v) Usage: Laboratory Material: Metal Equipment Materials: SS Temperature Range: 30 Celsius (DEGREE C) Display Type: Digital

Send Inquiry
Request To Call Back
Product Image (MTK-9584RTD)

R.T.D. STUDIES IN CONTINUOUS STIRRED TANK REACTOR APPARATUS

Price: 1000 INR/Piece

Description: Real reactors do not satisfy the idealized flow patterns, back mix flow or plug flow deviation from ideality can be due to channeling of fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel. To predict the exact behavior of a vessel as a Chemicals reactor, RTD or stimulus response technique is used. The setup consists of one feed tank through which water is fed to the reactor. The flow rate can be varied by changing the speed of peristaltic pump. The continuously stirred tank reactor made of Stainless Steel is provided for understanding the R.T.D. characteristics. Experimentation: To plot RTD curve for a CSTR. Using pulse tracer. To determine the Dispersion No. Product Specifications Material: Metal Power: 500 Watt (w) Voltage: 220 Volt (v) Usage For: College and University Equipment Materials: SS

Send Inquiry
Request To Call Back
Product Image (MTK-9832KD)

KINETIC OF DISSOLUTION OF BENZOIC ACID APPARATUS

Price: 100 INR/Piece

Description Present set-up consists of a reactor vessel fitted with variable speed agitator and detachable baffles. This unit is designed to study chemical kinetics. Reactants are fed to the reactor, using pump and flow is regulated and monitored by individual Rotameter. An adjustable overflow device is provided in the reactor to conduct the experiment on different reactor volume. A Stainless Steel Coil is immersed in the reactor through which the hot water supply is circulated. Temperature of the hot water is controlled by means of Temperature Controller and it enables the students to enhance the experimentation capabilities Experimentation/Learning Objectives To study the chemical kinetics. To study the effect of residence time. To study the effect of mixing speed. To study the effect of temperature on chemical reaction. Utilities Required Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts. Water Supply Floor Drain. Floor Area Required: 1.5 m x 1 m. Instruments, Laboratory wares and Chemicals required for analysis as per the system adopter Technical Details Reactor: Material SS, Capacity (1-2) Ltrs. Agitator: Variable speed with speed control facility from 0 “ 150 RPM. Impeller: 4 square bladed (1 No.), Material- Stainless Steel. Baffles: Detachable. Piping: PVC. Feed Tank (2Nos.): Material Stainless Steel, Capacity 20 Ltrs. Each Discharge Tank (1No.): Material PVC, Capacity 40 Ltrs. Water Bath: Material Stainless Steel, Double wall, insulated with Ceramic Wool. Heater: Nichrome wire Heater Pumps (3Nos.): 2 Nos. (For Chemical), 1 No. (For hot water circulation).

Send Inquiry
Request To Call Back
Product Image (MTK-9849CF)

COMBINED FLOW REACTOR APPARATUS

Price: 1000 INR/Piece

This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under ambient condition in a combined reactor. It consists of two reactors connected in series; one is plug flow reactor and another is CSTR. In an ideal Plug Flow Reactor (PFTR) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. In case of a coil turbulence is introduced due to frequent change in direction of flow and presence of secondary flow, so a higher value of reaction rate constant is expected in coil tube type plug flow reactor. In an ideal CSTR the contents in reactor are well mixed and have uniform composition throughout. Thus the exit stream has the same composition as the fluid within the reactor. The set up consists of two feed tanks through which two reactants are fed to the reactors fitted in series. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective rotameter. The compressed air is used for circulation of feed. 1st is a helical coil tube type reactor made up of SS pipe. Reactants enter at lower end coming out of the top of coil from where it is fed to CSTR fitted with stirrer for proper mixing. Samples are collected for analysis. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line. Product Specification Reactor 1: Helical Coil Tube Type, Capacity 1 Liter approx. made of stainless steel 304 grade. Reactor 2: CSTR made of stainless steel 304 grade, Material Stainless Steel 304 grade, Capacity 1 Liter (approx.) Stirrer for CSTR: Stainless Steel Impeller and shaft coupled with FHP motor Feed Tank: Material Stainless Steel, Capacity 20 Ltrs. Feed circulation: By compressed air Flow Measurement: Rotameter 2 Nos. (One each for Reactants).

Send Inquiry
Request To Call Back
Product Image (MTK-9823CRS)

CHEMICAL REACTOR SERVICE UNIT APPARATUS

Price: 1000 INR/Piece

This set-up is designed to conduct experiments on different types of chemical reactors on the same service unit. Different types of reactors i.e. continuously Stirred Tank Reactor (CSTR), Plug Flow Tubular Reactor (Coiled Tube Type) and Batch Reactor (which will be supplied on extra cost) as separate units can be installed on the service unit individually one at a time for conducting experiments. Basically this range of small-scale chemical reactors represents the most common types of chemical reactor found in industry. The reactors use the saponification reaction between ethyl acetate and sodium hydroxide. This provides a well-understood and safe reaction for the students to investigate the different reactor types. Each reactor, mounted on a base plate can be attached to the service unit. The appropriate services such as feed circulation, instrumentation for and temperature measurement are connected to the reactor, and it then becomes operational. This service unit comprises feed tanks, rotameters for flow measurement of reactant etc. Compressed air is used for feed circulation. These all things are mounted on a compact and well-designed base for bench mounting. This is self-contained bench top service unit to accommodate the reactors, one at a time, for conducting experiments on the same unit. Utilities Required Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts. Compressed Air Supply: 2 CFM@1 bar Water Supply. Floor Drain. Floor Area: 2.0 m x 1.0 m Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted. Technical Details Feed Tanks: 2Nos. (One each for each reactant) Material: Stainless Steel Capacity: 5 Ltrs. Each. Feed Circulation: By compressed air Temperature Controller: PID Controller, 0-199.9C Heater: Nichrome wire Heater. Hot water Circulator: With water tank and pump to circulate water. Temperature Sensor: RTD PT-100 Type. Piping: Stainless steel & PU pipe. Control panel comprises of: With Standard make on/off switch, Mains Indicator etc. An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus. The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint

Send Inquiry
Request To Call Back
Product Image (MTK-9857BI)

