trusted seller
Send Email

Scientific Instruments
Product Image (EM-113M)

Microprocessor Flame Photometer

Price: 10 INR/Piece

Digital flame photometer microprocessor Range Na : 0.1 to 100 K: 0.1 to 100 Ca : 15 to 100 Li : 10 to 100 Sensitivity:- 0.1 ppm. Accuracy:- ±1 % up to 40 ppm. ±2 % above 40 ppm. Readout:- 5 digit seven segment bright red LED.

Send Inquiry
Request To Call Back
Product Image (J-8ED)

Semi Automatic Microtome

Price: 149000 INR/Piece

Semi Automatic Microtome A sturdy Semi Automatic Microtome usable in sectioning slime and sensitive incision from tissues. Semi automatic cut sections from 0.5 p to 50 p. Sample feed of the microtome is automatically and perform the motorization and sectioning process manually. This is microscope controlled with LCD screen on the sections and statu s of error. Having command control module to control the proposed device. Also having an integrated waste collection folder.. A standard sample holder is provided with the proposed device optionally a glass knife holder Accessories supplied with the Microtome: Tissue flotation bath.(5 liter), Digital Temp Controlled. Disposable blades ( 50 ) and blade holders, Block holders, (20), L. moulds.( Brass ) (20) ,interior parts permitting easy access for cleaning & lubrication.

Send Inquiry
Request To Call Back
Product Image (MT-175N)

Ammonium Ion Specific Electrodes for Analytical Labs

Ammonium Ion Specific Electrodes Glass:0.1 to 14000 mg / l

Send Inquiry
Request To Call Back
Product Image (MT-175A)

Ammonium Ion Specific Electrodes for General Labs

Ammonium Ion Specific Electrodes Range : 0.1 to 18000 mg / l

Send Inquiry
Request To Call Back
Product Image (MTEM-12)

Electro - magnet .

Price: 200.0 INR/Unit

Electro-magnet Electromagnet U. Composition- U-shaped soft iron core with suspension ring, 2 copper coils with safety sockets 4 mm, Hook base.

Send Inquiry
Request To Call Back
Product Image (MTPS-13)

Power Supply for Spectal Tubes

Price: 1000.0 INR/Unit

Power Supply for Spectal Tubes Safe and isolated: when the protective shutter opens, the power supply stops Study of line spectra Technical: Voltage: 5000 V Max. Current: 10 Ma Power supply: 230 V Dimensions: 118 x 120 x 375 mm.

Send Inquiry
Request To Call Back
Product Image (MTVI-30)

Variable Induction Coil 1.7 H

Price: 500.0 INR/Piece

Variable Induction Coil 1.7 H VARIABLE INDUCTION COIL 1.7 H Equipped with 2 carrying handles Ladder graduated in cm and Henry on both sides allowing reading in both directions The position of the soft iron core sliding in the coil by means of a worm is indicated by a red index. Inductance: variable from 0.2 to 1.7 H, - R = 18 Ohms, - Imax = 2 A, - Umax: 30 VAC and 60 VDC, Dimensions: 275 x 150 x 30 mm, Weight: 6 kg.

Send Inquiry
Request To Call Back
Product Image (MTUS-22)

12v / 24w Mirror Light Source

Price: 500.0 INR/Piece

12v / 24w Mirror Light Source Magnetic soleplate With 12V supply Cooled by a fan the light source equipped with one side of a semi-cylindrical lens produce convergent, divergent or parallel beams. On the other side, 2 lateral mirrors allow the mixing of colors when the source is equipped with colored filters. It is equipped with a magnetic sole. Composition: 1 light source with mirrors. 1 power adapter 12 V / 2 A supplied. 1 comb with 3 slots 2 black covers. Filters for light source with mirrors: Primary colors: Dimensions : 60 x 60 mm. / Lot of 3. Secondary colors: Dimensions: 60 x 60 mm

Send Inquiry
Request To Call Back
Product Image (MTLR-14)

Laplace Rail .

Price: 200.0 INR/Piece

Laplace Rail Size suitable for student labs Works under 3V - 2A With U-shaped magnet Connections on banana safety sockets. Voltage: 3VDC, Current: 5A, Dimensions (W x D x H) : 160 x 60 x 30 mm, Weight: 0.2 kg.

Send Inquiry
Request To Call Back
Product Image (MTXL-30)

Xenon Lamp Strobe

Price: 1000.0 INR/Piece

Xenon Lamp Strobe Easy to use. Equipped with ume xenon lamp and 4-digit display. 2 range of frequencies 100 to 1000 and 1000 to 10000 flashes / min. Accuracy: - 0.05%. Duration of operation lightning: 60 to 100 s Power supply: 220V, 50Hz Dimensions: 210x120x120mm Masses: 1 Kg

Send Inquiry
Request To Call Back
Product Image (MTEE-34)

Laser Information Transmission Assembly

Price: 500.0 INR/Piece

Laser Information Transmission Assembly Complete package for performing laser signal transmission experiments. The signal transmitted directly from the laser to the photodiode by putting the opening of the photodiode box in the path of the beam. It transmitted via an optical fiber. Composition of the assembly- 1 multifunction laser box - 1 photodiode box, - 2 amplification boxes,1 filtering capacitor box, - 1 1 m optical fiber- 1 jack-female cord, - Banana plugs.

Send Inquiry
Request To Call Back
Product Image (MTE-AM56)

Atomic Model

Atomic Model Study of the structure of the atom Transparent and robust model Constituted of a thick transparent plastic disc with a sphere in the center to represent the nucleus The circular orbits are clearly represented on the disc The electrons can be placed on the orbits Study of atomic numbers, atomic masses, electro-neutrality, charge Dimensions : 150 x 50 mm Composition 1 support disk, 10 blue pions, 8 green pions.

Send Inquiry
Request To Call Back
Product Image (ETE-MD85)

Apparatus Study of Molecular Movements

Apparatus Study of Molecular Movements Study of the kinetics of gases Highly visual to study of molecular motions Composition A plastic tube mounted on a speaker A plug at the top end closes the tube A piston is connected to a continuous low Voltage motor to produce an oscillatory movement An agitator control dimmer Metal balls to model the molecules Dimensions : 90 x 150 x 280 mm Output voltage : 6 V

Send Inquiry
Request To Call Back
Product Image (MTE-AB64)

Atomic Boxes

Atomic Boxes 111 Atoms Hydrogen (white) : 17 Ë (mm) Quantity: 40 1 hole Carbon (black) : 23Ë (mm) Quantity: 2 2 holes / 6 3 holes / 24 4 holes / 6 5 holes Azote (blue) : 23Ë (mm) Quantity: 4 4 holes Oxygen (red) : 23Ë (mm) Quantity: 12 2 holes Sulfur (yellow) : 23Ë (mm) Quantity: 1 2 holes / 1 4 holes Phosphorus (purple) : 23Ë (mm) Quantity: 4 4 holes Metal (gray) : 23Ë (mm) Quantity: 2 1 hole / 1 2 holes Halogen (green) : 23Ë (mm) Quantity: 8 1 hole Single (gray) : Quantity: 55 Multiple (gray) : Quantities: 25 Short (white) : Quantity: 60

Send Inquiry
Request To Call Back
Product Image (MTH-114BA)

Luminous Frame and Dissection Tank

Luminous Frame and Dissection Tank Cold light Safety extra-low voltage supply (SELV) Separable bowl frame Safe use in water the cold light does not heat the body and thus limits its degradation and the release of bad odors. Light suitable for shooting and videos. Adjusted to the tank, the frame does not hinder the operator during the dissection. Le cadre separated manually from the tank (without tools) to allow the cleaning there of CAILLACTISTIQUES CADRE LUMINOUS Dimensions (W x H x W) : 365 x 85 x 265 mm POWER SUPPLY AC ADAPTER DISPLAY PAN Dimensions (W x H x W) : 350 x 50 x 245 mm WHITE RIGID FOAM BOTTOM Dimensions (W x H x W) : 285 x 50x 185 mm

Send Inquiry
Request To Call Back
Product Image (MT-TE4)

Tulip Electricalizers

Tulip Electricalizers Chemical resistant tank Interchangeable electrodes 1 tank Dimensions:Ë 110 mm Height:80 mm Connection by safety bushings

Send Inquiry
Request To Call Back
Product Image (MT-TE1)

Battery Studing Device

Battery Studing Device Holder supporting the elements Allows the study of 5 redox couples 100 mL beakers low form Training set to study batteries by combination of redox couples (Zn2 / Zn, Cu2 / Cu, Fe2 / Fe, Pb2 / Pb, Al3 /Al). For use with metal blades The salt bridge between the two half-piles is provided by a filter paper band soaked in KCl.Composition - Transparent base with 2 slots for 100 mL low form beakers and 2 cable clamps. 2 electrode holders accepting flat electrodes (19 ” 0.8 ” 100 mm) and electrodes Ë 8 mm. 4 mm accepts banana safety cords.

Send Inquiry
Request To Call Back
Product Image (MT-MB5)

Metal Blades With Lead Marking

Metal Blades With Lead Marking Lead With chemical symbol marking Dimensions (L ” W ” E) : 100 ” 19 ” 0, 8 mm

Send Inquiry
Request To Call Back
Product Image (JS-4B)

Binocular Stereo

Binocular Stereo Lighting : incidental Halogen Head : Binocular Inter papillary adjustment : 55-75 mm Ocentric : Large field x 10 Lens Type : Removable x2 Magnification : x20 Focusing : Macrometric Statif Column Platinum : Valets carrier black and white object Working distance : 70 mm Power : Sector

Send Inquiry
Request To Call Back
Product Image (MTE-MB5)

Metal Blades Without Copper Marking

Metal Blades Without Copper Marking Bake Without chemical symbol marking Dimensions (L ” W ” E) : 100 ” 19 ” 0, 8 mm

Send Inquiry
Request To Call Back
Product Image (MTE-AB5)

Aluminum Blade

Aluminum Blade Material: Aluminum Dimensions (L ” W ” E): 100 ” 19 ” 0.8 mm

Send Inquiry
Request To Call Back
Product Image (MTE-SN69)

Kit Synthese of Nylon

Kit Synthese of Nylon Directly usable by the student even in the whole class Reduction of chemical risks and waste Opening of ampoules without risk of breakage Nylon synthesis kit 6-6 formulated without volatile organic solvent Benchtop even pupil in whole class

Send Inquiry
Request To Call Back
Product Image (MTK-320)

Inductor Decade Box

INDUCTOR DECADE BOX 1mH to 10H

Send Inquiry
Request To Call Back
Product Image (MT-791)

Paralleling board

PARALLELING BOARD Weight: 0.350kg (0.77lb.) Size : 15cm x 13cm x 5cm

Send Inquiry
Request To Call Back
Product Image (MTE-CG65)

CENTER GRID CERAMIC

CENTER GRID CERAMIC Grille steel Ceramic center

Send Inquiry
Request To Call Back
Product Image (MTEE-17)

FILTRATION CODENSATOR 4700 F

FILTRATION CODENSATOR 4700 ¼F Robust unbreakable polycarbonate Perfectly transparent support housing for better visibility of components The safety banana cords are connected to the side of the housing, which allows the front of the cords to be cleared and ensure a better readability of the fixtures. Test of robustness: supports a load of 100 kg Dimensions: 100 x 70 x 33 mm. 4700 ¼F / 6.3V

Send Inquiry
Request To Call Back
Product Image (MTEE-07)

Single Knife Switch for labs

Single Knife Switch Robust unbreakable polycarbonate Perfectly transparent support box for better visibility of components The banana safety cords are connected to the side of the case, which allows the front of the cords to be removed and make them easier to read. Robustness test: supports a load of 100 kg Dimensions: 100 x 70 x 33 mm.

Send Inquiry
Request To Call Back
Product Image (MTS-12069)

Radial Blade Pump

Radial Turbine Pump It is an all metallic properly constructed model, the impeller is surrounded by a number of stationary vanes one side is covered with plexi glass showing internal details, complete mounted on cast iron base. Height 300 mm approximately,

Send Inquiry
Request To Call Back
Product Image (EM-142N)

Digital UV-Visible Spectrophotometer

Microprocessor Uv-vis Spectrophotometer (Cat No. - EM-142N) MICROPROCESSOR UV SPECTRO PHOTOMETER : SPECTREAL Range 195 to 1000 nm Resolution 0.1 nm Sepctral Band Width 2nm Accuracy ï0.5 nm Repeatability ï0.3 nm PHOTOMETRIC Photometric Range % T : 0 to 100 % , Abs : 0 to 1.999 Conc.: 0 to 1999, K-Factor : 0 to 1999 Accuracy ï0.005 Abx at 1.0 Abs Stray Light Less than 0.1 % at 320 nm Data Readout Single Line LCD display Key Board 4 Keys, soft touch memberance type Serial Interface RS 232C interface Light Source a) Tungsten Halogen Lamp b) Deuterium Lamp (D2) Detector Wide range Silicon Photodiode Readability ï1 Count Printer Interface Printer interface for any centronics dot matrix printer Optics Complete mirror optics with resolution 1200 grooves/mm grating Power 230V ï 10% AC, 50 Hz

Send Inquiry
Request To Call Back
Product Image (MT-155M)

Isostatic Model

MODEL ISOSTASIE Non-messy: salt water Composition- Hemi cylindrical tank that filled by two types of liquids: - salt water - water-based gel - plastic parts of different colors with a density of about 0.83- two sliding indexes - two scales. The average density ratio (0,818) crust / coat being respected, the vertical movements during the handling are done in the same proportions as the reality. The plastic pieces of different colors make it possible to model different rocks and illustrate the phenomenon of erosion. The white pieces are used to model the melting of a polar ice cap. The graded scale illustrated by the sea level and the different indications of average depth of the continental crust allows making a quantitative study. To study illustrating the phenomenon of melting of a polar cap. To be able to observe the delay effect of the rebalancing, the manipulation carried out in the gel with water base. Density ratio slightly less precise : 0.87. Description- Set of 18 stackable elements of 0.83 density (16 elements of 3 assorted colors simulating the continental crust, 2 white color simulating the ice cap), - 2 removable graduated scales (one with value and one without value) Total height : 380 mm

Send Inquiry
Request To Call Back
Product Image (MTS-5075)

OHP Transparent Sheets

Over Head Projector Transparencies : Micro Teknik is manufacture, exporters & suppliers

Send Inquiry
Request To Call Back
Product Image (MTS-533)

Porosity Measurement Apparatus

Permeability Apparatus We are manufacturer exporter of Air Permeability Apparatus. This is massively utilized for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. Our Air Permeability Apparatus consists of perforated disc, plunger rubber stopper, permeability cell 12.5mm I.D. manometer U type mounted on stand with a built in stop cock, rubber tube 30cm long, packet of 12 filter paper disc and a bottle of 100ml dibutylphthalate liquid.

Send Inquiry
Request To Call Back
Product Image (MTEE-15)

Encapsulated LED

Protected Led Red LED LED in series with a protection resistor Rugged in unbreakable polycarbonate Convenient support housing The safety banana cords are connected to the side of the housing, allowing the front of the cords to be removed for a better fit readability of the fixtures. Dimensions: 100 x 70 x 33 mm.

Send Inquiry
Request To Call Back
Product Image (MTEE-15)

Shielded Light Emitting Diode

Protected Led Red LED LED in series with a protection resistor Rugged in unbreakable polycarbonate Convenient support housing The safety banana cords are connected to the side of the housing, allowing the front of the cords to be removed for a better fit readability of the fixtures. Dimensions: 100 x 70 x 33 mm.

Send Inquiry
Request To Call Back
Product Image (MT-157D)

Dissection Kit

Complete dissection kit with all surgical instruments

Send Inquiry
Request To Call Back
Product Image (MT-793)

Electrical Power Digital Measuring Units

Electrical Power Digital Measuring Units Specifications: Voltage cc:50 V(10 MV/V) Cc current:9.99A (250 MV/A) Voltage ca:60 V(10 MV/V) Ca current:9.99A(250 MV/A) Ca power:999W(1 MV/W) Power supply:220V,50/60 Hz

Send Inquiry
Request To Call Back
Product Image (MT-803)

Mechanical Power Digital Measuring Unit

Mechanical Power Digital Measuring Unit Specifications: Torque: .999 Nm(1mV/dgt) Speed:6000 rpm(1mV/rpm) Power:300 W(1 mV/W) Dc output : 0-36 V, 2 A Power supply: 220 V,50/60 Hz

Send Inquiry
Request To Call Back
Product Image (MTEE-07)

unbreakable Single Knife Switch

Single Knife Switch Robust unbreakable polycarbonate Perfectly transparent support box for better visibility of components The banana safety cords are connected to the side of the case, which allows the front of the cords to be removed and make them easier to read. Robustness test: supports a load of 100 kg Dimensions: 100 x 70 x 33 mm.

Send Inquiry
Request To Call Back
Product Image (MTS-571)

Standard Spatula for Soil Testing

SPECIFICATIONS: Available in various sizes. The sizes indicated are spatula lengths. Standard spatula width is 1" for all sizes. Material : Stainless Steel with Wooden Handle.

Send Inquiry
Request To Call Back
Product Image (JKA-8)

Student Nerve Muscle Assembly for Pharmacology use

STUDENT NERVE-MUSCLE ASSEMBLY Micro Teknik is manufacture is manufacture, exporters & suppliers of : STUDENT NERVE-MUSCLE ASSEMBLY

Send Inquiry
Request To Call Back
Product Image (MTS-575)

Tamping Rod for Soil Testing

Tamping Rod: This is used for compacting concrete into cube moulds. This rod is made of steel it is 16mm dia., 600mm in length and rounded at both ends.

Send Inquiry
Request To Call Back
Product Image (MTS-5054)

Tripod Stand for Mathematical Equipment applications

Tripod Stand Micro Teknik Tripod Stand For Ranging Rod (metal) To hold the ranging rod.

Send Inquiry
Request To Call Back
Product Image (MTS-21014)

Universal IC Tester for Electronic Testing and Measuring

Universal IC Tester: Micro Teknik is manufacture, exporters & suppliers Features 1. Tests a wide range of Digital ICs such as 74Series, 40/45 Series of CMOS ICïs 2. It can test Microprocessor 8085, 8086, Z80, 8051,89c51 3. It tests Peripherals like 8255, 8279, 8253, 8259,8251, 8155, 6264,62256,8288,82844. It tests Opamp,555, Transistor Arrays, Analog switches, Opto couplers and Others 4. It tests Seven segment display of common cathode& common anode type 5. It has Auto search facility of ICïs 6. Test by: Truth table /sequence table comparison. 7. Keys: 28 cherry keys Key pad with numerical &functional keys. 8. Display: 9 Digit Seven Segment Display. 9. Supply Input Voltage: 230V AC

Send Inquiry
Request To Call Back
Product Image (MTS-21015)

Digital Universal IC Tester

Universal IC Tester Micro Teknik is manufacture, exporters & supliers Features 1. Tests a wide range of Digital ICs such as 74 Series,40/45 Series of CMOS ICïs. 2. It can test Microprocessor 3. It tests Peripherals like 4. It tests a wide range of Analog Icïs such as ADC, DAC,Opamp, 555, Transistor Arrays, Analog Switches,Waveform Generator, Line Drivers, Voltages Regulators, PLLïs, VCO, PWM Generator, Sample &Hold, Voltages References, Opto couplers,Comparators, Voltages Followers and Others. 5. It tests Seven segment display of common cathode &common anode type 6. It has Auto search facility for Digital ICïs. 7. Test by: Truth table / sequence table comparison. Analog ICïs. 8. Keys: 50 cherry keys Key pad with numerical & functional keys. 9. Display: 16x2 Backlit LCD Display.

Send Inquiry
Request To Call Back
Product Image (EM -142ND)

Uv Visible Spectrophotometer for Mass Transfer Lab Equipments

Uv Visible Spectrophotometer

Send Inquiry
Request To Call Back
Product Image (MTS-579)

Deisel Vibrating Machine

PORKER VIBRATOR Use: compaction of concrete Standards: ï EN 12390-2: ASTM C31, C192: AASHTO T126

Send Inquiry
Request To Call Back
Product Image (EM-207)

Semi Automatic Water and Soil Analysis Kit

Water & Soil Analysis Kit (Cat No. - EM-207) "TEKNIK" DIGITAL WATER & SOIL ANALYSIS KIT. DISPLAY - 3 DIGIT LCD. RANGE TO MEASURE 7 PARAMETER; Ph , ORP , CONDUCTIVITY, TDS , DO TEMPERATURE, TURBIDITY .

Send Inquiry
Request To Call Back
Product Image (MTS-523)

Cube Mould for Soil Testing

Cube Mould, Mild Steel for Vibrating Machine: Description: The mould is mounted on a vibration platform with excentric mechanism. The machine is supplied complete with separate control panel with timer, but without cube moulds to be ordered separately. Power supply: 230V 1ph 50 Hz 250 W Weight: 100 Kg

Send Inquiry
Request To Call Back
Product Image (MTS-572)

Shrinkage Bar Mould for Soil Testing

Shrinkage Bar Mould: The mould is used for casting specimens of cement & aggregate combinations for measuring the potential expansive alkali reactivity. Specification : The mould, which has 25 mm x 25 mm x 250 mm, effective gauge length is made of mild steel and has accurately machined faces. The parts of the moulds are tight fitting and firmly held together when assembled. Supplied complete with base plate and four stainless steel smooth reference pins.

Send Inquiry
Request To Call Back
Product Image (MTS-564)

Electrical Sieve Shaker

Sieve Shaker Motorized Our immaculate range of Sieve Shaker is highly demanded in the market by our eminent customers. These Shakers are designed using excellent metal, which provides exceptional durability level with long lasting feature. Clients can avail in in various sizes, designs and shapes as per need with proper customization. Our experts design these trainers in complete adherence to the international standards so that we successfully meet the expectations of our patrons. Two types of sieve shaker available with us SIEVE SHAKER Use: Electrically shake aggregates on sieves. High frequency sieve shaker Electric operated 220 V-AC, 200 Watt.

Send Inquiry
Request To Call Back
Product Image (EM-251)

Digital Analytical Viscometer

DIGITAL VISCOMETER It has the advantage of high accuracy, stable digital display, easy to operate and good anti-interference. It is widely used in the measurement of viscosity of various kinds of fluid such as grease, paints, food, medicine, adhesive and cosmetics. etc. It can also be used to determine the viscosity resistance and absolute viscosity of the liquids. Its with led display. Measurement range is 10-1 x 105 mpa.s with 4 spindles, 6/12/30/60 rotor speed (rpm), + 5 % newtonian fluid. Provided with rs232c interface.

Send Inquiry
Request To Call Back
Product Image (JS-6M)

3W LED Binocular Microscope

Binocular Microscope Lighting: Transmitted 3W LED intensity adjustable Head: Binocular tube Siedentopf inclined at 30 rotating 360 EYEPIECE Large field : 10x / 20 mm Dioptric adjustment on a tube. Interpupillary distance : 47 to 76 mm Number of turret positions : 5 Lens type : E-Plan, economic DIN 4x / 0.10, 10x / 0.25, R40x / 0.65, R100x / 1.25 mm Reverse : 4-position with detents. Mounted on a ball bearing mechanism Magnification : x40 to x1000 Condenser: Abe ON 1.25, adjustable in height Diaphragm with graduation Opening for optional slide Focusing : Macrometric and micrometric coaxial, 2 ïm accuracy Friction adjustment. Platinum : 140 x 160 mm equipped with an integrated XY overhang of 79 x 52 mm Power supply : Internal power supply of 85-240 V

Send Inquiry
Request To Call Back
Product Image (MTS-1112)

Drop Temperature Tester

Drop Point Apparatus: Technical Description This is used for determining drop point of greases . It is an indication of the critical temperature of the solid or semi solid to the liquid state. The apparatus consists of brass sleeve and case with...

Send Inquiry
Request To Call Back
Product Image (MTS-9004)

Exhaust Heat Analyzer

Exhaust Gas Calorimeter: Micro Teknik Determination of the thermal exhaust gas losses is essential when calculating an energy balance for internal combustion engines. Calorimetric measurement is an established method of doing this. It involves a largely complete and loss-free heat exchange between the exhaust gas and a cooling medium. The exhaust gas calorimeter consists of an insulated stainless steel tank, through which the exhaust gas flows from bottom to top. While doing this, the exhaust gas gives up its heat almost completely to a finned pipe with cooling water flowing through it. The pipe is arranged in loops to achieve the maximum possible heat exchange area. Relevant temperatures (water and exhaust gas inlet and outlet) and the volumetric flow of the water are recorded electronically and displayed digitally using a measuring amplifier. The measuring amplifier is connected to the test stand using a data cable. This allows the measured data from the to be stored and processed using PC data acquisition. Connected to a test engine using a heat-resistant exhaust gas hose.

Send Inquiry
Request To Call Back
Product Image (MTS-469)

Soil Compaction Tester

Field Density App: Cutter is made of steel 100mm dia. x 130mm long with steel Dolly 25 mm high and 100 mm dia. fitted with a lip to enable it to be located on top of the core cutter. Supplied complete with rammer.

Send Inquiry
Request To Call Back
Product Image (P-F6)

Filtration Unit

Filtration Assembly: Kit comprises of: All Glass Membrane Filter Holder, Borosilicate Glass, 47mm, with Sintered disc for membrane support and aluminum duck clamp. Vacuum Pump, Compact and efficient. Silicon Rubber Tubing 6x9mm -1 mtr. Pack of 100 Membranes, 47mm.

Send Inquiry
Request To Call Back
Product Image (MTS-437)

Cement Mortar And Concrete Permeability for Soil Testing

Cement Mortar And Concrete Permeability Three pressure gauges for indicating pressure in each cell are supplied apart from the main pressure gauge which indicates pressure in chamber Features Available for three samples of size 150mm dia X 150mm high. Available for three samples of size 100mm dia X 100mm high. Accessories Compresssor with pressure gauge 0-20 kg/cm sq. with automatic pressure valve and pressure rubber hose. Suitable for 440 volts A.C. three phase. Specimen casting mould C.I. for 100mm dia X 100 mm high cylinders, Specimen casting mould C.I. for 150mm dia X 10mm high cylinders, Specimen casting mould C.I. for 150mm cubes, Blow stove 1/2 litre capacity, Resin, Bees Wax, Wire brush, Chissel, Spare glass cylinder 500cc capacity

Send Inquiry
Request To Call Back
Product Image (MTS-101020)

Chain Drive for mechanism

Chain Drive : Microteknik is manufacturer, exporter & supplier of Chain Drive Properly fitted on base.

Send Inquiry
Request To Call Back
Product Image (P-F1A)

Tablet Friability Tester

Microprocessor Friability Test Apparatus : (P-F1A) With digital preset revolution counter. The instrument will stop after set revolutions. (a) Single drum. (b) Double Drum.

Send Inquiry
Request To Call Back
Product Image (MTS-101056)

Hydraulic Brake System

Hydraulic Brake Unit (Two Brake Drums) : Unit consists of original but reconditioned components such as master cylinder brake drum complete with brake shoes and brake cylinders, brake pedal and necessary connections. In normal condition the brake drum can be easily rotated by the handle but on pressing the brake pedal, brake fluid in master cylinder is forced in brake cylinders thus expanding the brake shoes and stopping the rotation of drum. Brake drum is sectioned. Finish different colours.

Send Inquiry
Request To Call Back
Product Image (MTS -515)

Le-Chatelier Apparatus

Le-Chatelier Mould, as per IS: 5514, complete with glass plates & lead weight:

Send Inquiry
Request To Call Back
Product Image (JKA-5)

Surgical Paper Extension

LONG PAPER EXTENSION Micro Teknik is manufacture, exporters & suppliers of : LONG PAPER EXTENSION Can take paper upto 2 meters length and consists of a bar upon which one 6" x 3" cylinder slides. The forked arm is only to be slided over the drum leg to fix it in position. To achieve accurate alignment with drum leveling screws are provided.

Send Inquiry
Request To Call Back
Product Image (MTS-462)

Force Measuring Ring

Proving Ring for above, 2 kN (with our calibration) Dial Gauge for above, 0.01 x 25 mm

Send Inquiry
Request To Call Back
Product Image (MTK-321A)

Mini Solderless Prototyping Board

Prototyping Small Breadboard Size:8.5cm x 5.5cm Material:Plastic

Send Inquiry
Request To Call Back
Product Image (MTS-101296)

Centrifugal Turbine Pump

Radial Turbine Pump Micro Teknik Lt is an all metallic properly constructed model. the impeller Is surrounded by a number of stationary vanes. One side is covered with plexi glass showing internal details, Complete mounted on cast iron base. height 300mm approximately.

Send Inquiry
Request To Call Back
Product Image (MTS-476)

Fatigue Testing Machine for research labs

Fatigue Testing Machine: Our prime motto is to offer the utmost client satisfaction by manufacturing and exporting a technically advanced range of Fatigue Testing Machine. Best known for their attributes like lightweight, compact design and easy operation, these machines are used to test the fatigue strength of materials in various laboratories. In order to manufacture high quality Fatigue Testing Machine, our professionals employ advanced machines and utilize quality tested material procured from the authentic vendors. Our clients can avail these machines at a pocket friendly price. Further Details: The Machine is used to draw S-N diagram by Research Institution Laboratories, Material manufacturers, and various industries. This machine conforms to requirement of IS: 5075 - 1969 Standards. FEATURES : An interlocking system provided puts off the motor at specimen failure. Able model, no need of foundation. Simple lever system of changing load. Calibration is in Nm

Send Inquiry
Request To Call Back
Product Image (MTFB-16B)

Filament Bulbs E10 for labs

Filament Bulbs E10 Base E10 Bulb diameter: 10 mm, Inscription of the permissible voltage and current on the base Pack of 25. Voltage: 6 V Intensity: 100 mA

Send Inquiry
Request To Call Back
Product Image (P-D3)

Dissolution Rate Test Equipment for Pharmaceutical Lab

Dissolution Rate Test Equipment Dissolution Rate Test Equipment : This equipment is used to determine dissolution rate of tablets and complies with US-Pharmacopoeia-XVII standard with water constantly moving and holding temp. constant at 37 C ï 0. 5 C throughout the test. A 1000 ml capacity cylindrical vessel with flanges near the top is provided to accept 4 parts cover. Motor speed is controlled by a speed controller within a range of 25 to 150 RPM. A stainless steel basket is provided to hold samples. The machine works on 220V AC 50Hz single phase. Single test Combined unit for 3 tests. Combined unit for 6 tests.

Send Inquiry
Request To Call Back
Product Image (P-D3A)

Dissolution Rate Test Equipment with rpm setting

Microprocssor based with digital temperature controller Digital revolution with R. P. M. Setting. Digital temperature controller. Digital timer. Motorised up and down of the total stiring unit. A stainless steel basket is provided to hold samples. The machine works on 220V AC 50Hz single phase. A. Three tests B. Six tests C. Eight tests

Send Inquiry
Request To Call Back
Product Image (MTS-53)

Rain Gauge for Surveying Instruments

Rain Gauge : with glass conforming to Meteorogical Deptt.: Rain gauge is designed to measure the precipitation. This small Version consisting of upper and lower housing part, measuring cylinder; Housing made of stainless steel, orifice rim made of brass. Type 7019.0000 can be supplied with a receiving area of 100 cm2. (This type is not conforming to meteorological standards). Receiving area: 100 cmï. Rain measure (graduated glass): 250 cmï. measuring range: 0 t0 25 mm precipitation (relative to a receiving area of 100 cmï). Graduation: 1/1 mm precipitation. Dimensions: di115 mm; height 300 mm. Weight: approx. 0.8 kg.

Send Inquiry
Request To Call Back
Product Image (MTS-558)

Straight Edge for Soil Testing usage

Straight Edge: We provide our clients with Engineers Steel Straight Edges. These are widely used for checking straightness and marking purposes. Steel straight edges are made using high quality steel and are available in hardened and unhardened form. Our steel straight edges are hand scrapped or lapped to achieve the desired accuracy as per standards. Light in weight, design of these straight edges make them ideal to use in various industries such as Glass, Fabrication and windmill. The Engineers steel straight edges of bigger size are provided with milling slots to reduce weight. Our Steel Straight edges are supplied with computerized calibration certificate traceable to National Physical Laboratory (NPL, Govt Of India ) New Delhi. Specification: Dimensions L X B X H mm Straightness Microns um Parallelism Microns um 300 x 35 x 8 12 24 450 x 35 x 8 12 24 600 x 50 x 8 15 30 1000x 50 x 8 21 42 1200 x 55 x 10 25 50 1500 x 65 x 12 29 58 2000 x 65 x 12 37 74 2500 x 65 x 12 46 92 3000 x 85 x 18 54 108 4000 x 100 x 20 71 142 5000 x 100 x 20 87 174 6000 x 120 x 20 100 200

Send Inquiry
Request To Call Back
Product Image (MTS-101234)

Claw Clutch for Actual Cut Section Engines usage

Claw Clutch : Microteknik is manufacturer, exporter & supplier of Claw Clutch Properly Constructed model, one part having sliding groove. Complete on base with operating lever

Send Inquiry
Request To Call Back
Product Image (MTCB-12)

Cordon Bnc for General lab

Cordon Bnc Compatible with all types of BNCC plug BNC cord BNC safety Max. Voltage: 1000V

Send Inquiry
Request To Call Back
Product Image (MTS-101073)

Cotter Joint for Mechanism Engineering Models

Cotter Joint : Microteknik is manufacturer, exporter & supplier of Cotter Joint An all metallic section cut model.

Send Inquiry
Request To Call Back
Product Image (MTS-22007)

Two Shaft Gas Turbine Jet Engine

Two Shaft Gas Turbine Jet Engine Micro Teknik is manufacture, expoters & suppliers Technical Description Using the system, the operation of both a two-shaft system (vehicle, ship or generator drive) and a jet engine (aircraft propulsion) can be investigated. The turbine is started using a starter fan. The heart of the system is a gas generator comprising a compressor, combustion chamber and high pressure turbine. The energy in the exhaust is either converted into mechanical energy in the power turbine or accelerated using a nozzle and converted into thrust. The power turbine drives an asynchronous generator. It is easy to change from power turbine to thrust operation. The front of the unit has a display and control panel with a system diagram and digital displays for the process variables. Intake and exhaust silencing ensures low noise operation when using the power turbine. The turbine is equipped with the necessary safety devices. The use of propane combustion gas ensures odourless, clean operation. The system also requires a three-phase power supply and cooling water.

Send Inquiry
Request To Call Back
Product Image (MTS-17001)

Magnetic Separation

Magnetic Separation: Micro Teknik Specification drum-type magnetic separator for separation of magnetisable components from a solid compound separation by a fixed permanent magnet in an area of a rotating, non-magnetic drum feed hopper with vibrating trough for feed of solid compound to drum dosage of feed material by way of distance of hopper outlet from vibrating trough, throw and frequency of vibrating trough drum rotation speed adjustable by electric motor with potentiometer 2 steel tanks for separated fractions and 1 tank for solid compound Specification

Send Inquiry
Request To Call Back
Product Image (MT-101196)

Power Steering Model

Car Steering Working Model we are manufacturer and exporter of all type engineering models for engineering students. Civil Engineering models Mechanical Engineering models Cut Sectional Working Model

Send Inquiry
Request To Call Back
Product Image (MTMT-25)

Metallic Table

Metallic Table Utilization vertical Dimensions: 600 x 400 mm Thick sheet to perform all experiments with magnetic accessories. Support feet prefixed for vertical use.

Send Inquiry
Request To Call Back
Product Image (MTE-761)

Three-phase transformer

THREE-PHASE TRANSFORMER Voltage : 220-415 Volt Frequency : 50Hz Material : Mild Steel Rating : 1 KVA - 100 KVA

Send Inquiry
Request To Call Back
Product Image (MTS-585)

Digital Timer

Price: 100.0 INR/Piece
  • Application:Curing, mixing, and sedimentation timing
  • Capacity:99:59 Kg
  • Display Type:Digital
  • Feature:Loud audible alarm upon completion
  • Material:Plastic
  • Product Type:Laboratory Accessory
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTDI-15)

Boxes With Decade of Inductors

Price: 500.0 INR/Piece

Boxes With Decade of Inductors Number of decades: 7 Characteristics: 11,111110 H Mass: 1.4kg

Send Inquiry
Request To Call Back
Product Image (MTK-6855AL)

1 CYLINDER FOUR STROKE PETROL ENGINE TEST RIG WITH ROPE BRAKE/ ELECTRICAL BRAKE/HYDRAULIC BRAKE/ AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER

  • Color:White Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTDS-30)

Boxes With Decades of Capacity

Price: 500.0 INR/Piece

Boxes With Decades of Capacity Number of decades: 4 Characteristics: 11,110 K Weight: 1kg

Send Inquiry
Request To Call Back
Product Image (MTIP-45)

Immersion Probes for Manometric Tube

Price: 100.0 INR/Piece

Immersion Probes for Manometric Tube Glass probes4 glass probes of different shapes to demonstrate that the hydrostatic pressure depends on the depth and is exerted in all directions. Dimensions : 320 x 8/5 mm.

Send Inquiry
Request To Call Back
Product Image (MTMC-29)

Metallic Cylinders of Equal Mass (56 G)

Price: 50.0 INR/Piece

Metallic Cylinders of Equal Mass (56 G) Cylinders 40 mm: aluminum, copper, iron and zinc. With suspension button.

Send Inquiry
Request To Call Back
Product Image (MTMA-20)

Any Form on Magnet

Price: 500.0 INR/Piece

Any Form on Magnet Magnetized form for the study of moments and sums of forces. Holes 2mm equidistant from 10 mm. Maximum dimensions: 195 x 170 x 35 mm.

Send Inquiry
Request To Call Back
Product Image (MTVP-15A)

Manual Pump Vacuum Speaker

Price: 50.0 INR/Piece

Manual Pump Vacuum Speaker Ideal for college Easy to use Allows to study air properties (air mass, evidencing atmospheric pressure, boiling water according to pressure) Dimensions: 104 x 244 mm

Send Inquiry
Request To Call Back
Product Image (MTMT-26)

Magnetic Support

Price: 50.0 INR/Piece

Magnetic Support Multi-purpose magnetic support for fixing the shape for the study of the center of gravity the metal lever- Powerful neodymium magnets fixed to the base 43 mm. A 3 mm pin pierced transversely, is tightened on the axis for receive various fixed or rotating accessories.

Send Inquiry
Request To Call Back
Product Image ( JEQ-10)

Rotary Vacuum Pumps

Price: 1000.0 INR/Piece
  • Color:Black
  • Feature:Highly Efficient
  • Frequency:50 Hertz (HZ)
  • Power Source:Electric
  • Type:Rotary Vacuum Pumps
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MT-815L)

Luminous Intensity .

Price: 500.0 INR/Piece

Luminous Intensity Range : 0 to 150 000 lux Resolution : 27 lux Luminous Intensity (MT-816N) Range : 0 to 200 lux Resolution : 0.05 lux Luminous Power(MT-816T) Range : 0.1 to 10 W / m2 Resolution : 0.1 W / m2

Send Inquiry
Request To Call Back
Product Image (MTMS-54)

Freez Cube Freezer

Price: 1000.0 INR/Piece

Freez Cube Freezer An ice cube at -10C in minutes Saves time in the preparation of the TP, Change of state Allows you to observe the plateau of change of state, even for cyclohexane Economic The Freez Cube freezer is a device dedicated to state change experiments. It is composed of a 3 mL aluminum freezing bowl cooled by a Pelletier effect device The heat absorbed by the Pelletier module is discharged into the water contained in the cooling tank. Thermometer holder accepting the expansion thermometers and numerical most prevalent in the laboratories. Manual stirrer integrated in the freezing bowl to avoid observing the phenomena of super cooling. The freezing speed depends directly on its power supply between 6 V and 12 V continuous 5 A, which makes it feasible observation of the plateau of cyclohexane. Stackable devices for easy storage.

Send Inquiry
Request To Call Back
Product Image (MTE-TP61)

PINS . .

Price: 500.0 INR/Piece
  • Capacity:30 Milliliter (ML)
  • Color:Brown
  • Equipment Materials:Wooden
  • Feature:Highly Efficient
  • Power Source:Manual
  • Product Type:PINS
  • Type:PINS
  • Usage:Laboratory
Send Inquiry
Request To Call Back
Product Image (MTEE-25)

Disc With Index .

Price: 500.0 INR/Unit
  • Accuracy:100 %
  • Application:General Lab Equipments
  • Color:Black
  • Material:Mild Steel
  • Power Source:Manual
  • Product Type:Disc With Index .
  • Type:Disc With Index .
  • Usage:Laborarory
Send Inquiry
Request To Call Back
Product Image (JDE-01)

Deionizers .

Price: 2000.0 INR/Unit
  • Automation Grade:Automatic
  • Color:Black Red Blue
  • Equipment Materials:Mild Steel
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Type:Deionizers
  • Voltage:220 Volt (v)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image ( JEQ-1C)

Laboratory Autoclave

  • Color:Silver
  • Material:Stainless Steel
  • Operate Method:Manual
  • Product Type:Laboratory Autoclave
  • Temperature Range:240 Celsius (oC)
  • Usage:Industrial
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JEQ-250P)

LYPHOLIZER TABLE TOP

Price: 470000 INR/Piece

LYPHOLIZER TABLE TOP The table top and pilot models of Lyophilizer designed are for their applications at laboratory and pilot level as high Performance Research & Development Freeze Drier.

Send Inquiry
Request To Call Back
Product Image (JKA-283)

Variable Interrupter

  • Application:Lab
  • Color:Black Silver
  • Material:Mild Steel
  • Power Source:Manual
  • Warranty:1 Year
  • Weight:10-15 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JKA-245D)

Isolated Organ Baths Digital

  • Color:Transparent
  • Frequency:50 Hertz (HZ)
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image ( MT-101329)

Working Model of Chain Conveyor

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Voltage:220 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-101715)

PLATE & FRAME FILTER PRESS APPARATUS

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:240 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (JKA-65)

Manometers .

Price: 14200.00 INR/Unit

Manometers (Cat No. - JKA-65) Manometers : All Manometers are fabricated from true-bore Boro-silicate glass, floats are perfectly lapped to eliminate leakage and are fitted with feather weight Stainless Steel capillary. Various types of Manometers are:- Standard Mercury Manometer : Without stopcock, with adjustable scale Water Manometer : Without Stopcock, with adjustable scale Water Manometer : With stopcock and adjustable scale Condons rat B.P. Manometer : With special fine tube and cannula fitted with scale fixing rod

Send Inquiry
Request To Call Back
Product Image ( JP-3)

Paraffin Embedding Bath

Paraffin Embedding Bath The body is made of mild steel sheet which is duly painted. The top is made of M.S. / S.S. sheet. Completed with wax pots with covers. Temperature ambient is upto 70C controlled by a thermostat to work on 220V AC 50Hz single phase. The following compositions are available:- I) 4 cups and 6 glass tube. II) 6 cups and 8 glass tubes. III) 12 cups and 12 glass tubes.

Send Inquiry
Request To Call Back
Product Image (JKA-172)

Small Animal Operating Table

Price: 15000.00 INR/Unit

Small Animal Operating Table (Cat No. - JKA-172) Small Animal Operating Table : Suitable for rabbits, rats, guinea pigs and such like small animals. Top is of stainless steel and provided with adjustable head holder, tie-cleats, cut-back at the head-end with warming chambers. Power Table : Made of wood with teak ply. Teak top removable dimension of table 36" height x 48" long x 20"wide. Stainless steel shaft 3/4 diameter with cone pulley for different range in 5/6 steps of 3 & 300 RPM. It can be operated on HP motor complete table with handle and caster for easy movement.

Send Inquiry
Request To Call Back
Product Image (JEQ-4EC)

CONTROLLED ENVIRONMENT CHAMBER

Price: 1500 INR/Piece

Controlled Environment Chambers are used to create replicated environmental conditions for research sample growth and testing through temperature, humidity, CO2, O2 Gas and lighting control. Feature: Multi-purpose Chamber Stability Testing. Seed Germination. Tissue Culture. Algae. Arabidopsis. Plant Growth. Bacterial Culturing. Drosophila Research, Insect. Reptile rearing and Research. Scalable Customizable Options: Air Heating, 6 Side Heating, Water Jacked. Ultrasonic Humidifier. Steam Generator Humidifier. Ultrasonic Humidifier and Dehumidifier. CO2 control. CO2 Incubator Mode O2 Control. Hypoxia Incubator Mode. N2 Control. -Tri-Gas Incubator Mode. CO2 removal system. Dimmable Natural lighting/Grow Lighting. Convenience receptacles. Extended temperature 2 to 70C.

