Low Temperature Water Bath
Product Details:
X
Low Temperature Water Bath Price And Quantity
- 1 Unit
Low Temperature Water Bath Trade Information
- Telegraphic Transfer (T/T) Cash in Advance (CID) Cash Advance (CA)
- 100 Unit Per Week
- 1 Week
- Central America Eastern Europe South America Australia Asia North America Africa
- All India
Product Description
Low Temperature Water Bath: MTBA -19
It may be defined as the fitted with a compaction rammer with a free fall of 457 mm the rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the test sample. When the rammer reaches the required height the pawl release the rammer which falls freely on test specimen. The release mechanism is connected by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm. An automatic blow counter fitted to the compactor is used to set the number of blows. The Compactor is supplied complete with wooden pedestal. Suitable to work on 220V, 50 Hz, AC single phase.
Features
- The release mechanism is connected by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm. An automatic blow counter fitted to the compactor is used to set the number of blows.
- Safety thermostat for over shoot of temp., safety circuit to cut off the whole systems in case of malfunction.
- HRC fuses for compressors, heaters & mains, time delay circuit for safety of compressor.
- Reports, Calibration & Test Certificates traceable to national & International Standards.
- Temp Control: Digital temp controller housing all the controls switches with PT-100 sensor.
- Heaters: S. S. tubular heaters for maintaining of temp.
- Construction : Double walled,
- Cooling device assembly
- PID parameters controlling function
- High accuracy and dependability of temperature controlling
Technical Specification
- It is a motor driven mechanical compactor useful for compaction into 100 mm dia moulds.
- Accuracy : +0.1ºC to 0.5ºC
- It is fitted with a compaction rammer of 98.5mm dia, weighing 4.535 kg. With a free fall of 457 mm.
- The rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the test sample. When the rammer reaches the required height the pawl release the rammer which falls freely on test specimen.
- Temp. Range : Ambient to 0ºC TO 100ºC/ -20ºC TO 100ºC/ -30ºC TO 100ºC/ -40ºC TO 100ºC/ -70ºC TO 100ºC
- The Compactor is supplied complete with wooden pedestal. Suitable to work on 220V, 50 Hz, AC single phase.
Enter Buying Requirement Details