ISOTHERMAL BATCH REACTOR APPARATUS

Price: 500 INR/Piece

A batch reactor is a closed system with no input and output streams. A batch reactor can operate under conditions like Isothermal (Temperature of Reaction Mass remains constant), perfectly mixed (composition of reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of a Reactor fitted in a constant temperature water bath. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 90C with the help of Digital Temperature indicator Cum Controller. Samples can be taken out with the help of a sampling pipette. Experimentation: To study the progress of a Chemicals reaction and determine the kinetic parameters. To determine the effect of temperature on Reaction Rate Constant. Product Details: Power: 500 Watt (w) Voltage: 9 240 Volt (v) Material: Metal Usage: Laboratory Equipment Materials: SS

Send Inquiry
Request To Call Back
Product Image (MTK-9854BD)

PACKED BED REACTOR APPARATUS

Price: 500 INR/Piece

The setup consists of a glass column packed with Rasching Rings and two feed tanks. Reactants are fed to the reactor through liquid distributor, fitted at the bottom of the column. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. Samples can be taken periodically from the top outlet of reactor. Pressure Regulator &Pressure Gauge are fitted in the compressed air line. Product Specification Reactor Column: Material Borosilicate Glass Volume 1.2 Ltrs. (Approx.) Packing: Rasching Rings, Material Borosilicate Glass. Size 6-8 mm (approx.) Feed Tank: Material Stainless Steel, Capacity 20 Ltrs. Feed Circulation: By compressed air Flow Measurement: Rotameter 2Nos. (One each for Reactants). Piping: Stainless Steel and PU Pipe

Send Inquiry
Request To Call Back
Product Image (MTK-9814BR)

R.T.D. STUDIES IN PACKED BED REACTOR APPARATUS

Price: 1000 INR/Piece

Axial diffusion and dispersion of fluid in packed beds are important for design and operation of separation equipment and Chemicals reactors. The tracer technique, the most widely used method for the study of axial dispersion. In stimulus response experimentation, we perturb the system using pulse input of tracer and then see how the system reacts or responds to this stimulus. The analysis of the response gives the desired information about the system. The setup consists of a glass column packed with Rasching Rings and one feed tank. Water is fed to the reactor through liquid distributor, fitted at the bottom of the column. Rotameter is provided to measure the flow of water. The flow rate can be adjusted by operating the needle valve provided on Rotameter. For understanding the R.T.D. characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe, is provided. Samples can be taken periodically from the top outlet of reactor. Pressure Regulator & Pressure Gauge are fitted in the compressed air line. Experimentation/Learning Objectives To plot RTD curve for Packed Bed Reactor. To determine the Dispersion No. Utilities Required Compressed Air Supply: 0.25 CFM@1 bar Water Supply. Floor Drain. Floor Area Required: 1.0 m x 1.0 m. Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted. Technical Details Reactor Column: Material Borosilicate Glass Packing: Rasching Rings, Material Borosilicate Glass. Size 8-10mm (approx.) Feed Tank: Material Stainless Steel, Capacity 20 Ltrs. Feed Circulation: By compressed air. Flow Measurement: Rotameter. Piping: Stainless Steel and PU pipe. Pressure Regulator: 0-2 Kg/cm2 Pressure Gauge: Bourdon type 0-2 Kg/cm2 Stop Watch: Electronic Arrangement is done to inject tracer into the lower end of reactor

Send Inquiry
Request To Call Back
Product Image (MTK-9829LPC)

LIQUID PHASE CHEMICAL REACTOR APPARATUS

Price: 1000 INR/Piece

Description Present set-up consists of a reactor vessel fitted with variable speed agitator and detachable baffles. This unit is designed to study chemical kinetics. Reactants are fed to the reactor, using pump and flow is regulated and monitored by individual Rotameter. An adjustable overflow device is provided in the reactor to conduct the experiment on different reactor volume. A Stainless Steel Coil is immersed in the reactor through which the hot water supply is circulated. Temperature of the hot water is controlled by means of Temperature Controller and it enables the students to enhance the experimentation capabilities Experimentation/Learning Objectives To study the chemical kinetics. To study the effect of residence time. To study the effect of mixing speed. To study the effect of temperature on chemical reaction. Utilities Required Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts. Water Supply Floor Drain. Floor Area Required: 1.5 m x 1 m. Instruments, Laboratory wares and Chemicals required for analysis as per the system adopter Technical Details Reactor: Material SS, Capacity (1-2) Ltrs. Agitator: Variable speed with speed control facility from 0 “ 150 RPM. Impeller: 4 square bladed (1 No.), Material- Stainless Steel. Baffles: Detachable. Piping: PVC. Feed Tank (2Nos.): Material Stainless Steel, Capacity 20 Ltrs. Each Discharge Tank (1No.): Material PVC, Capacity 40 Ltrs. Water Bath: Material Stainless Steel, Double wall, insulated with Ceramic Wool. Heater: Nichrome wire Heater Pumps (3Nos.): 2 Nos. (For Chemical), 1 No. (For hot water circulation).

Send Inquiry
Request To Call Back
Product Image (MTK-9830HYD)

HYDRODYNAMICS OF TRICKLE BED REACTOR APPARATUS

Price: 1000 INR/Piece

Description The set-up consists of a glass column. Arrangement is made for changing the glass column conveniently and filling it with any type of packing required. Air from a regulated pressure vessel passes through a sparger and allowed to enter in the column at the top. Liquid is feed from a tank, fitted with a pump and is distributed at the top of a column using a spray nozzle. Set-up is fully accompanied with manometers required. Solenoid valves are provided in the feed line at the top of column for instant release and close. The flow rate can be adjusted by operating the valves provided in respective line. Experimentation/Learning Objectives To determine Hydrodynamics of a Trickle Bed Reactor involving the measurement of pressure drop, hold-up & flow regime. Utilities Required Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts. Compressed Air supply@2 Bar. Water Supply Floor Area Required: 1.5 m x 0.75 m. Floor Drain. Technical Details Packed Bed: Material Borosilicate Glass Dia. 80mm, Height 600mm Packings: Glass Beads Dia. 3mm/Rasching Rings, size 8-10mm Flow measurement: By Rotameter-2Nos. (One each for water and air). Liquid Feed Tank: Material Stainless Steel, Capacity 60 Ltrs. (Approx.) Feed Circulation: Centrifugal Pump, FHP Crompton/Standard make. Air Tank: Compatible Capacity. Pressure Regulator (2 Nos.): Operating range 0-2 kg/cm2 and 0-10 kg/cm2 Pressure Gauge: Bourdon Type. Mixing Chamber: Material Stainless Steel, Compatible Capacity (For Air & Water). Liquid Catch Pot: Material Stainless Steel, Compatible Capacity. Solenoid Valve: 2Nos. (One each at Liquid and air inlet). Manometers: Compatible capacity. Piping: Material Stainless Steel and PVC/PU pipe Control Valves: Material Gun Metal/Brass