Send Inquiry
Request To Call Back
Product Image (JKA-92)

Student Isometric Lever

  • Color:White
  • Feature:Durability, Portable
  • Material:Steel
  • Power Source:Manual
  • Usage:Hospital Use
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JKA-173)

Power Table

  • Color:Silver
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power:220 Volt (v)
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
  • Weight:20 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTPS-60)

Fixed Power Supplies

Price: 1000.0 INR/Piece
  • Accuracy:100 %
  • Automation Grade:Automatic
  • Color:White
  • Feature:Highly Efficient
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Usage:General lab equipments
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (JEQ-4G)

Teknik Automatic Co2 Incubator

  • Automation Grade:Automatic
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (JEQ-4G)

Teknik Laboratory Co2 Incubator

  • Automation Grade:Automatic
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (P-T8)

Tincture Press

  • Capacity:1 Ltr
  • Color:Red
  • Material:Mild Steel
  • Operate Method:Manual
  • Product Type:Tincture Press
  • Usage:Pharmaceutical Lab
Send Inquiry
Request To Call Back
Product Image (JEQ-3A1)

Humidity Oven

  • Color:White Green
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Product Type:Humidity Oven
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JEQ-17CD)

COD Digester

  • Color:Black White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Use
  • Voltage:230 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JEQ-4G)

Carbon Dioxide Incubator

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (EM-27)

Actophotometer .

  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Pharmaceutical Lab
  • Voltage:100 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (JEQ-1A)

Vertical Autoclaves

  • Color:Silver
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (P-P1)

Plythesmography .

  • Color:Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Product Type:Plythesmography
  • Usage:Pharmaceutical Lab
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (J-9)

Automatic Razor Sharpener Spencer Type

  • Automation Grade:Automatic
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Day
Send Inquiry
Request To Call Back
Product Image ( (Cat No. - EM-28B))

Radiant Heat Digital Type

Radiant Heat Digital Type (Cat No. - EM-28B) Radiant Heat Digital Type : (Mark IV) with Digital chronoscope. Same as mark-I, but with foot switch & digital time interval counter.

Send Inquiry
Request To Call Back
Product Image (MTFM-29)

Impulse Water Turbine

  • Automation Grade:Automatic
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (EM-22)

Telethermometer .

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Pharmaceutical Lab
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-101327)

Working Model of Belt Conveyor

  • Color:Grey Black
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (P-D1)

Disintegration Test Machine

  • Color:Yellow White
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Pharmaceutical Lab
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (P-V2)

V Cone Blender

  • Color:Silver
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Product Type:V Cone Blender
  • Usage:Pharmaceutical Lab
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (P-S5)

Sterility Test Apparatus

  • Color:Silver
  • Material:Stainless Steel
  • Operate Method:Manual
  • Product Type:Tablet Making Machine
  • Usage:Pharmaceutical Lab
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image ( JST-1)

Seed Germinator Single Chamber

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Aluminium, Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JKA-201)

Spirometer .

  • Capacity:6 Ltr
  • Color:Silver
  • Material:SS
  • Usage:Pharmacology Lab
  • Warranty:1 Year
  • Weight:20 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JKA-165)

Embalming Table

Price: 15400.00 INR/Unit

Embalming Table (Cat No. - JKA-165) Embalming Table is truly a combination table, ideal for embalming, dressing and transfer. The table is constructed of a stainless steel top with a convex surface, stainless steel frame and 6" ball-bearing wheels. The swivel wheels lock to keep the table stationary while in use. The drain, located in the center of the foot end, quickly eliminates fluid from the table. Features and Specifications: Length: 82" Width: 30.75" Height: 35.25" Wheelbase: 69.5" x 27"Weight: 83 lbs. Max Load Weight: 600 lbs.6" wheels keep table stationary while in use.

Send Inquiry
Request To Call Back
Product Image (MTS-10)

Automatic Electronics Levels and EDM

  • Automation Grade:Automatic
  • Color:Grey
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-CRA)

CELL PRODUCTION ROLLER APPARATUS

Price: 2000 INR/Piece

MT-CRA This standard cell production roller culture apparatus allows flexibility for scale-up and production of monolayer cell cultures in standard roller bottles. The system consists of a base drive unit and five-position roller deck to which additional roller decks can be added. A powerful DC motor, with soft-start speed control, drives the bottles through a series of durable non slip belts. The all-position drive is a positive traction drive system for lightweight plastic bottles, in which each roller is individually driven. Feature: Accepts bottles from 108 to 121 mm in diameter and up to 550 mm in length Smooth ramping digitally controlled rotation, accurate to 0,1 rpm Maintenance-free precision brushless motor Bright LCD for easy operation Multiple decking and capacity configurations available for process flexibility

Send Inquiry
Request To Call Back
Product Image (JEQ- 1R)

Autoclave Rectangular

AUTOCLAVE RECTANGULAR Micro Teknik is manufacture, exporters & suppliers of : AUTOCLAVE RECTANGULAR Inner Chamber is made up of thick non-magnetic steel of 304/316 quality and jacket is made out of rolled steel. Single door made of rolled steel lined with S.S. sheets has radial locking system. All units are hydraulically tested upto 40psi. The space between outer cover made of thick rolled steel sheet and the steam jacket is filled with asbestos sheet or glass wool to minimize thermal losses. Boiler is made of thick stainless steel sheet and is located under the sterilizer. Unit is fitted with water level indicator, safety valve, pressure gauge, water inlet and drain valves. Unit is also fitted with low-water level cut-off device and automatic pressure control device. Rectangular sterilizes are fitted with SELF LOCKING SAFETY DOOR device. The door cannot be opened when chamber is under pressure. Two separate valves are provided for evacuating steam from inner chamber and jacket, as and when desired. Fitted with safety valve as a safety device. Drain valve is fitted at the side bottom for easy draining/cleaning. Fitted with vacuum breaker to break vacuum in case of formation of vacuum due to steam condensation. Triple Walled with Steam Jacket and Separate Boiler. Sterilization cycle is controlled by Multiport Valve. The unit is fitted with all standard accessories. To work on 440 volts, 3 Phase, A.C. Supply.

Send Inquiry
Request To Call Back
Product Image (MTE-774)

Repulsion-Start Motor

  • Color:Silver
  • Frequency:60 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-101442)

Vapour Liquid Equilibrium Setup

Vapour Liquid Equilibrium Setup: Micro Teknik manufactures and supplies optimum quality Vapour Liquid Equilibrium Set-Up, useful in study of the vapor-liquid equilibrium. This robustly constructed product is easy to operate and maintain. Specifications: Input voltage: 100240V AC Frequency: 50/60Hz Tidal volume range (V t): 0 mL to 1,500 mL Patient airway pressure range: -2kPa 10kPa

Send Inquiry
Request To Call Back
Product Image (MTS-101433)

Vapour In Air Diffusion Apparatus

Vapour in Air Diffusion Apparatus The setup comprises all needed accessories for determining the diffusion coefficient of vapors (liquid) in air phase. The diffusion vessel is of high quality Borosilicate Glass, along with a T type diffusion tube engraved in mm scale for level readings. The vessel is mounted over a Magnetic Stirrer cum hot plate, given with controls for vary the temperature and RPM for calculating the diffusion rate at different temperature. The Air Flow stream is created making use of mini-air pump. Diffusivity of the vapors is determined by WINKELMANN method, in which liquid evaporates in a graduated vertical glass tube over the top of which a stream of air is passed. Experiments Determining diffusion coefficient for liquid / vapor in air system Features Painted structure Simple to operate and maintain Compact set up

Send Inquiry
Request To Call Back
Product Image (JEQ-8)

Tray Dryers

Tray Dryers The Tray Dryers have a double walled construction, while the gap is filled with the glass wool for temperature insulation. Inner and outer walls of the tray dryer are made out of thick mild steel sheet on stout mild steel angle with motorized air circulation. It comes with a dial type thermometer. The temperature range ambient to 150 C. Technical Specifications:- Suitable tray size: 32 x 16 x 1 Chamber sizes in inches Rating No. Of trays 33 x 33 x 347.5 kw24 68 x 39 x 3612.0 kw48 72 x 77 x 3618.0 kw96 33 x 33 x 123.0 kw6 33 x 33 x 175.0 kw12 Optional : Digital temp. indicator-cum-controller Digital temp. indicator-cum-controller with computer data logger

Send Inquiry
Request To Call Back
Product Image (MTS-101434)

Solid In Air Diffusion Apparatus

Solid in Air Diffusion Apparatus The set up comprises glass column, air rotameter, piping and packing material. Metered quantity of airflow is passed through the vertically upwards packed bed. The flow rate can vary for simulating several conditions making use of rotameter. Naphthalene balls are used to form the packed bed for the calculation of mass transfer co-efficient of vaporization in air. Experiments Calculation of the mass transfer co-efficient of vaporization of naphthalene in air, making use of a packed bed of spherical particles of naphthalene. Features : Painted structure Simple to operate and maintain Stand alone set up

Send Inquiry
Request To Call Back
Product Image (JEQ-9)

Muffle Furnaces

Muffle Furnaces We bring forth Muffle Furnaces with double walled construction of thick PCRC sheet. Shoving enamel for outside finished and ceramic wool for gap insulation. Heating elements of kantha A-1 wire fitted with energy regulator, silver thermal fuse, thermocouple, pyrometer, main lead with power plug to work on 220V AC 50Hz single phase.

Send Inquiry
Request To Call Back
Product Image (MTS-101422)

Liquid-Liquid Extraction In Packed Tower

Liquid-Liquid Extraction in Packed Tower Micro Teknik has designed this setup for demonstrating principles of liquid-liquid extraction and mass transfer operation in a packed column. This set up comprises the following: Glass column Packing Feed tanks Air regulator with pressure gauge Receiving tanks Piping Rotameter for flow measurement Experiments Determination of overall height of a transfer unit and overall volumetric mass transfer coefficient Features : SS tanks and wetted parts Simple operation & maintenance Compact & stand alone set up Special arrangement for changing height of interface zone Continuous operation Painted structure Utilities Required Electric supply: 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing 5A, three pin socket with switch for Compressor Water supply & drain Chemicals for trial Compressed air supply: Clean, oil and moisture free air, pressure 2 Bar

Send Inquiry
Request To Call Back
Product Image (MTS-12070)

Gear Pump Demonstration Unit

Gear Pump Demonstration Unit - MTS-12070 The Gear Pump Demonstration Unit uses a gear pump, that is widely used of the positive action rotary pumps. Two gear wheels are operational from inside a casing. One gear wheel is driven whilst the other gear wheel rotates in mesh with it. Liquid is transported in the space between consecutive teeth and then ejected as the teeth mesh. This pump has no valves. This positive displacement pump is designed to deliver against high pressures. It can be used for high viscosity fluids. Experiments of Gear Pump Demonstration Unit To measure overall as well as pump efficiency of the gear pump. To plot Head vs. Discharge, Pump efficiency vs. Discharge Features of Gear Pump Demonstration Unit SS tanks and wetted parts Painted structure Closed loop circulation Compact set up Simple operations & maintenance

Send Inquiry
Request To Call Back
Product Image (JEQ-4A)

Bacteriological Incubator

Bacteriological Incubator (Memmert type) has a double walled construction. Aluminum or stainless steel sheet is used for inner chamber, while mild steel sheet finished in powder coated color combinations is used for outer chamber. Glass wool is used for filling gap for temperature insulation. Double walled door with double glass window to observe the chamber. A thermostat controls the temperature range 5 C above ambient to 800C ± 10C. L-shaped thermometer is provided together with pilot lamps, on-off switch temperature control knob, etc. It is operational on 220V AC 50Hz single phase. Chamber sizes in mm:- 300 x 300 x 300 355 x 355 x 355 455 x 455 x 455 455 x 605 x 455 605 x 605 x 455 605 x 605 x 605 605 x 910 x 605 Optional:- Digital temperature controller-cum-indicator Digital temperature indicator-cum-controller with computer data logger Air circulating fan Timer 24 hours Note : Oven & incubator sizes not covered, but can be made on demand.

Send Inquiry
Request To Call Back
Product Image (JP-5S)

Tissue Culture Station Single Unit

Tissue Culture Station Single Unit Tissue Culture Station Single Unit is Compact model, suitable for use in small Laboratories. Supplied with One S.S. Basket Rotor, One S.S. Tissue Basket, One S.S. Wax Bath, 24 Nos. S.S Tissue Capsules, 6 Nos. S-type Dividers. Suitable to work on 220 V, single phase, 50 Hz, Ac supply.

Send Inquiry
Request To Call Back
Product Image (JEQ-6V)

Vacuum Centrifuge

Vacuum Centrifuge Vacuum Centrifuge : Heavy duty motor to work continuous & long time comprising heavy rotor head. Speed controlled by continuous variable speed controller. Vacuum pump capacity 25 litre per hour with 0.25 H.P. Motor Equipment to discharge controllable fumes mixed with running water Provided with Ammeter, Voltmeter, Rpm meter, Vacuum Pressure Controller, Vacuum Gauge

Send Inquiry
Request To Call Back
Product Image (JEQ-5D-ii)

Shaking Machine Sieves Rotor Type

Shaking Machine-sieves Shaking Machine Sieves (Rotor type) used for dry sieve tests to carry 7 sieves of 6" or 8" diameter sieves. Driven by 0.25 HP motor through reduction gears. The Gear mechanism runs in a oil-bath. Tapping motion is achieved by hammer from top. To work on 220V AC 50Hz single phase. Supplied with adopters for 8" sieves but without sieves with Automatic 0-60 minutes timer.

Send Inquiry
Request To Call Back
Product Image (MTS-101180)

Car Engine Diesel Handle Driven

Car Engine Diesel : Handle Driven : Microteknik is Manufacturer, Exporter & Supplier of Motor Car Engine. (Fitted with F.H.P. 220 Volts A.C. Motor)

Send Inquiry
Request To Call Back
Product Image (MTS-458(b))

CBR Load Frame Single Speed Motorized

C.B.R. Load Frame Single Speed Motorised (Motorised) Single Speed For determining the triaxial shear strength of soil specimens of 38mm, 50mm, 75mm and 100mm dia. Consists of : One load frame 5000 Kgf motorised , consists one rate of strain type, giving the following rates of strain. 1.25mm/min . Load frame is supplied with a dial gauge bracket. Universal triaxial cell (stationary bushing) 10kg/cm.sq. One lateral pressure assembly 0-10 kg/cm.sq. One lateral pressure assembly 0-10kg/cm.sq. complete with foot pump and rubber hose. One high sensitivity proving ring capacity 1000kg. One strain dial gauge 0.01 x 25mm. Suitable for operation on 230 V A.C .

Send Inquiry
Request To Call Back
Product Image (MTS-469)

Devil Abbrasion Machine

Devil Abbrasion Machine We are offering a highly reliable Devil Abbrasion Testing Machine that is used for determining resistance to wear by attrition. These machines are manufactured using quality approved raw material by our vendors who are reckoned for manufacturing highly reliable devil attrition testing machines. Offered machines are highly reliable as these are manufactured by a team of expert professionals having deep and through knowledge. Customers can avail these qualitative machines from us. Specifications: Two iron cylinders 77/8" dia 133/8" long. Dust and water-tight covers. Mounted on a shaft with their axis inclined at 30 deg to the axis of rotation of the shaft. Rotation speed is 30-33 r.p.m. Driven by 1 h.p. three phase 440 volts. A.C. Electric motor.

Send Inquiry
Request To Call Back
Product Image (MTS-557)

Sand Equivalent Apparatus

Sand Equivalent Apparatus, single cylinder: Plastic Measuring cylinders 1 Carrying case. 1 Weighted foot assembly. 1 Irrigator tube. 1 Rubber tubing complete with pinch clip. 1 Syphon assembly, with 5 litre polythene bottle. 1 Funnel. Accessories: a) Syphon Assembly,with 5 litre polythene bottle required.Supplied without rubber tubing. b) Calcium Chloride 2.5 kg. c) Formaldehyde, 40% solution, 2.5 litres. d) Glycerol Analar 2.5 kg.

Send Inquiry
Request To Call Back
Product Image (MT-818M)

TESLAMETER .

TESLAMETER Range:10 to 50 mT 100 to 500 m Tolution:0.025 mT 0.25 mT

Send Inquiry
Request To Call Back
Product Image (MTS-458(a))

C B R Load Frame Three Speed Motorised

C.B.R. Load Frame Three Speed Motorised Load Frames Our Load Frames are used to apply load on the test specimen. The capacity and speed depends on the requirement of a particular test and these are used in C.B.R. triaxial, unconfined compression test. Further, these are Ideal for using mobile laboratory.Load Frame, Motorised, 30 speeds (50 kN) cap.Two Pillar type, Detachable frame, Enclosed motor and gear system, Jewel lamps indicating direction of motion, Speed chart.Consists of a cabinet which housed the gear system & motor with sturdy angle iron frame.The loading is done through the bottom loading platen, which is carried on a lead screw which advances upwards.The top load bracket which slides over two upright pillars, can be positioned at any desired height and locked. It caries a screw adaptor for standard Proving ring. Rate of strains : 30, ( 6 mm/min to 0.00048 mm/min by interchanging the drive and driven gears, another set of 24 rates of strain can be obtained. 220V, 1 Ph, 50 cycles, AC supply.The Loading part of the unit is detachable from the main unit for ease of transport and to avoid damage to the tension rods.

Send Inquiry
Request To Call Back
Product Image (MTS-561)

Softing Point

Softing point appratus: Description: The softness of bitumen depends, amongst other factors, on the temperature of the substance, where, as the temperature is raised, the softness of the bitumen increases. The unit consists of a pyrex breaker, brass frame, two tapered rings, two ball centering guides and two balls. Weight : 900 g

Send Inquiry
Request To Call Back
Product Image (MTS-470)

Field Density Apparatus

Field Density App., 15 cm: We offer Field Density Test Apparatus - Sand Replacement. Sand Replacement Method: Three sizes Available. 10cm (Small Size) 15cm (Medium Size) 20cm (Large Size) 10cm (Small Size) :- Sand Replacement Method. Consists of Sand Pouring Cylinder, one calibrating container 10 cm dia & a square tray of 30 cm x 30 cm with a central hole of 10 cm diameter. Relevant Standard : IS : 2720(Part-XX VIII) 15cm (Medium Size) : Sand Replacement Method. Consisting of Sand Pouring Cylinder container metal tray hole in the center. 20cm (Large Size) : Sand Replacement Method. with calibrating container of 250mm internal depth, one metal tray 450 mm square and 50 mm deep with a 200 mm dia hole in the center.

Send Inquiry
Request To Call Back
Product Image ((Cat No. - EM-1101))

Digital Photo Fluorometer

Digital Photo Fluorometer:- Fluoro Sensitivity Full scale deflection obtained with 1 ppm quininesulphate in 0.1 N sulphuric acid (primary wavelength 360 nm). Display 3 digit bright red seven segment LED display. Excitation Source 12 V, 50 W Tungsten Halogen Lamp. Sensitivity Range Adjustable in 4 ranges.

Send Inquiry
Request To Call Back
Product Image (MTS-101052)

Internally Expanding Brake Model

Internally Expanding Brake : Miicroteknik is manufacturer, exporter & supplier of manufacturer, exporter & supplier of Internally Expanding Brake The model consists of a hollow drum, two shoes are pivoted pins. Braking action can be seen due to application of the force on the cantiIever.

Send Inquiry
Request To Call Back
Product Image (JKA-2)

Research Kymograph

RESEARCH KYMOGRAPH Range of fine vertical adjustment 15cm.Close mesh 10 speed gear box, gear ratios 1:2 no. Backlash.Instantaneous start at all speeds with built in vibration free, noiseless motor,speed variation from 1 rev. In 25 min. To i rev in ii hours.Research Kymograph permissible paper length 2. 5 meters, adjustable along machined 120 cm bed; automatic paper tensioning devices, flat writing surface attachment 3 jointed arm uprights with fine tangential adjustment,auxiliary cylinder with fine tilt adjustment to permit equalization of tensionat the top & bottom of the paper, neutralization clutch for immediate start &stop, centralized electrical points for respiration pump, time clock and operation table, mounted on heavy metal platform with castora, with manometer & two way time marker.

Send Inquiry
Request To Call Back
Product Image (MTS-12073)

Centrifugal Pump Iron Base with Pulley

Centrifugal Pump Iron Base with Pulley An all metallic section cut small size demonstration model made of cast aluminium parts. Rotator presses water outward by centrifugal action. Complete on a cast iron base with a pulley. An all metallic section cut small size demonstration model made of cast aluminium parts. Rotator presses water outward by centrifugal action. Complete on a cast iron base with a pulley.

Send Inquiry
Request To Call Back
Product Image (MTS-12082)

Besser Convertor Model

Besser Convertor: Micro Teknik The model is much helpful In having clear grasp of Bessmer method of steel manufacture. Ills clearly labelled and colour scheme fully demonstrates the refractory lining. the steel shell Is mounted on a turnlon to demonstratic filling arrangement. the blast system constitutes another Important feature of the model. The complete unit Is mounted on 45x30 cm base board.

Send Inquiry
Request To Call Back
Product Image (MTS-33)

Substance Bar

Description/ Specification of Substance Bar: Substance Bar complete with all standard acc and telescopic tripod stand name of wood/aluminum . Generally required in Draughtsman Suveyor trade of ITI as per NCVT syllabus.

Send Inquiry
Request To Call Back
Product Image (MTS-13042)

Aggregate Impact Testing Machine

IMPACT TESTING MACHINEMICROTEKNIK are the Best Manufacturer and Suppliers,Exporter Company in India tests Aggregate impact value and Resistance of aggregate to shock or impact. Specifications: Made of plated steel against corrosion, safety locking bar, and built in counter. Cylindrical Measure Machine steel, 75 mm diameter., 50 mm deep. 2 Tamping Rod Galvanized steel, 3/ 8" (9.3mm) diameter, 8" (203mm) length.

Send Inquiry
Request To Call Back
Product Image (MTS-465)

Direct Shear

Direct Shear, Motorised, 12 Speed The apparatus comprises of the following. LOADING UNIT :Supplied with load yoke with direct and lever system for applying load. Normal stress capacity 8 kg/sq. cm. Load is applied either directly or through a counter balanced detachable lever. Provision is made for the load to be applied either through a steel ball recessed in the loading pad or direct through a boss on the pre calibrated loading yoke. The loading unit is provided with V strips and roller strips for frictionless movement of shear box housing. SHEAR BOX ASSEMBLY :Comprising direct shear box in two halves for a square specimen size 60 x 60 x 25mm one pair of plain gripper plates, One pair of perforated gripper plates, one pair of porous stones, one top of loading pad. SHEAR BOX HOUSING:Accommodates the direct shear box assembly. Complete with two ball roller strips. Specimen cutter : for cutting 60 x 60 x 25mm. Specimen form larger samples. Set of weights to give a normal stress of 3kg/sa.cm. Through larger as following : - To give kg/cm. 0.05,Qty. 4 nos.To give kg/cm. 0.1,Qty. 1 no.To give kg/cm. 0.2,Qty. 1 no.To give kg/cm. 0.5,Qty. 3 nos.To give kg/cm. 1.0,Qty. 1 no. Complete set as above but without proving ring. Net weight 140 kg. ESSENTIAL ACCESSORIES :High sensitivity compression proving ring. Cap 200kg. One consolidation dial gauge 0.01mm x 25mm and one strain dial gauge 0.01mm x 25mm OPTIONAL EXTRAS :2 Additional set of weights to give a normal stress of 5 kg/cm . Soil sampler for 60mm x 60mm specimen and test forms pad of 50. SPARES : Porous stone for 60mm x 60mm size sample available in pairs. Unit is electrically operated to give the following 12 rates or strains. 1.25, 0.625, 0.25, 0.125, 0.05, 0.025, 0.01, 0.005, 0.002, 0.001, 0.004 and 0.0002 mm/min. The apparatus is suitable for operation on 230 Volts Single Phase A.C. Supply.

Send Inquiry
Request To Call Back
Product Image (MTAT-04C)

Sieves Shaker Gyratory Motorized

SIEVE SHAKER (GYRATORY) It may be defined as the sieve shaker is designed to carry up to 7 sieves of 6 inch or 8 inch diameter. The 12 inch dia. sieves can be used with the help of Adaptor. A 1/4 HP. motor through a reduction gear immersed in oil drives the shaker. The sieve table dies not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. Features In addition to the Gyratory motion of the table, there is an upward and downward movement ensuring that each square inch of the sieve is utilized. The whole gear mechanism runs is an oil bath Robust construction Unmatched performance Long service life Easy installation Technical Specification The sieve table dies not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. If the stop-pin below the table is removed, the shaker can have a rotary motion. In addition to this gyratory motion of the table, there is an upward & downward movement ensuring that each square cm of the sieve is utilized. A pair of rods and a holder are supplied The holder can be fixed on the top of the upper most sieveand thus the sieve set is firmly held. Suitable for operation form 230 volts, 50 cycles phase, A.C. supply. Available in digital display model also. The shaker is suitable for heavy materials; powders or granules. The sieve table is inclined to the vertical axis and the direction of inclination changes progressively, in a clock wise direction. in addition to the gyratory motion 15 R P M. of the table, there is an upward and downward movement of tapping is 188 per min, ensuring that each square centimeter of the sieve is utilized. The whole gear mechanism runs in Grease because it fill with Grease

Send Inquiry
Request To Call Back
Product Image (MTAT-04B)

Sieves Shaker Hand Operated

Sieve Shaker (Hand Operated) It is may be defined as the light, portable but sturdy sieve shaker suitable for bench mounting. The side to side movement to the carrier which can take upto 7 sieves of 150 mm or 200 mm diameter is through a train of gears operated by a hand wheel. A heavy fly wheel ensures smooth operation. Features: Operated using a hand wheel Longer service life Light weight Simple to use Accurate working Feasible prices Superior quality High strength Easy to use Affordable Technical Specification: This is similar to above sieve shaker but the gears are enclosed in a box on which the sieve carriage is mounted In addition to the side rocking motion, there is also a taping action. Sieve Shaker Motorized carries 7 sieves, (Approx) diameter. The sieve shaker is driven by 1/4 HP motor through reduction gearbox. Suitable for operation on 250V, 50 Hz, AC supply. Object: Coal, Mineral, Powder Radius of Gyration: 12.5mm Type: Sieve Shaker Drive: Electric

Send Inquiry
Request To Call Back
Product Image (MTCT-122)

Point Load Index Tester Hand Operated

Point Load Index Tester MTCT-122 Used for testing rock, aggregate and core samples as out crop specimen in their original shape very useful for rock classifications. This is a portable instrument and is useful in the field also uniaxial Compressive Strength for rock specimen can also be predicted approximately. The instrument comprises of a three pillar type load frame on the base of which at the center is fixed a 10 Tonne capacity hydraulic jack with a conical platen at the top of jack. The other conical platen is fixed to the top plate of the frame at its centre. The distance between two conical platen is fixed to the top plate of the frame at its center. The distance between two conical platens is adjustable by vertical movement of the upper plate of the load frame. Loading Jack with integral hand operated pump and two Pressure Gauges having graduations of 0-2500 kg x 25 kg and 0-10000Kg x 50Kg. Technical Specification of Point Load Index Tester Display Analog Material for Construction Stainless steel Power Electric

Send Inquiry
Request To Call Back
Product Image (MTFM-10)

Laminar Flow Table

TECHNICAL SPECIFICATIONS Working section and end tanks made of glass-reinforced plastic (GRP) Working section dimensions 606mm x 892mm Actual viewing area 495mm x 755mm Lower glass plate incorporates eight sinks/sources in cruciform pattern and viewing reticule A system of pipes, valves and manifolds enables any configuration of sinks and sources to be used Includes dye injection system and adjustable knife-edge weir for rapid, accurate adjustment of table flow Comprehensive instruction manual with illustrations FEATURES Detachable connections for source and sink calibration Sink control valves Pinch clip for source calibration Drain valve Adjustable weir plate Water inlet Pressure-reducing valve Source manifold Inlet control valve Inlet diffuser Note: The content of the product and specification are subject to change without prior notice for continuous improvement. Images shown are for representation purpose only. MICROTEKNIK keeps the right to modify the content in the product without prior notice.

Send Inquiry
Request To Call Back
Product Image (MTS-12032)

Snow Gauge

Electrically Heated Rain and Snow Gauge Measure the total amount of precipitation from both rainfall and snowfall with the heated tipping bucket

Send Inquiry
Request To Call Back
Product Image (JEQ-4G)

Laboratory Co2 Incubator

Inner chamber measuring 45 x 71 x 45 cm. made of stainless steel sheet. A full view inner glass door is provided along with outer double walled door provided with magnetic gasket. Inlet nozzle for Carbon Dioxide or Air mixture is also provided. Temperature range 5C above ambient to 60C ± 2C. Complete with pressure gauge, inlet/outlet of air/gas, cord plug etc. Workable on 220V AC 50Hz single phase. Optional: Air compressor Carbon Dioxide cylinder with rubber pipes

Send Inquiry
Request To Call Back
Product Image (JKA-68)

Hook And Weight

HOOK & WEIGHT Micro Teknik is manufacture, exporters & suppliers of : HOOK & WEIGHT Hook & weight : set 11 gm made of brass.

Send Inquiry
Request To Call Back
Product Image (MTS-101435)

Natural Draft Tray Dryer

Natural Draft Tray Dryer: Owing to the vast experience and knowledge of this field, we have been able to offer premium quality Natural Draft Tray Dryer to prestigious customers. These dryers are commonly used for analyzing the moisture elimination by various condition of high temperature under natural draft action. This draft action is generated by the hot stream of air. Specifications: Electric supply Provide: 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for weighing scale, 15A, three pin socket with switch for heater. Material Saw dust @ 1Kg. Support table Size: 500W x 500D x 750H in mm.

Send Inquiry
Request To Call Back
Product Image (EM-35)

Rota Rod

Rota Rod: Used for determining neuro-pixicity, muscle tone, balance and motor co-ordination in rats and mice. Digital counter to count the time of dropping of the rat. Consisting of compartments of 75mm width each with a rotating rod of 25mm diameter having speeds of 5 to 50 R.P. M. with time interval counters in each compartments:- Two Compartments Three Compartments Four Compartments Five Comparments Six Compartments

Send Inquiry
Request To Call Back
Product Image (EM-31)

Electro Convulsometer

Electro Convulsometer : Electro Convulsometer: The instrument provides 50 Hz stimulus current which can be adjusted 0.15 mA to 330 mA in discrete steps for producing minimal and supra maximal seizures required in the assaying of anti-epileptic and anti convulsant drugs. The application of stimulus current can be controlled by an electronic timer from 0.1 second to 1 second in steps of 0.1 to 3 seconds in 11 steps. An L.E.D. indicates the duration of stimulus.

Send Inquiry
Request To Call Back
Product Image (EM-28)

Analgesiometer .

TAIL FLICKER Type Analgesiometer : It is a tail flicker type analgesiometer (mark -I). It provides pain stimulus by heated Nichrome wire in a rat tail to determine analgesic effect of drugs. Complete with one spare element to work on 220V AC.

Send Inquiry
Request To Call Back
Product Image (P-T1)

Tablet Making Machine

Tablet Making Machine (Hand operated) : Useful for making tablets upto 100 mg. Size of punch & die of 9 mm. Automatic compression and ejection device has been provided, actuated by revolution of the wheel drive. Feed and removal of tablets has also been made automatic. Eccentric pressure system has been applied for easy setting of thickness and hardness of tablets. A stainless steel hopper has been given. The unit has been mounted on a mild steel fabrication. Completed with one die and punch set made of chromium steel.

Send Inquiry
Request To Call Back
Product Image (P-M3)

Membrane Filter Holder

Membrane Holder Diameter 25 / 47mm Buchner funnel of stainless steel Vacuum flask of borosilicate glass Membrane Filter Holder, With Neoprene Lid and Stopper, C-type Handle-clamp. Membrane Filter Holder, With SS Lid with vent, C-type Handle-clamp. Membrane Filter Holder, With Neoprene Lid and Stopper, and SS Duck Clamp.

Send Inquiry
Request To Call Back
Product Image (MTSG-12)

Spectrogoniometers .

  • Color:Black Grey
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:General lab equipments
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTOC-12)

Analogue Oscilloscopes Bicourbe

  • Automation Grade:Automatic
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTRT-20)

Detachable Transformer

  • Color:Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-726)

Thermo Gravimetric Analyzer (Tga)

  • Color:Silver
  • Display Type:Digital
  • Feature:Durability, Portable
  • Frequency:50 Hertz (HZ)
  • Material:Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTFG-15)

Function Generators 2 Mhz

  • Automation Grade:Automatic
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:General lab equipments
  • Voltage:220-240 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTRA-25)

Resistivity Analysis Application

  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:General lab equipments
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101440)

Swenson Walker Crystallizer

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101179)

Automobile Lab Equipment

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-101330)

Working Model of Screw Conveyor

  • Color:Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTK-4410MR)

VERIFICATION CLARKES MAXWELL RECIPROCAL THEOREM APPARATUS

Clarkes Maxwell Reciprocal Theorem Apparatus. It should consists of a mild steel beam 100cm long and 1.25cm x 4mm in cross section with graduations at every 10cm along the length. It should be supported on two knife edge supports 70cm apart with a 30cm overhang on one side.

Send Inquiry
Request To Call Back
Product Image (MT-101711)

FLOW METER DEMONSTRATION

FLOW METER DEMONSTRATION Microteknik manufactures and exports Flow Meter Demonstration unit for Engineering Training. Specification of Flow Meter Demonstration Unit In order to minimize the flow disturbance, supply of water is carried out from the supply tank consisting of glass beads. Dye injection must be used for visualizing the flow patterns through needle valves. The flow patterns quality can be improved by controlling and adjusting the dye injection rate. Experiments of Flow Meter Demonstration Demonstration of laminar and turbulent flow. Study of streamline patterns around cylinders at different Reynolds numbers. Study of open channel flows Study of flow over weirs "over shot and under shot weirs, broad and narrow crested weirs. Study of streamline patterns around airfoils with as well as without flap and several incidences. Familiarization with water flow visualization technique. Study of flow pattern around hump, disc, cuboid etc.. Electrical Supply, 240 V, single-phase, 50 Hz.

Send Inquiry
Request To Call Back
Product Image (P-C8)

Colloidal Mill

Price: 100.00 INR/Piece

Colloidal Mill: It has excellent function in superfine dispersing, emulsifying, homogenizing and complex mixing etc. After grinding, the particle size of materials processed will be reduced to 3-50 microns and the homogeneity more than 90%. It is an ideal equipment for superfine complex processing of corpuscles instead of such as homogenizer, ball grinding mill, three-roller mill, agitator etc, but is several times more efficient than those above. It may be used widely in various processing industries such as food-stuff, pharmaceutical, chemical, cosmetic, light and plastic etc. Machine to work on 220V AC 50 Hz single phase.

Send Inquiry
Request To Call Back
Product Image (JKA-60)

Time Recording Devices

Price: 9500.00 INR/Unit

Time Recording Devices (Cat No. - JKA-60) Time Recording Devices consists of following features:- Tuning fork : N-100 with stylus Time marker : electrical, double magnet, single marker

Send Inquiry
Request To Call Back
Product Image (JKA-101)

Starling Crank Myograph

  • Color:Black
  • Feature:Durability, Portable
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JKA-246A)

Four Unit Organ Bath

  • Color:Silver Black
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTK-7721EC)

ELASTICALLY COUPLED BEAM APPARATUS

Price: 1000.00 INR/Piece

Elastically Coupled Beam Apparatus, Apparatus consists of a three parallel bar suspension system with elastic beam at their upper and lower ends. The upper ends of the two outer suspension rods are tied to a vertical wooden board while central suspension rod may be tied to the center of another elastic beam supported at two outer ends only. Mild steel Apparatus to be supplied should be complete with a supporting stand and a set of weights.

Send Inquiry
Request To Call Back
Product Image (MTS-10914)

Bell Crank Lever

Bell Crank Lever Bell Crank Lever on Angle Iron Base with Weights

Send Inquiry
Request To Call Back
Product Image (JEQ-250A)

Freeze Drying Machine

  • Automation Grade:Automatic
  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:240 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (JP-5)

Automatic Teknik Vacuum Tissue Processor

  • Automation Grade:Automatic
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (EM-71)

DIGITAL CONDUCTIVITY METER

Digital Conductivity Meter Display: 3 LED Range: 0 to 1000 Mhos/cm 5 Range Accuracy: ±1% FS ±1 Digit Power Requirement: 230V AC Complete with Operation Manual & Dust Cover. Spare: Conductivity Cell 1./0.5/0.1

Send Inquiry
Request To Call Back
Product Image (MTK-735)

Battery Cells

Price: 120 INR/Piece

Battery Cells 3.7V with a capacity of 2600mAh

Send Inquiry
Request To Call Back
Product Image ( JEQ-1B)

Horizontal Autoclave

Price: 425000 INR/Piece

Autoclave Horizontal Autoclave Horizontal has developed same as autoclave vertical but in horizontal position and without steam jacket. Optional accessories : Pressure gauge. Compound gauge. Automatic low water level cut-off device. Pressure control switch.

Send Inquiry
Request To Call Back
Product Image (MTK-7458JP)

SUBMERSIBLE PUMP TEST RIG

  • Color:Grey Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (JEQ-2A)

WATER BATH .

Price: 4500.0 INR/Piece
  • Accuracy:100 %
  • Color:White Silver
  • Equipment Materials:Mild Steel
  • Frequency:50 Hertz (HZ)
  • Power Source:Electric
  • Temperature Range:ambient to 100degree C Celsius (oC)
  • Type: WATER BATH
  • Voltage:230 Volt (v)
Send Inquiry
Request To Call Back
Product Image (JEQ-4G)

Co2 Incubator 6 Cubic Feet

  • Capacity:100 Ltr
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTK-6856AL)

3 OR 4 CYLINDER FOUR STROKE PETROL ENGINE TEST RIG WITH ROPE BRAKE/ ELECTRICAL BRAKE/HYDRAULIC BRAKE/ AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER

  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (JP-5)

Digital Tissue Processor 1 Liter

  • Automation Grade:Automatic
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTK-90)

Counter, Differential, Cell

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Product Type:Counter, Differential, Cell
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (Cat No - EM-121M)

Microprocessor Karl Fischer Titrimeter

Price: 50 INR/Piece

MICROPROCESSOR KARL FISCHER TITRIMETER Display 16 x 2 Alphanumeric LCD Display Measuring range 10 ppm to 100% of moisture K. F. Dispensing Highly sensitive motorized dispensing system KF Factor In built automatic KF Titer Factor Calibration calculation facility Dispensing pump Through keyboard 24 keys soft touch, membrane type Stirrer In built magnetic stirrer with control Moisture Content Calculation (Automatic)

Send Inquiry
Request To Call Back
Product Image (EM-415)

Sonicator Bath And Ultra Sonic Cleaner

  • Capacity:8 Ltr
  • Color:Silver
  • Material:Steel
  • Operate Method:Manual
  • Type:Pharmacy Lab
  • Usage:Pharmaceutical Lab
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTK-507PM)

STUDY OF PRESSURE MEASUREMENT APPARATUS

  • Automation Grade:Automatic
  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTK-96CPP)

SINGLE STAGE CENTRIFUGAL PUMP TEST RIG

  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-212WBA)

WORK BENCH ELECTRONICS WITH INSTRUMENTS

  • Automation Grade:Automatic
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTE-773)

Universal motor

  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:380 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-101328)

Working Model of Bucket Conveyor

  • Color:White Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTE-769)

Dc dynamometer

  • Color:Blue Grey
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-729B)

Bet Surface Area and Pore Size Analyzer and High Pressure Analyzer

  • Color:White
  • Dimension (L*W*H):74 x 77 x 40 Centimeter (cm)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:Yes
  • Weight:72 Kilograms (kg)
Send Inquiry
Request To Call Back
Product Image (MTS-101431A)

Absorption Chiller

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-IT1106)

Axial-Flow Impulse Turbine

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (JEQ-4G)

Digital CO2 Incubator

  • Automation Grade:Automatic
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Product Type:Digital CO2 Incubator
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101255)

REYNOLDS APPARATUS

  • Color:White Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (JEQ-4G)

Automatic Co2 Incubator

  • Automation Grade:Automatic
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (JP-5)

Tissue Processing Unit Automatic

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (JEQ-17S)

Magnetic Stirrer Heavy Duty

MAGNETIC STIRRER HEAVY DUTY This is a compact stirring device that uses a rotating magnetic field by a permanent magnet, including variable stirring action. The magnetic field applied from below the container. PTFE rotor placed in the liquid does the stirring operation. The accessories that accompany this magnetic stirrer include speed regulator continuously variable, pilot lamp, plug-cord, heat control knob, and on-off switch. It operates on 220V AC 50Hz single phase. We make available models with or without Hot Plate: Magnetic stirrer with Hot Plate Capacity : 1, 2, 5, 10 litre

Send Inquiry
Request To Call Back
Product Image (MTIR-05A)

Ice Lined Refrigerator

  • Capacity:270 Liter/day
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Temperature Range:2 TO -8 Celsius (oC)
  • Usage:Industrial
  • Warranty:Yes
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS -506)

Jaw crusher

Price: 415000 INR/Piece
  • Automation Grade:Semi-Automatic
  • Dimension (L*W*H):1100 x 400 x 900 mm
  • Frequency:50 Hz
  • Measurement Range:Up to 100 mm feed size
  • Power Source:Electric
  • Type:Jaw crusher
  • Voltage:220-240 V
  • Weight:Approx. 150 - 300 kg
Send Inquiry
Request To Call Back
Product Image (MT-80033)

Digital Electronics Training Kit

Specification of Digital Electronics Training Kit : 1660 pt breadboard. Logic probe with LEDs. Clock generator with output frequency between 1Hz and 106 KHz. Pulse generator: low/high and high/low moves. Accessories include 2mm patch cords. Power supply: +5 VDC, +12 VDC. Digital trainer with 4-digit 7-Segment LED display.

Send Inquiry
Request To Call Back
Product Image (MTS-101180A)

Car Engine Diesel Motor Driven

Car Engine Diesel : Motor Driven Microteknik is Manufacturer, Exporter & Supplier of Motor Car Engine. (Fitted with F.H.P. 220 Volts A.C. Motor) The basic principles of operation of a car are c1eaarly demonstrated by this convenient size open construction model. The chasis is consisting of Front axle with wheels, Steering, Four cylinder Engine, Clutch, Gear Box, Differential, Rear axle with wheel brakes, Raditor, Fuel tank etc. Every part is sturdy built to ensure dependable service. Pistons of the engine move up and down, cam shaft connected by gears opens and closes the in take and exhaust valves of each cylinder in proper sequence, lamps flash to show instant firing order. Complete on 45x90 cm base and with raxine cover.

Send Inquiry
Request To Call Back
Product Image (EM-411)

Perimeter .

Perimeter Used to measure the peripheral field of vision. The apparatus comprises of a calibrated arc, revolving chart holder. The object carrier which moves over the arc, contains five colours and five apertures of different diameter, calibrated scale. At the back of the arc arrangement is provided for fixing of chart which has concentric circles corresponding to the degrees of arc. Adjustable chin rest. All fitted over a sturdy base with receptacle for keeping charts. For table top use. Completed with 100 charts.

Send Inquiry
Request To Call Back
Product Image (MTS-486)

Extractor Universal Hand

Extractor universal hand Description & Specification: Designed to extract specimens from almost every type of sampling tube and mould used in solid engineering laboratory or in the field. It can be mounted vertically or horizontally as desired. It has an unique feature that three 38 mm dia sample. Comprises of a frame designed for screw jack operation, one each of the adaptor plates and plunger adaptors for 38 mm, 75 mm, 100 mm, 150 mm diameters specimens and a stand to obtain simultaneously three 38 mm diameter samples from one 100 mm diameter sample. The adaptor plate which slides along the slotted supports can be claimed at any desired position by means of locking nuts. Besides this, the tube or mould can be held in position by raising the tube guides and held in position with locking screws. The lead screw movement can be stopped at any predetermined position by tightening the lead screw collar. Plunger adaptor for 200 mm dia samples. Adaptor plate with 200 mm dia hole and device to extract B number 38 mm dia samples.

Send Inquiry
Request To Call Back
Product Image (MTK-747P)

Process Control Trainer

This trainer is highly flexible and modular system for studying of various control loops in industrial processes viz. Feedback, Ratio, Cascade, Split Range Control. It elaborates study of Controlling Different Process Parameters viz. Flow, Level, Pressure & temperature. It has been designed to include these processes in a single structure. The system infact includes transducers, actuators, PID & computerized control with SCADA Application Software (Optional). Feedback Flow control. Feedback Level control. Feedback Pressure control. Feedback Temperature control. Cascade control (Level+Flow, Pressure+Flow) Ratio control (Flow+Flow). Split Range control.