Send Inquiry
Request To Call Back
Product Image (MTK-9809SP)

SPIN INNING BASKET REACTOR APPARATUS

Price: 100 INR/Piece

Description Any catalytic liquid-liquid or liquid-gas reaction involving the use of a catalyst placed in basket can be studies in this set-up. Kinetic parameter of a specific reaction can be estimated & parametric studies can be conducted. The set-up consists of a reactor centrally having one spinning basket derived through a variable speed motor. The metered flow of reactant from feed tank is fed to the reactor at the bottom. The set-up can be used as batch wise of as continuous type. Sampling points are provided for analysis. Port connection for gas inlet is provided at the bottom of the reactor Experimentation/Learning Objectives To determine the kinetic parameters for a given reaction Utilities Required Electricity Supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp combined socket with earth connection. Earth voltage should be less than 5 volts. Compressed air supply@1 Bar. Water Supply. Floor Drain. Floor Area Required: 1.0 m x 0.75 m. Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted Technical Details Reactor Vessel: Material Stainless Steel Effective Volume: 1000 ml. Basket: Material Stainless Steel, Fitted with appropriate Stainless Steel. Drive for Basket: DC Motor with Thyristor controlled DC Drive for Variable Speed. Packing: Catalyst Feed Tank (1Nos.): Material Stainless Steel, Capacity 10 Ltrs. Flow Measurement: By Rotameter Pressure regulator: Range 0-2 kg/cm² Pressure Gauge: Bourdon Type, 0-2 kg/cm² Receiver: Material Stainless Steel, Capacity 10 Ltrs. Piping: Stainless Steel and PVC. Hot water Circulation: Magnetic Pump of Poly propylene (in outer Jacket) to circulate Hot Water maximum working temp. 85C Hot water tank: Made of Stainless Steel, Double wall, insulated with Ceramic Wool. Capacity: 10-15 ltrs.

Send Inquiry
Request To Call Back
Product Image (MTK-9598CC)

CASCADE CONTINUOUS STIRRED TANK REACTOR (CASCADE C.S.T.R.) APPARATUS

Price: 100 INR/Piece

Description: In an ideal CSTR (i.e. an ideal steady state flow reactor) the contents in reactor this set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under ambient condition. The setup consists of three CSTR arranged in series and two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. Reactants from feed tanks enter in the first CSTR and are passed to second CSTR and so on. For analysis samples are collected from different ports provided. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line. Experimentation: To study the performance of Cascade of three equal volumes CSTRs in series for the saponification of a reaction. To draw the performance chart for the reactor system and evaluate the reaction rate constant at ambient condition. Product Details: Voltage: 230 Volt (v) Material: Metal Usage: For College Labs Power: 1500 Watt (w) Equipment Materials: SS

Send Inquiry
Request To Call Back
Product Image (MTK-9545CS)

CONTINUOUS STIRRED TANK REACTOR (C.S.T.R.) APPARATUS

Price: 1000 INR/Piece

Provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rota meter. The compressed air is used for circulation of feed. The CSTR is fitted with stirrer for proper mixing. From top outlet of it samples are collected for analysis. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line. Learning Objectives/Experiments: To study the progress of a suitable Chemical Reaction CSTR. To determine the Reaction Rate Constant. Required for Operation: Compressed Air Supply at 1 HP, 2 CFM. Water Supply. Drain. Electricity Supply: 1 Phase, 220 V AC, 0.5 kW. Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted. Control Panel: Standard make on off switch, Mains Indicator etc.

Send Inquiry
Request To Call Back
Product Image (MTK-9858SBI)

ISOTHERMAL SEMI-BATCH REACTOR APPARATUS

Price: 100 INR/Piece

Description: An isothermal semi-batch reactor is a semi-closed system with one input stream. It is operated under conditions like Isothermal (Temperature of Reaction Mass remains constant) and perfectly mixed (composition of reaction mixture is uniform throughout). This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition. The set up consists of a Reactor fitted in a constant temperature water bath. Before starting the reaction the reactor is charged with measured quantity of one reactant. From a feed tank another reactant is fed to the reactor. Using a sampling pipette samples can be taken out for analysis after fixed interval. Peristaltic Pumps are provided to measure the individual flow of Chemicals. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 70C with the help of Digital Temperature indicator Cum Controller. Experimentation: To study a second order specification reaction in a Semi-Batch Reactor. To determine the Reaction Rate Constant. Product Details: Voltage: 220 Volt (v) Power: 500 Watt (w) Material: Metal Usage: For Laboratory Equipment Materials: SS

Send Inquiry
Request To Call Back
Product Image (MT-298QA)

All Quartz Water Distillation Cabinet

Price: 100 INR/Piece

It has been designed keeping in view customer requirements and easy serviceability of the equipment. All Quartz Double Distillation consists of demountable upper and lower boiler The lower boiler has a built in heater enclosed in a quartz boiler with a cup on top. The upper boiler has a built in quartz coil and condensing unit which is mounted on the boiler with the help of ball and socket joint. Double walled condenser ensures separate condensation of vapors coming from the two boilers using a single cooling circuit. The unit in mounted on a specially designed powder coated stand and is also provided with Safety Control Unit. This new dual - safety cut off has been designed for better and accurate control of the distillation unit. It has been incorporated with advanced microprocessor based electronic circuitry. This has the latest electronic technology that has been introduced by our company which gives an easy user machine interaction. The alpha numeric LCD which has been used shows all messages that correspond to the running of the machine. Also there is alarm system which beeps as and when user attention is required.

Send Inquiry
Request To Call Back
Product Image (MT-298Q)

Water Distillation Unit Quartz

Price: 100 INR/Piece

The apparatus consists of a boiler made from high purity quartz with built in heater and bottom discharge joint for easy cleaning of deposits. A spiral condenser is fitted on the boiler with receiving adapter. The unit comes with Safety Control Unit (Optional) to protect the Glass parts in case of water failure or overheating. Sturdy stand as base duly powder coated. Quartz can withstand very high temperature variation, thus it is absolutely thermal shock proof. Conductivity: 1.0 - 1.5 µ S/cm with Borosilicate Condenser Distilled Water Quality: Pyrogen Free Distillate Temperature: 25.45 degree c Advantages Rust proof powder coated sturdy stand as base. Replaceable clamps are provided for better adjustment and alignment of the boiler and condenser.