Send Inquiry
Request To Call Back
Product Image (MTK-742)

Basic Control and Instrumentation

Basic Control and Instrumentation Frequency:50Hz Shape:Rectangular Frame Material:Steel

Send Inquiry
Request To Call Back
Product Image (MT-23076)

Steam Jet Refrigration Trainer

STEAM JET REFRIGERATION TRAINER : The Steam Jet Refrigeration System utilizes a steam ejector/eductor to create vacuum in the evaporative glass container. Student is able to visualize the inside of the evaporator to gain more understanding of the physics and thermodynamics properties of the cooling media. Two refrigeration circuits are used in the system, the first circuit is a refrigeration cycle to produce cooling effect and the second circuit (steam cycle) is generating motive steam.

Send Inquiry
Request To Call Back
Product Image (JEQ-4G)

Co2 Incubator Shaker

  • Automation Grade:Automatic
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (JDE-01A)

Ion Exchange Unit

Ion Exchange Unit Specification Softening and desalination with ion exchange Cation and anion exchangers usable separately and in combination Regeneration of ion exchangers Tank with 4 chambers for raw water, rinsing water, acid and caustic Diaphragm pump to transport raw water, rinsing water, acid and caustic Collecting tank for treated water, rinsing water, acid and caustic Continuous measurement of conductivity and flow rate Technical data Ion exchanger Material: network polymer Cation exchanger:h+ form Anion exchanger:oh- form Diaphragm pump Max. Flow rate:300ml/min Max. Head:10m Tank 4 chambers Capacity:each approx. 5l Material:pvc Collecting tank Capacity:approx. 20l Material:pvc Measuring ranges flow rate:20270ml/min conductivity:02000µS/cm 230V, 50Hz, 1 phase 230V, 60Hz, 1 phase 120V, 60Hz, 1 phase UL/CSA optional Dimensions and weight L”W”H: approx. 610x510x1010mm (experimental unit) L”W”H: approx. 350x480x310mm (tank, 4 chambers) L”W”H: approx. 440x540x230mm (collecting tank) Weight: approx. 46kg

Send Inquiry
Request To Call Back
Product Image (MT-733L)

Laboratory Steam Generator

Laboratory Steam Generator This steam generator is able to supply steam to the systems needing it. Its potentiality enables to supply steam to two systems at the same time. Technical Characteristic required: Framework of stainless steel Production:47 kg/h of steam at 4.5 bar Centrifugal pump Safety valve 3 pressure switches Pressure gauge with range of 0 to 10 bar Softener for inlet water Switchboard complying with EC standards, protection degree Dimensions:1300 x 800 x1500 mm Weight:230 kg

Send Inquiry
Request To Call Back
Product Image (MTS-728)

Multi Position Stirrers

Multi Position Stirrers Number of stirring position:9 No Volume per position:250-1000 ml Top plate dimension:25.4x25.4cm Top plate material:Glass filled resin Speed range:350-2000 rpm Plug:USB std Power:120, 60 Vac, Hz

Send Inquiry
Request To Call Back
Product Image (EM -121)

Coulometric Karl Fischer Titration System With Titration Controller and Titration Module

Coulometric Karl Fischer Titration System With Titration Controller and Titration Module Capacity:1000 mg H2O Rate:3500 mg H2O /Min Range:10 to 20 g H2O Resolution:0.1g Accuracy:±2 g Alarm:High/low set pts Display:LCD Display size (W”H):12.1x9cm Units displayed:%, PPM, g, mg Dimension (LxWxH):20.3x25.7x8.9cm Endpoint:0 to 99seconds Power:115-230 VAC Motor:0.82 hp Dimension (LxWxH):435x251x260mm Power:115-230 VAC Exterior dimension:61.5x86.9x69.9 cm Chamber dimension:54.6x64x48.3 cm Shag weight:104 Kg Power:208/240 VAC Dimensions:25cmx32.1cmx41.2cm Heating rate:3C Cooling rate:2C Lid temperature:37-110C Interfaces:USB,Ethernet Block temperature accuracy:±0.2C Power supply:230 V Power Consumption:700 Watt Temperature range:4-99 C Operating pressure:2 bar Inlet connection:inches Dimension:30.5x54.5x40cm

Send Inquiry
Request To Call Back
Product Image (MTEE-34C)

Poly-excitation dc machine

POLY-EXCITATION DC MACHINE (MOTOR + GENERATOR) 1 Poly excitation motor 1 Powder brake 1 Torque sensor 1 DC tacho generator 1 Power supply for brake 1 Display unit torque and speed 1 Power supply inductor DC machine 1 Rheostat 2 Magneto electric voltmeters 1 Magneto electric ammeter 1 AC & DC multi meter clamp Accessories: Starting rheostat Excitation rheostat (shunt) Excitation rheostat (series)

Send Inquiry
Request To Call Back
Product Image (MTS-715)

Solids Handling Study Bench

Solids Handling Study Bench Solids Handling Study Bench/ Flow Properties of Bulk Solids The flow and handling characteristics of granular materials are relevant to many process industries, particularly in the handling of powders, pellets, crystals and aggregates. The Solids Handling Bench introduces students to the behavior of granular materials Demonstration capabilities: Comminution (size reduction by milling) and batch mixing using a ball mill Batch mixing of granular material (powder to powder) using a V blender Bulk density, particle density and porosity (void age) of different granular materials Angle of repose of different granular materials and demonstration of stratification/segregation when mixed materials are poured (modeling avalanches). Effect of moisture content Flow of granular materials through circular orifices and effect of moisture content Pneumatic conveying of fine granular materials and cyclone separation Analysis of size distribution, efficiency, loading etc. using a fixed amplitude vibratory shaker with 6 sieves Shearing of the bulk solid sample by motor rotation of the shear cell Vertical loading of the sample via ring-shaped lid with weights Force sensor to measure the shear forces Vernier caliper gauge to measure the change in height and density of the bulk sample Software to record the sheer force characteristics via US Bunder Windows7 evaluation software to determine their Levant bulk solid parameters Blender: Speed Variable from 0 to 50 RPM Total volume 1.2 liters Working volume 0.35 liters Ball Mill Speed Variable from 0 to 50 RPM Total volume 3.5 liters Grinding medium Porcelain balls. 3.5 kg supplied Hele-Shaw cell Internal width 20mm Construction Clear acrylic Cylindrical hopper Construction Pyrex glass Inside diameter 99mm Parallel height 258mm Orifice diameters 5mm, 10mm, 15mm & 20mm Vibratory shaker Process timer 1 to 60 mins or continuous Vibrations per min 3000 at 50Hz, 3600 at 60Hz Sieves Construction Brass frame with Stainless steel mesh Standards BS410-1 / ISO3310-1 Mesh sizes 0.25mm, 0.355mm, 0.5mm, 0.71mm, 1mm, 2mm 5 kg digital balance for weighing samples 230V / 1ph / 50Hz @ 0.5 Amps Lxwxh: 500mm x 330mm 679mm

Send Inquiry
Request To Call Back
Product Image (MTK-744)

PRECISION MODULAR SERVO CONTROL TRAINER

PRECISION MODULAR SERVO CONTROL TRAINER THE Precision Modular Servo Workshop has been designed to give a rapid and direct path from control system design to hardware implementation. The resolution and accuracy of the system, and the consistency of its performance, makes the Precision Modular Servo Workshop ideal for serious study of digital linear servo control systems. In addition to allowing the study of digital control, the Precision Modular Servo Workshop also provides a complete introduction to servos, from fundamental studies of analog servos to full, real-time digital control. High-speed, high-resolution digital incremental feedback Real-time PID control position and velocity PID controller design Adaptive control Precision Modular Servo model identification Anti wind-up and gain scheduling design

Send Inquiry
Request To Call Back
Product Image (EM 36)

Ph- Meter

PH-METER Range : 0 to 14 u. Ph Resolution : 0.005 u. pH Display : LED

Send Inquiry
Request To Call Back
Product Image (MTS-101179 A)

Car Engine Petrol Motor Driven

Car Engine Petrol : Motor Driven Micro teknik is Manufacturer, Exporter & Supplier of Motor Car Engine. The above model fitted with F.H.P. 220 volts A.C. motor. The basic principles of operation of a four cylinder four strokes automobile engine are clearly demonstrated by this open construction model. Distributor Is connected to cam shaft and cam shaft Is connected to crank shaft by gears and the both are completely exposed. By turning a crank handle attached to one end of a crank shaft, pistons move, intake and exhaust valves open and close. 2.5 volts bulbs (above each cylinder) flashes to show proper firing order. The convenient size and ruggedly built model is mounted on a wooden base.

Send Inquiry
Request To Call Back
Product Image (MTS-467)

Extractor Frame Hydraulic

Extractor Frame Hydraulic Hand operated We are one of the leading manufacturer suppliers and exporter of Extractor Frame Hydraulic. This extractor frame is used for taking out soil samples compacted or undisturbed, from 100 mm dia and 150 mm dia cylinders such as Core Cutters, Proctor moulds, c. B. R. Moulds etc. Salient Features Specifications: It consists of a 5 Ton capacity hand operated, hydraulic jack mounted on a suitable frame. Two plungers, one for 100 mm dia and the other of 150 mm dia moulds are supplied. One thrust plate for 150 mm dia and one for 100 mm dia specimens are also supplied. Height of thrust plate is adjustable. Accessories: Set of Plungers adaptors and thrust plates for 38 mm, 50 mm and 75 mm dia specimen.

Send Inquiry
Request To Call Back
Product Image (MT-80027)

Operational Amplifier Trainer Kit

Specification of Operational Amplifier Trainer Kit : Integrated power supplies. Potentiometers used in op-amp modifications. Capacitors 102 to 107 pF. 1% load and line control. 640 pt breadboard. Power supply: 12 V, 0.5 A.

Send Inquiry
Request To Call Back
Product Image (MT-23009)

Hydrullic Trainer Setup

HYDRAULIC TRAINER SETUP This trainer is designed to meet the requirements for learning complex inner dynamic structure and working principle of hydraulic components. By using relay module, button module and PLC module, it combines the transmission technology and control technology perfectly. The structure of hydraulic component is designed according to real industrial hydraulic component, which is light in weight and small in size. Due to this, students can start or stop experiment in a short time. All the hydraulic components are equipped with quick installing baseboard and quick connecting joint to ensure convenient operation. By using double-locking quick connecting tube, students can replace an oil tube in 6 seconds without leakage. The PLC module and electrical control module are modular designed to avoid cross interference of electrical circuit when doing experiment. Safety protections: grounded, lead protection, safety in accordance with related BS standards. Insulated safety sockets, sheathed cables and wires. EXPERIMENTS Reversing loop of reversing valve. Lockout loop of hydraulic controlled one-way valve. Pressure setting loop. Two-stage pressure loop. Hydraulic loop of reducing valve. Pressure boosting loop of pressure cylinder. Unloaded loop of reversing valve. Oil in throttle speed regulating loop. Oil return throttle speed regulating loop. Flow valve short connected speed changing-over loop. Secondary feeding loop. Sequential action loop of sequence valve. Sequential action loop of pressure relay. Sequential action loop of electrical travel switch.

Send Inquiry
Request To Call Back
Product Image ( EM-57P)

Digital Auto Colorimeter Analyzer

DIGITAL AUTO COLORIMETER ANALYZER

Send Inquiry
Request To Call Back
Product Image (Cat No. - EM-3671)

Digital PH Conductivity

Digital Ph - Conductivity & Temp. Meter Digital Display-3 Digit Led. Power-220V Ac ± 10% 50Hz. Parameters Ph Range-0-14Ph. Resolution-0.01Ph. Accuracy-± 0.02 Ph ±1 Digit. Input Impedance->1012 Ohms. Temperature Co.-0-100 C (Manual). Slope Correction-80 To 120%. Conductivity Range-0 To 20Ms/Cm In 5. Resolution-0.1 Micro Mhos/Cm. Temperature Comp.-0 To 50C Manual. Temperature Range-0 To 100 C. Display-3 Digit Led Display.

Send Inquiry
Request To Call Back
Product Image ((Cat No. - EM-206))

Water and Soil Analysis Kit

Water & Soil Analysis Kit (Cat No. - EM-206) DIGITAL WATER & SOIL ANALYSIS KIT. Display 3 Digit LCD. Range To Measure 6 Parameter; Ph, ORP, Conductivity, TDS, Do Temperature. GOOD PACKING BEST FINISHING BEST MATERIAL BEST PRICE OF SCIENTIFIC EQUIPMENTS

Send Inquiry
Request To Call Back
Product Image (EM-309)

Hemogram Meter

HEMOGRAM METER

Send Inquiry
Request To Call Back
Product Image (EM-121)

Digital Auto Karl Fischer Titiri Meter

Digital Auto Karl Fischer Titiri Meter (Cat No. - EM-121) Digital Auto Karl Fischer Titiri Meter has following features : Auto titration control Separate control & titration units Auto zero burette Adjustable timer Visual & audible alarm Specifications : Control unit Display : Array of 10 leds Timer : Adjustable timer Buzzer : Yes Sample size : 1-50 mg of water K.F. Dispensing resolution : 0. 05 ml Measuring electrode : dual platinum Indication : run, add and display in auto mode end Detection : Current sensing by electronic control Dimensions : l340xb250xh125 mm (approx.) Weight : 2 kg. (approx. )Compressor unit Titration cell : air tight 200 ml. Stirrer : variable speed magnetic stirrer with on/off control K.F. Flow : automatic sensitive control valve for KF reagent Burette : pressure filling auto zero burette with 0.05ml resolution Power : 230 v,š± 10 V , 50 Hz Accessories :- Burette (clear glass) 10ml Reservoir bottle 500 ml Moisture trap with rubber bellow for air pumping Titration cell Dual platinum electrode Solenoid valve assembly Magnetic capsule Set of 2 clamps Rubber tubing Nozzle Instruction manual Instrument with Na & K Filters instruction Manual Dust Cover Chimney Air and Gas Tubing Along with Clamp

Send Inquiry
Request To Call Back
Product Image ( P-T1C)

Tablet Making Machine Motorised

Tablet Making Machine (Motorised) : Hammer type and provided with suitable motor, workable on 220V AC 50Hzsingle phase. Optional : Spare punch & die of chrome steel of 6, 9 & 12mm Note : Ask for rotary tablet machine.

Send Inquiry
Request To Call Back
Product Image (EM-38)

Stimulator .

Stimulator Stimulator (Student type) : 0.25 pulse per second to 200 pulse per second in 11 steps. Pulse width selectable 1ms and 2 ms. Operable on 30V. Modes: Internal pulse mode External pulse mode Single pulse mode Stimulators (senior type): Model : EM-38(A) 1 pulse per second to 10 pulse per second in 10 steps multiple of 0.1, 1 and 10. Continuous variable volt from 0-3V in multiple of 1 and 10. Internal pulse, external pulse and single pulse mode.

Send Inquiry
Request To Call Back
Product Image (MTS-409)

Table mounted Specific Gravity Density Apparatus

Specific Gravity (Density) Apparatus We are offering Specific Gravity (Density) Apparatus, which is useful in the determination of specific gravity of a test liquid by the falling-drop method is described. This feature enables the initial fluid column to be conveniently repetitively used for specific gravity determinations. Specific Gravity (Density) apparatus, Buoyancy Balance. Consists of a rigid support frame, incorporating a water tank mounted on a platform. A mechanical lifting device is used to raise the water tank through the frame height immersing the specimen suspended below the balance. The Electronic Digital Balance 10 kg x 0.5 gram supplied with frame, water tank, suspension hook, Wire basket 200x200 mm.

Send Inquiry
Request To Call Back
Product Image (EM -142IN)

table mounted Uv Visible Spectrophotometer

Uv Visible Spectrophotometer Interferometer: Michelson interferometer (30 incident angle) Equipped with dynamic alignment system (JPN patent No.2115670 No.3613171) Sealed interferometer with auto dryer (JPN registration of utility model No.3116465) Optical system: Single-beam optics Beam splitter: Germanium-coated KBr Light source: High-energy ceramic light source Detector: DLATGS detector equipped with temperature control mechanism Wave number range:7,800 to 350 cm-1 Resolution:0.5, 1, 2, 4, 8, or 16 cm-1 S/N ratio:30,000:1 or higher (peak-to-peak, 4 cm-1 resolution, in a Neighborhood of 2,100 cm-1, 1-minute accumulation) S/N ratio:30,000:1 or higher (peak-to-peak, 4 cm-1 resolution, in a Neighborhood of 2,100 cm-1, 1-minute accumulation) Mirror speed:4-step selection of 2.0, 2.8, 5, or 9 mm/sec Data sampling: He-Ne laser Gain: Automatic or manual setting (x1 to x128) Sample compartment: Equipped with automatic accessory recognition mechanism 200) x 230 (D) x 170 (H) mm Center focus Dimensions:514 (W) x 606 (D) x 273 (H) mm Weight:35 kg

Send Inquiry
Request To Call Back
Product Image (MTRT-20A)

Plug-in Transformer

Removable Transformer Core section 30 x 30 mm Coils protected by a plastic housing Safety banana sockets 4 mm Number of turns: 300 Spiers Inductance: 2.5 mH- Resistance: 1.2- Max.ï Current: 5A Removable Transformer (MTRT-20B) Core section 30 x 30 mm Coils protected by a plastic housing Safety banana sockets 4 mm Number of turns: 600 Spins Inductance: 10 Mh Resistance: 3 Max. Current: 2A Removable Transformer (MTRT-20C) Core section 30 x 30 mm Coils protected by a plastic housing Safety banana sockets 4 mm Number of turns: 1200 Spiers Inductance: 12 mH Resistance: 3 Max. Current: 1A

Send Inquiry
Request To Call Back
Product Image (MTS-101432)

Absorption In Wetted Wall Column

Absorption in Wetted Wall Column: Micro Teknik Heat and mass transfer during the process in a wetted wall column can be demonstrated and studied by this set-up. The major parts of this set-up comprises: Glass column Feed tank Air regulator with pressure gauge Rotameter Receiving tray and piping Disturbance in metered quantity of fluid and walls of column occurs from the top, as metered hot air flow is passed through the wetted wall column vertically upwards and evaporation in the liquid film around the wall occurs. Different conditions can be stimulated by varied flow rates of water and air. Experiments Determination of the gas film coefficient in a wetted wall column making use of air water system. Finding the mass transfer coefficient Features Well Painted structure Simple operation and maintenance Compact and standalone set-up Utilities needed Water supply and drain 1Phase, 220 V AC, 0.5 kW is electricity supply

Send Inquiry
Request To Call Back
Product Image (MTLD-23)

Led Demonstration Wavewich

Led Demonstration Wavewich Makes it easy to visualize the influence of frequency on the speed of a wave on the surface of the water Fast installation (less than 10 minutes) large display screen Easy position Analysis of the frequency of excitation on Banana sockets 4 mm Equipped with an LED strobe and an independent wave generator It also has a pulsed air excitation system. This allows for figures of a very good quality Single and double plane and circular waves are generated by 3 types of tips. Accessories supplied: 3 tips (single, double and flat wave) 1 set of 7 accessories: trapezoid, biconcave, biconvex, parallel faces. Technical characteristics Frequency: in synchronous or asynchronous mode. Adjustable from 1 to 60 Hz. Adjustable amplitude. Analog output of excitation on banana sockets. 12V / 1A continuous power supply. 3W LED strobe. Dim. tank (L x W x H): 330 x 500 x 330 mm. Dim. of the display screen: 400 x 330 mm.

Send Inquiry
Request To Call Back
Product Image (MTK-8442VB)

VARIABLE SPEED CENTRIFUGAL PUMP TEST

  • Automation Grade:Automatic
  • Color:Blue White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (EM-350)

Tissue Embedding Center with Cold Plate

A modular unit with separate cold storage unit. An integrated Para Trimmer with improved profile for optimum wax flow from surface. Cold plate temperature control adjustable and between -12C to 3C (tolerance +/- 1C). It long & short nozzle design. A higher temperature mould storage area 60C to prevent moulds sticking together. The Embedder has a thicker heater plate for minimal wax build up. Flat work surfaces for maximum working area. Electrically heated forceps optional. Paraffin wax tank: 5 litres. User-adjustable lighting levels provided. Independently controlled lighting provided. Tissue Storage tank large to hold all tissue baskets. Cold Plate hold at least 72 Standard base molds. Mold storage holds at least 300 standard base molds. Paraffin Drain Valves to drain waste wax and tissue tank present. Adjustable paraffin dispensing paddle to handle any size cassette provided. Thermally insulated work contact surfaces provided. Multilingual touch screen controls provided.

Send Inquiry
Request To Call Back
Product Image (MTK-8051A)

Autopsy saw with dust collector

Price: 1000.0 INR/Piece
  • Accuracy:100 %
  • Application:General lab equipment
  • Feature:Highly Efficient
  • Frequency:50 Hz AC Hertz (HZ)
  • Power Source:Electric
  • Type:Autopsy saw with dust collector
  • Usage:General lab equipment
  • Voltage:230 Volts Volt (v)
  • Delivery Time:2 Week
  • Supply Ability:150 Per Month
Send Inquiry
Request To Call Back
Product Image ( JEQ-4(P))

ENVIRONMENTAL SHAKER INCUBATOR

  • Color:White Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JEQ-4C)

B O D Incubator

  • Color:White Green
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image ( JST-3)

Plant Growth Chamber

Price: 19500 INR/Piece

Plant Growth Chamber is a useful to conduct experiments on plant growth in certain controlled environmental conditions. Double walled construction, inner made of anodized aluminum or stainless steel sheet and outer made of mild steel sheet duly finished in powder coated. In addition to a double walled outer door. A full-view clear acrylic door has been provided for inspection of material without disturbing chamber conditions. Three perforated adjustable shelves are provided. Temperature range from 5 C to 50 C ï 2 C is controlled by a Digital Temperature Controller and Indicator. Heating is achieved by insulated elements and cooling by a sealed compressor unit. Inner cyclic illumination is controlled by a 0-24 hrs. Timer and light intensity by a controller. Humidity created in a stainless steel chamber heated by an immersion heater below the chamber, from ambient to 95% ï 3% RH and is controlled by a humidistat. Chamber sizes available:- Size (W x H x D) Capacity 570 x 875 x 550 mms 10 cu ft. 775 x 900 x 775 mms 20 cu ft. 825 x 1200 x 825 mms 30 cu ft. 900 x 1720 x 800 mms 45 cu ft.

Send Inquiry
Request To Call Back
Product Image (JKA-31)

Student Electrical Kymographs

  • Color:White Black
  • Dimension (L*W*H):0.25-600 Millimeter (mm)
  • Frequency:50 Hertz (HZ)
  • Power:220 Volt (v)
  • Power Source:Electric
  • Usage:Laboratory, Pharmacy Lab
  • Voltage:12 Volt (v)
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (EM-24)

Pole Climbing Apparatus

  • Color:Black White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Pharmaceutical Lab Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image ((Cat No. - JKA-67))

Simple Electrode

Simple Electrode (Cat No. - JKA-67) Simple Electrode : made from clear acrylic sheet with two copper wire.

Send Inquiry
Request To Call Back
Product Image ( JKA-8)

12w Student Nerve Muscle Assembly

Price: 12000 INR/Unit

Student Nerve-muscle Assembly (Cat No. - JKA-8) Student Nerve-Muscle Assembly : Useful for Neuro-Muscular experiments. Choice can be made out of the sets offered below : Accessories set I :- Dubois Raymond Induction Coil-1 Power supply for Induction Coil-1 Drum paper Clips-2 Crank Mygrograph-1 Nerve Muscle Chamber-1 Starling Heart Lever-1 Adjustable Stand-1 Standard X-blocks-2 Open sided X-block-1 N-100 Tuning fork-1 Dubois Raymond key-1 Press Contact key-1 Simple electrode-1 Hook & Weight set 110 gm-1 Hook & Weight set of 11 gm- Muscle grip-1 Frog Heart clips-2 15 cm Capillary lever with writing Point-3 Accessories Set II :- Solid State Stimulator-1 Power supply for above-1 Drum paper Clips-2 Crank Mygrograph-1 Nerve Muscle Chamber-1 Starling Heart Lever-1 Adjustable Stand-1 Standard X-blocks-2 Open sided X-block-1 N-100 Tuning fork-1 Dubois Raymond key-1 Press Contact key-1 Simple electrode-1 Hook & Weight set 110 gm-1 Hook & Weight set of 11 gm-1 Frog Heart clips-2 15 cm Capillary lever with writing Point-3

Send Inquiry
Request To Call Back
Product Image (JKA-49)

Long Paper Extension

Price: 14500 INR/Unit

Long Paper Extension Long Paper Extension : Can take paper upto 2 meters length and consists of a bar upon which one 6" x 3"cylinder slides. The forked arm is only to be slided over the drum leg to fix it in position. To achieve accurate alignment with drum leveling screws are provided.

Send Inquiry
Request To Call Back
Product Image (JKA-170)

Rat Operating Table

Price: 100000 INR/Unit

Rat Operating Table (Cat No. - JKA-170) Rat Operating Table has a unique feature with top adjustable for inclination on stand.

Send Inquiry
Request To Call Back
Product Image (JKA-231D)

Organ Jar Bath Digital

  • Color:Grey
  • Display Type:Digital
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power:220 Volt (v)
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JKA-162)

Operating Table

  • Color:Silver Black
  • Dimension (L*W*H):125 x 48 Centimeter (cm)
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Patient Purpose
  • Warranty:1 Year
  • Weight:20-50 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JKA-281)

Induction Coil

Price: 1500 INR/Unit

Induction Coil (Cat No. - JKA-281) Induction Coil / Interrupters/ DU-BOIS Raymond induction coil : On a teak wood base with graduated scale. Primary coil with 300 turns and Secondary with 7500 tuns with Helmholtz modification of neefs hammer and heavy duty platinum contacts. Student Induction Coil : On a teak wood base with graduated scale. Primary coil with 300 turns and secondary with 6500 turns. Interrupter working directly off the iron core. Complete with heavy duty contacts.

Send Inquiry
Request To Call Back
Product Image (JKA-316)

Skin Fold Caliper

  • Accuracy:99.00 %
  • Color:Silver
  • Display Type:Analog
  • Material:Mild Steel
  • Power Source:Manual
  • Product Type:Skin Fold Caliper
  • Usage:Size and Pressure
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JKA-247)

Lagendroff Assembly

  • Color:Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power:220 Volt (v)
  • Power Source:Electric
  • Usage:Laboratory
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JKA-317)

Macerator .

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTK-3028A)

Arbitrary Function Generator for Engineering Electronic Instruments

Arbitrary Function Generator Specification: Frequency Range:0.2 Hz to 2 MHZ Wave forms:Sine, Square, Triangle,Ramp, Pulse and etc., Impedance:50 ï10% Amplitude:20Vp-p (1M load); 10vpp (50 load) Attenuation:0/20/40/60db Distortion factor:20 Hz " 20 KHZ 1% Square wave, Rise or fall time: 30 ns Power source:220-240VAC ï10%. 60Hz/50Hz

Send Inquiry
Request To Call Back
Product Image (JTL-01)

Thin Layer Chromatography Apparatus

Price: 2000.0 INR/Set
  • Accuracy:100 %
  • Color:Multicolor
  • Equipment Materials:Aluminium, Plastic, Wooden
  • Material:Aluminium, Plastic, Wooden
  • Model No:JTL-01
  • Product Type:Thin Layer Chromatography Apparatus
  • Type:Thin Layer Chromatography Apparatus
  • Usage:Laboratory Equipment
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JEQ-21)

Melting Point Apparatus

Price: 2000.0 INR/Piece
  • Accuracy:100 %
  • Color:Grey Blue
  • Display Type:Analog
  • Equipment Materials:Mild Steel
  • Feature:Highly Efficient
  • Material:Mild Steel
  • Product Type:Melting Point Apparatus
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JEQ-21D)

Precision Digital Melting Point Apparatus

Price: 2000.0 INR/Piece
  • Accuracy:100 %
  • Display Type:3 Digit LED Digital display
  • Equipment Materials:Mild Steel
  • Feature:Built-in magnetic stirrer with electronic speed controller.
  • Power Source:Electric
  • Product Type:Precision Digital Melting Point Apparatus
  • Usage:General Lab Equipments
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTKT-35)

Electronic Kundt Tube

Price: 5000.0 INR/Piece
  • Accuracy:100 %
  • Color:Black
  • Equipment Materials:Mild Steel, Glass
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel, Glass
  • Product Type:Electronic Kundt Tube
  • Type:Electronic Kundt Tube
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (Teknik)

Blood Group Determination Kit

Price: 2000.0 INR/Piece
  • Accuracy:100 %
  • Color:Silver Green
  • Feature:used to identify an individual's blood group
  • Power Source:Manual
  • Product Type:Blood Group Determination Kit
  • Type:Blood Group Determination Kit
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-801N)

Vincilab Interface .

Price: 2000.0 INR/Set
  • Accuracy:100 %
  • Display Type:Touch screen
  • Feature:Highly Efficent
  • Power Source:Electric
  • Product Type:Vincilab Interface
  • Type:Vincilab Interface
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTE-HM54)

Heating Magnetic Stirrer

Price: 2000.0 INR/Piece
  • Application:General Lab Equipments
  • Dimension (L*W*H):280 x 160 x 85 Millimeter (mm)
  • Frequency:50 Hertz (HZ)
  • Power Source:Electric
  • Product Type:Heating Magnetic Stirrer
  • Type:Heating Magnetic Stirrer
  • Voltage:200 - 240 Volt (v)
  • Warranty:1 year
Send Inquiry
Request To Call Back
Product Image (MTEE-15)

PROTECTED LED .

Price: 100.0 INR/Piece

PROTECTED LED Red LED LED in series with a protection resistor Rugged in unbreakable polycarbonate Convenient support housing The safety banana cords are connected to the side of the housing, allowing the front of the cords to be removed for a better fit readability of the fixtures. Dimensions: 100 x 70 x 33 mm.

Send Inquiry
Request To Call Back
Product Image (MTS-431)

CBR Accessories

Price: 500.0 INR/Set
  • Accuracy:100 %
  • Automation Grade:Manual
  • Classification:Geotechnical Tools
  • Equipment Materials:Mild Steel / Stainless Steel
  • Material:Stainless Steel
  • Measurement Range:Standard CBR
  • Power Source:Manual
  • Type:Soil Testing Equipment
Send Inquiry
Request To Call Back
Product Image (MTS -495)

Flash point

Price: 3000.0 INR/Piece
  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-801E)

Electrocardiogram . .

Price: 5000.0 INR/Unit

Electrocardiogram Range:0 to 5 Mv Resolution:1.2 V

Send Inquiry
Request To Call Back
Product Image (MT-813U)

Ultrasound Telemeter .

Price: 1000.0 INR/Piece
  • Accuracy:100 %
  • Application:General Lab Equipments
  • Display Type:LCD Display
  • Feature:Highly Efficient
  • Material:Plastic
  • Product Type:Ultrasound Telemeter
  • Usage:General lab Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTBS-25)

BOSSOLE 3D .

Price: 500.0 INR/Piece

BOSSOLE 3D Lot of 10 Exploration of magnetic fields in all directions Use placed on the table or held by hand Dimensions: 80 x 5 x 27 mm

Send Inquiry
Request To Call Back
Product Image (MTSM-20)

3d Giant Magnetic Spectators

Price: 500.0 INR/Piece

3D GIANT MAGNETIC SPECTATORS Set of 2 Simultaneous comparison of 2 types of magnetic fields Two highly visual demonstration devices, allowing to compare the magnetic spectra of a right magnet and a U-shaped magnet. Technical characteristics- Dimensions model Magnet U : 175 x 220 x 205 mm, Right magnet: 175 x 205 mm. Set of 2 models.- With magnets.

Send Inquiry
Request To Call Back
Product Image (MTBD-20)

Pair of 440 Hz Diapasons on Board of Resonance

Price: 500.0 INR/Piece

Pair of 440 Hz Diapasons on Board of Resonance For the study of sound and beat phenomena. Composition: tuning forks 440 Hz Length 170 mm 2 sound boxes in wood, 174 x 97 x 53 mm, 1 mass slide 1 hammer.

Send Inquiry
Request To Call Back
Product Image (MTPM-36)

Projectable Magnetic Circuits

Price: 500.0 INR/Set

Projectable Magnetic Circuits Set of 4 circuits Composition- 1 - Circular- 2 - Rectilinear- 3 - Frame- 4 - Solenoid.

Send Inquiry
Request To Call Back
Product Image (MT-171C)

LAB Conductometer

Price: 10.0 INR/Piece
  • Automation Grade:Manual
  • Dimension (L*W*H):250 mm x 180 mm x 70 mm
  • Measurement Range:0.01 S/cm to 200 mS/cm
  • Model No:LAB-CON01
  • Power Source:220V AC Mains
  • Type:Conductometer
  • Voltage:220V
  • Weight:Approx. 1 Kg
Send Inquiry
Request To Call Back
Product Image (MTSC-13)

Student Sleep Chamber

Price: 5000.0 INR/Piece

Student Sleep Chamber No noise in the classroom, even when 8 experiments are running simultaneously Measurement of the sound intensity level using a sound level meter Study of the sound attenuation obtained with different materials Checking the decay of the sound acoustic intensity according to the distance This briefcase, lined with sound insulation, allows to confinate the sound and to have the students perform experiments on the sound at the same time. The sound source integrated into the case, a stand-alone buzzer on a battery, is equipped with a detector that can cut the generation of sound when opening the case. Cela avoids disturbing the experiences of other students when opening the case to study the sound attenuation of another material. Two wall passages allow introducing the microphone of the sound level meter in the room deaf. The case is delivered with a set of screens of different materials and thicknesses to compare their absorbency. With pupil sound meter Range of measurement: 30 to 100 dB and 60 to 130 dB. Functions: dBA (response curve of the human ear), maintenance of the maximum value, selection of the integration time (fast or slow). Technical : Accuracy: ± 3.5 Db Power supply: Battery 9 V 6F22 (not supplied) Dimensions: 150 x 55 x 32 mm Weight: 230 g.

Send Inquiry
Request To Call Back
Product Image (MTSC-112)

Doppler Effect and Speed Monitor Bench

Price: 500.0 INR/Set

Doppler Effect and Speed Monitor Bench Measurement of the speed of sound. Measurement of the constant speed of a mobile by Doppler Effect. Recording and signal processing thanks to the stereo sound card of your computer and the downloadable Audacity free software Perfectly uniform movement A mobile equipped with a 4080 Hz frequency sound source powered by a 12 V battery, is launched. At a constant speed thanks to an elastic band on a 1.5 meter bench. Two protected microphones are connected in stereo to a 3.5 mm jack socket. The first microphone is positioned at the beginning of the course and the second at the end. The distance between the two microphones is adjustable and measurable precisely thanks to the millimeter scale on the bench. The signals of the two microphones are recorded and processed. Thanks to the stereo sound card of your computer and the free Audacity software, without an Ex AO system.

Send Inquiry
Request To Call Back
Product Image (MTDA-32)

Demonstration Alternator .

Price: 500.0 INR/Piece

Demonstration Alternator Coil rotated by a crank in front of a magnet. Measured voltage measured and visualized on sockets 4 mm. Dimensions (W x D x H): 300 x 200 x 230 mm.

Send Inquiry
Request To Call Back
Product Image (MTTR-30)

Transmitter-usb Receiver .

Price: 10.0 INR/Piece

Transmitter-usb Receiver Box with a transmitter and an ultrasonic receiver (40 kHz) side-by-side and aligned on the same axis. The transmitter emit in continuous mode or in long bursts or short bursts. Transmitted and received signals are accessible via 2 BNC sockets. Dimensions: 70 x 115 x 135 mm. Power supply: 12 V - 1500 mA (by AC adapter supplied).

Send Inquiry
Request To Call Back
Product Image (MTE-CP5)

Caps . .

Price: 100.0 INR/Bag

Caps Rubber stoppers Size:00Small Ë: 11mm Large Ë:15mm Height:21mm Small Ë:13mm Wide Ë:17mm Height:24mm Small Ë:14mm Large Ë:19mm Height:26mm Little Ë:15mm Large Ë :20mm Height:26mm Size Ë:17mm Large Ë:23mm Height:26mm Size Ë:19mm Large Ë:26mm Height:28mm Size Ë:22mm Large Ë:29mm Height:28mm Small Ë:25mm Large Ë:33mm Height:28mm Small Ë:28mm Large Ë: 37mm Height:30mm Small Ë: 32mm Large Ë: 42mm Height:30mm Size Ë:37mm Large Ë:45mm Height:30mm Size Ë:41mm Large Ë:50mm Height:32mm

Send Inquiry
Request To Call Back
Product Image (MT-807A)

Thermometer and Thermocouple .

Price: 500.0 INR/Piece
  • Accuracy:100 %
  • Display Type:LCD Display
  • Feature:Highlt Efficient
  • Material:Plastic
  • Power Source:Battery
  • Product Type:Thermometer and Thermocouple
  • Usage:General Lab Equipments
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-904F)

Cage of Faraday .

Price: 500.0 INR/Pack
  • Accuracy:100 %
  • Application:General Lab Equipments
  • Equipment Materials:Stainless Steel
  • Feature:Highly Efficient
  • Material:Stainless Steel
  • Product Type:Cage of Faraday
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTE-PA6)

Perce Caps Apparatus .

Price: 500.0 INR/Piece
  • Accuracy:100 %
  • Equipment Materials:Stainless Steel
  • Feature:Highly Efficient
  • Material:Stainless Steel
  • Power Source:Manual
  • Product Type:Perce Caps Apparatus
  • Type:Perce Caps Apparatus
  • Usage:Industrial
Send Inquiry
Request To Call Back
Product Image (MTDS-25)

Demonstration Spring .

Price: 100.0 INR/Piece
  • Accuracy:100 %
  • Color:Silver
  • Equipment Materials:Stainless Steel
  • Feature:Highly Efficient
  • Power Source:Manual
  • Product Type:Demonstration Spring
  • Type:Demonstration Spring
  • Usage:Industrial
Send Inquiry
Request To Call Back
Product Image (MTTC-32)

Thermal Conduction Bars

Price: 500.0 INR/Piece
  • Accuracy:100 %
  • Color:Blue
  • Dimension (L*W*H):180 x 80 Millimeter (mm)
  • Equipment Materials:Aluminum, Copper, Iron and Glass
  • Feature:Durability, Portable
  • Material:Aluminum, Copper, Iron and Glass
  • Product Type:Thermal Conduction Bars
  • Type:Thermal Conduction Bars
Send Inquiry
Request To Call Back
Product Image (MT-80042)

Frequency Meter .

Price: 5000.0 INR/Piece
  • Accuracy:100 %
  • Color:White
  • Equipment Materials:Mild Stee
  • Feature:Highly Efficient
  • Material:Mild Steel
  • Product Type:Frequency Meter
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-819C)

COULOMBMETER . .

Price: 1000.0 INR/Set
  • Accuracy:100 %
  • Color:Black
  • Equipment Materials:Mild Steel
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Type:COULOMBMETER
  • Voltage:100 Volt (v)
Send Inquiry
Request To Call Back
Product Image (MT-779)

Squirrel cage 3- induction machines

  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-10941)

Screw Jack

  • Color:Silver
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Lab Equipments
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101082)

Girder Models Wooden

Girder Models (Wooden) : Microteknik is manufacturer, exporter & supplier of Girder Models (Wooden) Properly constructed in wood (a) Plate Girder, (b) Box Girder, (c) N. Girder.

Send Inquiry
Request To Call Back
Product Image (MTEE-9)

FUSE ON SUPPORT

Price: 100.0 INR/Set

FUSE ON SUPPORT Robust in unbreakable polycarbonate Housing perfectly transparent support for a better visibility of the components The connections of the banana cords of safety are made on the side of the case which makes it possible to release the facade of the cords and to ensure a better legibility of the montages. Test Robustness: supports a load of 100 kg Dimensions: 100 x 70 x 33 mm. Fuse holder: ‹“ 5 mm x 20 mm. With fuse protected by a removable cover.

Send Inquiry
Request To Call Back
Product Image (JEQ-20)

Vortex Mixer .

Price: 1500.0 INR/Piece

Vortex Mixer Adjustable speed, Vortex genie short, rapid, eccentric stroke motor ribin neoprene cup imparts vigorous agitation to tubes. With speed control indicator and on-off switch. CODE: JEQ-20V Functional description: Used to mix test tubes containing reagents Technical: Outer Powder coated Neoprene rubber Stirring speed: 100 to 2500 rpm Central support diameter: 4.2 mm Tube diameter up to 30 mm Continuous or touch mode operation Timer: 1 to 60 sec Supplied with suitable surge protection equipment.

Send Inquiry
Request To Call Back
Product Image (MTE-HC86)

Hand Centrifuge .

Price: 500.0 INR/Piece

Hand Centrifuge Attachment to bench or table edge Crank drive Holds 4 x 15 ml tubes Comes with 4 tube holders CODE: MTH-17M Functional description: Hand-operated apparatus used for rapid rotation to separate two substances of different densities. Technical: Manual powered, no electric power necessary Portable and compact Self lubricating gear Maintenance free Rotor of 4 conical 15 ml tubes Acceleration up to 1,300 rcf Speed up to 3000 rpm Accessories: 1 spare rotor

Send Inquiry
Request To Call Back
Product Image (MTEE-27)

SOLAR CELL .

Price: 1000.0 INR/Set

OLAR CELL Robust unbreakable polycarbonate. Perfectly transparent support box for better visibility of components. The connections of the banana safety cords are made on the side of the case which allows to free the front of the cords and to ensure a better readability of the mounts. Robustness: supports a load of 100 kg. Dimensions: 100 x 70 x 33 mm.

Send Inquiry
Request To Call Back
Product Image (MTS-10950)

Compression and Extension of Springs Apparatus

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (JST-4)

Seed Dryer Cabinet

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Aluminium, Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JKA-211D)

Digital Respinometer

  • Color:White, Grey
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-11062)

Structural Lab Equipment

  • Color:White Blue
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTDP-20)

Floating Material in Dry Powder

Price: 10.0 INR/Kilograms
  • Accuracy:100 %
  • Application:General Lab Equipments
  • Color:Grey
  • Equipment Materials:Dry Powder
  • Material:Dry Powder
  • Product Type:Floating Material in Dry Powder
  • Type:Floating Material in Dry Powder
  • Weight:50 Grams (g)
Send Inquiry
Request To Call Back
Product Image (MT-814S)

Sonometer . .

Price: 500.0 INR/Piece

Sonometer Range : -45 to 45 Pa Resolution : 22 mPa

Send Inquiry
Request To Call Back
Product Image (MTTV-90)

Fully Transparent Calorimeter

Price: 500.0 INR/Piece

Fully Transparent Calorimeter Excellent double-wall insulation Unbreakable poly carbonate Perfect visibility of the inside of the calorimeter Magnetic stirring option for more precision Double-walled calorimeter with lid fitted with spiral plunging resistor, manual stirrer and a passage for thermometer.Parfaite transparency. Observation of the melting of the ice cube. The bottom is nest able on the magnetic stirrer. The magnetic stirring option allows to homogenize the studied system and to considerably improve the measurement accuracy. Internal cavity consisting of a 250 mL low form beaker guaranteeing chemical resistance to all common chemicals. Technical characteristics- Thermal capacity: 40 JK-1- Cover Transparent unbreakable polycarbonate Plunging resistors connected to sockets 4 mm, 2 x 2.5 Removable manual shaker Thermometer passage 2.5 to 6 mm.

Send Inquiry
Request To Call Back
Product Image (MTOB-26)

Optical Bench .

Price: 500.0 INR/Piece

Optical Bench Models: 2 meters. Powerful LED light source. Excellent retention and alignment of optical elements. Aluminum rail. Open-day experience Lenses or objects 50 mm are held in the lens holder at using a screwed ring to ensure precise positioning and avoid any risk of escape and therefore breakage. Features Rail: 2 m graduated in mm. Optical source: A cold LED with stand. On condenser, mains adapter supply. Jumper: 8. Lens holder: 4. Diaphragms: 3, 5 and 8 mm. Lenses: F -100, -50, 50, 100, 200, 500 mm. Letter F: 1. Screens: 1 white and 1 frosted. Prism: 1 prism and 1 prism holder. Mirrors: Concave, convex and plane

Send Inquiry
Request To Call Back
Product Image (MTLO-25)

Laser Optics Box 5 Beams

Price: 1000.0 INR/Piece

Complete with 1 laser 5 beams Very visual in daylight thanks to the laser multibeam Size suitable for experiments raises on the table Many possible experiments by combining the optical components Red laser with switch to generate 1, 3 or 5 rigorously parallel beams. Horizontal use with supplied plexiglass optics accessories. Composition: 1 Laser class II (1 mW): 1, 3 or 5 beams powered by 1 x 6.3 V mains adapter 1 mat with graduated disc in degree and ruler in mm, 210 x 380 mm 1 graduated disc150 mm, 1 rectangle prism 1 flexible mirror (flat, concave or convex), 1 parallel-faced plate 1 hemicylindrical lens 1 biconvex lens 1 biconcave lens 1 hemicylindrical tank 1 trapeze Supplied in an aluminum storage case Dimensions: 280 x 70 x 240 mm.

Send Inquiry
Request To Call Back
Product Image (MTS-101027)

White Blue Scotch Yoke Mechanism

  • Color:White Blue
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTCS-22 )

Color Synthesizer .

Price: 5000.0 INR/Piece

Color Synthesizer Multiply light combinations in the day time Three adjustment knobs allow to adjust, independently of each other, the luminous intensity of the colors blue, green and red and to achieve precisely the synthesis of colors. Button on / off. Technical details: Power supply: 3 x AAA batteries (supplied), 4.5 V. Dimensions (W x D x H): 80 x 125 x 110 mm. Weight: 400 g.

Send Inquiry
Request To Call Back
Product Image (MTS-10960)

Kater's Reversible Pendulum

  • Color:Grey
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
Send Inquiry
Request To Call Back
Product Image ( JKA-312)

Compass Aesthesiometer Pharmacy College

Price: 10 INR/Piece

Compass Aesthesiometer JKA-312 We are manufacturers of finest Compass Aesthesiometer in India and also supplies and exporters Compass Aesthesiometer around the world at best prices. To enquire Compass Aesthesiometer, Please fill below form . We will be back with you.

Send Inquiry
Request To Call Back
Product Image (JKA-179)

Animal Head Holders

Price: 10 INR/Piece

Animal Head Holders Animal Head Holders (Universal) : For rabbits, cats, guinea pigs & small dogs etc.

Send Inquiry
Request To Call Back
Product Image (MTK-101229)

Mild Steel Sectional Working Model of 2 Stroke Diesel Engine

  • Color:Silver Red
  • Material:Mild Steel
  • Operate Method:Diesel
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-101035)

Two Crank and Linkage Drive Model

  • Color:Grey Yellow
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101161)

Aluminium made Sectional Working Model of 2 Stroke Petrol Engine

  • Color:Multicolor
  • Material:Aluminium
  • Operate Method:Petrol
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (JEQ-80DS)

Slide Dryer .

Price: 2000.0 INR/Piece

Maximum number of slices: 40 Temperature setting range: 0-70 DEGREE C Timing range: 1-240min Operating temperature/humidity: 10-35 DEGREE C, ‰80% Weight: 8.5KG

Send Inquiry
Request To Call Back
Product Image (MTS-5059)

Drawing Instruments Set (Metal)

  • Color:Silver
  • Feature:Durability, Portable
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Education
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image ( JEQ-13)

Heating Mantles

  • Color:Grey Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Freeze Dryer Lyophilizer

Price: 400000 INR/Piece
  • Automation Grade:Automatic
  • Color:Silver
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTK-6854AL)

1 CYLINDER TWO STROKE PETROL ENGINE TEST RIG WITH ROPE BRAKE/ ELECTRICAL BRAKE/HYDRAULIC BRAKE/ AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER

Price: 1000.00 INR/Piece

1 CYLINDER TWO STROKE PETROL ENGINE TEST RIG WITH ROPE BRAKE/ ELECTRICAL BRAKE/HYDRAULIC BRAKE/ AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER/ COMPUTERIZED 1 CYLINDER TWO STROKE PETROL ENGINE TEST RIG. Ic Engines Are Widely Used In Automobile, Domestic And Industrial Sector. They Are Classified According To Cycle, Number Of Cylinders, Arrangement Of Cylinders, Fuel Used, Type Of Ignition, Valve Arrangement, Cooling System. Test Rigs Are Used To Find Out The Performance Of An Ic Engine. It Consists Of An Ic Engine, Dynamometer, Fuel Measuring, Air Intake Measuring And Various Other Arrangements.

Send Inquiry
Request To Call Back
Product Image (MTS-438)

Concrete Permeability

Price: 1000.0 INR/Unit

Concrete Permeability Three pressure gauges for indicating pressure in each cell are supplied apart from the main pressure gauge which indicates pressure in chamber Features Available for three samples of size 150mm dia X 150mm high. Available for three samples of size 100mm dia X 100mm high. Accessories Compressor with pressure gauge 0-20 kg/cm sq. with automatic pressure valve and pressure rubber hose. Suitable for 440 volts A.C. three phase. Specimen casting mould C.I. for 100mm dia X 100 mm high cylinders, Specimen casting mould C.I. for 150mm dia X 10mm high cylinders, Specimen casting mould C.I. for 150mm cubes, Blow stove 1/2 litre capacity, Resin, Bees Wax, Wire brush, Chissel, Spare glass cylinder 500cc capacity a) Complete with 150mm Gun Metal mould, Single cell b) Complete with 150mm Gun Metal mould, Three cell Compressor for above, if required, pressure upto 300 PSI (Double Cylinder)

Send Inquiry
Request To Call Back
Product Image (MTUS-21)

Accessories for Ultrasonic Study

Price: 1000.0 INR/Piece

Accessories for Ultrasonic Study Facilitates the positioning of the transmitter and receiver Rip-off rug Set consisting of a rip stop soft mat with angle and distance markers for easy positioning of US transmitters and receivers during experiments and of two elements making it possible to constitute a variable opening slot. Experiments feasible study of the radiation pattern of the ultrasonic transducer, study of the diffraction of ultrasounds by a slit. Study of two elements making it possible to constitute a variable opening slit.

Send Inquiry
Request To Call Back
Product Image (JKA-107)

Frog Heart Chamber

FROG HEART CHAMBER Micro Teknik is manufacture, exporters & suppliers of : FROG HEART CHAMBER Bath fabricated out of transparent perspex sheet, chemically welded to make it perfectly leak -proof. Complete with clamp & drain a pair or silver electrodes and adjustable heat.

Send Inquiry
Request To Call Back
Product Image (JCA-08R)

DEHUMIDIFIERS .

Price: 1000 INR/Piece

CODE: JCA-08R Industrial dehumidifiers are more durable and provide higher water-removal capacity than office dehumidifiers. They are used for water-damage remediation jobs and for drying the air in warehouses, storage facilities, museums, and similar large indoor spaces. These condensate dehumidifiers have refrigerated coils that chill the air as it moves through them. This causes moisture in the air to condense and collect inside the dehumidifiers, allowing it to be drained or disposed of. These dehumidifiers are suitable for drying the air in warm, humid areas. Moisture Extraction Capacity: @30 C & 80% RH 100 Liters/day Coverage Area (Non A.C.): 800 Sq. Ft/8000 ft3. Moisture Extraction Capacity: @23 C & 60% RH 50 Liters/day Coverage Area (A.C. w/o AHU): 400 sq. ft/4000 ftï Body Material: SS 304/GI Humidity Control & Display: Up to 25% RH Water Collection Tank: 20 Liter Compressor: Recip Refrigerant: R 22 Power: 440/220V AC, 50Hz Noise Level: 70 dB Direct Drain Facility: Yes Pre filter: Yes Castor Wheel: Yes Dimension(inch) (L x D x H): 21.5 x 20.5 x 39

Send Inquiry
Request To Call Back
Product Image (MT-817S)

Spirometer . .

Price: 1000.0 INR/Piece
  • Color:Grey
  • Display Type:LCD Display
  • Feature:Highly Efficient
  • Power Source:Battery
  • Product Type:Spirometer
  • Type:Spirometer
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (JRS-05D)

ULTRA LOW DEEP FREEZER

Price: 1000 INR/Piece

Ultra-Low Deep Freezer (ULT), -80C/-86C Cooling and Cold Chain Deep freezer manual series products are applied to places needing storage at constant temperature, such as hospitals, epidemic prevention stations, blood banks, scientific research institutions, colleges and universities, biological pharmacies, genetic engineering, entrepreneurs, etc. Capacity: 108L Type: Vertical, Horizontal available Temp. Range: -40C-86C Temp. Accuracy: 0.1C Control System: Microprocessor control, LED display Audio and Visual Alarm: High and low temperature, Sensor failure Refrigeration Type: Direct refrigeration Refrigerant: Mixture refrigerant: Compressor: 1 set Condenser & Evaporator: Made of copper

Send Inquiry
Request To Call Back
Product Image (MT-101236)

AIR SUSPENSION TRAINER

Price: 1000.00 INR/Piece

AIR SUSPENSION TRAINER Components include: Air reservoir tank. Height sensor. Remote control pad.

Send Inquiry
Request To Call Back
Product Image (JEQ-21)

MELTING POINT APPARATUS

Price: 50.0 INR/Piece

MELTING POINT APPARATUS Metallic heating block. Focusable lens. Regulator to control the heat. 03 numbers of capillaries & 01 number of thermometer positions. Range: Ambient temperature to 250 C or better. 01 Thermometer temp 250 C or better with this Melting Point Apparatus. Input Voltage: Single Phase 230 Volts

Send Inquiry
Request To Call Back
Product Image (MTMP-15)

Micophone Hq .

Price: 200.0 INR/Piece

Micophone Hq Dynamic microphone Perfect for clean reproduction of vocals and instruments Versatile and ideal for general-purpose use Resilient to rough handling Frequency response 50-13 kHz

Send Inquiry
Request To Call Back
Product Image (JKA-315)

Hand Grip Dynamometer

Price: 450 INR/Unit

Hand Grip Dynamometer (Cat No. - JKA-315) These Grip Dynamometer are synonymous with excellent precision. Engineered following international industry standards, these Grip Dynamometer are widely acclaimed for their precised engineered, accuracy and optimum performance. Our Grip Dynamometer are available in various technical specifications as per the choices of clients. Features: Resistant to weather Easy to install Superb quality

Send Inquiry
Request To Call Back
Product Image ( JEQ-5E)

VDRL Rotators And Shaker

Price: 5000.0 INR/Piece
  • Accuracy:100 %
  • Automation Grade:Automatic
  • Feature:Highly Efficient
  • Power Source:Electric
  • Product Type:VDRL Rotators And Shaker
  • Usage:Laboratory
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (Item Code: JKA-108)

New Nerve Muscle Chamber Lucas Moist Chamber

Price: 11250 INR/Unit

Item Code: JKA-108 New nerve Muscle chamber / Lucas Moist Chamber : Bath size 17 x 33 cm fabricated out of transparent perspex sheet, chemically welded to make it perfectly leak-proof. Complete with cork lined bottom, a pair of adjustable silver electrodes, clamps & drain, interchangeable muscle & heart lever fitments.

Send Inquiry
Request To Call Back
Product Image (MTFB-10)

Fixing Brackets

Price: 10.0 INR/Piece
  • Application:General lab equipments
  • Core Components:Bracket body, mounting holes
  • Equipment Materials:Stainless Steel / Mild Steel (as per model)
  • Feature:Corrosion-resistant, durable, easy installation
  • Product Type:Fixing Brackets
  • Type:Fixing Bracket
  • Usage:General lab equipments
  • Weight:Approx. 150g to 500g (varies by model and size)
Send Inquiry
Request To Call Back
Product Image (MTS-101086)

Hooks Coupling Double

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (JEQ-4G)

Co2 Incubator Laboratory Equipment

  • Automation Grade:Automatic
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTTG-35)

Thermogenerator . .

Price: 500.0 INR/Piece

Thermogenerator To show the conversion of thermal energy into electrical energy. Mase based on the principle of the thermocouple. A metal blade plunges in cold water, the other in hot water. The apparatus produces electric current and rotate the propeller as long as the temperature difference persists. The electrical voltage obtained is measurable thanks to 2 bushings 4 mm safety Dimensions 260 x 55 x 60 mm Supplied with two clear plastic tanks.

Send Inquiry
Request To Call Back
Product Image (MT-101225)

CAR CHARGING TRAINER

Price: 1000 INR/Piece

CAR CHARGING TRAINER We are manufacturer, exporter and supplier of car charging trainer. Alternator Charging teaching model

Send Inquiry
Request To Call Back
Product Image (MT-892)

Plateau Weights Person

Price: 1000.0 INR/Piece

Plateau Weights Person Range : -200 to 800 N -800 to 3500 N Resolution : 0.3 N 1.2 N

Send Inquiry
Request To Call Back
Product Image (P-B4)

Bottle Cap Sealing Machine

Price: 100 INR/Piece

Bottle Cap Sealing Machine Hand Operated : (P-B4) P-B4: Bottle Cap Sealing Machine : Portable, hand operated equipment with two extra cap holders of different sizes. Totally casted machine hand operated. Hand operated.

Send Inquiry
Request To Call Back
Product Image (MT-80009)

Basic Electronics Training System

Price: 100 INR/Piece

Specification of Basic Electronics Training System : Multipurpose electronics trainer with 1280 pt breadboard. TTL generator at least from 1 to 106 Hz. Signal generator. Seven-segment displays. Power supply 5V, 2A.

Send Inquiry
Request To Call Back
Product Image (MTS-430)

Crushing Value Apparatus

Price: 100.0 INR/Set
  • Application:Highway and Pavement Engineering
  • Color:Silver
  • Core Components:Cylindrical Cell, Plunger, Base Plate, Tamping Rod
  • Equipment Materials:Hardened Alloy Steel (Case Hardened)
  • Feature:Very long lasting, Fine finish
  • Material:Stainless Steel
  • Product Type:Aggregate Testing Equipment
  • Usage:Measures the suitability of aggregates for roads
Send Inquiry
Request To Call Back
Product Image (MTS-475)

Din Abbrasion Machine

Price: 1000.0 INR/Unit
  • Automation Grade:Fully Automatic (Preset cycles)
  • Classification:Polymer & Rubber Testing Lab
  • Frequency:50 Hertz (HZ)
  • Operate Method:Standardized Friction: A 16mm diameter specimen is pressed against the rotating drum with a load of 10N while traveling laterally 40meters across the abrasive surface.
  • Power Source:Electric
  • Type:Drum-Type Abrasion Tester
  • Usage:Essential for quality control in rubber manufacturing
  • Voltage:230 Volt (v)
Send Inquiry
Request To Call Back
Product Image (MTWE-33)

Wind Energy Conversion Apparatus

Price: 500.0 INR/Piece

Wind Energy Conversion Apparatus To show that wind energy converted into electrical energy. Conversion chain study: mechanical energy, wind, electric, bright. Visualization of energy production on needle and LED voltmeter red. Dimensions: 205 x 127 x 123 mm.

Send Inquiry
Request To Call Back
Product Image (MTSB-24)

Single Banana Cords Reverse Rear Length

Price: 50.0 INR/Piece

Single Banana Cords Reverse Rear Length length: 50cm Color: Black Compatible with all types of sockets 4 mm Maximum operating voltage: 30 VAC and 60 VDC Section: 0.75 mm2, Intensity: 12 A, Max. Voltage: 30 V AC / 60 VDC, PVC insulating coating, Temperature resistance: -20 to 80C.

Send Inquiry
Request To Call Back
Product Image (MTS-454(a))

Automatic Compression Testing Machine for Soil Testing

Price: 5000.0 INR/Unit

Automatic Compression Testing Machine The Automatic Compression Testing Machine has all features of Micro Controller based Compression Testing Machine. In addition, it has: 1. An automatic load release facility 2. Support for data transmission over distances upto several kilometers. This is useful for testing in the field. (Optional feature) 3. Measurements of Strain with a resolution of upto 0.001 mm (optional feature) 4. Measurement of Flexural Strength (optional feature) 5. Facility to enter the required pace rate, at the beginning of the run Software: A powerful Analysis and Reporting Software Tools with the following Features: An intuitive and easy to use graphical user interface Facility to list all the runs stored in the digital head/box Facility to download and plot the data for a selected run Facility to save test-data along with other information about the sample such as age, sample number and batch name On -line graph of Load Vs Time Numerical display of the instantaneous value of the load Automatic display of a breaking load at the end of the test Log-in controlled multilevel access A facility for creating users and enabling /disabling their log-in permissions A sophisticated reporting tool which can be used to generate-Reports for individual samples with data in graphical of tabular form Load Vs Time Plot Stress Vs Time Plot Calibration report Batch Summary report Selective deletion of individual and multiple sample records Online Help Manual

Send Inquiry
Request To Call Back
Product Image (MTSB-23)

Single Banana Cords Reverse Release

Price: 50.0 INR/Piece

Single Banana Cords Reverse Release Length: 50cmColor: Red Compatible with all types of sockets 4 mm Maximum operating voltage: 30 VAC and 60 VDC Section: 0.75 mm2, Intensity: 12 A, Max. Voltage: 30 V AC / 60 VDC, PVC insulating coating, Temperature resistance: -20 to 80C.

Send Inquiry
Request To Call Back
Product Image (MTS -499)

High Speed Stirrer

Price: 1000.0 INR/Piece
  • Accuracy:100 %
  • Automation Grade:Manual / Semi-Automatic
  • Frequency:50 Hertz (HZ)
  • Measurement Range:Up to 10,000 RPM (Typical)
  • Operate Method:Mechanical Agitation: The soil-water mixture is placed in the baffled cup and stirred at high speed for a specified duration (usually 1 15 minutes) to ensure total dispersion
  • Power Source:Electric
  • Type:Soil Dispersion Stirrer
  • Voltage:230-250 Volt (v)
Send Inquiry
Request To Call Back
Product Image (MTOC-16)

2-way Digital Oscilloscopes

Price: 1000.0 INR/Piece

2-way Digital Oscilloscopes DOX 2025 B (Metrix) Number of channels: 2-way Bandwidth: 25 MHz Display: 7 inch color TFT LCD resolution 480 x 234 Vertical sensitivity: 12 2mV-10V calibres / basic division-accuracy ± 3% Time base:> 100 ms Scan speed: 25 ns / div to 50 s / div (oscilloscope mode) Trigger: 1 CH1, CH2, Ext, Ext / 5, sector / automatic, tripped, single-shot, XY Functions: Autoset: adjustment of the amplitude of the time base and the MATH trigger position on the channels: trace calculated in real time Memory: Max acquisition: 32 K points Unlimited storage capacity (USB key) File management: Trace files (proprietary format and CSV format compatible with spreadsheets) Screen copy files (.BMP format compatible with windows) Communication: USB port and USB HOST Power supply: 100-240 V / 45-440 Hz / 50 VA max Safety: Safety according to IEC61010-1 (2001) CEM according to EN613 26-1 Dimensions / Weight: 323 x 137 x 157 mm / 2.3 kg Supplied accessories: 2 switchable 1/1 and 1/10 voltage sensors, USB A / B cable, CD-ROM with PC software, LW / LV drivers Operating instructions

Send Inquiry
Request To Call Back
Product Image (MTDR-41)

Boxes With Resistance Decades

Price: 500.0 INR/Piece

Boxes With Resistance Decades Number of decades: 5 Characteristics: 111,111 ¼f Weight: 1kg

Send Inquiry
Request To Call Back
Product Image (JEQ-4G)

Co2 Incubator

  • Automation Grade:Automatic
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101080)

Rivets Set of Four Metal Model

  • Color:Grey Blue
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MPH-EE-78B)

CRO 20MHZ, DUAL CHANNEL, 2 TRACE WITH COMPONENT TESTER

Price: 100 INR/Piece
  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image ( JEQ-5-B)

Shaking Machines Rotary

Price: 1000.0 INR/Piece
  • Accuracy:100 %
  • Color:Black Grey
  • Equipment Materials:Mild Steel
  • Feature:Highly Efficient
  • Material:Mild Steel
  • Product Type:Shaking Machines Rotary
  • Usage:General Lab Equipments
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Day
Send Inquiry
Request To Call Back
Product Image (MTMA-28)

Plumb -line .

Price: 500.0 INR/Piece

Plumb-line Brass

Send Inquiry
Request To Call Back
Product Image (MTE-MP57)

Moufle Prehending .

Price: 200.0 INR/Unit
  • Accuracy:100 %
  • Color:Brown
  • Equipment Materials:Rubber
  • Material:Rubber
  • Power Source:Manual
  • Product Type:Moufle Prehending
  • Type:Moufle Prehending
  • Usage:Laboratory
Send Inquiry
Request To Call Back
Product Image (MT-806T)

Thermometer . .

Price: 1000.0 INR/Piece
  • Accuracy:100 %
  • Equipment Materials:Glass
  • Feature:Highly Efficient
  • Power Source:Manual
  • Product Type:Thermometer
  • Temperature Range:-20 to 110 Celsius (oC)
  • Usage:General Lab Equipments
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-5060)

Probabilty Kit-Complete

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Plastic
  • Power Source:Manual
  • Usage:Mathematical Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5057)

Theodolite Model

  • Color:Green Red
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-5010)

Map Measurer Rotameter

  • Color:Black
  • Dimension (L*W*H):254 - 304.8 Millimeter (mm)
  • Material:Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-5027)

Student Abacus (Wooden)

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Wooden
  • Power Source:Manual
  • Usage:Education
Send Inquiry
Request To Call Back
Product Image (MTS-5006)

Architectural French Curves

  • Application:Lab
  • Color:Transparent
  • Feature:Durable, light weight
  • Material:Plastic
  • Power Source:Manual
  • Warranty:Yes
  • Weight:100-200 Grams (g)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-5007)

Plain Divider

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
  • Weight:10-50 Grams (g)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS 960)

Thermometer / Hygrometer Combined Barigo

  • Color:White Silver
  • Feature:Durable, light weight
  • Material:Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5011)

Beam Compass

  • Application:Lab
  • Color:Silver and Brown
  • Dimension (L*W*H):304.8 - 508 Millimeter (mm)
  • Feature:Durable, light weight
  • Material:Wooden Steel
  • Operate Method:Manual
  • Power Source:Manual
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-101283)

Hydraulic Press Model

  • Color:Pink SIlver
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5044)

Standard Time Indicator (Metal)

  • Color:Grey
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Education
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5047)

Weight Set (Metal)

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5029)

Geo Board-Square (Wooden)

  • Color:Yellow Brown
  • Feature:Durable, light weight
  • Material:Wooden
  • Power Source:Manual
  • Usage:Education
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5009)

Ink Bow Compass

  • Color:Transparent
  • Dimension (L*W*H):254 - 304.8 Millimeter (mm)
  • Material:Plastic
  • Operate Method:Manual
  • Power Source:Manual
  • Usage:Education
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-5024)

Construct-a Clock (Wooden)

  • Color:Multicolor
  • Dimension (L*W*H):101.6 - 254 Millimeter (mm)
  • Feature:Durable, light weight
  • Material:Wooden
  • Power Source:Manual
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-5004)

Meter Scale for Chemistry Lab

  • Color:White
  • Material:Plastic
  • Power Source:Manual
  • Type:Scale
  • Usage:Education
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-5052)

Vernier Calliper (Metal)

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Metal
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-80005)

Mobile Screen For Projection

  • Color:White Black
  • Feature:Durability, Portable
  • Power Source:Manual
  • Usage:Laboratory
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-109625)

Recording Thermograph

  • Color:Grey
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-101220)

TACHOMETER .

  • Application:Industrial
  • Color:Black
  • Display Type:LCD Display
  • Feature:Durable, light weight
  • Material:Plastic
  • Power Source:Electric
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-101299)

Rotary Pump in Large Size

  • Color:Silver Black
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-12078)

Tube Well Model

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Voltage:230 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-12099)

Sliding Wedge Gear

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MT-101209)

Headlight Beam Adjuster

  • Color:Black White
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Voltage:110 Volt (v)
  • Warranty:1 Year
  • Weight:20-50 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-101019)

Friction Wheel Transmission

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MTS-101033)

Crank Shaft to Slider Mechanism

  • Color:Blue White
  • Feature:Durable, light weight
  • Material:Mild Steel, Wooden
  • Power Source:Manual
  • Usage:Laboratory
Send Inquiry
Request To Call Back
Product Image (MTS-101029)

Mechanism model

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MTS-101034)

Crank and Slotted Link Mechanism

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MTS-101026)

Planar Four-Link Mechanism

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MT-28016)

Die Stock

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-63)

MIRROR STEREOSCOPE

  • Color:Silver
  • Dimension (L*W*H):270x340x700 Millimeter (mm)
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (P-G2)

Granulating Sieves

  • Color:Brown
  • Material:Wooden, Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:No
Send Inquiry
Request To Call Back
Product Image (P-B6)

Mild Steel Ball Mill

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image ((Cat No. -J1 ))

Microtome Object Holders

  • Color:Multicolor
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Microtome Equipments
  • Warranty:No
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-101075)

Stainless Steel Tie Rod Joint

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-101059)

Power Brake Actual Working

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101085)

Hooks Coupling Model

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MT-101207)

ROTARY ENGINE

  • Color:Black White
  • Feature:Durable, light weight
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
  • Weight:10-40 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-101084)

Universal Coupling

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-101093)

Claw Clutch Working Model

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Cast Iron
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MT-101211)

EDDY CURRENT BRAKES TRAINER

  • Color:Blue White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
  • Weight:10-65 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MT-101210)

DIESEL INJECTION PUMP TESTER

  • Color:Green
  • Display Type:LCD Display
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Operate Method:Diesel
  • Power Source:Electric
  • Warranty:1 Year
  • Weight:20-60 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MT-101225)

2 STROKE S.I. ENGINES

2 STROKE S.I. ENGINES Specification: Cutaway teaching model, educational equipment All parts are made in aluminium alloy & metal, Ignition is shown by means of a miniature bulb.

Send Inquiry
Request To Call Back
Product Image (MTS-10959)

Bar Pendulum or Compound Pendulum

  • Color:Blue
  • Feature:Durable, light weight
  • Material:Iron
  • Power Source:Manual
  • Usage:Industrial
Send Inquiry
Request To Call Back
Product Image (MT-101209)

HEAD LIGHT ADJUSTMENT EQUIPMENT

  • Color:Red Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Weight:5-20 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-101036)

Slotted Link Bar Mechanism

  • Color:Blue
  • Feature:Durable, light weight
  • Material:Mild Steel, Wooden
  • Power Source:Manual
  • Usage:Laboratory
Send Inquiry
Request To Call Back
Product Image (MT-101266)

WHEEL BALANCING MACHINE

  • Color:Orange
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
  • Weight:20-80 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-10964)

Centrifugal Force Apparatus

  • Color:Silver
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-19044)

Pan and Box Breake

  • Color:Blue
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101037)

IMenversion of Four Bar chanism

  • Color:White Blue
  • Feature:Durable, light weight
  • Material:Mild Steel, Wooden
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MT-101206)

CUMMINS ENGINE

  • Color:Red Black
  • Material:Stainless Steel
  • Operate Method:Diesel
  • Usage:Industrial
  • Warranty:1 Year
  • Weight:20-60 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-101053)

Disc Brake Model

  • Color:Blue White
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-101054)

Disc Brake Actual Working

  • Color:Multicolor
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101070)

Wall Brackets for Industrial use

  • Color:Black
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-101087)

Double Hooks Coupling Experimental Apparatus

  • Color:Silver Black
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Industrial Freeze Dryer

Price: 400000 INR/Piece
  • Color:Silver
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-8005)

Water Temperature Recorder

  • Color:White
  • Display Type:LCD Display
  • Material:Plastic
  • Power Source:Battery
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-101428)

Basic Hydraulic Bench

  • Color:Silver
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-405)

Bulk Density Measure

  • Color:Blue
  • Feature:Durability, Portable
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-418)

Core Cutter with Dolly

  • Color:Blue
  • Feature:Durability, Portable
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-410)

Bitumen Extractor Motorised

  • Automation Grade:Automatic
  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Voltage:230 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-101431)

Series And Parallel Pump Set

  • Color:Blue Black
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-4063)

Motorized Compression Tension Machine

  • Color:Blue White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-414)

Bitumen Extractor Hand Operated for Industrial use

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
Send Inquiry
Request To Call Back
Product Image (MTS-433)

Mild Steel Compaction Factor Apparatus

  • Color:Blue
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
Send Inquiry
Request To Call Back
Product Image (MT-101432)

Ribbon And Cone Blender

  • Color:Silver
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-412)

Blaines Air Permeability Apparatus

  • Color:Brown
  • Material:Wooden, Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-404 (C))

Aggregate Crushing Value Test Apparatus

  • Color:Blue
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-427)

CBR MOULD

  • Color:Silver
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Weight:10 Kilograms (kg)
Send Inquiry
Request To Call Back
Product Image (MTS-432)

Field CBR Test Apparatus

  • Color:Blue Silver
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-463)

Dynamic Cone Penetration Apparatus

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-425)

Blue colored Cement Mortar And Concrete Permeability

  • Color:Blue
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MTS-440)

Mild Steel Consolidation Apparatus

  • Color:White
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-461(b))

Direct Shear Machine Test Apparatus

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:Yes
  • Weight:175 Kilograms (kg)
Send Inquiry
Request To Call Back
Product Image (MTS-459)

C.B.R. Appratus Field Type

  • Color:Blue
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-490)

Flow Table Hand operated with M.S Top

  • Color:Blue
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (EM-257)

Digital Blood Cell Counter

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Plastic
  • Power Source:Electric
  • Usage:Laboratory
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (EM-7181M)

Microprocessor Conductivity And Tds Meter

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Temperature Range:-20.0 to +200 Celsius (oC)
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (EM-71M)

Microprocessor Conductivity Meter

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Temperature Range:0 to 100 Celsius (oC)
  • Usage:Analytical Lab Instrument
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (P-H2)

Hammer Grinder

  • Color:Grey Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Product Type:Hammer Mill
  • Usage:Pharmaceutical Lab
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (P-D1A)

Disintegration Test Machine for Lab Use

  • Color:Black
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Pharmaceutical Lab Equipment
  • Voltage:220 Horsepower (HP)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (EM-142ND)

Microcontroller-Based UV-Vis Spectrometer

  • Color:White Blue
  • Frequency:50 Hertz (HZ)
  • Material:Plastic
  • Power Source:Electric
  • Usage:Laboratory
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (P-D2)

Disintegrator .

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image ((Cat No. - EM-41))

Paper Electrophoresis Apparatus

  • Color:Transparent
  • Material:Plastic
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (P-A2)

Ampoule Filling And Sealing Device

  • Color:Blue Grey
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image ( P-C6)

Cone Blender

  • Capacity:5-10 Kg
  • Color:Silver
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (P-F1)

Friability Test Apparatus

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (P-L1)

Laboratory Wiley Mill

  • Color:Grey Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (JEQ-14B)

Distillation Stills Barnstead Type

  • Color:Silver
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JP-17)

Specimen Jar

  • Color:Transparent
  • Material:Polypropylene
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image ( P-C9)

Cage Metabolic

  • Color:Silver
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (P-B7)

Bulk Density Apparatus

  • Color:Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image ( JEQ -15 )

Soxhlet And Digestion Units

  • Color:White Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JEQ-4H)

Hybridization Incubator

  • Automation Grade:Automatic
  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JEQ-12)

Hot Plates

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JRS-05D)

Ultra Low Deep Freezer

  • Capacity:200 Ltr
  • Material:Stainless Steel
  • Power:220 Volt (v)
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:12 Watt (w)
  • Warranty:1 Year
  • Weight:50 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image ( JEQ-14G)

All Glass Distillation Apparatus

  • Capacity:50 Milliliter (ML)
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Glass
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220/230 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JRS-02)

Refrigerated Water Bath

  • Automation Grade:Automatic
  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Temperature Range:0 to 90 Celsius (oC)
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JRS-04D)

Deep Freezer

  • Capacity:220 Ltr
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Operate Method:Electric
  • Power:220 Volt (v)
  • Type:Deep Freezer
  • Voltage:12 Watt (w)
  • Weight:50 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image ( J-8)

Rotary Senior Microtome

  • Color:Grey Blue
  • Material:Mild Steel
  • Operate Method:Manual
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image ( J-11)

Sliding Microtome

  • Color:Black
  • Material:Stainless Steel
  • Operate Method:Manual
  • Power Source:Manual
  • Product Type:Sliding Microtome
  • Usage:Laboratory Equipment
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image ( JCR-1)

Mild Steel Cryostat Microtome

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Voltage:230 Volt (v)
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image ( J-8ED1)

Digital Microtome

  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (J-10)

Freezing Microtome

  • Color:Blue
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JEQ-2B)

Serological Water Bath

  • Color:Grey Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Heat And Refrigeration System
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JEQ-3A)

Universal Ovens

  • Color:Green White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-101431)

Absorption In Packed Bed

Micro Teknik We are offering superior quality Adsorption in Packed Bed to the esteemed customers, as per their specific demands.

Send Inquiry
Request To Call Back
Product Image ((Cat No. - EM-38M))

Metronome .

Metronome : (EM-38M) Metronome : Electronic apparatus for different sound output, Beats per minutes 40-50 interval of 2, 60-70 interval of 3, 70-120 interval of 4, 120-150 interval of 6 select able with accent 1 to 9.

Send Inquiry
Request To Call Back
Product Image (P-T5B)

Tablet Hardness Tester

TABLET HARDNESS TESTER : P-T5B Complete with dial gauge. Powder coated machine parts. Useful to take quick reading on dial, more accurate in grammes. All contact parts made of stainless steel 0-20kg.

Send Inquiry
Request To Call Back
Product Image (MTDS-26)

Calibrated Springs With Index

Price: 500.0 INR/Piece
  • Accuracy:1% or as required %
  • Application:General lab equipments
  • Capacity:Standard calibration loads as per model specification Kg
  • Core Components:Calibrated Spring, Index, Mounting Base
  • Display Type:Index Marked
  • Equipment Materials:High-Grade Spring Steel
  • Product Type:Calibrated Springs With Index
  • Temperature Range:-10 C to +60 C Celsius (oC)
Send Inquiry
Request To Call Back
Product Image (MTVP-15)

Vacuum Bell With Integrated Pump

Price: 500.0 INR/Piece
  • Accuracy:100 %
  • Equipment Materials:Mild Steel
  • Feature:Highly Efficient
  • Material:Mild Steel
  • Power Source:Electric
  • Product Type:Vacuum Bell With Integrated Pump
  • Usage:General lab equipments
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTCE-21)

Cylinders of Equal Volumes

Price: 50.0 INR/Unit
  • Accuracy:100 %
  • Color:White Red Yellow
  • Equipment Materials:Glass
  • Feature:Highly Efficient
  • Material:Glass
  • Product Type:Cylinders of Equal Volumes
  • Usage:General Lab Equipments
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Day
Send Inquiry
Request To Call Back
Product Image (JKA-141)

Muscle Grip

Price: 5 INR/Piece
  • Application:Pharmacy College Equipments
  • Automation Grade:Manual
  • Core Components:Metal Grip Handle
  • Feature:Ergonomic Design, Durable Construction, Non-slip Handle
  • Power Source:Manual
  • Product Type:Muscle Grip
  • Type:Muscle Grip
  • Usage:Pharmacy College Equipments
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTE-M4)

Masses Marked

Price: 500.0 INR/Dozen
  • Color:Silver
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:General Lab Equipments
  • Warranty:No
Send Inquiry
Request To Call Back
Product Image (JEQ-5A)

Shaking Machine Wrist Action

Price: 500.0 INR/Piece
  • Accuracy:100 %
  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Type:Shaking Machine Wrist Action
  • Usage:Laboratory
  • Voltage:220 Volt (v)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (JKA-132)

Open Sided X Block

Price: 5 INR/Piece
  • Automation Grade:Manual
  • Equipment Materials:Metal
  • Feature:Open Sided X Shape Structure
  • Product Type:Block
  • Type:Open Sided
  • Usage:Microscope
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JKA-130)

Standard X Block

Price: 5 INR/Piece
  • Automation Grade:Manual
  • Dimension (L*W*H):Standard dimensions for X-Block (see manufacturer)
  • Feature:Rigid construction, Stable platform
  • Measurement Range:Compatible with various microscope sizes
  • Model No:Standard X Block
  • Type:Manual
  • Usage:Lab
  • Weight:Approx. 1-2 Kg
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image ( JEQ-6A)

Clinical Centrifuge Machines

Price: 1000.0 INR/Piece
  • Accuracy:1% or as required %
  • Capacity:Standard calibration loads as per model specification Kg
  • Color:White Blue
  • Core Components:Calibrated Spring, Index, Mounting Base
  • Equipment Materials:High-Grade Spring Steel
  • Material:Mild Steel
  • Temperature Range:-10 C to +60 C Celsius (oC)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTK-PP76)

Pipettes Pasteur in Polypropylene

Price: 1 INR/Piece
  • Accuracy:Designed for qualitative/transfer use; not for precision volume measurements
  • Application:General Lab Equipments
  • Capacity:1 ml, 3 ml, 5 ml
  • Core Components:Body (single piece molded PP plastic)
  • Equipment Materials:Plastic
  • Feature:Unbreakable, Non-toxic, Transparent, Autoclavable, Disposable
  • Product Type:Pipettes Pasteur in Polypropylene
  • Temperature Range:-80C to +121C (Autoclavable)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MT-1002DB)

Sample Dispensing Booth

Price: 1000.0 INR/Piece
  • Accuracy:100 %
  • Color:White
  • Feature:Highly Efficient
  • Material:Stainless Steel
  • Power Source:Electric
  • Type:Sample Dispensing Booth
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTEE-13B)

Electric 3W Resistors

Price: 10.0 INR/Piece
  • Color:Black
  • Dimension (L*W*H):100 x 70 x 33 Millimeter (mm)
  • Feature:Highly Efficient
  • Power Source:Electric
  • Product Type:Electric 3W RESISTORS
  • Usage:Industrial
  • Voltage:12 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-442)

Concrete Test Hammer (Small)

Price: 100.0 INR/Piece
  • Application:Bridges, buildings, and old structures
  • Color:Silver
  • Core Components:Impact Spring, Hammer Mass, Plunger, Slider
  • Equipment Materials:Aluminum Alloy Housing, Stainless Plunger
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Product Type:Surface Hardness Tester
  • Usage:Estimation of Compressive Strength
Send Inquiry
Request To Call Back
Product Image (MTEE-16)

SUPPORT COIL .

Price: 100.0 INR/Piece
  • Automation Grade:Manual
  • Core Components:Stainless Steel Coil
  • Dimension (L*W*H):150 mm x 40 mm x 40 mm Millimeter (mm)
  • Frequency:50/60 Hz Hertz (HZ)
  • Power Source:Electric
  • Type:SUPPORT COIL
  • Voltage:110-240 V Volt (v)
  • Weight:Approx. 250 g Grams (g)
Send Inquiry
Request To Call Back
Product Image (MTEE-7a)

Dipole Holder with Flap Connectors

Price: 100.0 INR/Piece
  • Dimension (L*W*H):100 x 70 x 33 Millimeter (mm)
  • Equipment Materials:Mild Steel
  • Feature:Highly Efficient
  • Material:Mild Steel
  • Power Source:Manual
  • Product Type:DIPOLE HOLDER WITH FLAP CONNECTORS
  • Usage:General lab equipments
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS -492(b))

Flexture testing machine motorised

Price: 100000.0 INR/Unit
  • Classification:Civil Engineering
  • Feature:Motorized Operation
  • Frequency:50 Hertz (HZ)
  • Operate Method:Motorized
  • Power Source:Electric
  • Type:Flexure Testing Machine
  • Usage:Concrete/Brick Test
  • Voltage:230 Volt (v)
Send Inquiry
Request To Call Back
Product Image (MTEE-21)

DC Electric Motor Model Kit

Price: 1000.0 INR/Set
  • Accuracy:High %
  • Application:General Lab Equipments
  • Core Components:Motor
  • Equipment Materials:Metal Body
  • Feature:Heavy Duty, Durable
  • Material:Metal Body
  • Product Type:Motor
  • Usage:Laboratory
Send Inquiry
Request To Call Back
Product Image (JKA-68)

Hook and Weight

Price: 10 INR/Unit
  • Accuracy:1g
  • Application:Student Lab
  • Core Components:Hook and Weight
  • Display Type:Analog
  • Equipment Materials:Iron
  • Feature:Durable, corrosion-resistant
  • Temperature Range:-10C to 40C
  • Usage:Product Weight
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTB-12)

Model Eye .

Price: 100.0 INR/Pack
  • Accuracy:Simulates Human Eye Anatomy %
  • Application:General lab equipments
  • Capacity:Standard Artificial Chamber Size Pcs/hr
  • Core Components:Artificial Cornea, Sclera, Mount Base
  • Equipment Materials:High-Grade Polymer / Acrylic
  • Feature:Reusable, Anatomically accurate, Easy to mount
  • Product Type:Fixing Brackets
  • Temperature Range:Room Temperature Celsius (oC)
Send Inquiry
Request To Call Back
Product Image (JKA-105)

Frog Board

Price: 100 INR/Piece
  • Application:Student Lab
  • Equipment Materials:SS and Wood
  • Product Type:Frog Board
  • Type:Manual
  • Usage:Practical Use
  • Weight:2-5 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTMV-12)

Multimeter- Thermometer - Dc Voltmeter

Price: 100.0 INR/Piece
  • Accuracy:100 %
  • Color:Black
  • Equipment Materials:Plastic
  • Feature:Highly Efficient
  • Material:Plastic
  • Product Type:Multimeter- Thermometer - Dc Voltmeter
  • Usage:General lab equipments
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTEE-13)

Resistors 3 W

Price: 10.0 INR/Piece
  • Accuracy:100 %
  • Dimension (L*W*H):100 x 70 x 33 Millimeter (mm)
  • Feature:Highly Efficient
  • Power Source:Electric
  • Product Type:RESISTORS 3 W
  • Usage:Industrial
  • Voltage:12 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTEE-13A)

Black 3W Resistors

Price: 10.0 INR/Piece
  • Accuracy:100 %
  • Color:Black
  • Feature:Highly Efficient
  • Power:3 Watt (w)
  • Power Source:Electric
  • Type:Black 3W RESISTORS
  • Usage:Industrial
  • Voltage:12 Volt (v)
Send Inquiry
Request To Call Back
Product Image (MTCD-23)

Circular Demonstration Dynamometers

Price: 100.0 INR/Piece
  • Accuracy:100 %
  • Color:Transparent
  • Dimension (L*W*H):170 x 20 Millimeter (mm)
  • Equipment Materials:Glass
  • Material:Glass
  • Power Source:Manual
  • Product Type:Circular Demonstration Dynamometers
  • Type:Circular Demonstration Dynamometers
Send Inquiry
Request To Call Back
Product Image (MTS-403)

Aggregate Impact Tester with Blow Counter

Price: 100.0 INR/Paint
  • Color:Silver
  • Feature:Durability, Portable
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (J2)

Microtome Razor

Price: 10 INR/Piece
  • Automation Grade:Manual
  • Capacity:Standard blade size, suitable for microtome applications
  • Dimension (L*W*H):Approx. 120 mm x 22 mm x 0.25 mm
  • Equipment Materials:High-grade Stainless Steel
  • Model No:Standard Microtome Razor
  • Power Source:Manual (Non-electric)
  • Type:Microtome Razor Blade
  • Weight:Approx. 20-50 grams (per blade)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JEQ-5D-iii)

Shaking Machine Kahn Rack Type

Price: 2000.0 INR/Piece
  • Accuracy:1 rpm
  • Application:General Lab Equipments
  • Capacity:20 racks (for Kahn tubes)
  • Core Components:Shaking motor, rack holder, body frame
  • Equipment Materials:Stainless Steel with Powder Coated Mild Steel Body
  • Feature:Uniform shaking, easy tube loading/unloading
  • Temperature Range:Ambient
  • Usage:General Lab Equipments
  • Delivery Time:1 Week
  • Supply Ability:100 Per Day
Send Inquiry
Request To Call Back
Product Image (MTK-321C)

Solder-less Flexible Breadboard Jumper Wires M/m

Solder-less Flexible Breadboard Jumper Wires M/m Material: plastic + copper Size: Size: 200mm +/- 5mm long Set of 100 pcs

Send Inquiry
Request To Call Back
Product Image (MTK-322)

Alligator /crocodile Clip Test Leads

Alligator /crocodile Clip Test Leads Color: Red, Green, Yellow, White, and Black etc. Cable length: 55cm / 15inch. They are very useful for connecting components to wires. It is insulation covered clips connected to the wire from both ends.

Send Inquiry
Request To Call Back
Product Image (MTK-322A)

Retractable, Stackable Banana Test Lead

Retractable, Stackable Banana Test Lead Material:Copper Material:PVC Color:Red Black Size:4mm

Send Inquiry
Request To Call Back
Product Image (MTK-324)

Banana Plug to Banana Plug Cable Test Lead Wire Cable Set

Banana Plug to Banana Plug Cable Test Lead Wire Cable Set Banana Plug Overall Length:51mm(approx) Cable Overall Length:100cm(approx) Max. Current:15A Color:Black, Red

Send Inquiry
Request To Call Back
Product Image (MTK-325)

Banana Plug to Crocodile Alligator Clip Cable Stackable Test

Banana Plug to Crocodile Alligator Clip Cable Stackable Test Wire length:1.0M 1.5M 2.0M 3.0M Current/Voltage:15A/1000V

Send Inquiry
Request To Call Back
Product Image (MTK-325B)

Bnc to Shrouded Banana Plugs and Sockets Jumper Cable

Bnc to Shrouded Banana Plugs and Sockets Jumper Cable 3 Meters, Approx. 10 Feet in Length. Shrouded Banana plug.