Send Inquiry
Request To Call Back
Product Image (MT-298QA)

All Quartz Water Distillation Equipment Cabinet

Price: 100 INR/Piece

It has been designed keeping in view customer requirements and easy serviceability of the equipment. All Quartz Double Distillation consists of demountable upper and lower boiler The lower boiler has a built in heater enclosed in a quartz boiler with a cup on top. The upper boiler has a built in quartz coil and condensing unit which is mounted on the boiler with the help of ball and socket joint. Double walled condenser ensures separate condensation of vapors coming from the two boilers using a single cooling circuit. The unit in mounted on a specially designed powder coated stand and is also provided with Safety Control Unit. This new dual - safety cut off has been designed for better and accurate control of the distillation unit. It has been incorporated with advanced microprocessor based electronic circuitry. This has the latest electronic technology that has been introduced by our company which gives an easy user machine interaction. The alpha numeric LCD which has been used shows all messages that correspond to the running of the machine. Also there is alarm system which beeps as and when user attention is required.

Send Inquiry
Request To Call Back
Product Image (MT-298Q)

Water Distillation Unit Quartz Teknik

Price: 100 INR/Piece

The apparatus consists of a boiler made from high purity quartz with built in heater and bottom discharge joint for easy cleaning of deposits. A spiral condenser is fitted on the boiler with receiving adapter. The unit comes with Safety Control Unit (Optional) to protect the Glass parts in case of water failure or overheating. Sturdy stand as base duly powder coated. Quartz can withstand very high temperature variation, thus it is absolutely thermal shock proof. Conductivity: 1.0 - 1.5 µ S/cm with Borosilicate Condenser Distilled Water Quality: Pyrogen Free Distillate Temperature: 25.45 degree c Advantages Rust proof powder coated sturdy stand as base. Replaceable clamps are provided for better adjustment and alignment of the boiler and condenser.

Send Inquiry
Request To Call Back
Product Image (MT-298Q)

Quartz Water Distillation Equipment Cabinet

Price: 100 INR/Piece

The apparatus consists of a boiler made from high purity quartz with built in heater and bottom discharge joint for easy cleaning of deposits. A spiral condenser is fitted on the boiler with receiving adapter. The unit comes with Safety Control Unit (Optional) to protect the Glass parts in case of water failure or overheating. Sturdy stand as base duly powder coated. Quartz can withstand very high temperature variation, thus it is absolutely thermal shock proof. Conductivity: 1.0 - 1.5 µ S/cm with Borosilicate Condenser Distilled Water Quality: Pyrogen Free Distillate Temperature: 25.45 degree c Advantages Rust proof powder coated sturdy stand as base. Replaceable clamps are provided for better adjustment and alignment of the boiler and condenser.

Send Inquiry
Request To Call Back
Product Image (MT-298)

Teknik Distilled Water Lab Equipment

Price: 100 INR/Piece

Panel Mounted Borosilicate Glass Boiler with inbuilt heater and Borosilicate Glass Condenser. Complete with stand, Clamps etc. Conductivity of Distilled water produced is less than 1u5 cm1. PH 6-7 suitable for HPLC. Output approx. 2.0 Lt/Hr. Capacity: 2 ltr 4 ltr

Send Inquiry
Request To Call Back
Product Image (MT-298Q)

Quartz Water Distillation Apparatus

Price: 100 INR/Piece

The apparatus consists of a boiler made from high purity quartz with built in heater and bottom discharge joint for easy cleaning of deposits. A spiral condenser is fitted on the boiler with receiving adapter. The unit comes with Safety Control Unit (Optional) to protect the Glass parts in case of water failure or overheating. Sturdy stand as base duly powder coated. Quartz can withstand very high temperature variation, thus it is absolutely thermal shock proof. Conductivity: 1.0 - 1.5 µ S/cm with Borosilicate Condenser Distilled Water Quality: Pyrogen Free Distillate Temperature: 25.45 deg c Advantages Rust proof powder coated sturdy stand as base. Replaceable clamps are provided for better adjustment and alignment of the boiler and condenser.

Send Inquiry
Request To Call Back
Product Image (MT-298Q)

Single Stage Quartz Water Distillation

Price: 100 INR/Piece

The apparatus consists of a boiler made from high purity quartz with built in heater and bottom discharge joint for easy cleaning of deposits. A spiral condenser is fitted on the boiler with receiving adapter. The unit comes with Safety Control Unit (Optional) to protect the Glass parts in case of water failure or overheating. Sturdy stand as base duly powder coated. Quartz can withstand very high temperature variation, thus it is absolutely thermal shock proof. Conductivity: 1.0 - 1.5 µ S/cm with Borosilicate Condenser Distilled Water Quality: Pyrogen Free Distillate Temperature: 25.45 deg c Advantages Rust proof powder coated sturdy stand as base. Replaceable clamps are provided for better adjustment and alignment of the boiler and condenser.

Send Inquiry
Request To Call Back
Product Image (MT-298Q)

Quartz Water Distillation Equipment

Price: 100 INR/Piece

The apparatus consists of a boiler made from high purity quartz with built in heater and bottom discharge joint for easy cleaning of deposits. A spiral condenser is fitted on the boiler with receiving adapter. The unit comes with Safety Control Unit (Optional) to protect the Glass parts in case of water failure or overheating. Sturdy stand as base duly powder coated. Quartz can withstand very high temperature variation, thus it is absolutely thermal shock proof. Conductivity: 1.0 - 1.5 µ S/cm with Borosilicate Condenser Distilled Water Quality: Pyrogen Free Distillate Temperature: 25.45 deg c Advantages Rust proof powder coated sturdy stand as base. Replaceable clamps are provided for better adjustment and alignment of the boiler and condenser.

Send Inquiry
Request To Call Back
Product Image (MT-298QAM)

Distilled Water Equipment Cabinet

Price: 100 INR/Piece

This is a Fully Automatic Water Distillation Equipment and can be used in research laboratories, hospitals etc. It is manufactured from 3.3 exp Borosilicate Glass or Quartz Glass. The distillation has following features: Replaceable Silica Sheathed (Quartz) Heater: The Horizontal Jacket is fitted with removable Silica Heater and Screw Threaded Connectors for ease of cleaning. Distillate temperature is around 25 to 45 degree C which is ensured by an efficient condenser. The stand is powder coated for rust free operation and lustrous appearance. Cooling water from the condenser is re-circulated into the boiling chamber, hence saving energy. Screw Threaded Connectors: These are provided for easy Plumbing & Installation to avoid any glassware breakage during assembly. Fuse is provided for safety in case of voltage fluctuation or short circuit. Boiler is provided with a Replaceable Side over Flow for easy draining and cleaning of boiling chamber. The front cover is removable for checking the glass parts. Electrical Power: 220/240 V, 50/60Hz, Single Phase AC Supply.