Send Inquiry
Request To Call Back
Product Image (MTK-3028D)

Digital Phosphor Oscilloscope

Digital Phosphor Oscilloscope Wave Inspector controls provide easy navigation and automated search of waveform data Filter variable low-pass filter allows for removal of unwanted signal noise while still capturing high-frequency events probe interface supports active, differential, and current probes for automatic scaling and units 7 in. (180 mm) wide-screen TFT-LCD color display Small footprint and lightweight - only 5. 3 in. (134 mm) deep and 7 lb. 14 oz. (3. 6 kg)

Send Inquiry
Request To Call Back
Product Image (MTK-732)

Rlc Meter

Rlc Meter Capacity:0.1 µA - 10 mF Base accuracy:0.5 % Inductivity:0.1 µH - 10000 H Displays:20000 digits Measurement frequency:120 Hz/1 kHz Resistance:1 m - 10 Power supply:9 V battery

Send Inquiry
Request To Call Back
Product Image (MTK-733)

LCR-Q METER

LCR-Q METER Variable Measured: L, C, R, Q & D. Measurement: Series or parallel equivalent. Modes Sort Modes: Absolute value or nominal value with % tolerance. Measurement Freq.: User selectable 100Hz or 1KHz. Accuracy of Mea- : ±0.25% of nominal. Frequency Maximum Voltage: 0.285V RMS (0.8V p-p) approx. Across Measuring Update: 2 per second. Rate Maximum Time for: 1 second. Display: 4 digit 7 segment 12.5mm high, bright LED with automatic decimal point. Component under Test Measurement Ranges Inductance: 0.1µH to 9999H. Capacitance: 0.3pF to 9999µF. Resistance: 0.001 ohm to 100M ohm. Basic Accuracy: ±0.25% of reading ±1 digit. Valid for L, C & R

Send Inquiry
Request To Call Back
Product Image (MTK-736)

Mtk-736 Wire Cutter/ Stripper Tool

Mtk-736 Wire Cutter/ Stripper Tool Length : 165 mm Superb heavy duty wire stripper & cutter with dial adjuster to preset wire size for removing insulation. Strips & Cuts Heavy Electrical & Cable wires from 2.1 SWG to 6 SWG.

Send Inquiry
Request To Call Back
Product Image (MTK-739)

Alligator Lead Set

Alligator Lead Set Each clip is crimped to ensure a good conduction. 10 piece set contains two of each: Black, red, white, green, and yellow. 22 gauge heavy insulation copper wire, 12".

Send Inquiry
Request To Call Back
Product Image (MTK-323A)

Banana Plugs to Test Probes

Banana Plugs to Test Probes Color: Black + Red Material: Plastic + Metal Voltage: 1000 volts

Send Inquiry
Request To Call Back
Product Image (MTK-740)

Banana to Mini-grabber Set

Banana to Mini-grabber Set 22AWG Cable, 4MM Security Banana Plug, 6MM Test Hook. Overall Length:Approx. 100cm (approx). Current:3A

Send Inquiry
Request To Call Back
Product Image (MT-800)

Optical tachometer

Optical tachometer Range: 1 to 99,999Counter Accuracy: ±0.05%,±1digit Power: 4 x 1.5V AA Alkaline Batteries (ALR-6)

Send Inquiry
Request To Call Back
Product Image (MTK-728)

Digital multimeter

Digital multimeter DC Voltage: 200mV-1000Vtd> AC Voltage: 200V-750V Current:2000uA-10A Frequency: Square Wave-50kHz Resistance:0 Ohms to 2000K Weight : 300 grams Dimensions : 13cm x 7cm x 3cm

Send Inquiry
Request To Call Back
Product Image (MT-MB6)

Metal Blades With Zinc Marking

Price: 100.0 INR/Piece
  • Accuracy:100 %
  • Color:Silver
  • Equipment Materials:Metal
  • Material:Metal
  • Power Source:Manual
  • Product Type:Metal Blades With Zinc Marking
  • Type:Metal Blades With Zinc Marking
  • Usage:General Lab Equipments
Send Inquiry
Request To Call Back
Product Image (JKA-178)

Small Animal Holder

Price: 10 INR/Piece
  • Application:Lab
  • Capacity:Holds single small animal (e.g., mouse or rat)
  • Core Components:Base platform, holding bars, securing clamp
  • Dimension (L*W*H):Approximately 20 x 7 x 9 cm
  • Equipment Materials:Metal
  • Feature:Non-corrosive finish, easy to clean
  • Usage:Small Animal
  • Weight:Approx. 350-500 g
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MT-806)

Strain gauge

  • Color:Black
  • Dimension (L*W*H):75x12.7x12.7 Millimeter (mm)
  • Frequency:50 Hertz (HZ)
  • Material:Aluminium
  • Power Source:Electric
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-727)

Viscometer Viscometer

  • Color:Silver
  • Dimension (L*W*H):30 x 44.8 x 32.1 Centimeter (cm)
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (EM-36P)

Electrode Ph

  • Automation Grade:Automatic
  • Color:Black
  • Display Type:LCD Display
  • Material:Plastic
  • Power Source:Battery
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-17010)

Particle Size Analysis Test Set

Particle Size Analysis Test Set Microteknik are offering Practical Size Analysis test Kit For Engineering lab. Use: Particle size analysis for fine grained soils, determination of specific gravity of soils types Specifications Analysis Test Set.

Send Inquiry
Request To Call Back
Product Image (JP-15)

Slide Storage Cabinet Flat Position

SLIDE STORAGE CABINET FLAT POSITION The slides are stored in flat position in Aluminium trays The trays slide in wooden groves and have puller devices Dust-proof door has locking arrangement. Capacity : 500 slides with 25 trays 1000 slides with 50 trays 2000 slides with 100 trays 5000 slides with 250 trays Note : Cabinets with higher capacities in model : JP-13, 15 can be fabricated on demand

Send Inquiry
Request To Call Back
Product Image (JKA-45)

Smoking And Varnishing Outfits

SMOKING & VARNISHING OUTFITS Micro Teknik is manufacture, exporters & suppliers of : SMOKING & VARNISHING OUTFITS Smoking & Varnishing Outfits are available in the following models:- Smoking Stand with turning handle for all sizes of cylinders. Smoking Burner-Gas. Smoking Burner-Kerosene with winding up gear.

Send Inquiry
Request To Call Back
Product Image (JKA-71)

Tambours .

TAMBOURS Micro Teknik is manufacture, exporters & suppliers of : TAMBOURS

Send Inquiry
Request To Call Back
Product Image (JKA-85)

Gimbal Lever

GIMBAL LEVER Micro Teknik is manufacture, exporters & suppliers of : GIMBAL LEVER Gimbal Lever: Consists of a spindle mounted on center and having a spring collar for grappling straws and such like material to form a light lever. Obviates extremely careful adjustments as the writing lever always falls towards the paper.

Send Inquiry
Request To Call Back
Product Image (JKA-88)

Fixit Lever

FIXIT LEVER Micro Teknik is manufacture, exporters & suppliers of : FIXIT LEVER Fixit Lever : The levers can be fixed to the spindle in the center of which avulcanite roller having 3 pin set at 90†™š…š on the central spindle. On one of these pins lever fits. Sliding through the frame is a rod carrying a spring that can be caused to bear against the roller its turning while other adjustments are made.

Send Inquiry
Request To Call Back
Product Image (JKA-7)

Muscle Twitch Assembly

Muscle Twitch Assembly Micro Teknik is manufacture, exporters & suppliers of : Muscle Twitch Assembly Muscle Twitch Assembly : Useful for recording muscle contractions on a smoked paper around cylinder of a drum. The components of assembly are as under : E/8 Recording Drum Drum Paper Clips Adjustable stand Crank Mygrograph Tuning Fork Dubois Raymond Induction coil Dubois Raymond Key Simple electrode

Send Inquiry
Request To Call Back
Product Image (JKA-100)

Myographic Lever

MYOGRAPHIC LEVER Myographic Lever is used to assist with after load screw and fixing nuts to fit on any Myograph.

Send Inquiry
Request To Call Back
Product Image (JKA-106)

Frog Muscle Chamber

FROG MUSCLE CHAMBER Frog Muscle Chamber : Bath fabricated out of Transparent Perspex sheet, chemically welded to ensure any leakage. Complete with clamp & drain, set of two adjustable silver electrodes and adjustable Muscle lever fitments

Send Inquiry
Request To Call Back
Product Image (MTS-412)

Bitumen Pentrometer Electronic Automatic

Price: 1000.0 INR/Unit
  • Automation Grade:Automatic
  • Dimension (L*W*H):410 x 280 x 515 mm
  • Frequency:50 Hz
  • Measurement Range:0-400 Penetration Unit
  • Model No:BPEA-01
  • Type:Bitumen Penetrometer Electronic Automatic
  • Voltage:220 V AC
  • Weight:18 kg approx.
Send Inquiry
Request To Call Back
Product Image (MTH-562)

Counting Chamber Set, Fuchs-rosenthal Ruling And Neuberger Ruling

Counting Chamber Set, Fuchs-rosenthal Ruling And Neuberger Ruling CODE: MTH-562 Functional description: The Fuchs-Rosenthal counting chamber is used to count white and red blood cells in Cerebra-Spinal Fluid (CSF) by observing them through a microscope on a calibrated grid, the exact dimensions of which are known. A counting chamber is used to count Leukocytes, eosinophils and platelets in blood and all cells in a biological fluid by observing them, through microscope, on a calibrated grid. Technical: Fuchs Rosenthal set: One chamber Cell depth: 0,2 mm Volume: 0,2 šµl Ruling patterns: Fuchs-Rosenthal ( Dark-line) 2 octagonal cover glasses Neubauer set: Fluid capacity is 0.1mm3/mm2 and 0.00025mm3/each grid square Cell depth: 0,1 mm 2 covers glasses Accessories: 1 red cell pipet 2 tubing 1 mouth pieces, 1 white blood cell pipet 1 plastic carrying case

Send Inquiry
Request To Call Back
Product Image (EM-57C)

Colorimeter, With Concentration Reading

Colorimeter, With Concentration Reading CODE: EM-57C Specification: Functional description: A device that is commonly used to determine the concentration of biochemical Substances such as hemoglobin. Technical: Operating modes-Absorbance, Concentration, Kinetic and Fixed time Wavelength range-Six standard interference filters: 340 nm 405 nm 505 nm 546 nm 578 nm 630 nm Band pass-Less than 40 nm Range-0 to 2 O.D. units Photometric accuracy-± 2% at 2.0 O.D units Photometric linearity- Better than 1% Reproducibility-1 Digit Temperature-37š ± 0.2šC Storage Capacity-25 Test parameters Printer-Built-in Supplied with Uninterruptible Power Supply (UPS) Consumables: 50 paper rolls

Send Inquiry
Request To Call Back
Product Image (MTH-46)

COUNTING TRAY, TABLET

COUNTING TRAY, TABLET CODE: MTH-46 Specification: Functional description: A tray to facilitate counting tablets. Technical: Base made of aluminum Sturdy handle Plastic pill counting tray Tray with clear lip handle and two corner spouts Dimensions 3.5 x 21 x 16cm Accessories: plastic spatula (1.5 x 14 cm)

Send Inquiry
Request To Call Back
Product Image (MTK-750)

Kit for the Construction of Asynchronous Motors

Kit for the Construction of Asynchronous Motors The kit is complete with magnetic pack, rotor and mechanical parts, copper excluded, for the construction of a 2 poles squirrel cage three phase asynchronous motor (1kw). For illustrating the construction phases of a motor. Squirrel cage three phase, 2 poles, 1000 w. Squirrel cage three phase, 4 poles, 800 w. Squirrel cage three phase, 6 poles, 600 w. Asynchronous single phase with capacitor, 2-4 poles, 300 w.

Send Inquiry
Request To Call Back
Product Image (MT-765)

Interactive Whiteboard

INTERACTIVE WHITEBOARD Large 84 inch screen Impress with 4K format, LED backlit display Connect via multiple USB ports and Bluetooth Instantly transform your computer or mobile screen for team collaboration Real time collaboration: Edit and mark documents directly on the whiteboard. Multiple devices connect for support across locations. Innovative handwriting recognition Write, scribble or draw with the electronic pen, using the white boards OCR recognition. No tired eyes Blue light mode and anti-glare screen reduces eye strain. Share results easily whiteboard visuals printed or send PDFs by email, to USB or directly to your office folders, on the cloud or network.

Send Inquiry
Request To Call Back
Product Image (MTG-823)

Gas Chromatograph Mass Spectrometer

Gas Chromatograph Mass Spectrometer

Send Inquiry
Request To Call Back
Product Image (MTK-323)

Banana to Banana Test Lead Set

Banana to Banana Test Lead Set Stackable 3-Way Banana Plug Test lead Length:36mm Color coded red and black leads

Send Inquiry
Request To Call Back
Product Image (MTK-3027B)

Digital Oscilloscopes

Digital Oscilloscopes Features: Dual Channel, DC to 30 MHz, 1mV/div., Invert facility in Both Channels Time Base:20 ns -0.2 s/ div., Variable Hold- Off Sweep Delay X10 Magnification XY Mode Triggering:DC-60 MHz, Active TV Sync Sep., Alternate triggering Component and Continuity Tester, 2 Level Calibrator, Overscan Indication

Send Inquiry
Request To Call Back
Product Image (MTK-729B)

Regulated Power Supply

Regulated Power Supply Type:DC Supply Voltage:18V 60V / 5A 1A Power:90W 54W Output Type:Single Power Source:Electric

Send Inquiry
Request To Call Back
Product Image (MTK-3027)

Analog Oscilloscope (Cro)

Analog Oscilloscope (Cro) Features The oscilloscope is general purpose 100 MHz bandwidth, ideal for service, education and production. 100 MHz bandwidth, dual channel Sets memory for front panel setting save & recall Cursor readout with 7 measurements Panel setup lock of digital-control functions Buzzer alarm Trigger signal output Z-Axis modulation input SMD technology, high stability and reliability Specifications Vertical System: Bandwidth:DC100 MHz Sensitivity:2mV/DIV-5V/DIV, 11 steps in 1-2-5 sequence Rise time:3.5ns Vertical mode:CH1, CH2, DUAL (CHOP/ALT), ADD, CH2 INV. Horizontal System: Horizontal modes:MAIN(A), ALT, DELAY(B) Sweep time:50nS0.2S/div, continuously variable(UNCAL) Delay time:1us5s Trigger: Mode:AUTO, NORM, TV Source:CH1, CH2, LINE, EXT Coupling:AC, DC, HFR, LFR4. X " Y Operation: X-axis mode:selectable CH1, CH2, EXT Y-axis mode:selectable CH1, CH2, CH1 and CH Sensitivity: 2mV/DIV-5V/DIV Bandwidth (-3dB):DC500 kHz5. CRT:Screen:6 rectangular, internal graticule with % scale.

Send Inquiry
Request To Call Back
Product Image (MTK-737B)

Bnc to Mini-grabber Test Lead Set

Bnc to Mini-grabber Test Lead Set Test lead of a BNC connector to 2 mini-grabber clips red+ black. Lead length 39-Inch 80cm.

Send Inquiry
Request To Call Back
Product Image (MTK-748)

Manual Coil Winder Winding Machines

Manual Coil Winder Winding Machines Automation Grade:Manual. Winding Motor Power:1HP. Max Speed:0-500rpm. Material:MS. Weight:5-10Kg.

Send Inquiry
Request To Call Back
Product Image (MTK-749B)

Winding Machine for Motors and Transformers

Winding Machine for Motors and Transformers Automation Grade:Semi-Automatic Power:2 HP Input Voltage:440V Voltage:220/240V AC,0.4 KVA Material:Mild Steel Frequency:50Hz Phase:Three Phase

Send Inquiry
Request To Call Back
Product Image (MTK-750A)

Impregnating Machine

Impregnating Machine Machine for impregnating in a simple and clean way the electric motors. It allows the impregnation of different sizes at the same time. The impregnating material at the end of the operation flows back into the tank. Dimensions:900 x 700 x 930 mm approx.

Send Inquiry
Request To Call Back
Product Image (MTK-750B)

Radial Vice

Radial Vice Radial vice fixed to the bench for holding stators with maximum diameter 320 mm. This accessory makes it easy to put into the slot in the winding stators for the construction of a motor.

Send Inquiry
Request To Call Back
Product Image (MTK-751)

Rotor Support Bracket

Rotor Support Bracket Adjustable in length. Fixed to the bench. Suitable for supporting the rotors during the motor construction and testing phases.

Send Inquiry
Request To Call Back
Product Image (MTS-576)

Tile Abrasion Testing Machine

Price: 10 INR/Piece

Tile Abrasion Testing Machine: This is used for determination of resistance to wear for Cement & Concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 R.P.M. in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 Kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A Pre-set Counter automatically stops the machine after 22 revolutions.This counter is Re-adjustable. The machine works on 440 V A.C. Three Phase electrical supply. On Request machine to operate on 230 V A.C. Supply can also be supplied.

Send Inquiry
Request To Call Back
Product Image (MTS-534)

Load Measurement Ring

Proving Ring, with dial gauge, with our calibration up to 20 kN Proving Ring, with dial gauge, with our calibration up to 30 kN Proving Ring, with dial gauge, with our calibration up to 50 kN Proving Ring, with dial gauge, with our calibration up to 100 kN Proving Ring, with dial gauge, with our calibration up to 200 kN Proving Ring, with dial gauge, with our calibration up to 250 kN Proving Ring, with dial gauge, with our calibration up to 500 kN Proving Ring, with dial gauge, with our calibration up to 1000 kN Proving Ring, with dial gauge, with our calibration up to 2000 kN Proving Ring, with dial gauge, with our calibration up to 3000 kN

Send Inquiry
Request To Call Back
Product Image (MTS-28)

Cross Staff for Surveying

Cross Staff:

Send Inquiry
Request To Call Back
Product Image (JKA-87)

Brodie Universal Lever

BRODIE UNIVERSAL LEVER Micro Teknik is manufacture, exporters & suppliers of : BRODIE UNIVERSAL LEVER Brodie Universal Lever: Levers are centered while screwing up the central screw. The stem screws into the head with various positions with adjustable spring supports, one plain lever, one notched lever with holes and one short lever.

Send Inquiry
Request To Call Back
Product Image (MTS -507)

Kelly Ball Penetration App

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (EM-208)

Water and Soil Analysis Kit for Analytical Lab

Water & Soil Analysis Kit (Cat No. - EM-208) Digital Water & Soil Analysis Kit. Display 3 Digit LCD. Range To Measure 8 Parameter; PH, Temp, D.O, TDS , Salinity, Turbidity, Conductivity, ORP.

Send Inquiry
Request To Call Back
Product Image (MTS -530)

Proctor Needle For Concrete

Price: 10 INR/Piece

Proctor Needle For Concrete: Standard Compaction Test Heavy Compaction Test Semi-Automatic Compactor Universal- Soil Automatic Compactor Soil Penetrometer Pocket Penetrometer Vicksberg Penetrometer (Proving Ring Type)

Send Inquiry
Request To Call Back
Product Image (MTS-19021)

Desauty Bridge

Desauty Bridge: Micro Teknik is manufacture, exporters & suppliers It is a simple form of bridge giving maximum accuracy while comparing capacitance in term of resistance. Three decade dials x10, x100 and 1000 ohms from one arm. The other arm has also decade dials x10, x100 and 1000 ohms. A special morse key is fitted in the centre of the two arms connecting the battery and the galvanometer. The connection are engraved on the panel which is fitted to a teak wood polished case. All the coils are calibrated on Imported Testing Bridge. Accuracy ± 0.5 to 1%. De- sauty Bridges It is a simple form of bridge giving maximum accuracy while comparing capacitance in term of resistance. Three decade dials x10, x100 and 1000 ohms from one arm. The other arm has also decade dials x10, x100 and 1000 ohms. A special Morse key is fitted in the centre of the two arms connecting the battery and the galvanometer. The connection is engraved on the panel which is fitted to a teak wood polished case. All the coils are calibrated on Imported Testing Bridge. Accuracy ± 0.5 to 1%.

Send Inquiry
Request To Call Back
Product Image (MTS-19019)

E/M By Thomson Method (Bar Magnet Method)

E/M By Thomson Method (Bar Magnet Method): MIcro Teknik is manufacture, exporters & suppliers Objective:- To study charge of an electron using Thomson Method. Features:- High Voltage Power Supply with one Meter Provided to measure the Deflection Voltage.Complete with intensity,Focus & Deflection controls. It is provided with accessories such as compass box,set of ELICO magnets,Teak wood stand with CRT mounted,Teak wood U stand with scale on both theorems for placing magnets.

Send Inquiry
Request To Call Back
Product Image (MTS-17003)

Depth Filtration

Depth Filtration: Micro Teknik - learning the fundamental principle of depth filtration by sand filters - observation of the pressure conditions in a filter bed - determination of pressure losses - plotting of Micheau diagrams - principle of backwash Specification [1] depth filtration with sand filter [2] sand filter backwash possible [3] 20 tube manometers to measure the pressures in the filter bed [4] plotting of Micheau diagrams [5] raw water and backwash pump [6] magneto-inductive flow rate sensor [7] 4 ball valves with electric drive [8] measurement of flow rate, differential pressure, system pressure and temperature [9] filter velocity adjustable Technical Data Sand filter - outer diameter: 200mm - inside diameter: 150mm - height: 1660mm Raw water pump - max. flow rate: 13m³/h - max. head: 10m Backwash pump - max. flow rate: 3m³/h - max. head: 37m Tanks for raw water and treated water - capacity: each 180L Measuring ranges - flow rate: 0...1300L/h - tube manometers: 20x 0...1500mmWC - differential pressure: -1...1bar - system pressure: 0...4bar - temperature: 0...100C - filter velocity: 0...70m/h

Send Inquiry
Request To Call Back
Product Image (MTS-9017)

Exhaust Gas Analysing Unit

Exhaust Gas Analysing Unit: Micro Teknik [1] exhaust gas analysis unit for engines [2] menu-based display for calibration, operation and displaying measured values [3] temperature sensor for measurement of engine oil temperature [4] USB interface Technical Data Measuring ranges - CO: 0...10% vol. - CO2: 0...20% vol. - O2: 0...22% vol. - HC: 0...2500ppm vol. - lambda: 0...9,999 - oil temperature: 0...130C - accuracy classes 1 and 0 Working temperature: 5...45C

Send Inquiry
Request To Call Back
Product Image (MTS-9014)

Brake Unit 75kW for 4 Cylinder Engines

Brake Unit 75kW for 4 Cylinder Engines: Micro Teknik Technical Description Setting up a power test stand for internal combustion engines with a power output of up to 75kW requires two main components: The control and load mechanism and a choice of test engine: petrol engine or diesel engine. The engine to be investigated is connected to the using a coupling with a jointed shaft. The main function to provide the required braking power, which is generated by an air-cooled eddy current brake. The braking torque can be precisely adjusted using the exciting current. It is measured indirectly using a force transducer. For this purpose, the entire brake system is mounted in floating bearings. On the base frame there is a quietening vessel with an intake air duct for the combustion air. The quantity of air taken in is measured in the duct. The rotating control cabinet contains digital displays for speed, torque, volumetric flow of the intake air and temperatures (exhaust gas, oil, cooling water - inlet and outlet - fuel, intake air). Data is transmitted between the brake unit and the engine via a data cable, which connects the control cabinets for the two units. All measuring signals are present in electrical form and can be stored and processed using the PC data acquisition function supplied. Data is transmitted to the PC using a USB interface. In addition to the standard safety features (e.g. oil pressure, temperature limiter), the brake unit contains a limit switch to monitor whether the brake and the engine are correctly connected.

Send Inquiry
Request To Call Back
Product Image (MTS-9013)

Universal Drive and Brake Unit

Universal Drive and Brake Unit: Micro Teknik is manufacture, exporters & suppliers Technical Description The is core component of a modular series of equipment that allows experiments to be performed on a variety of engines and machines, e.g. pumps, turbines or combustion engines. The machine or engine to be tested is connected to the using a V-belt drive. The is attached to the machine or engine using toggle-type fasteners. The main function of to provide the required drive or braking power to perform experiments on the selected engine or machine. This power is generated by an air-cooled asynchronous motor with a frequency converter. The energy that is created when braking in generator mode is converted into heat by a load resistor. The drive or braking torque can be precisely adjusted. It is measured indirectly using a force transducer. For this purpose, the asynchronous motor is mounted in floating bearings. A carriage on which the “engine and force transducer unit can be moved acts as a tensioning device for the V-belt. The contains digital displays for speed and torque. Data is transmitted between and the engine or machine via a data cable, which connects the control cabinets for the two units. All measuring signals are present in electrical form and can be stored and processed using the PC data acquisition function supplied for the engine or machine. Data is transmitted to the PC using a USB interface.

Send Inquiry
Request To Call Back
Product Image (MTS-9007)

Two Stroke Petrol Engine

Two Stroke Petrol Engine: Micro Teknik The open construction for easy visualization of the concept of working of a two stroke, air-cooled petrol engine. All parts made of metal. Shows functioning of various parts of the engine, such as cylinder-piston, crank, carburetor, fuel supply etc., and conversion of linear motion of piston rod to the circular motion at the crankshaft. Simulated ignition through spark plug is shown by an indicator lamp. Color coded 4mm socket terminal provided on the base for power input to the indicator lamp. Its important components and functioning explained on the keycard mounted at the base.

Send Inquiry
Request To Call Back
Product Image (MT-798)

Optical transducer

  • Color:Black Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTK-3028B)

Digital Wave Analyzer

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTK-316)

Resistor Resistor

  • Color:Multicolor
  • Material:Nickel-chromium alloy
  • Power Source:Electric
  • Usage:Electrical Industry
  • Voltage:12 Volt (v)
Send Inquiry
Request To Call Back
Product Image (MTS-724)

Fuel Cell System

  • Dimension (L*W*H):1750x780x1770 Millimeter (mm)
  • Material:Mild Steel
  • Power Source:Electric
  • Temperature Range:5-55 Celsius (oC)
  • Usage:Laboratory Equipment
  • Voltage:20-40 Volt (v)
  • Warranty:Yes
  • Weight:180 Kilograms (kg)
Send Inquiry
Request To Call Back
Product Image (MTE-776)

Starting Resistor Unit

  • Color:Silver
  • Frequency:50 Hertz (HZ)
  • Power Source:Electric
  • Usage:Electrical industry
  • Voltage:1000-1100 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-150T)

Thermotubes the Marie Bath Without Water and Without Risk

  • Color:Orange
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Product Type:Thermotubes the Marie Bath Without Water and Without Risk
  • Usage:General Lab Equipments
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTE-PHM4)

Pocket Ph- Meter

  • Color:Red Black
  • Display Type:Digitel
  • Material:Plastic
  • Operate Method:Battery
  • Power Source:Battery
  • Usage:General Lab Equipments
  • Warranty:1 Year
  • Weight:20-50 Grams (g)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (JEQ-16)

Kjeldahl Distillation Unit

Kjeldahl Distillation Unit (Without glass parts) : is useful for distillation purposes in 300 & 500 ml capacity flasks. Provided with condenser rack. It works on 220V AC 50Hz. 3-tests mantle type with 3 energy regulators. 6-tests mantle type with 6 energy regulators. Kjeldahl Distillation Unit : JEQ-16A : Useful for estimation of Nitrogen contents in substances by digestion in 300 & 500 ml flasks. Provided with Lead fume duct and pair of hangers. It works on 220V AC 50Hz single phase. JEQ-16B : Provided with two sets of mantle type heating platforms-one for digestion and other for distillation. Complete with condenser rack, lead fume duct and a pair of hangers, on a mild steel sheet tubular stand. Both units supplied with individual energy regulators. It works on 220V AC 50Hz. Note : Glassware for above all at an extra cost.

Send Inquiry
Request To Call Back
Product Image (MTS-22316)

Plastic Limit Set

Plastic Limit Set Plastic limit Set manufacturer and plastic limit ste Exporter of Soil testing Equipment for Engineering college Students. Use: Performing plastic limit test Standard: ASTM D4318, AASHTO T90, BS 1377:2 Specifications of Plastic Limit Set 1 Plastic Limit Plate. 1 25 ml Graduated Cylinder. 1 Mixing Dish. 1 Doz Aluminum moisture cans 1 Flexible Spatula. 1 Rod Comparator: 3 mm diameter Accessories Evaporating Ground Glass Plate 305x305x10mm (12x12x3/8in) with seamed edges 24 aluminum containers 51x22mm (2in dia. x 0.9in H) with snug-fitting lids,Wash pan Wooden-handled spatula with stainless steel blade 19x102mm, WxL, 24 250ml polyethylene squeeze wash bottle

Send Inquiry
Request To Call Back
Product Image (JST-2)

Seed Germinator Double Chamber

Seed Germinator Double Chamber has specifications same as single chamber and also consists of following points:- Each chamber size : 555 (W) x 910 (H) x 605 (D) mm. For cooling (Low temp.) 5 C to 50 C ± 1 C a sealed compressor unit has been provided to work independently below the chamber. JST - 2A : Heating & Cooling in separate chambers. JST - 2B : Heating & Cooling in both chambers. Optionals : Digital temp. indicator-cum-controller with computer data logger. Automatic 0-24 hrs. Timer to regulate cyclic illumination conditions. Chart recorder. Automatic voltage stabilizer - 3 KVA (Must).

Send Inquiry
Request To Call Back
Product Image (JKA-51)

Long Paper Smoker And Varnisher

LONG PAPER SMOKER & VARNISHER Micro Teknik is manufacture, exporters & suppliers of : LONG PAPER SMOKER & VARNISHER Long Paper Smoker & Varnisher consists of following features:- Hand driven with wall fixing arrangement Motor driven Portable Stand : To carry Long Paper Smoker & Varnisher-with castors Drying Stand Circular : Stainless Steel for 24 papers, portable, space saving JKA-51A :LONG PAPER SMOKER & VARNISHER Motor Driven. JKA-52 : PORTABLE STAND To carry long paper Smoker & Varnisher -with castors. JKA-53 : DRYING STAND CIRCULAR Stainless steel for 24 papers, portable, space saving. TEKNIK TIME RECORDING DEVICES : JKA-60 : TUNING FORK N-100 with stylus. JKA-62 : TIME MARKER : Electrical, double magnet, single marker. JKA-63 : TIME MARKER : Electrical, double magnet, double marker.

Send Inquiry
Request To Call Back
Product Image (JEQ-12B)

RECTANGULAR (Stainless steel top)

RECTANGULAR (Stainless steel top) Round Hot Plates : The body is made of PCRC sheet duly painted. Heating plate diameter is of 8" of cast iron with heating elements of 1.5 KW rating. Temp. is controlled by energy regulator / thermostat. Types:- Single plate. Double plate with individual energy regulators. Digital Temp. indicator-cum controller.

Send Inquiry
Request To Call Back
Product Image (JEQ-6C)

Compact Laboratory Centrifuge

Compact Laboratory Centrifuge Compact Laboratory Centrifuge has a compact rectangular body made of mild steel duly powder coated, with clear acrylic lockable lid, continuously variable speed regulator, safety fuse, pilot lamp etc. provided on streamlined panel. With plug-cord to work on 220V AC 50Hz single phase. Maximum speed 4000 RPM. A special safety mode is provided that when lid is open instrument will stop working. Capacity (ml.): 4 x 50. 6 x 50. 8 x 15. 12 x 15. 16 x 15. Optional : Automatic 0-60 minutes Timer. Speedometer Digital. Maximum speed 10000 can also be provided.

Send Inquiry
Request To Call Back
Product Image (JEQ-18)

Tissue Homogenizers

Tissue Homogenizers Tissue Homogenizers is an electrical stainless steel rod with Ptfe paste and replaceable grinding vessel of borosil glass. Fitted with 1 / 20 H.P. motor with 4000 RPM with a speed regulator stirring rod 8 mm x 325 mm long fitted with drill chuck. Unit fitted on heavy cast-iron base. It can be raised and lowered in height. Complete with plug-cord etc. It works on 220V AC 50Hz single phase. Capacities Available : 10ml 15ml 30ml 50ml 100ml

Send Inquiry
Request To Call Back
Product Image (JRS-06D)

Vaccine Deep Freezer

Vaccine Deep Freezer Specially designed for quick freezing and storing of biological medical specimens, clinical samples, blood components, serum, vaccines etc, at low temperature. Features: Temperature range: -20 C, -30 C, -40 C, -70 C, -80 C . Available in horizontal or vertical designs. It works on 220V AC 50Hz single phase. Capacity : 55 ltr / 2 cu ft. 120 ltr / 4.5 cu ft. 170 ltr / 6 cu ft. 280 ltr / 10 cu ft. 425 ltr / 15 cu ft. 650 ltr / 23.5 cu ft. Optional : Digital temp. indicator-cum-controller with computer data logger.

Send Inquiry
Request To Call Back
Product Image (JEQ-6D)

Refrigerated Centrifuge

Refrigerated Centrifuge Refrigerated Centrifuge has a streamlined rectangular body with elegant panel and clear acrylic lockable lid. Complete with pilot lamp, continuously variable speed regulator, Digital speed-indicator, plug-cord to work on 220V AC 50Hz single phase. A hermetically sealed compressor for cooling from ambient to -20š C. Temperature controlled by Digital Temp. Controller cum Indicator with accuracy š±0.50šC. Maximum speed 5000 RPM. The centrifuge has an electrical interlock to ensure that the unit can not run with cover open. Available Capacity: 8 x 15 ml. 12 x 15 ml. 16 x 15 ml. 12 x 1.5 ml. 16 x 1.5 ml. 8 x 50 ml. Optional : Automatic Voltage Stabilizer 2 KVA. Note : Use of suitable Voltage stabilizer is a must.

Send Inquiry
Request To Call Back
Product Image ( JRC-04)

Low Temperature Cabinets

Low Temperature Cabinets/Quick Freezer/ Deep Freezer / Cooling Compartment: These quick freezers are designed for quick freezing and storing of blood components. Serum, vaccines. Biological and medical specimens. Clinical samples etc. at low temperatures. These freezers are with specially engineered superior insulation and specially designed refrigeration system. Constructed of double walls, the exterior is made of sheet steel powder coated colour combination while the interior of stainless steel having puf insulation to minimize heat loss.Capillary controlled balanced hermetically sealed refrigeration is most economical, trouble free and exceptionally quiet. Temperature controlled by digital electronic indicator-cum-controller. Counter balanced door provided for easy access to chamber and inside acrylic door to avoid temperature loss. Features: Temperature range: 20C, 30 C, 70 C . Available in horizontal or vertical designs. It works on 220V AC 50Hz single phase. Capacity : 55 ltr / 2 cu ft. 120 ltr / 4.5 cu ft. 170 ltr / 6 cu ft. 280 ltr / 10 cu ft. 425 ltr / 15 cu ft. 650 ltr / 23.5 cu ft. Optional : Digital temp. indicator-cum-controller with computer data logger.

Send Inquiry
Request To Call Back
Product Image (JEQ-16B)

Kjeldahl Distillation and Digestion Unit

Kjeldahl Distillation & Digestion Unit Provided with two sets of mantle type heating platforms-one for Digestion and other for Distillation. Complete with condenser rack, lead fume duct and a pair of hangers, on a mild steel sheet tubular stand. Both units supplied with individual energy regulators. To work on 220 V AC 50 Hz single phase. (i) 3 tests mantle type with 3 energy regulators. (ii) 6 tests mantle type with 6 energy regulators. Note : Glassware for above all at an Extra Cost.

Send Inquiry
Request To Call Back
Product Image (MTS-5048)

Pictorial Numbers (Wooden)

Pictorial Numbers (Wooden) Micro Teknik We are counted amongst the reckoned names in the industry, offering wide range of Pictorial Numbers (wooden) that are appreciated among the clients for smooth surface and excellent finishing. Our entire product range is durable in nature and is able to cater the individual requirements in most efficient manner. Owing to its exceptional quality attributes our entire product range is treasured in the global market. Features: Abrasion resistant Durable Reasonable price

Send Inquiry
Request To Call Back
Product Image (JEQ-4O)

Orbital Shaking Incubator

Orbital Shaking Incubator Orbital Shaking Incubator: Specially designed to have a combined operation of Incubation and shaking as well as integral shaker mechanism, eccentric orbital drive provides horizontal orbital motion agitation. Incubator is double walled. Exterior of mild steel finished in powder coated. Interior made of stainless steel. Chamber illumination with fluorescent light. Glass-wool insulation between the two walls. Temperature is controlled by Digital Display Temperature Controller cum Indicator. Forced air circulation is provided. The platform is mounted on heavy duty springs with lotus clamps and S.S. top. Speed is continuously variable from 50 to 250 RPM and displayed on a Digital Speed Meter (optional). It works on 220V AC 50Hz single phase. Temperature Range : Ambient +5 C to 600C Capacity Flasks 250 ml 9 250 ml 16 250 ml 25 250 ml 36 500 ml 9 500 ml 16 500 ml 25 500 ml 36 Optional : Digital Speed Meter Digital Timer of 999 minutes Digital temp. indicator-cum-controller. Digital temp. indicator-cum-controller with computer data logger. JEQ-4 (OR) : Temperature range is 5 C to 60 C.

Send Inquiry
Request To Call Back
Product Image (JEQ-4S)

Stability Chamber Microprocessor Control

Stability Chamber Microprocessor Control Environmental Test Chamber / Growth Chamber / Stability Chamber Microprocessor Control : These are Microprocessor Controlled Chambers with soft touch keyboard for fast and accurate setting of various parameters. Just set the temp., humidity & time and the system runs automatically. All the parameters are digitally displayed and reproducible. Special Features: Temp. accurately controlled through microprocessor based controller Automatic On / Off of the compressor according to need of process to reach & maintain the set values Chamber illumination with fluorescent or ultra violet lights Audio Visual alarm warning of temp. variation Users friendly Microprocessor Design/Operation Additional Features of Environmental Test Chambers : Humidity accurately controlled through microprocessor controller in addition to temperature Direct display of humidity in % RHQ. Audio visual alarm warning of low water levels & door opening Humidity : 40% to 95% ± 3% Technical Data: Capacity Temperature Range 170 lit. / 6 cft 5 C to 60 C ± 1.0 C 285 lit. / 10 cft 5 C to 60 C ± 1.0 C 340 lit. /12 cft 5 C to 60 C ± 1.0 C 170 lit. / 6 cft Ambient to 70 C ± 1.0 C 285 lit. / 10 cft. Ambient to 70 C ± 1.0 C 340 lit./ 12 cft Ambient to 70 C ± 1.0 C Optional: Chart Recorder weekly RS-232C interface available for humidity control through personal computer Digital temp. indicator-cum-controller with computer data logger Cyclic timer for regulating illumination conditions Automatic Voltage Stabilizer 3 KVA

Send Inquiry
Request To Call Back
Product Image (JEQ-3C)

Vacuum Oven

Vacuum Oven Features for Vacuum Oven : Double walled construction. Inner round chamber made of stainless steel sheet. Outer made of Mild steel sheet. Gap filled with glass wool for Temp. insulation. temp. Range50š C to 150š C š± 3š C. Body capable of withstanding vacuum of 760mm. Complete with temperature regulator, indicator lamp, on-off switch, cord-plug etc. To work on 220V AC 50Hz single phase. Without vacuum pump. Chamber size in mms : diameter x depth. (i) 250 x 250 (ii) 250 x 300 (iii) 300 x 300 Optional : Digital temperature indicator-cum-controller.

Send Inquiry
Request To Call Back
Product Image (MTS-5042)

Tangram Puzzle (Acrylic)

Tangram Puzzle (Acrylic): Micro Teknik Popularly known as chinese puzzle.

Send Inquiry
Request To Call Back
Product Image (MTS-5040)

Add and Count Rods (Wooden)

Add & Count Rods: (Wooden): Micro Teknik Set comprising 32 pcs of different size of rod and counting 1-10 is printed on the rod. This will help the child to count, learn numbers 1-10 and addition & subtraction.

Send Inquiry
Request To Call Back
Product Image (JEQ-2C)

Temperature and Precision Control Water Bath

Temperature and Precision Control Water Bath : constructions of Water bath but its temperature controlled by solid state controller with stirrer with S.S. rod & blade to make temp. of bath all-round uniform and constant. Water bath chamber made of stainless steel sheet. Temperature range: 50šC above ambient to 100šC. Chamber size : 430 x 240 x 265 mm

Send Inquiry
Request To Call Back
Product Image (MTS-5038)

Fractions Of Square (Wooden)

Fractions Of Square (Wooden): Micro Teknik is manufacture, exporters & suppliers

Send Inquiry
Request To Call Back
Product Image (MTS-5037)

Fractions Of Circle (Wooden)

Fractions Of Circle (Wooden): Micro Teknik is manufacture, exporter & suppliers

Send Inquiry
Request To Call Back
Product Image (MTS-5036)

Circle Fraction Disk

Circle Fraction Disk: Micro Teknik Showing different fractions of circle.

Send Inquiry
Request To Call Back
Product Image ( JP-13)

Slide Storage Cabinet

SLIDE STORAGE CABINET : Cabinet fabricated out of thick board. Exterior clad in laminated sheet.Drawers and slide holding grooves made of seasoned Teakwood/aluminium serially numbered. Each drawer has index card and puller knobs. An extra drawer has been provided at bottom for keeping index cards etc. Dust proof door has locking arrangement. Capacity : 1000 2000 3000 5000 slides

Send Inquiry
Request To Call Back
Product Image (JP-10)

Tissue Wax Block Storage Cabinet

Tissue Wax Block Storage Cabinet Tissue Wax Block Storage Cabinet is made out of duro-board, externally clad in laminated sheet. Dust-proof door is lockable. It is provided with smoothly sliding drawers with sixteen compartments each of size 4 x 4 x 2" and have puller knobs. Each compartment can store blocks in two rows. Capacity Available: 4 Drawers2000 Block 6 Drawers3000 Block 10 Drawers5000 Block Cabinet Capacity: upto 20,000 blocks can be fabricated.

Send Inquiry
Request To Call Back
Product Image (MTS-5035)

Derivation Of Value Of Pie (Wooden)

Derivation Of Value Of Pie : (Wooden): Micro Teknik is manufacture, exporters & suppliers

Send Inquiry
Request To Call Back
Product Image (MTS-5032)

Polyhedron and Their Nets Acrylic

Polyhedron & Their Nets (Set of 11) : (Acrylic): Micro Teknik is manufacture, exporters & suppliers

Send Inquiry
Request To Call Back
Product Image (MTS-5021)

Office Working Equipment

Office Working Equipment: Micro Teknik Business Icon Card Design Phone Icons Office Clock Template Flat Laptop Graphic Envelope Layout Tablet Mouse Coffe Elements Illustration Suitcase Graphics Element Clipboard Image Set Objects Collection Smarphone

Send Inquiry
Request To Call Back
Product Image ( JP-29)

Slide Mounter

Slide Mounter A Slide Mounter can be used for several things. If you ve got a diatom test slide from Klaus Kemp you will note a small finder ring around the 8 diatoms to help locate them quickly. In addition, the edge of the round cover slip is sealed to the slide very neatly, again using a ringer.On cover slips that I ring, I let the dark colored edge sealant dry, then add a thin white ring on top to allow identifying the top of the slide while not wearing glasses. Another use is making support rings to prevent crushing a specimen when applying the cover slip. This was my original motivation since I wanted to make whole mounts of deer ticks without mashing them in the process. I tried using punched paper (lots of stray fibers) and punched tape (melted by xylene in the mountant) with poor results; shellac rings are easy to make and work very well.

Send Inquiry
Request To Call Back
Product Image ( JP-2)

Tissue Flotation Bath

Tissue Flotation Bath Micro Teknik is manufacture, exporters & suppliers of : Tissue Flotation Bath Useful to float tissue wax sections to flatten for staining process. Double Walled chamber, inner made of black anodised aluminiumand outer wall made of Mild steel sheet duly painted. Gap between two insulated with glass wool.Temperature ambient to 70šC š± 20C controlled by a thermo state. Supplied complete with pilot lamp, Temp. Control Knob, cord-plug etc. to work on 220V AC 50 Hz single phase. Chamber Size : Dia. 225 mm, Depth. 70 mm, Rim. 40 mm.

Send Inquiry
Request To Call Back
Product Image (JCR-1B)

Cryostat Microtome

Cryostat Microtome Cryostat Microtome :Most versatile section cutting machine for quick sectioning of tissues. Instantly freezes on built-in rapid freeze stage for biological, veterinary and medical diagnostic biopsies etc. The Microtome is completely made of brass & stainless steel and is placed in stainless steel cold chamber with an observation glass window. Provided with a hermetically sealed compressor unit with A grade components to achieve quick cooling of up to-500 C. It is provided with feed range from 0-40 microns in steps of 2 microns each. Accessories supplied with equipment:- Razor-120 mm with back & handle-one. Object holder-set of three. Honing Stone-one. Oilcan with low temperature-one. Dust cover-one.

Send Inquiry
Request To Call Back
Product Image (MTS-5019)

Senior Maths Lab Kit

Senior Maths Lab Kit: Micro Teknik Geo Board-Circle (Wooden) Circle Fraction Disk Set of Cups (Volumetric) (Plastic) Mensuration Kit (Acrylic & Wooden) Charts (Set of 16) 50x75cms Laminated Optical Square (Metal) Cross Staff (Metal) Standard Time Indicator Measuring Tape-15 mtrs. Geometry Box-Canvas Bag Geometrical Shapes 5x10cms (Coloured) (Set of 12) Geometrical Shapes 5x15cms (Coloured) (Set of 12) Volume Relationship Set (Crystal Plastic) Measuring Jugs & Beakers (Plastic) Probability Kit Geometry Kit (Acrylic) Magnetic Graph Co-ordinate Board with Marker (Acrylic) Power of two Perpendicular Line Segment is the Shortest (Acrylic) Triangle Kit (Acrylic) Ratio of Area of Similar Triangles (Acrylic) Identity Set-I (Acrylic) Identity Set-II (Acrylic) Identity Set-III (Wooden) Ranging Rod (2 pcs.) (Metal)

Send Inquiry
Request To Call Back
Product Image (JP-4)

Paraffin Dispenser

Paraffin Dispenser Paraffin Dispenser Is Embedding Bath-Single Type Dispenser Which Is Double Walled, Both Made Of Stainless Steel Sheet, Gap Filled With Glass Wool For Temp. Insulation. Paraffin Dispensers Have High Heating Performance And Provide Precise Temperature Range Ambient To 70š C Controlled By Hydraulic Type Thermostat. Completely Supplied With Pilot Lamp, Temp. Control Knob, Cord-Plug Etc. To Work On 220V Ac 50Hz, Single Phase. Available In Capacity : 1 Liter, 2 Liter & 5 Liter Optional : Stainless Steel Basket.

Send Inquiry
Request To Call Back
Product Image (MT-80036)

Digital Cum Linear Ic Tester

Specification of Digital Cum Linear Ic Tester : IC tester with (x2) 40 PIN Universal sockets for testing Digital and Analog ICs from 3 till 40 pins Capacity of automatically seeking Digital ICs Non-stop test mode Integrated interlocks for protecting system and IC Integrated problem identification Switch Mode: supply of input voltage 180 to 270V, input frequency 50HZ, 1-phase. IC under test include Digital: TTL, functions.

Send Inquiry
Request To Call Back
Product Image (MT-28039)

Guillotine Shear

GUILLOTINE SHEARS Microteknik are Supplier and Manufacturer Company in india we are Exporter Guillotine Shears in india and other country cutting flat stock cleanly with a minimum of bending Specification of Guillotine Shears The shears to cut non-ferrous metals up to 2.4 mm (10 gauges) or mild steel up to 1.6 mm. High carbon steel blades precision ground and hardened- designed to make 10,000 cuts before sharpening is required. Square work surface. Open back designed with a convenient receiving table to catch cut metal and to allow for any length of sheet. All steel constructions, mount to any work surface. Feed tray, handle and cutting guide removable for storage.

Send Inquiry
Request To Call Back
Product Image (MT-80014)

Function Generator

Specification of Function Generator : Function Generator, direct digital synthesis method. Frequency sine wave range 1 MHz-10 MHz. Frequency resolution 1 MHz. 20 Vpp output OC.

Send Inquiry
Request To Call Back
Product Image (MTS-21005)

Digital Multimeter

Digital Multimeter: Micro Teknik is manufacture, exporters & suppliers Multimeter New type holster, streamline design. Large LCD makes the reading clearly. Metallic screen board with Stronger antimagnetic and anti-interferential function.

Send Inquiry
Request To Call Back
Product Image (EST-4556)

Oscilloscope .

Specification of Oscilloscope Digital storage oscilloscope. 500 MS/s real time sampling. Scale 2 ns/div-100 s/div, steps of 1, 2, and 5. Bandwidth 60 MHz. Includes USB connection, auto measuring, storage of waveform, and different trigger modes.

Send Inquiry
Request To Call Back
Product Image (MTS-16062)

Pulse Velocity Measurement

Pulse Velocity Measurement Microteknik are offering a wide range of Pulse Velocity Measurement. The method consists of measuring the time of travel of an ultrasonic pulse passing through the concrete being tested. Concrete uniformity, Check for imperfection in concrete, Concrete deterioration from fire or chemical attack, Layer thickness and modulus of elasticity, Concrete strength. Specifications of Pulse Velocity Measurement Time measurement 0.1 to 999.9 …š¼sec Ranges of 0.1 to 999.9 …š¼sec 1 to 9999 …š¼sec Accuracy š± 0.1 m sec Transmitter, pulse 1.2 k V, 500 V or 250 V, 1.5 m sec Power supply Battery: Ni-Cad rechargeable Mains: 110 š…" 240 V AC, Accessories Testing heads of nominal working frequency between 24 and 150 kHz Oscilloscopes for 110-230v, 50-60 Hz, 1 ph. Calibration rods to BS 1881:203

Send Inquiry
Request To Call Back
Product Image (MTS-5008)

Pencil Bow

Pencil Bow Micro Teknik

Send Inquiry
Request To Call Back
Product Image (MTS-5005)

Pantagraph .

Pantagraph: Micro Teknik is manufacture,exporters& suppliers most improved quality. For enlarging or reducing diagrams, in wooden box size : 60 cm 75 cm 90 cm.

Send Inquiry
Request To Call Back
Product Image (MTS-5003)

Foot Rulers Plastic

Foot Rulers Plastic: Micro Teknik Size 12(30 cm) Size 24(60 cm) Size 40(100 cm)

Send Inquiry
Request To Call Back
Product Image (MTS-5002)

Chemistry Lab Instruments

Chemistry Lab Instruments: Micro Teknik Laboratory works are one of the reason why we can cure diseases and discover more kinds of Earthly wonders. Be a Scientist now! take note all the following sites that will give you the best Lab Equipment and Chemicals.

Send Inquiry
Request To Call Back
Product Image (MTS-101303)

Reciprocating Pump

Reciprocating Pump: Micro Teknik

Send Inquiry
Request To Call Back
Product Image (MTS-101294 )

Air or Steam Pressure Turbine

Air or Steam Pressure Turbine: Micro Teknik This is an all metallic two stage working model, properly constructed. The rotor with shaft is on ball bearings. The unit is provided with transparent plastic cylinder to observe inner view of the turbine while working. Complete on cast iron base. In place of steam, use of air generated by compressor is suggested.

Send Inquiry
Request To Call Back
Product Image (MTS-101264)

Venturi Meter

Venturimeters Cast Iron: Micro Teknik Made of cast iron with gun metal bushes. The ends are flanged which can be easily connected of pipe line. They are made of the following sizes of pipes having Internal diameter. (A) 25 mm (b) 38 mm (c) 50 mm An educational Venturi tube that allows students to study the Venturi meter and Bernoullis Theorem and to make direct comparisons between the results obtained by experimentation and those predicted by theory. A Venturi meter is used to determine the flow rate of fluid in a pipe. Venturi Meter is comprised of a horizontal Venturi tube, a downstream flow-control valve and eleven pressure tappings connected to water manometers (piezometers). A common manifold above the piezometers includes an air pressure control valve. The inclusion of eleven piezometers allows study of the pressure distribution along the convergent-divergent passage within the Venture tube. The is designed for use with the Gravimetric or Volumetric Hydraulics Benches (available separately). These benches measure absolute flow rate which can be used by students to find the Venturi meter coefficients over a range of flow conditions. The Venturi meter is a device used to measure the flow rate. As shown, it consists of a tapering contraction section, along which the fluid accelerates towards a short cylindrical throat, followed by a section which diverges back to its original diameter. As velocity increases from the inlet section to the throat, there is a fall in pressure, the magnitude of which depends on the rate of flow. The flow rate may therefore be inferred from the difference in pressure, as measured by pizometers placed upstream and at the throat. The device is used to determine the discharge coefficient or the Venturi meter coefficient (C).

Send Inquiry
Request To Call Back
Product Image (MTS-17889)

Riffle Boxes

Riffle Boxes Microteknik are manufacturer and Exporter of Civil engineering Equipment for engineering collge. Riffle Boxes. These sample dividers are constructed of heavy gauge sheet metal finished in an easy clean powder coated paint and are supplied in a range to meet the requirements Use: Aggregate sampling To divide aggregates into a representative sample increment for testing.

Send Inquiry
Request To Call Back
Product Image (MTS-803P)

PLATE ROLLING MACHINE

PLATE ROLLING MACHINE 3 Roll assymmetrical mechanical Plate Bending M/c Capacity: 4mm x 2500mm without pre-punching.

Send Inquiry
Request To Call Back
Product Image (MTS-44563)

MECHANICAL TECHNOLOGY SETUP TRAINER

MECHANICAL TECHNOLOGY SETUP TRAINER It is composed of various mechanical modules, each module can be used for independent operation,or combined operation.

Send Inquiry
Request To Call Back
Product Image (MTS-18002)

Full Scale Sewerage System

Full Scale Sewerage System: Micro Teknik is manufacture, exporters & suppliers Technical Description This full-scale unit contains a comprehensive sewerage pipe system with many branches fabricated using high quality glass laboratory pipes. Using this unit the flow and pressure can be investigated at various junctions, pipe offsets, changes in cross-section and at siphons under varying ventilation situations. Elevated tanks can be emptied using a remote control so that a realistic flow of waste water can be produced. The unit has a closed water circuit with pump and tank. A supply of three-phase mains electricity and compressed air is required for operation.

Send Inquiry
Request To Call Back
Product Image (MTS-18003)

Protection of Drinking Water Training Panel

Protection of Drinking Water Training Panel: Micro Teknik is manufacture, exporters & suppliers Technical Description An open pipe system that simulates a domestic installation for drinking water with four different levels is mounted on the training panel. The levels represent the cellar (drinking water connection level) and three floors. It is possible to simulate a pipe fracture or a pressure drop. During this process the return of contaminated water into the drinking water pipe can be observed. A water supply is necessary for operation. The training panel can be fitted to the Universal Stand.

Send Inquiry
Request To Call Back
Product Image (MTS-5055)

Cross Staff

Cross Staff: Micro Teknik To draw perpendicular lines in the ground.

Send Inquiry
Request To Call Back
Product Image (MTS-PA1105)

Air Permeability Apparatus

Air Permeability Apparatus Empowered by our levels of exquisite professionals, we are involved in offering a wide range of Blain Air Permeability Apparatus. This product is manufactured using latest techniques and optimum quality raw material in order to maintain its adherence to universally accepted standards. Besides this, the offer qualitative product is tested by our quality controllers on various parameters in order to ensure its operational fluency. Moreover, our apparatus is vastly demanded in domestic markets. Features: Durability Compact design Optimum quality

Send Inquiry
Request To Call Back
Product Image (MTS-CP1104)

Centrifugal Pump .

Centrifugal Pump Test Rig Apparatus Set up consists of a centrifugal pump coupled with electrical motor, supply tank,measuring tank & pipe fittings for closed loop water circulation. Pressure and vacuum gauges are connected on delivery and suction side of pump for the purpose of measurement. The flow rate of water is measured using measuring tank and stop watch provided. Experiments: to determine overall efficiency and pump efficiency of to plot head vs. Discharge, pump efficiency vs. Features: closed loop water circulation compact & stand-alone set up stainless steel tanks and wetted parts superb painted structure simple to operate & maintain RANGE OF EXPERIMENTS: These are Following characteristics can be studied at different Speeds. Discharge V/S Head. Discharge V/S Input to pump. Discharge V/S Pump efficiency. Calculate the output of the pump, given the discharge and the total head. Calculate the input Calculate the efficiency.

Send Inquiry
Request To Call Back
Product Image (MTS-HP1103)

Hydrostatic Pressure Testing Equipment

Hydrostatic Pressure Testing Equipment Our organization is regarded among the top most manufacturers, wholesalers and exporters of optimum quality of Hydrostatic Pressure Testing Equipment. Pressure Range : 0 100 kg / cm sq Pressure Range : 0 100 kg / cm sq Time totalizer : Digital presettable with range upto 999.9 hours. No. of station : 3 nos Pressure input : Through compressed air having pressure upto 5 kg / cm sq. Pressure output : Through hydro-pneumatic pump. Panel mounting : Trolly with caster wheel. Paint : Powder coated. Power : 230V, 50 Hz single phase.

Send Inquiry
Request To Call Back
Product Image (MT-101417A)

Free and Forced Vortex

Free and Forced Vortex Apparatus Free and Forced Vortex Flow apparatus offered by us has been painstakingly designed by our team of expert professionals. This apparatus enables the researchers to determine the shape of the vortex profile. With the accuracy of the results it provides, this apparatus is very popular in the market. Created using optimum quality materials and cutting edge technology, this delivers flawless performance. We subject it to quality tests based on multiple parameters before making it available to the customers. Range Of Experiments To visualize the forced & free vortex phenomenon. To plot the shape of vortex profile i.e. vertical height vs horizontal radius.

Send Inquiry
Request To Call Back
Product Image (MTS-22013)

Steam Generator

Steam Generator: Micro Teknik is manufacture, exporters & suppliers Technical Description The electrically heated steam generator is intended to be used to supply and requires only a drain connection. An exhaust flue is not necessary. The steam generator is type approved and does not need any specific permission for operation according to German regulations. Function is fully automatic. The short warm up time until steam is output makes extensive experiments possible in a short time. Comprehensive safety equipment ensures safe operation in all circumstances.

Send Inquiry
Request To Call Back
Product Image (MTS-22012)

Steam Turbine Module

Steam Turbine Module: Micro Teknik is manufacture, exporters & suppliers Thermodynamic view of cyclic process - Energy balances and determination of efficiencies - Operating behaviour - Plant operation - Automation - Maintenance Components of a steam power plant - Turbine - Piston steam engine - Auxiliary equipment - Feed water treatment - Steam generator

Send Inquiry
Request To Call Back
Product Image (MTS-22010)

Two Shaft Gas Turbine Simulator

Two Shaft Gas Turbine Simulator: Micro Teknik is manufacture, exporters & suppliers Technical Description Nine different process parameters can be set using potentiometers on the front panel of the benchtop unit. The software provides a wide range of diagrams and graphs. The simulator can model the theoretical system limits without hazard, limits at which real systems would be destroyed or seriously damaged. The unit comprises a control panel, data acquisition card and software..

Send Inquiry
Request To Call Back
Product Image (MTS-22009)

Jet Turbine Module

Jet Turbine Module Micro Teknik is manufacture, exporters & suppliers Technical Description Using the behavior of a jet turbine can be studied. Jet turbines are used on aircraft for propulsion due to their low weight and their high performance. The gas turbine is a single-shaft jet engine with radial compressor and axial turbine. Compressor and turbine are of single-stage design. The intake volumetric flow rate is measured using a measuring orifice. The thrust force is measured using an electronic force sensor. The turbine is started fully automatically with the aid of an electric starter. PC data acquisition with evaluation software permits online logging and graphical representation of all relevant process variables.

Send Inquiry
Request To Call Back
Product Image (MTS-22008)

Two Shaft Gas Turbine

Two Shaft Gas Turbine: Micro Teknik is manufacture, exporters & suppliers FEATURES Self-contained complete teaching facility Designed for safe easy operation with low noise levels Data logging option available for all measured variables Comprehensive controls and instrumentation displayed in multi-colour flow diagram EXPERIMENTAL CAPABILITY Allows an extensive programme of experiments in Gas Turbine technology including: Performance of a simulated single shaft unit Performance of a single shaft unit with nozzle simulated load ( with thrust nozzle option - availability on request). Performance of a two shaft unit Characteristics of individual components: - gas generator compressor - combustion chamber characteristics - power turbine characteristics

Send Inquiry
Request To Call Back
Product Image (MTS-22006)

Air Compressor Test Unit

Air Compressor Test Unit: Micro Teknik is manufacture, exporters & suppliers Technical Description The compact bench top unit contains all the essential components of a compressor system. The compressor to be tested is a single-stage single-cylinder machine. During the functional test the efficiency of the compressor is investigated against the increasing pressure in the tank over time. The power consumption of the drive motor is displayed on the switch box. A stopwatch is supplied for time-related measurements.

Send Inquiry
Request To Call Back
Product Image (MTS-22004)

Single Stage Compressor Module

Single Stage Compressor Module Micro Teknik is manufacture, exporters & suppliers Technical Description The experimental module enables investigations and experiments to be performed on a single-stage compressor system. The compressed air generated is stored in a tank and is available as working medium. The Universal Drive and Brake Unit is required to operate the experimental module. It contains the motor that drives the module via a V-belt. Speed and torque measurements are also integrated. The system is equipped with electronic sensors for pressure, flow rate, speed and temperature measurements which facilitate PC data acquisition. The measured data can be transmitted to a PC for further processing.

Send Inquiry
Request To Call Back
Product Image (MTS-22003)

Two Stage Air Compressor Simulator

Two Stage Air Compressor Simulator Micro Teknik is manufacture, exporters & suppliers Technical Description This experimental unit allows variables that affect the process (such as capacity, dead space, flow rate and state of the intake air) to be adjusted from the panel. The simulator can model operating states up to the theoretical limits. The significance of the dead space and air re-expansion thus becomes clear. The measured values are transmitted directly to a PC via USB. The data acquisition software is included. Learning Objectives / Experiments - basic principles of the multistage compression process - special features of a multistage compressor - thermodynamic state variables - depiction of a compression process on a T-s diagram and on a p-V diagram - condensation in the intercooler and aftercooler - on-off pressure control with hysteresis Features * Simulated compressor system with intermediate cooling and aftercooling

Send Inquiry
Request To Call Back
Product Image (MTS-22002)

Two Cylinder Steam Engine Module

Two Cylinder Steam Engine Module Micro Teknik is manufacture, exporters & suplliers Technical Description The forms a complete steam power plant with the matched steam generator and the Universal Drive and Brake Unit. Heat energy is initially converted into mechanical energy and then into electrical energy by the operating as a dynamometer. The experimental module contains a steam engine, a condenser and a condenser tank together with comprehensive instrumentation. The steam engine is an enclosed two-cylinder machine with 180 crank offset. It is of single action with plunger pistons. The condensate tank is designed as a cascaded tank and separates oil from the steam engine. The clean condensate is pumped back to the feed water tank of the steam generator. A supply of cooling water is required for operation.

Send Inquiry
Request To Call Back
Product Image (MTS-22001)

Throttling Calorimeter

Throttling Calorimeter Micro Teknik is manufacture, exporters &suppliers Technical Description Both very large and very small water contents can be determined with precision by means of the two-stage process. For the direct determination of high water contents of x = 0.5 and below the separating calorimeter is used. High vapour contents between approx. x = 0.95 and x = 1.0 can be determined indirectly using the throttling calorimeter. The vapour is adiabatically expanded and transferred to superheated steam. The quality can then be determined with the aid of the h-s diagram. A supply of mains electricity and water are required for the operation of the unit. Steam up to max. 10bar and 240C can be investigated.

Send Inquiry
Request To Call Back
Product Image (MTS-9004)

Exhaust Gas Calorimeter

Exhaust Gas Calorimeter: Micro Teknik Determination of the thermal exhaust gas losses is essential when calculating an energy balance for internal combustion engines. Calorimetric measurement is an established method of doing this. It involves a largely complete and loss-free heat exchange between the exhaust gas and a cooling medium. The exhaust gas calorimeter consists of an insulated stainless steel tank, through which the exhaust gas flows from bottom to top. While doing this, the exhaust gas gives up its heat almost completely to a finned pipe with cooling water flowing through it. The pipe is arranged in loops to achieve the maximum possible heat exchange area. Relevant temperatures (water and exhaust gas inlet and outlet) and the volumetric flow of the water are recorded electronically and displayed digitally using a measuring amplifier. The measuring amplifier is connected to the test stand using a data cable. This allows the measured data from the to be stored and processed using PC data acquisition. Connected to a test engine using a heat-resistant exhaust gas hose.

Send Inquiry
Request To Call Back
Product Image (MTS-9002)

4 Cylinder Petrol Engine

4 Cylinder Petrol Engine: Micro Teknik Technical Description: In conjunction with the brake unit, the test engine makes up a complete engine test stand. The engine is a 4-cylinder in-line engine with a regulated catalytic converter. It has an integral closed cooling water circuit. A solid, welded base frame on rollers carries the entire setup. Hazardous areas such as hot surfaces and rotating parts are covered with perforated plates. The engine is connected to the brake unit using an elastic coupling with a jointed shaft. The test engine is attached to the brake unit using toggle-type fasteners. The engine is fitted with sensors that measure the temperatures and the cooling water flow rate. The control cabinet contains all of the electronic equipment for managing the engine (factory set). On the control cabinet are an ignition key, an operating time counter and warning lamps. Data is transmitted between the brake unit and the engine via a data cable connecting the control cabinets for the two units. For safety reasons, the engine has been adjusted so that it is only possible to start it when it is connected to the brake unit both mechanically and electrically.

Send Inquiry
Request To Call Back
Product Image (MTS-8008)

Suspendid Soil Indicator

Suspendid Soil Indicator: Micro Teknik The Suspended Solids Indicator is a state of the art, easy to use meter that provides many benefits to the plant operations staff. It is a unique system that combines advanced electronics with a solid-state, optical sensor. It is a multi-range indicator designed for the measurement of suspended solids in aqueous solutions. The microprocessor-based electronics of the indicator provide a high degree of flexibility and ease of use.

Send Inquiry
Request To Call Back
Product Image (MTS-8003)

Water Flow Indicator

Water Flow Indicator: Micro Teknik We are proud of ourselves for being able to manufacture and export matchless quality water flow indicators. Our water flow indicators are long lasting, efficient, fault resistant and provide very accurate readings.

Send Inquiry
Request To Call Back
Product Image (MTS-8002)

Temperature Logger

Temperature Logger: Micro Teknik We are providing very high quality temperature logger that is compact, fault resistant and easy to use. Our temperature logger can provide a very high temperature sampling rate. One can very easily purchase our temperature logger for using in variety of applications as it is very reasonably priced.

Send Inquiry
Request To Call Back
Product Image (MTS-6003)

Revolving Bosshead

Revolving Bosshead: Micro Teknik is Manufacturer, Exporter & Supplier of Revolving Bosshead

Send Inquiry
Request To Call Back
Product Image (MTS-5077)

Charts For Primary (Set Of 6)

Charts For Primary (Set Of 6): Micro Teknik Numbers Addition Subtraction Multiplication Division Multiplication Table

Send Inquiry
Request To Call Back
Product Image (MTS-5076)

3-D Charts

3-D Charts: Micro Teknik Addition Division Months of Year Subtraction Time Weight & Measurement Shapes Counting 1-10 Multiplication Currency & Coins

Send Inquiry
Request To Call Back
Product Image (MTS-5074)

Mensuration Kit

Mensuration Kit: Micro Teknik We offer an exclusive range of menstruation kit that aid and assist the students in gathering the basic knowledge on how to measure different objects and areas. These menstruation kit are manufactured with high accuracy, so as to ensure that they help in

Send Inquiry
Request To Call Back
Product Image (MTS-5014)

Service Protractors

Service Protractors: Micro Teknik Rectangular Plastic ivorine MK III b) Rectangular MK III Aluminium anodized very durable c) Artillery Protractor

Send Inquiry
Request To Call Back
Product Image (MTS-5070)

Ratio Of Area Of Similar Triangles (Acrylic)

Ratio Of Area Of Similar Triangles (Acrylic): Micro Teknik To verify the result that ration of the areas of two similar triangles is equal to the ratio of the square of their corresponding sides.

Send Inquiry
Request To Call Back
Product Image (MTS-5013)

Plastic Protractors Circular

Plastic Protractors Circular: Micro Teknik Size: 5 (12.50 cm) 6 (15 cm) Rotating Compass Spring Divider 95 mm Spring Pencil Compass 95 mm Spring Ink Compass 95 mm

Send Inquiry
Request To Call Back
Product Image (MTS-5067)

Pythagoras Theorem (Acrylic)

Pythagoras Theorem (Acrylic): Micro Teknik 50 pcs by arranging small Square pieces to make side squares

Send Inquiry
Request To Call Back
Product Image (MTS-5066)

Construction Of Parabola (Wooden)

Construction Of Parabola (Wooden): Micro Teknik Equally marked points of division are joined together to construct a parabola.

Send Inquiry
Request To Call Back
Product Image (MTS-5065)

Math Lab Instruments

Math Lab Instruments: Micro Teknik To understand the concept of square number it can also be used to learn cartisian coordinates.

Send Inquiry
Request To Call Back
Product Image (MTS-5064)

Magnetic Graph Co-ordinate Board With Marker Pen

Magnetic Graph Co-ordinate Board With Marker Pen: Micro Teknik

Send Inquiry
Request To Call Back
Product Image (MTS-5063)

Graph Roll-Up Chart

Graph Roll-Up Chart: Micro Teknik 67X100cms 100X135cms

Send Inquiry
Request To Call Back
Product Image (MTS-5062)

Geometry Kit (Acrylic)

Geometry Kit (Acrylic): Micro Teknik An all in one kit for teaching entire geometrical concepts & shapes.

Send Inquiry
Request To Call Back
Product Image (MTS-5061)

Efficiency In Packing

Efficiency In Packing: Micro Teknik There are also a range of problems which permit the sizes of the circles to be non-uniform. One such extension is to find the maximum possible density of a system with two specific sizes of circle (a binary system). Only nine particular radius ratios permit compact packing, which is when every pair of circles in contact is in mutual contact with two other circles (when line segments are drawn from contacting circle-center to circle-center, they triangulate the surface).

Send Inquiry
Request To Call Back
Product Image (MTK-3024)

Screw Driver Set for Engineering Electronic usage

Screw Driver Set Made from steel alloy and nickel plated for long life. Slip-resistant, textured grip provides improved comfort. Handle with ergonomic design is easy to grip. Set includes 4 in. and 6 in. standard, 3 in. and 6 in. cabinet tip and 1 point and 2 point Philips head screwdrivers.

Send Inquiry
Request To Call Back
Product Image (MT-101372)

AIR CONDITIONING

  • Color:White Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS -542)

Ring and Ball App

Price: 10 INR/Piece

Ring & Ball App: Our company is one of the very proficient and well known companies in the line of manufacture, supply and export of a much wider range of supreme quality laboratory equipments, apparatuses and electrical appliances. We have also brought forth to our clients these ball & ring app which is widely used in several laboratory purposes. Our ball and ring apparatus is widely used in several regions of the country as well as in abroad and are appreciated for its supreme quality and features. We are providing these ball & ring app to our clients at very conventional range of prices. Features: Very tough and robust construction Extremely high durability Corrosion resistant Dimensionally accurate Wide utility

Send Inquiry
Request To Call Back
Product Image (MTS-592)

Mild Steel Beam Mould

  • Color:Blue
  • Dimension (L*W*H):100 x 100 x 500 Millimeter (mm)
  • Feature:Durability, Portable
  • Material:Mild Steel
  • Power Source:Manual
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTTG-36)

Metallic Starstar With 5 Metal Branches

Price: 10.0 INR/Piece
  • Accuracy:100 %
  • Color:Brown
  • Equipment Materials:Wooden, Stainless Steel
  • Feature:Highly Efficient
  • Material:Wooden, Stainless Steel
  • Power Source:Manual
  • Type:Metallic Starstar With 5 Metal Branches
  • Usage:Industrial
Send Inquiry
Request To Call Back
Product Image (MTS-19015)

Plank's Constant Apparatus

  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:50 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5058)

Stop Watch

  • Color:Black
  • Display Type:Digital
  • Material:Plastic
  • Power Source:Battery
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-8001)

Current Meters

  • Color:Silver
  • Feature:Durability, Portable
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5028)

Game Of Place Value (Wooden)

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Wooden Plastic
  • Power Source:Manual
  • Usage:Education
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-14008)

Center Of Pressure

  • Color:Transparent
  • Feature:Durability, Portable
  • Material:Steel, Plastic
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5034)

Cylinder Cut In 8 Parts (Wooden)

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Wooden
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MTS-17002)

Disc Centrifuge

  • Color:White Black
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5030)

Geometrical Solids Wooden

  • Color:Brown
  • Feature:Durable, light weight
  • Material:Wooden
  • Power Source:Manual
  • Usage:Education
Send Inquiry
Request To Call Back
Product Image (MTS-1101OD)

Orifice Discharge

  • Color:Transparent
  • Dimension (L*W*H):250 x 250 x 450 Millimeter (mm)
  • Material:Stainless Steel, Glass
  • Power Source:Manual
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-19013)

Energy Band Gap For Semi Conductor Diode

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5033)

Conic Section Wooden

  • Color:Multicolor
  • Feature:Durability, Portable
  • Material:Wooden
  • Power Source:Manual
  • Usage:Education
Send Inquiry
Request To Call Back
Product Image (MTS-5039)

Fractions Of Triangle (Wooden)

  • Color:Green Brown
  • Feature:Durability, Portable
  • Material:Wooden
  • Power Source:Manual
  • Usage:Education
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-16004)

Ductility Testing Apparatus

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-19013)

Miniature Lathe Machine

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-5046)

Set Of Volumetric Cups (Plastic)

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Plastic
  • Power Source:Manual
  • Usage:Education
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-19097)

Brazing Hearth

  • Color:Grey Red
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-9010)

Four Stroke Petrol Engine Variable Compression

  • Color:Silver Black Red
  • Feature:Very long lasting, Smooth Working
  • Material:Stainless Steel
  • Operate Method:Petrol
  • Usage:Laboratory
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5026)

Teacher Abacus (Wooden)

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Wooden
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-17005)

Flow through Particle Layers

  • Color:Black
  • Material:Mild Steel, Glass
  • Power Source:Manual
  • Usage:Laboratory
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-9012)

Four-Cycle Petrol Engine

  • Color:Silver Red
  • Material:Steel
  • Power Source:Petrol
  • Usage:Laboratory
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5073)

Identity Set-iii (Wooden)

  • Color:Multicolor
  • Feature:Abrasion resistant, Durable
  • Material:Wooden
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MTS-9008)

Four Stroke Petrol Engine

  • Color:Silver Black
  • Dimension (L*W*H):500x345x410 Millimeter (mm)
  • Operate Method:Petrol
  • Usage:Laboratory Equipment
  • Warranty:Yes
  • Weight:34 Kilograms (kg)
Send Inquiry
Request To Call Back
Product Image (MTS-5025)

Counting Abacus (1-10) (Wooden)

  • Color:Multicolor
  • Dimension (L*W*H):340 x 100 x 385 Millimeter (mm)
  • Feature:Durable, light weight
  • Material:Wooden
  • Power Source:Manual
  • Usage:Education
  • Weight:200-500 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-5049)

Shapes Board (Big) (Wooden)

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Education
Send Inquiry
Request To Call Back
Product Image (MTS-5020)

Field Observation Equipment

  • Color:Brown
  • Feature:Durability, Portable
  • Material:Metal
  • Power Source:Manual
  • Usage:Industrial
  • Weight:100-200 Grams (g)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-5016)

Geo Board-Circle Wooden

  • Color:Brown
  • Feature:Durable, light weight
  • Material:Wooden
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
  • Weight:100-500 Grams (g)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-5043)

Time Teaching Stamps

  • Color:White
  • Feature:Durability, Portable
  • Material:Wooden, Rubber
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5001)

Drawing Instruments Box

  • Color:Silver
  • Material:Stainless Steel
  • Operate Method:Manual
  • Power Source:Manual
  • Usage:Education
  • Warranty:Yes
  • Weight:100-200 Grams (g)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-18006)

Sanitation Fittings Training Panel

  • Color:White Black
  • Feature:Durability, Portable
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Education
  • Voltage:230 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5015)

Drawing Models

Drawing Models: Micro Teknik Wooden, beautifully painted and specially designed for illustrating and teaching geometrical drawing. Approximate size of the model is 20x12 cm. Dissected Models (A) Rectangular prism. (B) Rectangular Pyramid. (C) Triangular Prism. (D) Triangular Pyramid. (E) Square Prism. (F) Square Pyramid. (G) Pentagonal Prism. (H) Pentagonal Pyramid. (I) Hexagonal Prism. (J) Hexagonal Pyramid. (K) Octagonal Prism. (L) Octagonal Pyramid. (M) Decagonal Prism. (N) Decagonal Pyramid. (O) Cube 20 x 20 cm (P) Cone (Q) Cone cut in four sections (R) Sphere 15 cm (S) Cylinder 9301 Object Drawing Models: Undissected Models (A) Rectangular Prism. (B) Rectangular Pyramid. (C) Triangular Prism. (D) Triangular Pyramid. (E) Square Prism. (F) Square Pyramid. (G) Pentagonal Prism. (H) Pentagonal Pyramid. (I) Hexagonal Prism. (J) Hexagonal Pyramid. (K) Octagonal Prism. (L) Octagonal Pyramid. (M) Decagonal Prism. (N) Decagonal Pyramid. (O) Cube 20 x 20 cm (P) Skeleton Cube 20 x 20 cm (Q) Cone (R) Sphere 15 cm (S) Half Sphere (T) Cylinder (U) Semi " Cylinder (U) Quarter Cylinder (V) Tetrahedron (W) Octahedron (X) Circle (Y) Double Cross (Z) Single Cross (Z1) Model Plates (Set of 7) 9307 Cube Dissectible: A cube of 15 cm side dissectible in six square pyramids, beautifully painted in two colours. 9315 A Set of Wooden Model on Interpenetration of Solids as under : (A) Two cylinders of different diameters penetrating each other at right angles. (B) Two cylinders of different diameters with oblique penetration. (C) A cylinder into a cone with oblique penetration. (D) A Cone and cylinder with penetration at right angles. (E) Two cones at right angles. (F) Two square prisms of different sizes at right angles. (G) Two square prisms at oblique angles. (H) Sphere and cone at centre. (I) Sphere and cylinder eccentric. (J) Sphere and cylinder at centre. 9316 Binomial Cube: (A + B) 3 Wooden model to explain the formula. Very interesting model in Wooden case. 9317 Cubic Decimeter: 10 cm cube, wooden, with printed dial, dissectible in 3 parts. 9318 Slide Rule Model: Very instructive wooden model about 70x14 cm in size with four scales. Designed to explain how to multiply, to divide, to square and to find square root and to find cube of with instructions. 9321 Geometrical instrument Box: 9325 Projection of Straight Line Apparatus: 9326 Carpentry Joints: A set of 20 wooden joints in polished wooden box with nomenclature.

Send Inquiry
Request To Call Back
Product Image (MTS-5022)

Laboratory Models

  • Color:Multicolor
  • Feature:Durability, Portable
  • Material:Wooden
  • Operate Method:Manual
  • Usage:Laboratory
  • Warranty:Yes
  • Weight:10-100 Grams (g)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-9016)

Test Stand for Single Cylinder Engines 7.5kW

  • Color:White Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-8012)

Characteristic Variables of Hydraulic Turbomachines

  • Color:White Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-101162)

Sectional Working Model of 4 Stroke Petrol Engine

  • Color:Multicolor
  • Material:Mild Steel
  • Operate Method:Petrol
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-8010)

Transient Drainage Processes in Storage Reservoirs

  • Color:White Black
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-101425)

Solid And Liquid Extraction Unit

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-101263)

Micrometer Contraction Gauge

  • Color:Silver Black
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101163)

Multicolored Sectional Working Model of 2 Stroke Diesel Engine

  • Color:Multicolor
  • Material:Mild Steel
  • Operate Method:Diesel
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTFM-28)

Hydraulic Ram

  • Color:White Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-22543)

Cone Density Apparatus

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MTS-101426)

Bubble Cap Distillation Column

  • Color:Black Silver
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-16015)

Block Maker

  • Automation Grade:Automatic
  • Color:Yellow
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101259)

Discharge Over Notches Apparatus

  • Color:White Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS -109475 )

Universal Moisture Meter

  • Accuracy:0.2 %
  • Color:Grey
  • Dimension (L*W*H):40x32x17 Centimeter (cm)
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101292)

Impulse Turbine

  • Color:Black
  • Dimension (L*W*H):400 x 400 x 620 Millimeter (mm)
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-101427)

Sieve Plate Distillation Column

  • Color:Blue Silver
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Education
  • Voltage:220 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-101289 )

Kaplan Turbine (Superior)

  • Color:White Grey Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-953)

Wall Thermometer C and F Combined Indian ordinary

  • Application:Thermometer Baror
  • Color:White
  • Feature:Durable, light weight
  • Material:Wooden
  • Power Source:Manual
  • Product Type:Wall Thermometer C and F Combined Indian ordinary
  • Usage:Thermometer Baror
Send Inquiry
Request To Call Back
Product Image (MT-HE)

Hoisting Equipment

  • Color:Multicolor
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:110 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-958)

Hair Hygrometer

  • Color:White Black
  • Feature:Durable, light weight
  • Material:Plastic Glass
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MTS-109495)

Soil Thermometer

  • Color:Silver Green
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS 954)

Aneroid Barometer .

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Metal
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-101437)

Rotary Dryer

  • Color:White Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-4070)

Rammers .

  • Color:Black Yellow White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:240 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-101221)

INDEPENDENT SUSPENSION EDUCATIONAL EQUIPMENT

  • Color:Black
  • Frequency:50 Hertz (HZ)
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
  • Weight:20-60 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MT-101233)

Steel Wankel Engine

  • Color:Black Grey
  • Feature:Durable, light weight
  • Material:Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-12077)

Archemedlan Screw

  • Color:Black
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-101216)

Silver colored CONTINUOUS VARIABLE TRANSMISSION

  • Color:Silver
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-9017)

AUTOMOTIVE EXHAUST GAS ANALYZER

  • Automation Grade:Automatic
  • Display Type:LCD Display
  • Feature:Durable, light weight
  • Material:Plastic
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
  • Weight:1-10 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MT-101211)

COMMON RAIL DIESEL INJECTION ENGINE

  • Color:Silver
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Weight:10-20 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MT-101325)

Working Model Of Bulldozer

  • Color:Yellow Black
  • Frequency:50 Hertz (HZ)
  • Material:Plastic
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101203)

Actual Cut Section Gear Box Model

  • Color:Silver Blue
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MT-101202)

AUTO IGNITION SYSTEM DISTRIBUTOR TEACHING KIT

  • Color:White Black
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-101326)

Working Model of Scraper

  • Application:Construction Machine Lab Equipment
  • Color:Orange
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (101204)

Actual Cut Section Automatic Gear Box Car

  • Color:Grey Blue
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MT-101183)

Mock Layout of Car Wiring

  • Color:Multicolor
  • Frequency:50 Hertz (HZ)
  • Power Source:Electric
  • Usage:Car
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-12049)

Micrometer Contract on Gauge

  • Color:Silver
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTK-101230)

Sectional Working Model of 4 Stroke Diesel Engine

  • Color:Silver Red
  • Material:Mild Steel
  • Operate Method:Diesel
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-101224)

2 STROKE C.I. ENGINES

  • Application:Two Wheeler
  • Color:Silver
  • Material:Stainless Steel
  • Power Source:Electric
  • Warranty:1 Year
  • Weight:10 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MT-101323)

Working Model of Crawler Crane

  • Color:Yellow
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory
  • Voltage:220 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-101317)

Cupola .

  • Color:Multicolor
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-101213)

STARTER MOTORS TRAINER

  • Color:Silver
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
  • Weight:10-20 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTN-2150)

STEERING WHEEL ALIGNMENT MACHINE

  • Color:Silver
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
  • Weight:20-40 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTK-3001)

Hydraulic Bench Press

  • Color:Red
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-101208)

Models of Dissected Soli

  • Color:Silver
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Operate Method:Diesel
  • Usage:Industrial
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTK-101201)

Actual Cut Section Gear Box

  • Color:Silver Blue
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-13043)

Lateral Extensometer

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-19004)

Lathe Machine

  • Automation Grade:Automatic
  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-101184)

Mock Layout Tractor Wiring

  • Color:Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MT-101202)

Actual Cut Section Gear Box Car

  • Automation Grade:Automatic
  • Color:Silver Blue
  • Material:Stainless Steel
  • Usage:Industrial
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-101097)

Multi Plate Clutch Working Model

  • Color:Blue Red SIlver
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-101096)

Centrifugal Clutch

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Day
Send Inquiry
Request To Call Back
Product Image (MTS-12066)

Water Wheel

  • Color:Yellow
  • Feature:Durable, light weight
  • Material:Plastic
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MT-101185)

Electronic Ignition System of an Automobile

  • Color:Silver Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTK-101200)

Model of Gear Box 3 Forward and 1 Reverse

  • Color:Blue Black
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-19007)

To Study of Gunn Diode Microwave Test Bench

  • Color:Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-19010)

Logic Gates Experiment for Electronics Lab Equipments

  • Color:White
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory
  • Voltage:5 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-12061)

Tissue Culture Equipments

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel, Plastic
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-101238)

IGNITION SPARKING PLUG TESTER

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrail
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-101235)

Mild Steel CONTINUOUS VARIABLE TRANSMISSION

  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-101232K)

V-ENGINE .

  • Color:Silver
  • Material:Stainless Steel
  • Operate Method:Diesel
  • Usage:Industrial
  • Warranty:1 Year
  • Weight:10 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MT-101313)

Blast Furnace

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MT-101186)

Coil Ignition System of an Automobile

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
  • Delivery Time:2 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTK-101226)

4 Stroke 1 Cylinder Motor Cycle Engine

  • Color:White Blue
  • Dimension (L*W*H):3300 x 2900 x 1700 Millimeter (mm)
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101092)

Oldhams Coupling

  • Color:Multicolor
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-101061)

Belt Pullley Models

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101065)

Shafting General Bearing

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MT-19094)

Melting Crucible Furnace

  • Color:Red
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101062)

Multicolored Belt Drive Single Speed

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MT-101225)

2 Stroke 1 Cylinder Motor Cycle Engine

  • Color:Silver Black
  • Feature:Very long lasting, Elegant finish, Smooth Working
  • Material:Mild Steel
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-101055)

Hydraulic Brake Unit

  • Color:Multicolor
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101044)

Mild Steel Triangular Eccentric Cam

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-101060)

Air Brake Actual Working

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTK-3002)

Hydraulic Bench Press Machine

  • Color:Blue
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101045)

Tri Clover Leaf Cam .

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MTS-101050)

Band Brake

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Cast Iron
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101043)

Action of Cams

  • Color:Multicolor
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-101091)

Mild steel Split Muff Coupling

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-101057)

Hydraulic Brake Unit With Four Brake Drums

  • Color:Multicolor
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101040)

Inversion of Single Slide Crank Mechanism

  • Color:Yellow Grey
  • Feature:Durable, light weight
  • Material:Mild Steel, Wooden
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MTS-101031)

Pantograph Mechanism

  • Color:Brown
  • Feature:Durable, light weight
  • Material:Wooden
  • Power Source:Manual
  • Usage:Laboratory
Send Inquiry
Request To Call Back
Product Image (MTS-101049)

Double Shoe Brake Model

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-101067)

Ball Bearings Set

  • Color:Blue White
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Delivery Time:1 Week
  • Supply Ability:100 Per Day
Send Inquiry
Request To Call Back
Product Image (MTS-101024)

Durable Slide Crank Mechanism

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Aluminium
  • Power Source:Manual
  • Usage:Education
  • Warranty:No
Send Inquiry
Request To Call Back
Product Image (MTS-101088)

Flexible Coupling

  • Color:Multicolor
  • Feature:Durability, Portable
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-10940)

Screw Efficiency Apparatus

  • Color:Multicolor
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-10937)

Geared Jib Crane

  • Color:Yellow
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-10902)

Link Polygon Apparatus without Weights

  • Color:Black
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MT-28012)

Power Driven Pipe Threading Machine

  • Color:Red Black
  • Frequency:25-60 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:115 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTK-10907)

Polygon and Triangle Of Forces Apparatus

  • Color:Black Brown
  • Feature:Durable, light weight
  • Material:Wooden, Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-10962)

Feltcher Trolley

  • Color:Silver
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101038)

Crank Drive to Oscillating Link Mechanism

  • Color:Blue
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Education
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-10904)

Parallelogram Of Force Apparatus

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Wooden, Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-10906)

Triangle And Parallelogram Of Forces Apparatus

  • Color:Brown Black
  • Dimension (L*W*H):60x50 Centimeter (cm)
  • Feature:Durable, light weight
  • Material:Wooden, Stainless Steel
  • Power Source:Manual
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-101030)

Peculiar Linkage Drive Model

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Metallic and wooden
  • Power Source:Manual
  • Usage:Laboratory
Send Inquiry
Request To Call Back
Product Image (MTS-10955)

Maxwell Vibration Needle

  • Color:Silver Blue
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-28027)

Oxy-Acetylene Equipment

  • Color:Black Brown
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101023)

Durable Crank and Connecting Rod Model

  • Color:Multicolor
  • Feature:Durable, light weight
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-10905)

Polygon Of Forces Apparatus

  • Color:Black Brown
  • Dimension (L*W*H):75x70 Centimeter (cm)
  • Feature:Durable, light weight
  • Material:Wooden, Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-10931)

Pulley Demonstration Set

  • Color:Silver Blue
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-10957)

Tortion Apparatus Vertical Type

  • Color:Silver Black
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-10938)

Worm And Worm Wheel

  • Application:Lab Equipments
  • Color:Silver
  • Material:Cast Iron
  • Power Source:Manual
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-10932)

Compound Wheel And Axle

  • Color:Multicolor
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-10934)

Wheel And Axle Simple Form

  • Color:Black Yellow
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-10922)

Friction Slide Apparatus

  • Color:Brown Blue
  • Feature:Durable, light weight
  • Material:Wooden, Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-10946)

Shear Force Apparatus

  • Color:Red
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
Send Inquiry
Request To Call Back
Product Image (MTS-10936)

Rope Brake And Dynamometer

  • Color:Blue Brown
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-10935)

Winch Crab Single

  • Color:Silver
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-10947)

Bending Moment Apparatus

  • Color:Brown
  • Feature:Durable, light weight
  • Material:Wooden
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MTK-101227)

Sectional Working Model of 2 Stroke Petrol Engine for Laboratory use

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-10952)

Young's Modulus Apparatus

  • Color:Black
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-101223)

4 Stroke 1 Cylinder Vertical Diesel Engine

  • Color:White Grey Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-10923)

Jointed Roof Truss On Wheels

  • Color:Silver Green
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-10956)

Tortion Apparatus Searle's Type

  • Color:Silver Blue
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-12094)

Rigidity of Wires

  • Application:Lab Equipments
  • Color:Silver Black
  • Material:Stainless Steel
  • Power Source:Manual
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-10922)

Structural Mechanics Apparatus

  • Color:Blue
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-10949)

Compression of Coiled Springs

  • Color:Black
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-10920)

Law Of Moments Apparatus

  • Color:Grey Red
  • Material:Aluminium
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-10918)

Lever Apparatus

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Wooden
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-101025)

Slide Crank Mechanism .