Send Inquiry
Request To Call Back
Product Image (MT-298Q)

Teknik Quartz Water Distillation Equipment

Price: 100 INR/Piece

The apparatus consists of a boiler made from high purity quartz with built in heater and bottom discharge joint for easy cleaning of deposits. A spiral condenser is fitted on the boiler with receiving adapter. The unit comes with Safety Control Unit (Optional) to protect the Glass parts in case of water failure or overheating. Sturdy stand as base duly powder coated. Quartz can withstand very high temperature variation, thus it is absolutely thermal shock proof. Conductivity: 1.0 - 1.5 µ S/cm with Borosilicate Condenser Distilled Water Quality: Pyrogen Free Distillate Temperature: 25.45 deg c Advantages Rust proof powder coated sturdy stand as base. Replaceable clamps are provided for better adjustment and alignment of the boiler and condenser.

Send Inquiry
Request To Call Back
Product Image (MT-298)

Water Distillation Equipment

Price: 100 INR/Piece

Panel Mounted Borosilicate Glass Boiler with inbuilt heater and Borosilicate Glass Condenser. Complete with stand, Clamps etc. Conductivity of Distilled water produced is less than 1u5 cm1. PH 6-7 suitable for HPLC. Output approx. 2.0 Lt/Hr. Capacity: 2 ltr 4 ltr

Send Inquiry
Request To Call Back
Product Image (MT-298QB)

Quartz Subboiling High Pure Water Distiller

Price: 100 INR/Piece

Mode: Automatic Type: Double Unit Distiller Features: Internal Quartz and external stainless steel material. Water shortage protection, automatic power off. High temperature resistance and corrosion resistance. Thermal radiation heating

Send Inquiry
Request To Call Back
Product Image (MT-298QAM)

Automatic Water Distillation Equipment

Price: 100 INR/Piece

This is a Fully Automatic Water Distillation Equipment and can be used in research laboratories, hospitals etc. It is manufactured from 3.3 exp Borosilicate Glass or Quartz Glass. The distillation has following features: Replaceable Silica Sheathed (Quartz) Heater: The Horizontal Jacket is fitted with removable Silica Heater and Screw Threaded Connectors for ease of cleaning. Distillate temperature is around 25 to 45C which is ensured by an efficient condenser. The stand is powder coated for rust free operation and lustrous appearance. Cooling water from the condenser is re-circulated into the boiling chamber, hence saving energy. Screw Threaded Connectors: These are provided for easy Plumbing & Installation to avoid any glassware breakage during assembly. Fuse is provided for safety in case of voltage fluctuation or short circuit. Boiler is provided with a Replaceable Side over Flow for easy draining and cleaning of boiling chamber. The front cover is removable for checking the glass parts. Electrical Power: 220/240 V, 50/60Hz, Single Phase AC Supply.

Send Inquiry
Request To Call Back
Product Image (MT-298QAM)

Automatic Water Distillation Equipment Cabinet

Price: 100 INR/Piece

This is a Fully Automatic Water Distillation Equipment and can be used in research laboratories, hospitals etc. It is manufactured from 3.3 exp Borosilicate Glass or Quartz Glass. The distillation has following features: Replaceable Silica Sheathed (Quartz) Heater: The Horizontal Jacket is fitted with removable Silica Heater and Screw Threaded Connectors for ease of cleaning. Distillate temperature is around 25 to 45 degree C which is ensured by an efficient condenser. The stand is powder coated for rust free operation and lustrous appearance. Cooling water from the condenser is re-circulated into the boiling chamber, hence saving energy. Screw Threaded Connectors: These are provided for easy Plumbing & Installation to avoid any glassware breakage during assembly. Fuse is provided for safety in case of voltage fluctuation or short circuit. Boiler is provided with a Replaceable Side over Flow for easy draining and cleaning of boiling chamber. The front cover is removable for checking the glass parts. Electrical Power: 220/240 V, 50/60Hz, Single Phase AC Supply.

Send Inquiry
Request To Call Back
Product Image (MT-298QAM)

Water Distillation Equipment Cabinet

Price: 100 INR/Piece

This is a Fully Automatic Water Distillation Equipment and can be used in research laboratories, hospitals etc. It is manufactured from 3.3 exp Borosilicate Glass or Quartz Glass. The distillation has following features: Replaceable Silica Sheathed (Quartz) Heater: The Horizontal Jacket is fitted with removable Silica Heater and Screw Threaded Connectors for ease of cleaning. Distillate temperature is around 25 to 45 degree C which is ensured by an efficient condenser. The stand is powder coated for rust free operation and lustrous appearance. Cooling water from the condenser is re-circulated into the boiling chamber, hence saving energy. Screw Threaded Connectors: These are provided for easy Plumbing & Installation to avoid any glassware breakage during assembly. Fuse is provided for safety in case of voltage fluctuation or short circuit. Boiler is provided with a Replaceable Side over Flow for easy draining and cleaning of boiling chamber. The front cover is removable for checking the glass parts. Electrical Power: 220/240 V, 50/60Hz, Single Phase AC Supply.

Send Inquiry
Request To Call Back
Product Image (MTS-11028)

HAND OPERATED CASAGRANDE EQUIPMENT

Price: 10 INR/Piece

HAND OPERATED CASAGRANDE EQUIPMENTUse: Measuring the Liquid limit.Standard: ASTM D4318 "1/AASHTO T 89. Specifications: Hand operated with counter. A brass cup suspended from a carriage designed to control its drop exactly 1 cm onto a hard rubber base. Adjustable height of drop by a nut at the rear of the cup. Casagrande grooving tool. Rubber feet isolate base from work surface.