  • Color:Yellow Grey
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS -546)

Relative Density Apparatus Mould

  • Color:Green
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-57)

Laser Distance meter Lite

  • Color:Black
  • Feature:Durable, light weight
  • Material:Plastic
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-532)

Proving Ring Penetrometer

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
  • Weight:5.4 Kilograms (kg)
Send Inquiry
Request To Call Back
Product Image (MT-101203)

ENGINE DIAGNOSTIC SCANNER

  • Color:Black
  • Display Type:LCD Display
  • Material:Plastic
  • Operate Method:Electric
  • Usage:Industrial
  • Voltage:12 Volt (v)
  • Warranty:1 Year
  • Weight:1-2 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS -505)

Jolting Apparatus

  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-586)

Vibratory Hammer

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power:1 Horsepower (HP)
  • Power Source:Manual
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-591)

I S Cube Moulds

  • Color:Grey
  • Feature:Durability, Portable
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-21)

Aluminium made Tripod Stand

  • Color:Silver Red
  • Feature:Durable, light weight
  • Material:Aluminium
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-548)

Slume test app

  • Color:Black
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-20)

Levelling Staff

  • Color:White Black
  • Feature:Durable, light weight
  • Material:Aluminium
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Delivery Time:1 Week
Send Inquiry
Request To Call Back
Product Image (MTS-583)

Vibrating Machine Switch Local Motor

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-588)

Vibrating Table .

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:440 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-567)

Rotap Sieve Shaker Motorised

  • Color:Silver
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-757)

Triaxial Cell

  • Color:Silver
  • Dimension (L*W*H):50 - 300 Millimeter (mm)
  • Material:Mild steel
  • Power Source:Electric
  • Usage:Laboratory
  • Voltage:220/230 Volt (v)
  • Warranty:1 Year
  • Weight:10 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-17)

Telescopic Alidade

  • Color:Black
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-560)

Sand Sampler

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
Send Inquiry
Request To Call Back
Product Image (MTS -555)

Sampling Tube

  • Color:Silver
  • Feature:Durability, Portable
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Industrial
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS-578)

Tile Flexure Strength Tester

  • Color:Blue
  • Material:Mild Steel
  • Operate Method:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
  • Weight:50-80 Kilograms (kg)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTS -541)

Rapid Moisture Meter

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Wooden, Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-539)

Pulveriser Laboratory

  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:440 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTK-101316)

Electric Arc Furnace

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Wooden
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MTS-10933)

Wheel And Differential Axle

  • Color:Silver
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-10924)

Shear Legs Apparatus

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-10951)

Hook's Law Apparatus

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory
Send Inquiry
Request To Call Back
Product Image (JEQ-4S)

STABILITY TEST CHAMBER

Price: 1000 INR/Piece

CODE: JEQ-4S This equipment provide a long time stable environment of temperature, humidity and illumination for the Pharmaceutical industry medicine invalidation evaluation. Its applied in the medicine accelerating test, growth test, high humidity test and high illuminance test. The Inner chamber is 304 high-quality stainless steel, full are design, easy to clean and maintain. The unique air duct design ensures the uniform temperature and humidity in the box. Remote monitoring via mobile phones and computers. It has three levels of password authority management function. Data recording system can record more than 1 million pieces of data, even if the power failure, the data will not be lost, can be exported through the U disk. Conforms to the national pharmacopoeia, GMP, FDA, ICH and other relevant standards for long- term test, intermediate test, accelerated test, with stable and reliable performance to meet the requirements of temperature, humidity, light and other environmental conditions in multiple drug tests.

Send Inquiry
Request To Call Back
Product Image (MT-101319)

Model Of Ammonia Ice Plant

  • Automation Grade:Automatic
  • Color:Blue Yellow Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-16002)

Benkleman Beam

Benkleman Beam: Micro Teknik This device was developed by U.S. Bureau of Public Roads and is used time saver deflections of flexible pavements. The light weight instrument is supplied in two parts for assembling on site with easy hand tools. In use one end of the beam rests at a point under investigation while the beam is pivoted at the centre. The free end carries a dial gauge to record the deflections. The other end is kept on a stable platform. The beam ratio is 2:1 which magnifies even small deflections. Supplied with a dial gauge 0.01 x 25mm. This is a light weight dismount liable instrument and easy to carry.

Send Inquiry
Request To Call Back
Product Image (MTS-454(g))

Digital Compression Testing Machine

Price: 10 INR/Piece

Compression Testing Machine Unconfined Compression Tester Proving Ring Type (Motorised) This is with the added advantage of a motorised drive permitting a choice of three constant rates of stain. SPECIFICATION : Comprises a screw operated load frame, cap.5000kg with a gear box and motor drive giving 1.25, 1.5, 2.5mm/min. Rates of strain, a pair of cone seating, adaptor for proving ring, and stain dial gauge bracket. Supplied with one pair of male/female coning tools for 38mm dia samples but without ring and dial gauge. Suitable for operation on 230 V, Single Phase A.C. Supply. ACCESSORIES :Coning tools in pairs (Male & Female) for samples having diameter 38mm, 50mm, 75mm

Send Inquiry
Request To Call Back
Product Image (MTS-9015)

Engine Test Stand 11kW

Engine Test Stand 11kW: Micro Teknik Technical Description Setting up a power test stand for internal combustion engines with a power output of up to 11kW requires two main components: The control and load unit and a choice of test engine: single cylinder research engine (water-cooled), 2-cylinder petrol engine (air-cooled) and 2-cylinder diesel engine (water-cooled). The main function is to provide the required braking power. This is generated by an air-cooled asynchronous motor with a regenerative feedback unit. The braking speed can be precisely adjusted using a potentiometer. The torque is measured indirectly using a force transducer. For this purpose, the entire brake system is mounted in floating bearings. The test engine is mounted on the test bed and connected to the asynchronous motor. The asynchronous motor is initially used as the starting mechanism for the test engine. As soon as the test engine is running, the asynchronous motor and regenerative feedback unit act as a brake unit for applying a load to the combustion engine. The braking power is fed back into the electrical system. The lower section of the mobile instrument panel contains fuel tanks and a quietening vessel for the intake air. The panel contains digital displays for the speed, torque, air consumption and temperatures (engine cooling water - inlet and outlet - exhaust gas, fuel and intake air). Fuel consumption, cooling water flow rate in test engine and the calorimeter available as an option are displayed in analogue form. All measuring signals are present in electrical form and can be stored and processed using the PC data acquisition function supplied. Data is transmitted to the PC using a USB interface. Lifting gear is required to exchange the test engines.

Send Inquiry
Request To Call Back
Product Image (MT-101214)

Engine Dynamometers

Price: 10 INR/Piece

ENGINE DYNAMOMETER (HYDRAULIC) Specification of Engine Dynamometers Dynamometers are designed for Universal Application in all Types of Testing like for Engines, Turbines, Motors, Components and PTO testing Calibration systems with levers and weights allow simple and precise adjustment and checking of the torque measuring chain, regardless of whether the brake is at standstill or rotating Stable Loading useful for Testing of Newly Assembled & Reconditioned Engines 750 kW up to 25,000 kW and speeds up to 10,000 rpm. Torque measurement accuracy is ±0.25%

Send Inquiry
Request To Call Back
Product Image (MTS-10900)

Universal Force Table for labs

Universal Force Table We are manufacture and exporter of all type Engineering lab Equipment , Mechanical lab Equipment for engineering students and College, For experimentally verifying the laws of triangle, parallelogram and polygon of forces. Comprising of a circular 40 cm. diameter aluminium disc, graduated into 360 degrees. Complete with levelling screws, clamping device to fix the table at any desired angel, five sliding clamp pulleys, central ring, string and five sets of iron. nickelled slotted weights, each set containing nine weights and one hanger of 50gms. each.

Send Inquiry
Request To Call Back
Product Image (MTK-101193)

Battery Hydrometer

Price: 10 INR/Piece

Battery Hydrometer Microteknik is Manufacturer, Exporter & Supplier of Battery Hydrometer. Feature: 1.Material:plastic with rubber 2.Size:190x75x50mm 3.Instruction of use: Insert the pipe into battery cell,squeeze the bulb till fluid reached the signed fluid level Tap the hydrometer slightly to remove bubbles. Small pointer at the top must be vertical,then large pointer indicates the battery condition. Return fluid to the same cell. Flush hydrometer with clean water when it finished,it can be reused. Note: Indian Make

Send Inquiry
Request To Call Back
Product Image (MTS-10930)

Crony Brake Dynamometer

Price: 10 INR/Piece

Crony Brake Dynamometer: Consisting of a two blocks of wood clamped together with a pulley in the center. The pulley is fitted to shaft moving on the ball bearings. A lever bar is attached to one of the blocks carrying a weight hanger at the outer end. Aspiring balance is also fitted to measure the load factor developed with the tightening of the block with wing nuts and spring.

Send Inquiry
Request To Call Back
Product Image (MT-101322)

Working Model of Bucket Trencher

  • Color:Grey
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTP-900W)

Wimshurst Machine .

Price: 1000.0 INR/Piece

Wimshurst Machine Sparks : 70 mm Discs : 300 mm Electrostatic machine known as "influence" It is equipped with 2 insulating discs receiving metal sectors. The discs rotate in opposite directions to each other and the friction of metal brushes on the sectors generates a potential difference. The charges accumulated in Leiden bottles to increase the potential difference. Technical data Potential difference : up to 160 kV Sparks : 70 mm max Disc diameter : 300 mm Dimensions : 350 x 200 x 390 mm

Send Inquiry
Request To Call Back
Product Image (MT-101331)

Model of Cooling Tower

  • Color:White Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-10943)

Deflection of Beam Apparatus

  • Color:Blue Red
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MTS-101291)

Francis Turbine

  • Color:Blue Red
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-101212)

ANTI LOCK BRAKE SYSTEM TRAINER

Price: 1000 INR/Piece

ANTILOCK BRAKE SYSTEM TRAINER The device is designed on the ABS system, where in the principle of operation and working of the same can be demonstrated . A parts and accessories are arranged on to a Colour printed board. And the system is made functional.

Send Inquiry
Request To Call Back
Product Image (MTS-10932)

Coil Friction Apparatus

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MTS-5075)

Overhead Projection Film

Over Head Projector Transparencies : Micro Teknik is manufacture, exporters & suppliers

Send Inquiry
Request To Call Back
Product Image (JKA-86)

Simple Lever

Price: 1200.00 INR/Unit

Simple Lever (Cat No. - JKA-86) Simple Lever : Stout construction duly chromium plated frame with stop at one end, interchangeable ï" stem. The lever fits through axle pivoted between centre and a thumb screw on the axle permits the lever to be adjusted for length.

Send Inquiry
Request To Call Back
Product Image (MTS-10917)

Cranked Compound Lever

Price: 10 INR/Piece

Cranked Compound Lever: All Metal Parts, Mounted On Wooden Base With Spring Balance And A Set Of Slotted Weights.

Send Inquiry
Request To Call Back
Product Image (MT-101201)

MANUAL GEARBOX

Price: 10 INR/Piece

MANUAL GEARBOX Specification: 5 speed Cut away teaching model. Four forward one reverse gear box with gear operating lever.

Send Inquiry
Request To Call Back
Product Image (MTS-5041)

Shapes Sorter Moulds (Plastic)

Shapes Sorter Moulds (Plastic): Micro Teknik Geometrical moulds to make different shapes with the help of clay.

Send Inquiry
Request To Call Back
Product Image (MTS-101083)

Sellers Coupling

Price: 10 INR/Piece

Sellers Coupling Model: Microteknik is manufacturer, exporter & supplier of Sellers Coupling Properly constructed all metallic model.

Send Inquiry
Request To Call Back
Product Image (MTS-36)

Ghat Tracer

Price: 10 INR/Piece

Ghat Tracer: We are offering a wide range of Ghat Tracer to our customers as per their requirements and to the full satisfaction of them. It is made of steel , iron & brass.

Send Inquiry
Request To Call Back
Product Image (MTEE-17)

Filtration Codensator 4700

Price: 1000.0 INR/Unit

Filtration Codensator 4700 Robust unbreakable polycarbonate Perfectly transparent support housing for better visibility of components The safety banana cords are connected to the side of the housing, which allows the front of the cords to be cleared and ensure a better readability of the fixtures. Test of robustness: supports a load of 100 kg Dimensions: 100 x 70 x 33 mm. 4700 F / 6.3V

Send Inquiry
Request To Call Back
Product Image (MTS-428)

Proctor Compaction Test Apparatus

Price: 2000.0 INR/Set
  • Color:Blue
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTK-KJ9)

Ph Tester Pen

Price: 1 INR/Piece

Ph Tester Pen Economical Simple:ideal for college use Compact Small basic ph tester Programme:0.0 - 14.0 Precision:/ - 0.1 Resolve : 0.1 Calibration: In two points Feed:1.4V Button Batteries (Included) Dimensions: (W x H x D) 150 x 29 x 15 mm Delivered with: Cap and batteries

Send Inquiry
Request To Call Back
Product Image (MTSP-12)

Single Pendulum With Variable Parameters

Price: 500.0 INR/Piece

Single Pendulum With Variable Parameters Easy variability of all the parameters: mass, length of the wire, angle of the oscillations Fixation of the perfectly punctual thread 3 masses of identical volume Can realize a device of measurement of a duration and to carry out a step of investigation of the parameters impacting or not the period of movement The length of the wire is easily adjusted thanks to the system of winding of the wire Each turn of wire is exactly 10 cm The reading of the angle of oscillation is direct on the angle protractor graduated in degree The masses of the same volume are interchangeable. The pendulum incorporates a clamping nut to attach to all laboratory stands and a device for storing masses.

Send Inquiry
Request To Call Back
Product Image (MTAC-25)

Air Cushion Table

Price: 500.0 INR/Piece

Air Cushion Table Perfectly free mobile movements Fast camera recording Low bench top space Mobiles move on a uniform air cushion generated by the fan table. The mobiles, provided, allow to achieve shocks. The inclination of the table is adjustable and measured using an inclinometer. Un articulated arm allows to fix precisely the camera to frame the entire field of experience. Dimensions: 480 x 320 x 580 mm. Composition- 1 fan table with ring. 4 adjustable feet. 1 frame for attaching accessories. 1 power supply via mains adapter. 2 mobiles of identical masses. 1 inclinometer. 1 screw to fix the camera.

Send Inquiry
Request To Call Back
Product Image (MTFF-23)

Free Fall With Digital Displays

Price: 500.0 INR/Unit

Free Fall With Digital Displays With 4 forks with digital display. Simultaneous measurement and display of time and speed for 2 or 4 positions of the ball. Very quick and easy to install. The optical forks with digital display simultaneously measure the duration of the drop and speed at each position on the graduated rail. Each fork can memorize 5 measured values. The first fork sees the passage of the ball when released and triggers the timing of the other forks. The rail provides power and communication between all the forks. To multiply the measuring points, the forks can slide along the graduated rail. It is also possible to supplement with other optical forks with digital display to install on the rail, to increase the number of simultaneous measuring points. Each optical fork with digital display is removable and can also be used alone to measure, for example, the speed of a mobile. Technical data Time measurement at 1/10 000s. Display at 1/1 000. Units of measurement: s, km / h, m / s, cm / s. Height: 1 m. Composition- 4 optical forks with digital display. 1 rail graduated from 0 to 900 mm. 1 base with screw for adjusting the verticality. 1 guide system for the release of the ball manually. 1 ball. 1 receptacle.

Send Inquiry
Request To Call Back
Product Image (MTPW-15)

Pendulum Weighing Device

Price: 1000.0 INR/Unit

Pendulum Forced Swing This device allows the study of springs. This pendulum allows in particular The static study: verification of the law of Hooke The dynamic study: measurement of the proper period of a system mass / spring- L study of forced oscillations influence of the frequency of the exciter on the resonator phase. Composition: 1 control box with stepper motor, and its power supply (mains unit), display of the frequency of rotation 1 eccentric pulley connected to the stepper motor 1 stem integral with the housing 1 graduated rule with center zero, mounted on a support that can slide on the stem 1 spring 1 rod serving both as a support for the mass and a guide for the spring 1 string connecting the eccentric pulley to the spring 3 masses of 50 g 3 plastic washers of different diameters for the study of friction 1 plastic test tube to study the influence of a fluid damper on the amplitude of the oscillations.

Send Inquiry
Request To Call Back
Product Image (MTM-41)

Magnets .

Price: 100.0 INR/Piece

Magnets U Petit model Dimensions: 80 x 53 x 21 mm. Alloy: Aluminum, Nickel, Cobalt.

Send Inquiry
Request To Call Back
Product Image (MEMV-12)

Membrane Melde Vibrator

Price: 1000.0 INR/Unit

Membrane Melde Vibrator There is a very compact device consisting of a robust loudspeaker, the membrane of which transmits the vibration to an axis positioned at its center. This axis is provided with a fixing system allowing the positioning of accessories: rods, ropes,springs Technical data Fuse protection. Electrical connection with safety sockets 4 mm. Intensity: 400 mA. Power supply by low frequency generator. 2 meters of rope included. Dimensions: 110 x 110 x 90 mm.

Send Inquiry
Request To Call Back
Product Image (MTRM-42)

Right Magnet .

Price: 200.0 INR/Piece

Right Magnet Lot Of 2 Dimensions: 150 X 20 X 7 Mm. Alloy: Aluminum, Nickel, Cobalt. Storage Box.

Send Inquiry
Request To Call Back
Product Image (MEMV-13)

Horizontal Perroquet Scale

Price: 500.0 INR/Piece

Horizontal Perroquet Scale Study of standing waves, progressive waves, reflection, propagation Horizontal configuration for a better visibility of the oscillations Constituted 43 close balances and coupled by an elastic device, It allows to easily visualizing the propagation of a disturbance (disturbance provoked manually, for example). A motor box supplied with a very low safety voltage is used to excite the device and generate transverse waves of variable frequency by varying the motor supply voltage. Technical data Dimensions (l x h x p): 1000 x 220 x110 mm Excitation motor: 0-6 V DC / 500 mA Power supply: safety sockets 4 mm

Send Inquiry
Request To Call Back
Product Image (MT-19046)

Hydraulic Guillotine

  • Automation Grade:Automatic
  • Color:White Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101280)

Display Board for Pipes

  • Color:Grey Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-407)

Air Entrainment Meter for Soil Testing

Air Entrainment Meter It consists of an aluminium vessel with built in hand operated pressure pump, connected to the measuring gauge showing directly the air content in percentage. Air content range: 0ï10% div. 0.1% up to 8% and0.5% over 8% Dimensions :Dia. 250x450 mm.

Send Inquiry
Request To Call Back
Product Image (MT-101232)

Ramjet Propulsion System

  • Automation Grade:Automatic
  • Color:Silver
  • Material:Stainless Steel
  • Operate Method:Diesel
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTK-3011CW)

CRUMP WEIR

  • Color:White
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-5023)

Creativity And Craft Work Tools

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Acrylic & Wooden
  • Power Source:Manual
  • Usage:Education
  • Warranty:Yes
  • Weight:50-250 Grams (g)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTUR-21)

Us Receiver Housing

Price: 1000.0 INR/Piece

Us Receiver Housing Dimensions: 70 x 115 x 135 mm. Received signal output: BNC socket.

Send Inquiry
Request To Call Back
Product Image (MTS-10925)

Simple Jib Crane

  • Color:Silver
  • Feature:Durable, light weight
  • Material:Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-569)

Standard Penetration Test Kit

Price: 10 INR/Piece

Standard Penetration Test Kit: We offer Standard Penetration Test Kit which consists of Drive Weight, 65 kg, fitted with chain. Guide Pipe Assembly, fitted with a driving head on one side having standard "A" drill rod thread & a cap on the second side. Drive weight falls freely through a height of 75mm Tripod stand,6 meter high connected by a tie bolt. Each leg is made of three part for easy transport. Complete with pulleys and stairing arrangements. Tripod stand 5 meter long Each leg is made of two parts. Complete with pulley & stirring arrangement. Pulley Spare. "A" Drill Rod 1 meter long. "A" Drill Rod 1.5 meter long. "A" Drill Rod 3 meter long. Sampling Auger D 1452: Augur are used to collect disturbed solid samples at reasonable depths for laboratory tests Augurs are available in two types and each in different sizes. Blade Type (Post Hole type) Each Augur outfit consists one each of augur head, one meter long rod, Tee piece and handle. Depths of excavating can be increased by using additional extension rods. Auger Head - 150mm diameter Auger Head - 100mm diameter Auger Head - 75mm diameter Auger Head - 50mm diameter Auger Head - 38mm diameter Extension Road 1 meter long for 150mm auger. 1 meter long for 100mm/75mm/50mm/38mm

Send Inquiry
Request To Call Back
Product Image (MTS-16009)

Masonry Saw

  • Color:Multicolor
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220-240 Volt (v)
  • Warranty:1 Year
  • Weight:130 Kilograms (kg)
Send Inquiry
Request To Call Back
Product Image (MTCB-12A)

Cordon Bnc . .

Price: 50.0 INR/Unit

Cordon Bnc Compatible with double safety sockets 4 mm BNC cord Single banana Max. Voltage: 500V

Send Inquiry
Request To Call Back
Product Image (MTFB-16C)

Aluminium Filament Bulbs E10

Price: 50.0 INR/Unit
  • Accuracy:100 %
  • Equipment Materials:Aluminium
  • Feature:Highly Efficient
  • Material:Aluminium
  • Power Source:Electric
  • Product Type:Aluminium Filament Bulbs E10
  • Usage:General lab equipments
  • Voltage:12 Volt (v)
Send Inquiry
Request To Call Back
Product Image (MTS-101081)

Rolled Sectional Models

  • Color:Silver Black
  • Feature:Durable, light weight
  • Material:Iron
  • Usage:Laboratory
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JEQ-5(d))

Shaking Machine Table Model

Price: 1000.0 INR/Piece
  • Accuracy:100 %
  • Color:Grey Red
  • Equipment Materials:Mild Steel
  • Feature:Highly Efficient
  • Material:Mild Steel
  • Product Type:Shaking Machine Table Model
  • Usage:Laboratory
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-101051)

Band and Block Brake

  • Color:Silver Red
  • Feature:Durable, light weight
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-803A)

Amperemeter .

Price: 500.0 INR/Piece

Amperemeter Range : -5 to 5 A Resolution : 3.8 mA

Send Inquiry
Request To Call Back
Product Image (MTE-PR6)

Parafilm .

Price: 500.0 INR/Roll

Parafilm Waterproof and gas permeable material To seal the laboratory containers It hermetically molds on the edges of the container to be sealed Use on beakers, Erlenmeyer flasks, test tubes, volumetric flasks Width : 100 mm Length : 38 m (approx.)

Send Inquiry
Request To Call Back
Product Image (MT-821B)

BAROMETER .

Price: 500.0 INR/Set

BAROMETER Gram : 0 to 1 100 mbar Resolution : 1 mbar

Send Inquiry
Request To Call Back
Product Image (MTML-94)

Multifunction Laser .

Price: 1000.0 INR/Unit

Multifunction Laser Versatile, Magnetic, fixed to the board, 1 or 3 beams Multifunction laser capable of emitting a spot beam with vertical adjustment for diffraction experiments, a horizontal plane beam for the study of wave propagation, one or three plane beams for geometrical optics experiments. Equipped with a magnetic insole for use on the board and a modulation input of the laser beam for study of the transmission of information by optical fiber (1m). Technical specification: Wavelength: 650 nm Power: 1 mW (Class II) Modulation: on banana sockets 4 mm Optical fiber connector: male thread type M6 Power supply: 2 x 1.5 V AA (LR06) batteries not supplied or AC adapter provided.

Send Inquiry
Request To Call Back
Product Image (MTAP-60)

Alcoold Pyrometer .

Price: 500.0 INR/Piece

Alcoold Pyrometer Device for highlighting and comparing the expansion of different metals. It is composed of a tank containing the fuel (alcohol), and a frame with needle. When the alcohol is burned in the tank the stem expands and causes the needle. With 3 rods (iron, brass and aluminum).

Send Inquiry
Request To Call Back
Product Image (MTK-738)

Mini-grabber to Mini-grabber Set

Mini-grabber to Mini-grabber Set Testing for ICs 5 Mini-grabber test leads. 5 COLOR CODING 16-INCH Lead length

Send Inquiry
Request To Call Back
Product Image (MTK-731)

Soldering Iron

Soldering Iron Fast heating and high quality 60W soldering iron with AC cord Requires household AC outlet Voltage:AC 220V-240V Power:60W

Send Inquiry
Request To Call Back
Product Image (MT-799)

Contact tachometer

Contact tachometer Size :200x75x40 mm Range :60 to 50,000 RPM Display :5 digits, Red LED Accuracy :+/-0.05% +1digit Sampling Rate :1 Second Power Source :4Nos-1.5VBatteries

Send Inquiry
Request To Call Back
Product Image (MTK-306)

Watt-Hour Meter

Price: 10 INR/Piece

Watt-Hour Meter Current :2.5 to 10 A Display Type :LCD

Send Inquiry
Request To Call Back
Product Image (MT-822R)

RIVER DEBIMETER

RIVER DEBIMETER Range : 0 to 4 m / s Resolution : 0,005 m / s

Send Inquiry
Request To Call Back
Product Image (MTTN-24C)

Spectral Tubesdesignation: Hydrogen

Spectral Tubesdesignation: Hydrogen Hydrogen tube

Send Inquiry
Request To Call Back
Product Image (MTPB-25)

Iron Lime Plastic Box

Iron Lime Plastic Box IRON LIME Plastic box of 150 g.

Send Inquiry
Request To Call Back
Product Image (MTMN-45)

Magnetic Needle

MAGNETIC NEEDLE large Model (Set Of 2) Needle Size: 140 Mm.- X H Base: 65 X 120 Mm.

Send Inquiry
Request To Call Back
Product Image (MT-802M)

Milliampermeter .

Milliampermeter Range : -500 to 500 mA Resolution : 0.38 mA

Send Inquiry
Request To Call Back
Product Image (MTE-BR)

Balance De Roberval

Price: 1000.0 INR/Piece
  • Accuracy:100 %
  • Color:Silver Black
  • Dimension (L*W*H):40 x 18 x 30 Millimeter (mm)
  • Equipment Materials:Mild Steel
  • Feature:Highly efficient
  • Material:Mild Steel
  • Power Source:Manual
  • Type:Balance De Roberval
Send Inquiry
Request To Call Back
Product Image (MTLP-20)

Inclined Plan

Inclined Plan Study of the forces Study of the friction Composition 1 foldable inclined plane composed of a base (595 x 80 x 20 mm) and a tilting part, of variable inclination (595 x 80 x 20 mm) 1 inclinometer 1 metal tray door masses (m = 11 g) 2 wooden plates: 200 x 75 x 12 mm, m = 90 g and 100 x 75 x 14 mm, m = 42 g 1 metal plate: 100 x 80 x 5 mm, m = 342 g 1 wooden cylinder: 45 mm, m = 200 g 1 wooden block with 6 notches door masses: 107 x 80 x 40 mm, m = 190 g 1 trolley with mass door : 100 x 80 x 40 mm, m = 190 g 10 masses marked with 50 g

Send Inquiry
Request To Call Back
Product Image (MTK-749E)

Kit for the Construction of Transformers

Price: 10 INR/Piece

Kit for the Construction of Transformers This apparatus has been designed primarily for demonstration of the basic principles of the a.c. transformer. The various coils and cores will also serve as the basis of many experiments in electromagnetism, using either direct or alternating current. Contents: 1 laminated ‹U„ core, length of side 95 mm, base 150 x 40 x 40 mm 1 each of clamp base, yoke, clamping bar and securing knobs (pair) for U-core 1 x 300-turn 4A coil 2 x 600-turn 2A coils 1 x 1200-turn 1A coil 1 x 3600-turn 0.3A coil, centre tapped 1 x 12000-turn 0.05A coil

Send Inquiry
Request To Call Back
Product Image (MTK-736A)

Bnc Cable

Bnc Cable 75 Ohm BNC RF coaxial BNC straight plug to BNC straight plug cable assemblies for use with RG-59 coaxial cable. Length:1m Connector A:Male BNC Connector B:Male BNC Impedance:75

Send Inquiry
Request To Call Back
Product Image (MTEE-08)

Switch .

Switch Robust unbreakable poly carbonate Perfectly transparent support housing for better visibility of components The connections of the banana safety cords are made on the side of the case which frees the front of the cords and ensure a better readability of the mounts. Robustness test : supports a load of 100 kg- Dimensions: 100 x 70 x 33 mm.

Send Inquiry
Request To Call Back
Product Image (MT-AP)

Cotton Lab Coat .

Price: 100.0 INR/Piece
  • Color:White
  • Equipment Materials:Cotton
  • Feature:100% cotton
  • Material:Cotton
  • Power Source:Manual
  • Product Type:Cotton Lab Coat
  • Type:Cotton Lab Coat
  • Usage:Laboratory Equipment
Send Inquiry
Request To Call Back
Product Image (MT-101240)

RUBBER SUSPENSION

Price: 10 INR/Piece

RUBBER SUSPENSION Specification: The housings of the element sizes are made out of spheroidal cast iron, with inner square sections made out of light alloy profile. Up from size 60, with housings made out of welded steel construction, with inner steel square sections including four threaded bores on each side for the easy fixation of levers and machine parts. The element installation has to be effected by bolting the two support angles on customers machine part.

Send Inquiry
Request To Call Back
Product Image (JKA-50)

Varnishing Tray

Price: 12200.00 INR/Unit

Varnishing Tray (Cat No. - JKA-50) Microteknik offers one of the essential Pharmacology equipment called Varnishing Tray with foot lever. This equipment is helpful for students and in industries as well.

Send Inquiry
Request To Call Back
Product Image (JKA-282)

Student Induction Coil

Price: 9850 INR/Unit

Student Induction Coil (Cat No. - JKA-282) On teakwood base with graducated scale. Primary coil with 300 turns and secondary with 6500 turns. Interrupter working directly off the iron core. Complete with heavy duty contacts.

Send Inquiry
Request To Call Back
Product Image (MTS-581)

Vicat Needle App

Price: 10 INR/Piece

VICAT APPARATUS Use: Consistency of cement and A Class limes, Setting times of cement and A Class limes, False set of cement and A Class limes. Standards: EN 196-3; ASTM C187, C191; AASHTO T129, T131; NF P15-414 Specifications: Reversible plunger: 10 mm diam. at one end and 1 mm diam. needle at other end; combined weight 300 grams. Steel needle mounted in plunger; 1 mm diam. x 50 mm long. Graduated scale in millimeters. Mold: Hard rubber; 70 mm base diam. x 60 mm top diam. x 40 mm h.

Send Inquiry
Request To Call Back
Product Image (MTS-16006)

Rock Concrete Cutting Machine

Price: 10 INR/Piece

Rock / Concrete Cutting Machine: Micro Teknik In several kinds of industrial purposes, it is required to cut the concretes and hence to help our clients and ease their tasks, we have brought forth one of the most appreciable and extremely efficient kinds

Send Inquiry
Request To Call Back
Product Image (MTS-101048)

Single Shoe Brake

  • Color:Multicolor
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (EM-29)

Histamine Chamber

  • Color:Grey
  • Material:Mild Steel, Glass
  • Power Source:Manual
  • Usage:Pharmaceutical Lab Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (JEQ-17SD)

Digital Magnetic Stirrer With Hot Plate

Price: 2000.0 INR/Piece
  • Accuracy:100 %
  • Color:White Orange
  • Equipment Materials:Mild Steel, Stainless steel top plate
  • Feature:Highly Efficient
  • Material:Mild Steel
  • Product Type:Digital Magnetic Stirrer With Hot Plate
  • Usage:Industrial
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-468)

Devil Abbrasion Testing Machine

Price: 10 INR/Piece

Devil abbrasion testing machine For the determination of resistance of aggregate to wear by abrasion. Two hollow cylinders, closed at one end and provided with tightly fitting covers at the other end. The inside diameter of the cylinder 20 cms and 34 cms depth. The cylinders are mounted on a shaft at an angle of 30š with the axis of rotation. The shaft rotates at 30-33 rpm through a reduction gear, coupled to a motor. Suitable for operation on 440 volts, three phase, 50 cycles, AC supply. Supplied complete with a counter and push button starter. With 12 nos cast iron spheres or steel spheres (steel balls) hardened, approx. 48 mm in diameter, each weighing 380-445.

Send Inquiry
Request To Call Back
Product Image (MTS-758)

Universal Triaxial Cell

Price: 10 INR/Piece

Universal Triaxial Cell: The IPC Dynamic Triaxial System comprises; 2 column Load Frame, PC controlled with 20 bit IMACS & 13 channels, 10kN actuator with 50mm stroke and air receiver. The system has closed loop control of axial load, cell pressure and back pressure. The system performs Saturation, Isotropic and Anisotropic Consolidation, UU CD CU triaxial tests with Pore Pressure and Volume Change measurements, Stress Path, Strain Path control tests, K0 consolidation, Cyclic Loading, Dynamic Shear strength and deformation, Resilient Modulus, Liquefaction Potential, Shear Modulus, Damping Ratio. The axial loading servo valve capability is 70 Hz. Up to 20 Hz can be reached depending on soil conditions. +/- 10kN cyclic load capacity with readings displayed to 0.1 N.

Send Inquiry
Request To Call Back
Product Image (MT-19088)

Safety Tilt Crucible Furnace

  • Color:Silver Red
  • Dimension (L*W*H):1200 x 800 x 300 Millimeter (mm)
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS -528)

Pycnometer .

  • Color:Transparent
  • Feature:Durable, light weight
  • Material:Glass
  • Power Source:Manual
  • Usage:Laboratory
Send Inquiry
Request To Call Back
Product Image (MTS-101058)

Mechanical Brake System

Price: 10 INR/Piece

Mechanical Brake System : Microteknik is Manufacturer, Exporter & Supplier of Mechanical Brake System Model. Suitably sectionised, full size unit. Complete with operating lever fitted on a vertical and heavy wooden base. With brake pedal and lever.

Send Inquiry
Request To Call Back
Product Image (MTS-10948)

Morgue Room

Price: 1000 INR/Piece

Owing to the dedication of our distinguished professionals, we have gained reputed position across the market as one of the pioneer manufacturers and exporters of Mortuary Chamber. Our offered chambers are manufactured in compliance with industrial standards using superior quality metals. Highly used in hospitals and labs for storing cadaverous under low temperature & cold conditions, we are offering these chambers to our clients in different range. Our Mortuary Chamber is corrosion resistant and appreciated among our clients for its sturdy structure and durability. Mortuary Chamber is specially designed to accommodate cadaverous under cool condition to prevent decomposition and offering vast space saving advantage over the conventional types together with greater hygiene. Double walled with steel panel for outer surface and stainless steel inner chamber with insulation in between, front opening hinged insulated doors lined with magnetic gasket, handle and lock arrangement with keys in duplicate for individual dead travel on rollers fitted with ball bearing for easy movement. Exterior surface of Mortuary Storage Cabinets is chemically treated against coated and duly finished with hammer tone paint. To avoid any moving part in side the cabinet for easier maintenance and cleaning view point, refrigeration unit is kept outside the chamber and fixed at near top. Temperature of -20C to 50C or - 15 to 200C is maintained by hermetically sealed refrigerator unit. Temperature controller is mounted on front panel, provided on front top, along with pilot lamp, main switch etc. supplied complete with trays, cord and plug. Suitable to work on 220 volts AC.

Send Inquiry
Request To Call Back
Product Image (MT-101231)

Gas Turbines or Turbojet Engine

  • Color:Grey
  • Dimension (L*W*H):45x20x25 Centimeter (cm)
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (EM-366)

Student Physiograph

Price: 10 INR/Piece

Student Physiograph SALIENT FEATURES: 1. Unique system of pen motors, Modular easily interchangeable in a minute or two. 2.Pen length standard 120mm for ink writingsystem improving upon the international standard (100mm) as per GRASS or BECKMAN, Shorter pen length would mean greater arc distortions which is synonymous with waveform distortion and arc distortion. Pen length below 100min is not internationally accepted, 3.FREQUENCY RESPONSE: with 120min ink pen length 70Hz-3db. With shorter ink pens 75 or 80min length this response will he appreciably higher. 4.CHART DRIVE -. With completely silent gear train fitted with finest imported synchronous motor free from any backlash. Noisy or large humming gear train or motor can introduce Bio-feedback signals. 5.Z fold chart paper for easy back reference and recording, 6.Ripple free power supply with high stabilization and overload protection. 7.Modular Time & Event channel (optional). CONSOLE: The Horizontal section houses the 10 speed Chart Drive, Galvanometers (Modular) with stabilized ripple free power supply & the vertical sectionhousing the amplifiers and with ink pens andinkwell assembly. Ten Chart Speeds provided are -50, 25, 10, 5, 2, 1, 0.5,0.25, 0.1, 0.05 mm/sec. TRANSDUCERS: 1.Pressure Transducer : Strain Guage Using STATHAM MODEL P23 a range -30 to +300 mm/ Hg. sufficient over pressure protection. APPLICATIONS : Arterial and Venous pressure. 2.Volume Transducer (plethysmography) : For low volume changes (strain guage type). 3.Heart, Smooth Muscle, Isotonic muscleIsometric Force Transducer. 4.Respiration Transducer. 5.Photo-electric Pulse Transducer. 6.Isotonic Transducer ACCESSORIES: 1. EKG Limb electrodes with straps with 4 nos -1 set 2.Chest electrode-1 no. 3.EEG electrode- 8 nos. 4.Pens ink writing - 2 nos. 5.Pens cradles - 2 nos. 6.Ink - 1/21it. 7.Chart Paper ink writing -2 nos. 8.EEG Jelly tube -1 tube. 9.EEG paste -1 jar. 10.3 pin Junction Box -1 no. 11.Earthing Cord -1 no. Couplers: Strain gauge coupler. AC coupler. Pulse Respiration coupler Isotonic coupler.

Send Inquiry
Request To Call Back
Product Image (MTS-10909)

Law Of Conservation Of Mass

Price: 10 INR/Piece

The apparatus consists of an attractive and durable curved track grooved in the middle on which rools a steel ball, can be clamped on the table. A levelling screw is provided under the base to make the lower end of track horizontal. The track carries an adjustable automatic release system to permitting of the ball at exactly the same starting point for multiple runs. An adjustable support attached to base holds the second ball directly in the path of the first, or displaced from the path to cause the collision to occur at different angles and at different distance from the end of the track.

Send Inquiry
Request To Call Back
Product Image (MTS-580)

Vicat needle with Deshpot

Price: 10 INR/Piece

Vicat needle with Deshpot: Same as above but in addition is fitted with a dash pot which facilitates gentle lovering of needles. Salient Features Accessories : Mild steel base plate 5 inches x 5 inches. Fulcrum mould, brass, 70mm I.D base dia x 60mm I.D. top dia, 40mm height.

Send Inquiry
Request To Call Back
Product Image (MTS 552(a))

Split Spoon Sampler

Price: 10 INR/Piece

Split spoon sampler, with brass liner: Same as above but the diameter is increased to accommodate a brass liner. Complete with brass liner. Spares: Body, shoe & Head of split spoon sampler. And Brass liner. Salient Features Accessories : Drive weight 65 kg. with chain. IS: 2131-1963. Drive pipe assembly with two end caps of mild steel to give a fall of 75 cms for drive weight.

Send Inquiry
Request To Call Back
Product Image (MTS-18001)

Base Unit for Sanitary Modules

  • Color:White Black
  • Feature:Durability, Portable
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (EM-363)

Micro Controller Ph Meter

Micro Controller Ph Meter MICRO CONTROLLER pH METER (3 point Calibration) Function PH/mV & Temperature simultaneous Display 16 ch. ï2 lines Alphanumeric BL LCD Power Supply 230 V + 10 % 50Hz Date Entry By soft touch keys with audible Sound Slope adjustment 80% to 120% by Default 100% Temp. Compns. 0 to 100 ï auto with temp Probe Auto Buffer recognition 4.00 PH,7.00 PH,9.20 PH Calibration Auto & Manual,3 point/2 points programmable Time Display Real time 24 hours mode with Date Interface RS-232 & parallel Error indication PH,ORP,CAL,T error

Send Inquiry
Request To Call Back
Product Image (MTS-582)

Vicat Mould Split type

  • Color:Blue
  • Feature:Durable, light weight
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTK-101190)

Automobile Stethoscope

Price: 10 INR/Piece

Automobile Stethoscope : Microteknik is Manufacturer, Exporter & Supplier of Automobile Stethoscope When components of an automobile engine are not functioning properly, they usually sound a warning in the form of noises not common to normal operations. Fortunately most noises possess characteristic! of their own which help to identify the sources, coupled some knowledge of their meaning. Today profession! 560 mechanic likes more to use a stethoscope which accurate and flexible in use. It is similar to one used by doctor and may be used even while driving the car. The unit Is consisting of earphone, amplifier, switch, dry cells 561 and carbon microphone, assembled in a polished wood9l1 box, Furnished with instructions, and a chart of possible different noise, probable source, mike position and how check.

Send Inquiry
Request To Call Back
Product Image (MTS-5045)

Volume Measuring Hollow Shapes

Price: 1 INR/Piece

Volume Measuring Hollow Shapes: Micro Teknik Allows students to relate 2"D shapes to 3"D solids by examining and comparing the removable bases Includes large triangular pyramid, square pyramid, hemisphere, sphere, cone, pentagonal prism, small cube, large cube, rectangular prism, triangular prism and cylinder Fills with liquid or dry"fill for studies of volume, and cleans easily Cleans easily Durable plastic shapes measure 3 cm or 6 cm Activity Guide includes formulas and intervention strategies

Send Inquiry
Request To Call Back
Product Image (MTS-5072)

Identity Set-II (Acrylic)

Price: 1 INR/Piece

Identity Set-II (Acrylic): Micro Teknik We are counted amongst the reckoned names in the industry, offering wide range of Algebra Identity Set-II that are appreciated among the clients for smooth surface and excellent finishing. Our entire product range is durable in nature and is able to cater the individual requirements in most efficient manner. Owing to its exceptional quality attributes our entire product range is treasured in the global market. Features: Abrasion resistant Durable Reasonable price

Send Inquiry
Request To Call Back
Product Image (MTS -531(b))

Proving Ring With Gauge

Price: 10 INR/Piece

Proving Ring With Gauge : The Proving Rings are made up of special steel, carefully forged to give maximum strength and machined to give high sensitivity commensurate with stability, ensuring long life and accuracy. All proving rings are integral type viz. the loading (outside) bosses are forged integral with the ring body. This ensures that there is no possibility of abutment shift and consequent loss of accuracy in reading that always exists with bolted abutments. Repeatability in these Proving Rings is as stipulated in IS:4169. The rings are supplied complete with dial gauge and Works Calibration Chart, individually packed in polished wooden boxes. National Physical Laboratory (NPL), (India)/ National Council for Cement & Building Material (NCCBM )Calibration can also be arranged for any proving ring at an additional cost. Proving rings to meet special requirements are also available on request. Separate polished and ground pair of Loading Pads for Compression Proving Rings and pair of Shackles for Tension Proving Rings are provided to suit each proving ring. We supply Compression Proving Rings, Tension Proving Rings & Tension Compression Proving Ring of different capacities.