Send Inquiry
Request To Call Back
Product Image (MTS-921)

Chiller Water Bath

Price: 100 INR/Piece

Chiller Water Bath APPLICATION Most ideal for chilling and condensing applications in external systems such as Rotary Vacuum Evaporators, Viscometers, Electrophoresis Systems, Chilling of heated water baths and general lab applications of chilling in closed loop systems. ADVANTAGES & BENEFITS Compact circulator chiller, can be placed under or over the workbench. Hermetically sealed compressor with environment friendly CFC FREE refrigerants. Reduces tap water consumption thus reducing high cost of water and waste water. Waste water does not contain hazardous substances thus eliminating danger to personnel and environment caused by solvents. Built-in circulator pump for efficient circulating processes. Offers highest level of performance, flexibility and control for most demanding applications. Low noise level. Wide operating ranges and applications. CONSTRUCTIONAL FEATURES Inner bath chamber & lid made of stainless steel (SS-304 grade). Outer body made of CRC sheet duly powder coated. Space between inner and outer chamber filled with high grade PUF insulation. Mounted on castors for easy portability. CONSTRUCTIONAL FEATURES Various temperature ranges available to choose from depending upon varied requirements and applications. Microprocessor based PID DIGITAL TEMPERATURE INDICATOR CUM CONTROLLER. With timer, alarm & over temperature protection Powerful circulation pump with 15 Lpm capacity at zero head for water. Use ethanol for temperature ranged below +5C. To work on 220/230 volts, 50/60 Hz AC Supply. Working Chamber : 500 x 250 x 250 mm.

Send Inquiry
Request To Call Back
Product Image (MTS-918)

Reverse Osmasis Ultra Filteration Unit

Price: 100 INR/Piece

Reverse Osmasis Ultra Filteration Unit The RO/UF unit is the smallest known industrial membrane system of its type in the world. It is designed specifically for laboratory scale testing of both reverse osmosis and ultra filtration techniques. This is fully self-contained in a mobile cabinet. Comprehensive instrumentation is provided with digital meters displaying temperatures and system pressure. In addition to the membrane module, the cabinet also houses feed and permeate tanks, a plate heat exchanger and positive displacement pumps. Connection to cooling water and a suitable electrical supply is all that is required for normal operation. All parts in contact with the process fluid are constructed from hygienic design materials such as stainless steel, PTFE and silicone rubber. The RO/UF unit has an efficient clean-in-place facility and is easily dismantled for servicing or maintenance. Membranes can be installed or removed rapidly for use in either process. The filtration membranes differ only in length and quantity from those installed in the full-scale plant. Using small quantities of process fluid, operating parameters can be established and then optimised to effect a confident transition to full-scale.

Send Inquiry
Request To Call Back
Product Image (MTS-914)

Anarobic Digester

Price: 100 INR/Piece

Anarobic Digester Description The Anaerobic Digester is comprised of two 1.3 gallon upward flow packed bed reactors, with feed rate and temperature controls to allow steady, continuous operation at up to 1.1 gallons per day. The reactors may be operated in series or parallel. A buffer vessel between the reactors permits discharge of excess flow from the first reactor when the second reactor is operated in series, but at a lower flow rate. The flow rates to the vessels are set and controlled by peristaltic pumps. The temperature of each reactor is controlled by an electric heating tape wrapped around the external wall. The temperature distribution within each reactor is maintained to ±1F. Reactor temperatures may be separately set at any desired value in the range ambient to 131šF. The gas off-take from each reactor is taken to a volumetrically calibrated collector vessel operating by water displacement. A constant head, liquid seal device ensures that the gas pressure in the reactor is maintained at a constant value throughout the test run. The collected gas can be exhausted from the vessel and the volume refilled with water during a run, without breaking the liquid seal. Liquid and gas sampling points are located at all strategic points around the reactors. The equipment is mounted on a steel base with an integral barrier to cope with spillage and wash down. The base is finished in instrument tan texture enamel. The control panel is finished in gloss white enamel and silk screened in KEM black enamel. Specifications Reactors Two identical reactorsšnominal capacity, 1.3 gal.; packed volume, 1.1 gal.; 6.25" ID diameter by 10" high. Reactor packing 1" diameter bio-balls. Temperature control For each reactor 836W heating jacket with PID control from a temperature sensor positioned inside the reactor, set point within range ambient to 131F; the jacket is thermostatically protected by a cutout set at 185F. pH Meter Range: 0.00 - 14.00 Feed pumps Two identical peristaltic pumps variable speed using a potentiometer to 12 rpm, with flow rates from 0.04 to 1.1 gal. per day. Gas collection vessels Two identical linear scale, 0 1.3 gal. capacity

Send Inquiry
Request To Call Back
Product Image (MTS-912)

Aerobic Digester

Price: 100 INR/Piece

Aerobic Digester consists of a 2 gallon reactor vessel mounted on a steel base, with a liquid feed pump, air supply, and instrumentation for monitoring and controlling the process. The cylindrical wall of the reactor is made from 2 layers of porous plastic material to retain the suspended solids, while allowing treated water to pass through to the outer, annular exit chamber. This design allows the essential features of the aerobic treatment process to be studied without the distractions of having to settle the solids adequately enough for external recycle, a well known laboratory problem. The porous liners are removable for cleaning, and a spare liner is supplied. Waste water is drawn from a feed tank by a 120V motor driven peristaltic pump. Flow rate is controlled by a variabe run time control that determines the minutes of run time within a 10 minute cycle. The pump delivers the feed to the reactor vessel through a transparent lid. Air is supplied at a measured rate by a small air pump, and discharges into the base of the reactor via an air distribution device. This provides the necessary oxygen for the digestion process, as well as produces sufficient bubbling for stirring and reaction. The liquid level in the reactor is maintained at a constant value of 1 or 2 gal. by an overflow device connected to the outer annular chamber of the vessel. Discharge is by gravity to a floor-standing product tank (not supplied). The reactor temperature is maintained by a 3-term PID controller which varies power to an immersion heater within the vessel. Any temperature between ambient and 95F may be selected, with the best conditions being a few degrees above the diurnal maximum in the users laboratory. Dissolved oxygen and pH probes and meters are included. The reactor lid contains a gas exit port, suitable for sampling the gases for subsequent analysis Specifications Feed pump 120V, peristaltic, 10 rpm, variable run time control corresponding to 0-13 gal. per day Air pump 240V/120V, 01.35 gpm Reactor vessel 2 gal. maximum capacity pH meter Range 0.00 to 14.00 Dissolved oxygen meter Range 0-100% saturation, resolution 2% Reactor heater Electrical immersion 250W Temperature controller 3-term PID, temperature limit set at 95F

Send Inquiry
Request To Call Back
Product Image (MTS-920)

Flow Through Helical coil

Price: 100 INR/Unit

Our company with a focus on innovation, technological up-gradation, and dynamism, is moving ahead while maintaining timeliness in the delivering of a range of Flow Through Helical Coil. Only professionals design this coil, making use of high-grade raw materials, technology, and not to forget their in-depth knowledge about the industrial standards. This coil is available in a number of specifications to meet several demands of our customers. Features: Rust resistance Minimal maintenance Maximum strength Specifications: Stainless Steel Helical Coil of 12 diameter 15 is the total number of Turns Coil Tube Diameter OD 21mm, ID 17mm (Approx.) Stainless steel or PVC Sump Tank of 50 ltrs Capacity Crompton/Sharp make Water Circulation FHP Pump 2 Manometers Flow measurement Rotameter GI and PVC Piping Control panel consisting Standard make on off switch and mains Indicator Well designed complete set-up arranged in a painted structure

Send Inquiry
Request To Call Back
Product Image (MTS-917)

Rapid Extractor

Price: 100 INR/Piece

Rapid Extractor Laboratory Scale Rapid Extractor is used to extract the active constituents from materials in laboratory scale batch sizes. The Microteknik uses high pressure and extraction phases to achieve a rapid extraction of the active materials with minimum degradation to the product.

Send Inquiry
Request To Call Back
Product Image (MTS-919)

Thermal Conductivity of Metal Rod

Price: 100 INR/Piece

Thermal Conductivity of Metal Rod Determination Of Thermal Conductivity Of Metal Bar (Brass/Copper) Description: The Apparatus Consists Of A Brass Rod, One End Of Which Is Heated By An Electric Heating Coil While The Other End Projects Into The Cooling Water Jacket. The Rod Is Insulated With Glass Wool To Minimize The Radiation And Convection Loss From The Surface Of The Rod And Thus Ensure Nearly Constant Temperature Gradient Throughout The Length Of The Rod. The Temperature Of The Rod Is Measured At Five Different Locations Along The Length. The Heater Is Provided With A Dimmer Stat For Controlling The Heat Input. Water Is Circulated Through The Jacket And Its Flow Rate And Temperature Rise Can Be Measured The Whole System Is A Single Unit, Consists Of A Metallic, Powder Coated Control Panel With M S Square Tube Table, Which Gives Esthetic Finish. The Apparatus Provided With Digital Instrumentation To Get Accurate Readouts And Results. Instruction Manual: Self-explanatory Operating Manual Provided With The System, Which Contains Brief Theory And Practical Exercises And A Set Of Sample Calculation Report. System Components & Specifications: Specimen: 20mm Dia, 450mm Long Brass / Copper Cylindrical Shell: 150mm Dia X 300mm Long M.s.pipe Water Jacket: 100mm Dia X 100 Mm Long M.s.pipe Heater: Band Type, Nichrome 250 Watts Voltmeter: Digital Voltmeter Of Range 0-300v Ac Ammeter: Digital Ammeter Of Range 0-20a Ac Temperature Indicator: Digital Temperature Indicator Of Range 0-400šc With Tss Thermocouples: Ptfe Coated Cr š“al (K-type)-11 No. Variac: Electronic Dimmer 1.5kw. Measuring Jar. Plastic-250ml Stop Watch : digital Utilities Required To Be Arranged By The Customer:: Electric Supply: 230 V, 5 Amps Ac, 50 Hz, Single Phase Electric Supply With Proper Earthing.

Send Inquiry
Request To Call Back
Product Image (MTS-916)

Fluidisation And Fluid Bed Heat Transfer Unit

Price: 100 INR/Piece

FLUIDISATION AND FLUID BED HEAT TRANSFER UNIT DESCRIPTION : This is a dryer in which moisture removal takes place by fluidization of solids particles by hot air. The set-up fitted with a specially designed, vertical Glass Column. The lower portion of the column is filled with fluidizing material. The material is supported on the screen mesh held between two flanges. Air from a compressor is heated in the heater box and passed through the column. Flow control and by-pass valve are fitted to regulate the airflow. At the top outlet of column a cyclone is provided to collect any solid particles taken out by the air stream. EXPERIMENTATION: To study the fluidized bed drying. To plot the drying curve under fluidized bed condition. UTILITIES REQUIRED : Electricity Supply : 1 Phase, 220 V AC, 3 kW. Granular and free flowing solid of size 1 to 2 mm. TECHNICAL DETAILS : Column : Material Borosilicate Glass Dia. 80 mm. Total Length 500mm. Cyclone Separator : Material Stainless Steel, Compatible Capacity with collector. Air Circulation : By forced draft fan, Arrangement is done vary the air flow rate. Heating Chamber : Compatible capacity Heater : Nichrome wire heater Temperature Sensors : RTD PT-100 type. Control panel comprises of : Digital Temp. Controller : 0 199.9C (For Hot Air) Standard make on/off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged in a good quality painted structure.

Send Inquiry
Request To Call Back
Product Image (MTS-908)

Liquid Chromatograph Digital

Price: 100 INR/Unit

Liquid Chromatograph Digital : MTS-908 A single source of authoritative information on all aspects of the practice of modern liquid chromatography suitable for advanced students and professionals working in a laboratory or managerial capacity Chapters written by authoritative and visionary experts in the field provide an overview and focused treatment of a single topic Comprehensive coverage of modern liquid chromatography from theory, to methods, to selected applications Thorough selected references and tables with commonly used data to facilitate research, practical work, comparison of results, and decision making Extensive original tables and figures, placing recent research developments into a general context Worked examples, intuitive explanations, and clear figures reinforce learning Optional: Analoge model are Available.

Send Inquiry
Request To Call Back
Product Image (MTS-906)

Double Water Distiller

Price: 100 INR/Piece

DOUBLE WATER DISTILLER : MTS-906 The Double Water Distiller manufactured by us is highly acclaimed for being sturdy and durable. These equipment are also known for their efficient service life. Manufactured using quality-approved components, these are used for water distillation purposes in chemical engineering laboratories. These are made available to clients within the specified time period at affordable costs. These are easy to install. Being robustly designed, these do not require much maintenance too. We are also involved in the export of these distillers. The distillation provides double distilled water. The high quality borosilicate glassware coupled with silica heater gives pyrogen free distillate of highest purity. The optimization of cooling water volume is controlled by a cooling water flow meter, in addition to this the equipment is fitted with PTS which maintains sufficient water to the boiler. Features: Easy to use. Dual fail safe operation. Simple to clean. No metallic contact. Replaceable Silica sheathed heaters. All threaded connector.

Send Inquiry
Request To Call Back
Product Image (MTS-910)

Rising Film Evaporator

Price: 100 INR/Unit

Rising Film Evaporator : MTS-910 The Microteknik evaporator processes samples in smallest volume under production conditions, sufficient to reveal the effect of heating on any ingredients. Having single tube-in-jacket evaporator.with longer tubes within the steam space. feed tank, vapour/liquid separator, condenser, concentrate tank, condensate tank, CIP pump and vacuum pump, all manufactured from stainless steel, PTFE and glass. A sturdy framework and requires only connection to suitable steam, electrical and water services for operation. Less floor space is required to install the evaporator and can to fit easily into a room of standard height.

Send Inquiry
Request To Call Back
Product Image ( MTS-909)

Gas Absorption Column

Price: 10 INR/Piece

Gas Absorption Column : MTS-909 This apparatus is used to determine the air pressure differential across the column as a function of air flow rate at different water flow rates down the column, and flooding point can be noted. Absorption process of carbon dioxide from air-CO2 mixture into caustic soda solution, is also studied using this system. The system components are mounted within a floor standing painted steel framework. The wetted wall column is a glass column with water inlet and outlet sections and is gimbal mounted to ensure that it can be set accurately vertical. The deoxygenating column is of similar overall size to the wetted wall column, standing vertically adjacent to it. Beside the columns is a control console housing flow meters, pump controls and oxygen analyser. Situated between the columns are two special housings containing the oxygen analysis probes which monitor the oxygen content in the water entering and leaving the absorption column. The apparatus uses water as the working medium, contained in a storage tank at the rear of the unit. Pumps delivering water to the deoxygenator and the absorption column are located at the base of the unit. Dissolved oxygen at inlet and outlet can be measured in rapid succession. The water drains into the storage tank to be recycled to the deoxygenator. In operation, water is sparged with nitrogen in the deoxygenator before entering the top of the wetted wall column. Air is pumped by the integral diaphragm type air pump into the base of the column. The air passes up the column, giving up the oxygen to the water.

Send Inquiry
Request To Call Back
Product Image ( MTS-907)

Sedimentation Studies Apparatus

Price: 100 INR/Unit

Sedimentation Studies Apparatus MTS-907 Our expertise in the field of manufacturing has helped us satisfy the expectations of our clients. The Sedimentation Studies are high quality equipments which are manufactured at our ultramodern infrastructure facility in compliance with the prevailing industrial standards. These are supplied to clients in different specifications at affordable market prices. Known for their sturdy designs and durable exterior, these equipments are highly demanded by chemical engineering laboratories. Features: Reasonably priced Damage-resistant Efficient performance

Send Inquiry
Request To Call Back
Product Image ( MTS-905)

ABSORPTION IN PACKED COLUMN

Price: 100 INR/Unit

ABSORPTION IN PACKED COLUMN : MTS-905 The absorption column is designed to demonstrate the basics of gas absorption in the unit operations of chemical engineering. A glass absorption column is used to allow mass transfer between the absorption liquid and feed gases within the unit. Students are exposed to the working principle s of a gas absorption column via wetted wall system. Some of the other features are as follows: Compares absorption characteristics of packed columns. Allows humidification and stripping to be studied. Complete visual monitoring of the process. Easily operated and used. No further development work necessary. Suitable for project or research work.

Send Inquiry
Request To Call Back
Product Image ( MTS-901)

Batch Enzyme Reactor

Price: 100 INR/Unit

Batch Enzyme Reactor MTS-901

Send Inquiry
Request To Call Back
Product Image (MTS-904)

Laboratory Pasteuriser

Price: 10 INR/Piece

Laboratory Pasteuriser : MTS-904 We are reputed manufacturers and exporters of premium quality Laboratory Pasteuriser. These are manufactured using premium quality raw materials as per the existing industrial standards. These Laboratory pasteuriser are used as a medium for different enzymes to react and produce the desired results. These are widely used in chemical engineering laboratories. These are light-weight equipments which can be easily installed. Since these require minimal maintenance, low maintenance costs are incurred. These are economically priced equipments. Features Easy to install Sturdy design High efficiency

Send Inquiry
Request To Call Back
Product Image ( MTS-902)

Chemical Reactor Training Equipment

Price: 10 INR/Piece

"TEKNIK" Chemical Reactor Training Equipment : MTS-902 Our dynamic workforce helps us carry out an efficient manufacturing process to manufacture Chemical Reactor Training Equipment. These are made using high quality raw materials and components which are sourced from leading vendors of the market. These equipments are highly demanded for use in chemical laboratories for various training purposes. These are quality compliant equipments which are made available to clients at economical market prices within the specified time period. Besides being easy to install and operate, these are affordable as well. Technical Description The properties of different chemical reactors can be investigated by performing a saponification reaction using this trainer. The contact time and reaction temperature can be varied. Their influence on the conversion of reactants is observed in the respective reactor. The reactors are available as accessories. The unit contains two supply tanks for the liquid chemicals. Two variable speed diaphragm pumps pump the reactants through the reactor. Reactant conversion and reaction temperature are measured with a combined conductivity and temperature measuring unit. It is also possible to use PC data acquisition. The reaction is moderated using a controlled hot water circuit. The resulting reaction product is collected in a stainless steel tray in the unit. Features: Efficient performance Easy to install Easy to maintain

Send Inquiry
Request To Call Back
Product Image (MTS-435B)

Field CBR Equipment

Price: 100 INR/Unit

Field CBR Jack 50kN capacity; weight 8.5 kg; total height: 254mm 1 Ball Seating Attachment 1 Proving Ring, 10 kN capacity. 1 Circular 4.54 kg Surcharge Weight. 250 mm dia with 53 mm dia central hole, 1 Slotted (4.54 kg) Surcharge Weight. 215 mm to 250 mm dia with 53 mm dia slot. 1 Slotted (9.07 kg) Surcharge Weight 215 mm to 250 mm dia with 53 dia slot. Dial gauge support of seamless pipe construction, 30 cm high and 45 cm wide at the base, with a quick release screw. type clamp capable of sliding and locking anywhere along 2 meter length of the bridge.

Send Inquiry
Request To Call Back
X


Quick Links
Our Products
View All
Contact Details
    MICRO TEKNIK

    GST : 06ACMPJ7244B1ZS

  • Plot No. 73, Vikaspuri, Industrial Area, Ambala Cantt - 133001, Haryana, India
  • Phone : 07971459233
  • Mr Vikas Jain (CEO)
  • Mobile : 07971459233
  • Send Inquiry Send Inquiry
    Send SMS Send SMS
       
    Call Me Call Me Free
    Back to top
    Tradeindia
    M/S MICRO TECNIK All Rights Reserved.(Terms of Use)
    Developed and Managed by Infocom Network Private Limited.