Send Inquiry
Request To Call Back
Product Image (MT-101217)

INJECTION PUMP MODEL

Price: 10 INR/Piece

INJECTION PUMP MODELS Fuel injection pumps specifically prepared to enhance training programs for diesel fuel systems.

Send Inquiry
Request To Call Back
Product Image (MTS-16007)

Standard Penetrometer

Price: 10 INR/Piece

Standard Penetrometer: Micro Teknik Used to determine grade of bitumen. The penetration tests determine consistency of bitumen for the purpose of grading Depth in units 1/10 of millimeter to which a standard needle having a standard weight will penetrate vertically in a duration of five seconds at a temperature of 25 C determines penetration for gradation. Consists of a vertical pillar mounted on a base provided with leveling screw The head together with dial gauge rod and cone (or needle) slides on a pillar and can be clamped at required height. A rack and pinion and pointer assembly provides adjustment of needle or cone tip to sample. It incorporates a slipping clutch mechanism which make reading of penetration and subsequent resting a simple and accurate operation The dial is graduated in 400 1/10th mm sub-divisions, and the red needle pointer against black figures makes for easy reading. Supplied complete with one 50 gram weight, and one 100 gram weight and one needle. Accessories Penetrometer Cone : Made of Gunmetal and is fitted with a hardened and ground detachable steel, tip and a stem, Total moving weight is 150 + 0.1 gram. Automatic Standard Penetrometer : Same as above , but supplied with transistorized timer and electro-magnet incorporated in the clutch mechanism to accurately control penetration time to exact five seconds.

Send Inquiry
Request To Call Back
Product Image (MT-101314)

Open Hearth Furnace Model

Price: 10 INR/Piece

Open Hearth Furnace : Microteknik is Manufacturer, Exporter & Supplier of Open Hearth Furnace. The model is cutway in design and clearly labelled. The colour scheme distinctly elaborates the refractory layout of furnace. The unit shows that the regenerator system helps to utilize waste gases and thus ensures economy. The model mostly covers the technical background of the furnace. Complete on approximate 60x45 cm base board.

Send Inquiry
Request To Call Back
Product Image (MTS-449(a))

Capping set Horizontal

Price: 10 INR/Piece

Capping set vertical 150mm The set comprises of a cylinder capper, a cylinder carrier and a ladle. The cylinder capper consists of a base on which two accurately machined plates are mounted vertically. One plate is firmly fixed and the other one is adjustable horizontally. Two plates are provided with holders for holding the cylinder in position. The holder are split and the bottom half of each holder is fixed firmly and the top half of each is removable and bolted down to the lower half. On the upper parts of the vertical plates V s are provided for pouring the capping compound. Two spacers are also provided. Complete with cylinder carrier and ladle for molten compound.

Send Inquiry
Request To Call Back
Product Image (MTS-101066)

Bearing .

Price: 10 INR/Piece

Bearing : Microteknik is manufacturer, exporter & supplier of Bearing A) Ball Bearings (B) Roller Bearing (C) Taper Bearing (D) Thrust Bearing Bearing: Of 25mm size regional bearing duly mounted on polished base.

Send Inquiry
Request To Call Back
Product Image (MTK-301)

Solder Wire

Solder Wire Material Composition: 60/40 Material: Alloy Diameter: 0.02-15mm Coated: Silver Coated

Send Inquiry
Request To Call Back
Product Image (MTSP-13)

Spheres With Ring

Price: 100.0 INR/Set

Spheres With Ring Game of 3 spheres diameter 20 mm with suspension ring, to vary the mass parameter during the study of different types of pendulum. Materials: aluminum, iron, lead.

Send Inquiry
Request To Call Back
Product Image (MTS-9)

Engineers Dumpy Level

Price: 10 INR/Piece

Engineers Dumpy Level : We offer Engineers Dupy Level having U bubble arrangement. There various properties of these levels.

Send Inquiry
Request To Call Back
Product Image (MTK-730)

Bread Board Power Supply

  • Color:Black
  • Dimension (L*W*H):51 x 32 x 19 Millimeter (mm)
  • Power Source:Electric
  • Usage:Laboratory
  • Voltage:6.5-12 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-424(a))

Cone Penetrometer

Price: 10 INR/Piece

Static Cone Penetrometer The drive is by means of a rack and pinion manually through a gearing arrangement. The gear box and pinion are fixed on two handles, sprockets and chain arrangement. The movement of the rack is guided by a bracket ( attached to the rack) and two pillars. The penetration resistance i.e. the pressure is indicated on hydraulic gauges through a hydraulic measuring head. Two pressure gauges of 15cm dia dial and 2 capacities 0-160kg/cm are provided. An automatic cut-off valve, to protect the low capacity gauge from being overloaded is provided. The 2 valve can be adjusted and locked at desirable values between 20 to 60cm . A provision is made to anchor the unit to the ground (with the help of four anchors supplied with the unit) and there is a provision for lateral 2 movement of the unit so that subsequent tests could be performed without shifting the entire anchorage. A 10cm penetration cone with friction jacket is provided along with fifteen mantle tubes (non-uniform having an effective length of 1 m each with sounding rods for finding out the cone (point) resistance or jacket friction.

Send Inquiry
Request To Call Back
Product Image (MTS-42)

Nautical Sextant

  • Color:Brown
  • Feature:Durable, light weight
  • Material:Brass
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTK-751B)

Arc Welder

Arc Welder Complete with electrodes suitable for welding of motor and transformer windings without use of tin.

Send Inquiry
Request To Call Back
Product Image (MTS-457)

Curing Tank .

Price: 10 INR/Piece

Curing Tank (Accelerated) We are a eminent producer of Accelerated Curing Tank which is wide known for its durability. and offered by our industry at most economical rates. These Accelerated Curing Tank includes * Small to large capacity suitable fro 6, 12 and 24 moulds. * Heater immersion type high grade quality having silent zone on. * Better Mineral / Glass wool insulation. * Angle Iron Frame at bottom with castor wheel is provided for easy movement. * Tullu Pump for circulation (Optional)

Send Inquiry
Request To Call Back
Product Image (MTE-772)

Capacitor-Run Motor

Capacitor-Run Motor Single Phase Capacitor Start Capacitor Run Motor 0.37 kW 1400 RPM B3(Foot Mount) 0.37kW (1/2HP) - 1400RPM - 71 frame - B3 foot mounted Full load current 2.8A Capacitor Start Capacitor Run (high starting torque)

Send Inquiry
Request To Call Back
Product Image (MTK-312A)

Timer .

TIMER Phase :Single Phase Number of Poles :4 Pole Mounting Type :Bracket Mount

Send Inquiry
Request To Call Back
Product Image (MTEV-13)

Function Generator Trainer Setup

Function Generator Trainer Setup: MTEV-13 Function Generator Trainer is a versatile training kit for Electrical and Electronics Laboratories. It is designed to explain the fundamentals of Signal Generation. A Function Generator is a product that can produce various patterns of Voltage at a variety of Frequencies and Amplitudes. This Function Generator Trainer allows students to produce the different waveforms and to understand the concept of their generation. FEATURES:- A low cost trainer demonstrating all basic concepts of Function Generator Exclusive presentation and easy illustration of each block Designed considering all safety standards Low sine wave distortion Low variation with temperature Fault creation and troubleshooting Onboard Frequency range display. TECHNICAL SPECIFICATIONS:- Frequency Ranges : Selectable, 1Hz to 10Hz 10 Hz to 100Hz 100 Hz to 1kHz to 10kHz to 100kHz Sine Wave Generation : By Wave Shaping Circuit Switched Faults: 04 Nos. Fuse : 350mA Mains Supply :90-275V,50Hz

Send Inquiry
Request To Call Back
Product Image (JKA-31A)

Student Kymographs Digital

Price: 100.00 INR/Piece

STUDENT KYMOGRAPHS-DIGITAL Micro Teknik is manufacture, exporters & suppliers of : STUDENT KYMOGRAPHS-DIGITAL Student Kymographs (Recording Drum-Digital) Digital Microprocessor controlled 1st time in the world of Pharmacology Digital kyamograph/Sherrington Drum Designed and Manufactured by Microteknik. Detail Description Digital kymographs : 16 x 2 LCD Digital Display with Back Light simultaneous display of all functions on the display and selection through display. Digital Speed Selection Highly Accurate Speed : E/C System Speeds Available -0.12., 0.25, 0, .50, 0.75, 1.00, 1.25, mm/Sec With Accuracy of +/-0.01% Very Low Power Consumption (12 volts 1 Amp.) Operated with Stepper Motor which is highly accurate and run by Microprocessor based program. Special Chrome Plated and Powder Coated Body: Extremely Resistant to Corrosion. Self Lubricating Gear.

Send Inquiry
Request To Call Back
Product Image (MTS-21007)

Universal IC Programmer

Universal IC Programmer Micro Teknik is manufacture, exporter & suppliers FEATURES 1. USB Interfaces.2. Device List Supported 6000+.3. Easy interface to LAPTOP & PC.4. Mouse support, user friendly menu driven software interface5. High speed programming, Cost effective Hardware and Flexible Software6. Supports standard 5V and low voltage devices down to 1.5V7. 48 Pin ZIF socket with universal pin-drivers. to supports 8-pin to 48-pin DIP package device8. Supports Devices ranging including :1. Most E (E) PROM, Series E (E) PROM.Flash2. Gal, Place, PLD9. Micro controllers 87xx / 89xx, PIC16Cxx/17Cxx9. Test: TTL/CMOS Test, Memory Test, Vector Test, Test Pattern Edit, Auto Identify TTL/CMOS Device10. Others: Macro, Options, Environment 11. Automatically Identifies the manufacturer and type of E(E)PROMs12. Device insertion and poor pin-contact check13. Support all operations, such as program,verify, blank check, read, secure, erase and soon.14. Support of Binary, Intel Hex, Motorola S,Tektronix , formats and auto find format15. Support Universal DIP, PLCC, SOIC, SSO Padapters Socket.16. Software Support: Windows-98, XP, 2000, NT.17. Power supply : Input AC 100 to 240V , Output :DC 12V/1.5Amp .

Send Inquiry
Request To Call Back
Product Image (MTS-7)

Prospector Tilting Level

Price: 10 INR/Piece

Prospector Tilting Level : Size 178 mm /7 Internal focusing, anti reflection coated optics with tilting arrangement and Fitted with revolving horizontal circle graduated to read 6 minutes with vernier and a provision to preset zero degree quickly. The tilting drum is graduated to read 1:5000 is incorporated for fine adjustment and accuracy. Supplied with accessories and adjusting tools Packed in PVC Plastic box with Aluminium telescopic stand in carrying canvas cover.

Send Inquiry
Request To Call Back
Product Image (MTS-68)

TRIBRACH .

Price: 10 INR/Piece

TRIBRACH: Tribrach with Circular Bubble without Optical Plummet. For accepting above Adaptor

Send Inquiry
Request To Call Back
Product Image (P-R4)

Rotary Vacuum Flash Evaporator .

Price: 10 INR/Piece

Rotary Vacuum Flash Evaporator (buchhi Type) (Cat No. - P-R4) The apparatus consist of an evaporating flask rotated by non sparking induction motor in a heating water bath. Vacuum distillation of solvent at high and low temps. is achieved quickly and efficiently by use of fixed speed motor, which prevents foaming and bumping of liquid solvent into evaporating flask and also distillation under controlled atmosphere. The evaporating flask is pear shaped to give a large surface area of evaporation and is clamped to a glass duct which goes through the drive unit and protrudes about 120mm into the condenser. The condenser is fitted with standard joint at the top and the bottom for receiver flask. The unit is fitted with a quick action jack. Capacity Available1 Ltr.3, Ltr.5 ,Ltr.10 Ltr. Optional Accessories :- Double walled thermostatic water bath. Digital tmp. controlled water bath.Vacuum Pump.

Send Inquiry
Request To Call Back
Product Image (MTS-17006)

Serum Inspissator

Price: 5 INR/Piece

SERUM INSPISSATOR The Serum Inspissator is made of Stainless Steel triple wall jacketed inner chamber. Mild Steel sheet with powder coating. The temperature is controlled by a thermostat with range from Ambient to 95o centigrade The unit can hold 100 Media tubes.

Send Inquiry
Request To Call Back
Product Image (P-F1M)

Microprocesser Fribility Test Apparatus

Price: 10 INR/Piece

Microprocesser Fribility Test Apparatus Measures the tendency of tablet to chip or breakdown to pieces when held under mechanical stress. Instrument uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproductibility Instument is equipped with 4 line alphanumeric LCD display with backlit and 16no of soft touch membrane type keys. Friability tester can be operated using only one or two drums. The rotational speed of drums can be set at different speeds (20-60rpm). The samples can be loaded conveniently without removing the drums and after the test completion the samples are automatically unloaded to the collectionn tray. To eliminate the manual input of weight of samples, the facility of connecting a weighing scale is also available. When weighing scale is connected the weight of sample is automatically recorded to the instrument from weighing balance. The test can be performed in two different modes Time or Count mode. The instrument stores the test parameters, readings and results simultaneously inn the memory which are retained even after the power is switched off. Provision is also been made for attachment of a printer so as to provide hardcopy printouts of test data, including time, date and calculated results. Specification: Test Methods : Time Count Mode. Speed Of Drums : 20-60 RPM. No Of Drums : 2. Display : 20x4 Alphanumeric Lcd. Keyboard : Soft Touch Membrane Keys, Alphanumeric Mobile Keypad. Counter : 1 TO 9999 Rotations. Timer : 1 SEC TO 9HRS 59MIN 59 SECS. Type Of Drive : Direct Drive With Stepper Motor. Printer : Attachment Of RS232 Printer With Serial Interface. Electrical Supply : 230V AC± 10%, 50/60HZ, 44VA. Advantages : Microprocessor based, easy to use. Complies with USP, IP Specifications. 20 x 4 line alphnumeric LCD display with backlit. 16 soft touch membrane type keys. Independent programmable setups for Time Count mode with storage. Password protected user access. RS232 printer attachment facility. Automatically calculates percentage friability. Loading and unloading of tablets without removing drums. Power failure detection facility. User friendly operation with menus current status indicators.

Send Inquiry
Request To Call Back
Product Image (EM-466A)

Digital Polygraph

Price: 10 INR/Piece

Digital Polygraph RR analysis. Merging of Waves. Integration of Waves. Four channel Lie-Detector. Patient Database information. Real Time data storage & review facilities. Experiments on Animal & Human Subjects. Time & Voltage Marking on individual channel. Optional channel 1 channel 2 channel 3 channel 4 channel 8 channel

Send Inquiry
Request To Call Back
Product Image (MTEE-38)

Protected Speaker

Protected Speaker 8 / 10 W.

Send Inquiry
Request To Call Back
Product Image (P-C4)

Capsule Filling Machine

Price: 10 INR/Piece

Capsule Filling Machine : (P-C4) Capsule Filling Machine : A compact hand operated machine suitable to fill two-part hard gelatine capsules. Main body made of heavy cast iron and all contact parts made of brass richly plated or stainless steel. Handle locking arrangement makes the operator to lift the loading plate without fear of damaging the capsules. Pressing is achieved by cam system which also saves time to press the plunger as compared to screw system. Plate of stainless steel for any one no. Is supplied with machine. For filling 100 capsules.

Send Inquiry
Request To Call Back
Product Image (P-T5)

Tablet Hardness Tester .

Price: 10 INR/Piece

Tablet Hardness Tester (Cat No. - P-T5) Tablet Hardness Tester (Monsanto type) : Useful to take quick readings from 0-20 Kg pressure for hardness. The equipment is made of brass and richly chrome plated. The index and division of reading is 0.1 Kg. Completed in box.

Send Inquiry
Request To Call Back
Product Image (EM-71)

Digital Conductivity Meter

Price: 10 INR/Piece

Digital Conductivity Meter EM-71 CONDUCTIVITY METER Range 0 to 1000 Mhos/cm 5 Range Accuracy 1% FS ±1 Digit Power Requirement 230V AC Spare Conductivity Cell 1./0.5/0.1 Complete with Operation Manual & Dust Cover.

Send Inquiry
Request To Call Back
Product Image (EM-245)

Bio Chemistry Analyzer

Price: 10 INR/Piece

Bio Chemistry Analyzer (Cat No. - EM-245) BIO CHEMISTRY ANALYZER Methods. Absorbency. Mono-Chromatic. Bi-Chromatic. End Point with Standard/Factor. Fixed Time Kinetics. Multipoint Kinetics. Multi Standard up to 8-Standard. Memory Storage Capacity 100 - Tests,8 - Unit. Blue screen 4 x 20 LCD, PCB optimized membrane keypad. Inbuilt thermal printer.

Send Inquiry
Request To Call Back
Product Image (MTS-19020)

Sodium Vapour Lamp Transformer

  • Color:White Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:35 Watt (w)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5069)

Triangle Kit

Triangle Kit: Micro Teknik Triangle Kit (Group Activity Set of 5 Kits) (Acrylic) To teach congruency of triangles, classification of their angles & sides.

Send Inquiry
Request To Call Back
Product Image (MTEE-11)

Potentiometer Potentiometer

Price: 10 INR/Piece

Potentiometer Robust unbreakable polycarbonate Perfectly transparent support housing for better visibility of components The connections of the banana safety cords are made on the side of the case which frees the front of the cords and ensure a better readability of the fixtures. Robustness test : supports a load of 100 kg Dimensions: 100 x 70 x 33 mm. Power: 3 W

Send Inquiry
Request To Call Back
Product Image (MTS-101042)

Cams and Followers Set .

Price: 10 INR/Piece

Cams & Followers Set (a) Plate Cam (with Flat Faced Reciprocating Follower) (b) Tangent Cam (with Roller Oscillating Follower) (c) Cylindrical Cam (with Translating Follower) (d) Translating cam (with Reciprocating Knife Edge Follower) (e) End Cam (with Translating Follower)

Send Inquiry
Request To Call Back
Product Image (MTK-319B)

Capacitor Decade Box

Capacitor Decade Box 10pF to 100¼F

Send Inquiry
Request To Call Back
Product Image (MTS-60)

Digital Planimeter

Price: 10 INR/Piece

Digital Planimeter: We have for our clients a wide range of digital planimeter that are known for their superior quality and ability to display the accurate results. Technology advanced, these survey instruments comes with a clear display. The digital planimeter that we have are used for measuring distances on the maps or drawings.

Send Inquiry
Request To Call Back
Product Image ((Cat No. - EM-57))

Digital Auto Calorimeter

Price: 10 INR/Piece

Digital Auto Calorimeter Specification of Calorimeter Std Glass Filter 8 Minimum Volume 1 ml Display 3 Digit,Red 7 Segment LED Key Board 2 key Soft Touch Membrane Type Range 400-700 nm output OD: 0 to 1.99, %T: 0 to 199 Resolution OD:0.01, %T:1% Accuracy 0.5% FSI Detector Selenium Photocell/Photodiode Main Feature Automatic Zero Calibration

Send Inquiry
Request To Call Back
Product Image ((Cat No. - EM-152P))

Portable Hemoglobin Meter

Price: 10 INR/Piece

Portable Hemoglobin Meter (Cat No. - EM-152P) "TEKNIK" PORTABLE HEMOGLOBIN METER Portable and high performance digital Hemoglobin Meter requires fully automated process. This provides easy, fast & very accurate monitoring of hemoglobin. In this the adjustment or calibration is not needed and ensures to provide results within 15 seconds.

Send Inquiry
Request To Call Back
Product Image (MT-817R)

Radioactivity .

Price: 10 INR/Piece

Radioactivity Range : 0 to 1000 strokes / s Resolution : 1 stroke / s

Send Inquiry
Request To Call Back
Product Image ( JEQ-7)

High Temperature Oil Bath

  • Color:Green White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Heat And Refrigeration System
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (EM-28A)

Eddys Hot Plate

  • Color:Black Silver
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Temperature Range:30-80 Celsius (oC)
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-422)

Concrete Test Hammer in Box

  • Color:Silver
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Civil Engineering
  • Warranty:1 Year
  • Weight:1.4 Kilograms (kg)
Send Inquiry
Request To Call Back
Product Image (JEQ-4F)

Water Bath Incubator Shaker

  • Color:White Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220/230 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTMA-26)

Magnetic Rule Graded on Magnet

Magnetic Rule Graded on Magnet Study of forces and moments PVC ruler on magnet 45 mm. Dimensions: 220 x 45 x 35 mm.

Send Inquiry
Request To Call Back
Product Image (MTS-416)

Benkelman Beam Without Gauge

  • Color:Brown White
  • Frequency:50 Hertz (HZ)
  • Material:Wooden Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTE-PHC6)

Ph Connection Electrode

Price: 10.0 INR/Piece
  • Accuracy:100 %
  • Color:Trasparent
  • Equipment Materials:Glass
  • Feature:Highly Efficient
  • Material:Glass
  • Product Type:Ph Connection Electrode
  • Type:Ph Connection Electrode
  • Weight:10 Grams (g)
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (JEQ-11W)

Walk-in- Incubator

  • Automation Grade:Automatic
  • Color:Silver
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTE-P76)

Pliers .

Pliers Stainless steel Clamping capacity : 0 - 3mm Length : 190mm Rod Ë : 8mm

Send Inquiry
Request To Call Back
Product Image (MTK-202FV)

FREE VORTEX APPARATUS

  • Automation Grade:Automatic
  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (JKA-90)

Heart Lever Starling

HEART LEVER STARLING Micro Teknik is manufacture, exporters & suppliers of : HEART LEVER STARLING Heart lever starling : Nickel frame with nickle-silver spring and notched steel lever. The after-load lever comes with supporting screws & holes for attaching muscles.

Send Inquiry
Request To Call Back
Product Image (JP-5)

Automatic Tissue Processor

  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JKA-145)

Heart Clips

Price: 20 INR/Unit

Heart Clips (Cat No. - JKA-145) Heart Clips consists of following features:- For use with frog heart. Made of stainless steel Pair of two rods Upright rod adjustable

Send Inquiry
Request To Call Back
Product Image ( P-D31)

Dissolution Rate Test Equipment

Price: 10 INR/Piece

Dissolution Rate Test Equipment : P-D31 Same as P-D3 But with following parameter: Digital temperature controller cum indicator. Digital RPM indicator Avaialble in: A. Single test. B. Combined unit for 3 tests. C. Combined unit for 6 tests.

Send Inquiry
Request To Call Back
Product Image (MTUC-26)

Hole .

HOLE Transformer air gap in steel section30 x 30 mm.- Dimensions: 110 x30 x 30 mm.

Send Inquiry
Request To Call Back
Product Image (MT-815M)

Co2 Meter

CO2 METER Range : 0 to 5000 ppm Resolution : 20 ppm

Send Inquiry
Request To Call Back
Product Image (MTMA-24)

Pulley on Magnet

Pulley on Magnet Pulse 50 in plastic, Pulley shaft mounted on bearing. Magnet 40 x 8 mm

Send Inquiry
Request To Call Back
Product Image (JKA-1)

Brodie Starling Kymograph

  • Color:Black
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Lyophilizer Freeze Dryer

  • Color:Silver
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTS-101022)

Pawl and Rachet Motion

Price: 10 INR/Piece

Pawl & Rachet Motion : Microteknik is manufacturer, exporter & supplier of Pawl & Ratchet Motion Showing intermittent motion of a ratchet wheel.

Send Inquiry
Request To Call Back
Product Image (MTE-SG76)

Safety Glasses

Safety Glasses Protection against liquid splashes Compatible with the wearing of prescription glasses Polycarbonate

Send Inquiry
Request To Call Back
Product Image (P-A5)

Ampoule Washing Device

  • Color:Black Silver
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTEE-05)

Lamp With Socket E10

Lamp With Socket E10 Robust unbreakable polycarbonate Housing perfectly transparent support for a better visibility of the components The connections of the banana cords of safety are made on the side of the case which makes it possible to free the facade of the cords and to ensure a better readability of the assemblies. Robustness test: supports a load of 100 kg Dimensions: 100 x 70 x 33 mm.- With 1 bulb 6 V / 100 mA.

Send Inquiry
Request To Call Back
Product Image (MT-813W)

Oxymeter O2 Water

  • Color:Blue
  • Display Type:Digital
  • Feature:Durability, Portable
  • Material:Plastic
  • Power Source:Battery
  • Usage:Hospital Use
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (JKA-210)

Benedict Roth Recording Spirometer

  • Color:White Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MT-814A)

Oxymeter O2 Air

  • Color:White
  • Display Type:Digital
  • Feature:Durability, Portable
  • Material:Plastic
  • Power Source:Battery
  • Usage:Hospital Use
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-820P)

PRESSSIOMETER .

PRESSSIOMETER Range : 0 to 700 KPa (0 to 7 ATM) Resolution : 160 Pa

Send Inquiry
Request To Call Back
Product Image (MTDT-12)

Digital Thermometers

  • Color:Blue
  • Dimension (L*W*H):20 x 200 Millimeter (mm)
  • Display Type:Digital
  • Material:Plastic
  • Power Source:Battery
  • Usage:General lab equipments
  • Voltage:1.5 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-808)

Connecting Leads

Connecting Leads Connecting leads are electricity conducting wires covered in a plastic coated. Connecting Leads with 4mm stack able plug at both ends.

Send Inquiry
Request To Call Back
Product Image (MTK-DD5)

Double Spatula With Spoon

Double Spatula With Spoon Polypropylene reinforced glass fiber Length : 180 mm

Send Inquiry
Request To Call Back
Product Image (MTS-5018)

Junior Maths Lab Kit

  • Application:Lab
  • Color:Multicolor
  • Feature:Durability, Portable
  • Material:Wooden, Plastic
  • Power Source:Manual
  • Delivery Time:1 Week
  • Supply Ability:100 Per Week
Send Inquiry
Request To Call Back
Product Image (MTML-26)

Graduated Metal Lever

Graduated Metal Lever Aluminum lever, graduated and equipped with equidistant plastic pins for the suspension of masses. Two fixing holes allow the realization of stable or unstable balances. Without magnetic support.

Send Inquiry
Request To Call Back
Product Image (MTCD-24G)

Pivoting Hook Dynamometers Graduations

Pivoting Hook Dynamometers Graduations Newton and Gram 1 Color Code Per Measuring Range Zero Adjustment Dimensions: 170 X 20 Mm. Measuring Range: 10n / 1kg Resolution: 0.2 N Pivoting Hook Dynamometers Graduations (MTCD-24H) Newton And Gram 1 Color Code Per Measuring Range Zero Adjustment Dimensions: 170 X 20 Mm. Measuring Range: 20n / 2kg Resolution: 0.3 N Pivoting Hook Dynamometers (MTCD-24I) Newton and gram 1 color code by measurement range Zero adjustment Dimensions: 170 x 20 mm. Measuring range: 30N / 3kg Resolution: 0.5 N Pivoting Hook Dynamometers Graduations (MTCD-24K) Newton And Gram 1 Color Code By Measuring Range zero Adjustment Dimensions: 170 X 20 Mm. Measuring Range: 50n / 5kg Resolution: 1 N

Send Inquiry
Request To Call Back
Product Image (MTS-5050)

Kitchen Balance (plastic)

  • Color:Grey
  • Feature:Durability, Portable
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTK-7762PJ)

PINNED JOINT MODEL

Usage/Application: Laboratory Material: Mild Steel Operation Mode: Manual Packaging Type: Wooden Box Portable: Yes Surface Finish: Polished Country of Origin: Made in India

Send Inquiry
Request To Call Back
Product Image (MTS-5071)

Identity Set-I (Acrylic)

  • Color:Multicolor
  • Feature:Durability, Portable
  • Material:Acrylic
  • Power Source:Manual
  • Usage:Education
Send Inquiry
Request To Call Back
Product Image (MT-809A)

Accelerometer .

Price: 5 INR/Piece

Accelerometer Gramme : -5 to 5 g Resolution : 0.5

Send Inquiry
Request To Call Back
Product Image (EM-71M1)

Microprocessor Based Conductivity And Tds Meter

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Freeze Dryer

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-9001)

Exhaust Gas Analyzing Unit

  • Color:Red
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTK-303)

Digital Multifunction Power Meter

  • Color:Black
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:440 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTK-749)

Bobbin Holder With Column

  • Color:Silver Black
  • Material:Mild Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MT-796)

Electronic tachometer

  • Color:Black
  • Display Type:Digital
  • Feature:Durability, Portable
  • Material:Plastic
  • Power Source:Battery
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-13064)

Impulses Turbine

Price: 10 INR/Piece

Impulses Turbine: Micro Teknik Besides showing the action of a water wheel glass window, the model is capable of running a small dynamo with bulb, working with pressure of water reservoir in college. heavy &solid construction.

Send Inquiry
Request To Call Back
Product Image (EM-36)

Digital Ph Meters

  • Color:Grey
  • Frequency:50 Hertz (HZ)
  • Material:Stainless Steel, Plastic
  • Power Source:Manual
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTMS-52)

Magnetic Stirrers as-01

  • Application:General lab equipments
  • Color:Brown
  • Dimension (L*W*H):132 x 55 Millimeter (mm)
  • Material:Mild Steel
  • Power Source:Electric
  • Voltage:3 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (EM-112)

Digital Flame Photometer

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (EM-36M)

Microprocessor Ph Meter

  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Laboratory Equipment
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTWM-41)

Water Manoscope Set 660g Env

  • Color:White
  • Dimension (L*W*H):130 x 100 x350 Millimeter (mm)
  • Material:Glass
  • Power Source:Manual
  • Usage:General lab equipments
  • Warranty:1 Year
  • Weight:600 Grams (g)
Send Inquiry
Request To Call Back
Product Image (MTEE-31)

TRANSFORMER 6 V / 24 V

  • Color:Golden
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:230 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-808H)

Hygrometer .

  • Automation Grade:Manual
  • Dimension (L*W*H):Approx. 10cm x 10cm x 3cm
  • Display Type:Analog
  • Measurement Range:0% - 100% RH
  • Power Source:Manual
  • Product Type:Hygrometer
  • Type:Hygrometer
  • Weight:Approx. 150g
Send Inquiry
Request To Call Back
Product Image (MT-156U)

Universal Imager Ease

  • Color:Black White
  • Display Type:LCD Display
  • Material:Aluminium
  • Power Source:Electric
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTHC-26)

Helmotz Coil

  • Color:Black White
  • Dimension (L*W*H):400 x 200 Meter (m)
  • Material:Mild Steel
  • Power Source:Manual
  • Product Type:Helmotz Coil
  • Usage:Laboratory
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MTTN-24)

Spectral Tubesdesignation: Neon

Spectral Tubesdesignation: Neon Neon Tube

Send Inquiry
Request To Call Back
Product Image (MTMS-55)

Objects Diffraction: Set of 5 Slides

  • Color:Transparent
  • Dimension (L*W*H):50 x 50 Millimeter (mm)
  • Material:Glass
  • Power Source:Manual
  • Usage:Laboratory
Send Inquiry
Request To Call Back
Product Image (MT-812D)

Dynamometer .

Dynamometer Range : -5 N / 5 N -50 / 50 NR Resolution : 0.003 0.03 N

Send Inquiry
Request To Call Back
Product Image (MTE-MB54)

Metal Blades With Iron Marking

  • Color:Silver
  • Dimension (L*W*H):100 x 19 x 8 Millimeter (mm)
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Laboratory
  • Warranty:No
Send Inquiry
Request To Call Back
Product Image (MTMB-21)

Masses Box 210g

Masses Box 210g 210g Box containing 6 marked masses of aluminum totaling 210 g: 2x10 g, 2x20 g, 50 g, 100 g.

Send Inquiry
Request To Call Back
Product Image (MTS-8006)

Shaft Sensor

  • Color:Black
  • Material:Metal
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-8007)

Submersible Level Sensor

  • Color:Silver
  • Feature:Durability, Portable
  • Material:Stainless Steel
  • Power Source:Electric
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-8011)

Reagent Bottle Nm With Screw Cap

  • Color:Blue
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-435(b))

California Bearing Ratio Test Apparatus

  • Color:Blue Silver
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (MTS-5031)

Transparent Geometrical Shapes

  • Application:Mathematical Equipment
  • Color:Multicolor
  • Feature:Durability, Portable
  • Power Source:Manual
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Tabletop Freeze Dryer Lyophilizer

Price: 150000 INR/Piece

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: i1 Vacuum Degree: i0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTS-21006)

Regulated Power Supply .

Regulated Power Supply ( Multi Output ) Micro Teknik is manufacture, exporters & suppliers Features Hi performance and efficient Power Supply All New international Design Ideal for Educational Institution and Research Labs Constant Voltage and Constant Current Operation Internal Select for Constant or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity protection

Send Inquiry
Request To Call Back
Product Image (MTS-19011)

Photo Diode Characteristics Apparatus

Price: 10 INR/Piece

Photo Diode Characteristics Apparatus Micro Teknik is manufacture, exporters & suppliers To plot a current versus intensity of light at different value of voltages. Instrument consist of DC regulated power supply, two round meters for voltage & current measurement, photo diode mounted separately on the panel, connections of supplies & photo diode brought out at terminals/sockets with light source.

Send Inquiry
Request To Call Back
Product Image (MTS-101256)

Critical Velocity Complete with all Accessories

Price: 10 INR/Piece

Critical Velocity Complete with all Accessories: Micro Teknik Comprising of 5 G. l. pipes each 3 meter long having diameters 12,20, 25,40 and 50 mm and each having two cocks to be connected to a manometer. The whole out fit Is mounted Jon two U shaped steel channels pieces so that it can be fitted vertically against a wall without foundation bolts and without manometer. (B) Collecting Tank for above: Size 80x75x50 cm. Complete with drain cock gauge glass, and scale graduated in cm and litres

Send Inquiry
Request To Call Back
Product Image (JKA-160)

Brodie Operating Table

Price: 10 INR/Piece

BRODIE OPERATING TABLE : JKA-160 Brodie Operating Table : As per the standard Brodie design; top (inch) 51 x 18 x 40 high, fitted all round with cleats; metal hot plate 24 x 12 with heating chamber heated with two electric bulbs; removable (inch) 11x 9 head piece; two stainless steel upright rods sliding in slots; dog holder with its upright and universal joint ; controlling switches. Two partition shelves are provided for accessories etc. Wheels and handles are fitted. The Brodies Anaesthetic Bottle and Air warmer is an optional accessory.

Send Inquiry
Request To Call Back
Product Image (MTS -519)

Length Comparator

Price: 10 INR/Piece

LENGTH COMPARATOR MICROTEKNIK are Manufacturer and Supplier,Exporter Company in India,Length changes of cement paste Description: Metal frame, double-post construction with rust resistant finish. Anvils: One movable and one stationary; shaped to receive contact points in sample bars.

Send Inquiry
Request To Call Back
Product Image (JKA-302)

Mosses Ergograph

Price: 5 INR/Piece
  • Automation Grade:Manual
  • Dimension (L*W*H):Approx. 25 x 15 x 15 cm
  • Frequency:Manual Operation (Not electric)
  • Measurement Range:Up to 40 kg weight
  • Model No:MEG-01
  • Power Source:Manual (Non-Electric)
  • Type:Mosses Ergograph
  • Weight:Approx. 2-3 kg
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-2)

Vernier Transit Theodolite

Price: 10 INR/Piece

Vernier Transit Theodolite : Specifications: Vernier Transit Theodolite German Pattern 10 Sec. Accuracy All Metal Body erect image, coated lens High Range Imported with Powder Coated Colured Deluxe Folding Telescopic Tripod in Cartying case complete with all standard accessories.

Send Inquiry
Request To Call Back
Product Image (JKA-190)

Pneumograph Stethograph

Price: 5 INR/Piece
  • Accuracy:High Precision (2%)
  • Capacity:Standard Laboratory Volume
  • Display Type:Analog
  • Equipment Materials:SS
  • Feature:Portable, Durable, Reusable, Corrosion Resistant
  • Material:Rubber
  • Temperature Range:Room Temperature
  • Usage:Lab
  • Delivery Time:1 Week
  • Supply Ability:100 Per Month
Send Inquiry
Request To Call Back
Product Image (MTS-417)

Core Cutter .

  • Color:Silver
  • Feature:Durability, Portable
  • Material:Stainless Steel
  • Power Source:Manual
  • Usage:Industrial
  • Warranty:Yes
Send Inquiry
Request To Call Back
Product Image (JEQ-4G)

Co2 Incubator Carbon Dioxide Incubator

  • Automation Grade:Automatic
  • Color:White
  • Frequency:50 Hertz (HZ)
  • Material:Mild Steel
  • Power Source:Electric
  • Usage:Industrial
  • Voltage:220 Volt (v)
  • Warranty:1 Year
Send Inquiry
Request To Call Back
Product Image (MT-80042)

Frequency Counter

Specification of Frequency Counter : 8 digit display. Temp coeff 0.3ppm over 18-28 deg C. Input 30 Vdc. Power supply 9V.

Send Inquiry
Request To Call Back
Product Image (MT-80002)

LCD Projector

Specification of LCD Projector : 640x480 pixels Internal light source consisting halogen lamps 36V/400W Power supply 230V-50-60 Hz.

Send Inquiry
Request To Call Back
Product Image (MTS-19018)

Daniel Cell

Price: 10 INR/Piece

Daniel Cell Micro Teknik is manufacture, exporters & suppliers Daniel Cell output Volatge 1.018 VDC.

Send Inquiry
Request To Call Back
Product Image (MTS-19016)

Lechlanchee Cell for Physics And Science Lab Equipments

Price: 10 INR/Piece

Lechlanchee Cell for Physics And Science Lab Equipments Micro Teknik is manufacture, exporters & suppliers

Send Inquiry
Request To Call Back
Product Image (MTS-5068)

Cubes .

Cubes: Micro Teknik (Set of 128 Cubes of 1.5 cms) To prove different Algebraic Identities.

Send Inquiry
Request To Call Back
Product Image (MTS-5056)

Optical Square (Metal)

Optical Square (Metal): Micro Teknik To draw parallel lines in the ground.

Send Inquiry
Request To Call Back
Product Image (MTS-5051)

Screw Gauge (Metal) Micrometer

Screw Gauge (Metal) Micrometer: Micro Teknik Screw Gauge Micrometer Deluxe 25mm x 1mm

Send Inquiry
Request To Call Back
Product Image (MTS-5053)

Ranging Rod (Metal)

Ranging Rod (Metal): Micro Teknik To perform height & distance experiments at the ground level.

Send Inquiry
Request To Call Back
Product Image (MT-19037)

Pillar Drilling Machine

PILLAR DRILLING MACHINE Specification: Max.Drilling -16mm. Chuck Size- 3-16mm. Table Size -300mm. Table Travel- 360mm.

Send Inquiry
Request To Call Back
Product Image (MT-3507)

Universal Milling Machine

Price: 10 INR/Piece

UNIVERSAL MILLING MACHINE Table area : 1500 x 350 mm. Number of T shape slots: 5-16H7. Distance between T shaped slots: 60mm. Rotary Movement of table in both Directors: 45 deg.

Send Inquiry
Request To Call Back
Product Image (MT-101231)

TORQUE CONVERTER

Price: 10 INR/Piece

TORQUE CONVERTER Specification: Teaching model. Effective for understanding centrifugal force, operating principle.

Send Inquiry
Request To Call Back
Product Image (MTS-101068)

Swivel Bearing

Price: 10 INR/Piece

Swivel Bearing : Microteknik is manufacturer, exporter & supplier of Swivel Bearing A properly constructed model.

Send Inquiry
Request To Call Back
Product Image (MTS-101028)

Ellipse Tracer Model

Price: 10 INR/Piece

Ellipse Tracer Model : Microteknik is manufacturer, exporter & supplier of Elipse Tracer Model Properly constructed model to explain the principle.

Send Inquiry
Request To Call Back
Product Image (MT-80018)

Digital Tester

Price: 10 INR/Piece

Specification of Digital Tester : Linear IC tester 16- character, 1-line display Voltage +/-5V Altitude max 5000m Temp range: 5-45 deg C

Send Inquiry
Request To Call Back
Product Image (MTS-71)

Prism And Accessories

Price: 10 INR/Piece

Prism & Accessories: We are a leading Manufacturer & Exporter of Surveying Instruments.

Send Inquiry
Request To Call Back
Product Image (MTS-64)

SETL Digital Theodolite

Price: 10 INR/Piece

Digital Theodolite: Theodolite at a very competitive price Accuracy 2 Sec

Send Inquiry
Request To Call Back
Product Image (MTS-56)

Steel Band Chain

Price: 10 INR/Piece

Steel Band Chain:

Send Inquiry
Request To Call Back
Product Image (MTS-52)

Rain Gauge

Price: 10 INR/Piece

Rain Gauge : with floating rod and stand: Copper Rain Gauge, with 127mm diameter rim. Supplied complete with inner can be measuring cylinder calibrated in mm and inches.

Send Inquiry
Request To Call Back
Product Image (MTS-50)

Garden Survey Umbrella

Price: 10 INR/Piece

Garden Survey Umbrella: Tilting type with steel pole 1.5 meter dia Tilting type with steel pole 2 meter dia

Send Inquiry
Request To Call Back
Product Image (MTS-47)

Delisle Clinometer

Price: 10 INR/Piece

Delisle Clinometer

Send Inquiry
Request To Call Back
Product Image (MTS-39)

Steel Offset Rod

Price: 10 INR/Piece

Steel Offset Rod : Specifications Rod with spring offset printing machine for Man Roland parts 1. Steel 2. With spring 3. Durable 4. Factory price sale

Send Inquiry
Request To Call Back
Product Image (MTS-29)

Octangonal Cross Staff

Price: 10 INR/Piece

Octangonal Cross Staff: We manufacture and supplier of Octagonal Cross Staff as per the set industry Standards.

Send Inquiry
Request To Call Back
Product Image (MTS-12)

Automatic Level and with Stand

Price: 10 INR/Piece

Automatic Level We Offer Auto level imported with Aluminium Stand

Send Inquiry
Request To Call Back
Product Image (MT-19032)

Bench Type Riveting Machine

Price: 10 INR/Piece

BENCH TYPE RIVETING MACHINE Specification: Solid rivet size in M.S. - dia 3 to 8 mm. Hollow rivet size in M.S. & nonferrous solid rivet - dia 3 to 10 mm.

Send Inquiry
Request To Call Back
Product Image (MTS 5)

IOP Level

Price: 10 INR/Piece

I.O.P. Level : We are providing to our client a wide range of I.O.P. Level. These are offering as per client specification or on market leading prices.

Send Inquiry
Request To Call Back
Product Image (MTS-590)

Wood testing machine hand 4 attachment

Price: 10 INR/Piece

Wood testing machine hand 4 attachment:

Send Inquiry
Request To Call Back
Product Image (MTS-589)

Wood moisture meter in box

Price: 10 INR/Piece

Wood moisture meter in box:

Send Inquiry
Request To Call Back
Product Image (MTS -516)

Le Chatelier Flask

Price: 2 INR/Piece

Le-Chatelier Flask: This flask is used to determine the relative density of cement or sand and other fine materials. Neck is graduated 0-1 ml and 18-24 ml, 250 ml capacity.

Send Inquiry
Request To Call Back
Product Image (MTS-495)

Le Chatelier Mould

Price: 10 INR/Piece

Le-Chatelier Mould as per IS: 5514, complete with glass plates & lead weigh

Send Inquiry
Request To Call Back
Product Image (MTS-474)

Displacer Block

Price: 10 INR/Piece

Displacer block:

Send Inquiry
Request To Call Back
Product Image (EM- 36M)

Microprocessor Ph / Temp / Mv Meter

Price: 10 INR/Piece

Microprocessor Ph / Temp / Mv Meter Microprocessor pH / Temp / MV Meter has following features :- Range : pH : 0 to 14 pH. Resolution : 0.01 pH. Accuracy : 0.01 pH(relative).

Send Inquiry
Request To Call Back
Product Image ((Cat No. - EM-81F))

Field Tds Meter

Price: 10 INR/Piece

FIELD TDS METER Specification: Display 3 digit LED. Range 2 range. Accuracy ±2 FS ± 1 digit. Cell Constant Pre-Adjusted. Power 9V Battery

Send Inquiry
Request To Call Back
Product Image (EM-81)

Digital Tds Meter

Price: 10 INR/Piece

TDS METER Specification of TDS Meter Display 3 LED Range 0 to 1000 Ppt 5 Range Accuracy ±1% FS ± 1 Digit Power requirement 220 V AC Complete with Operation Manual & Dust Cover.

Send Inquiry
Request To Call Back
Product Image (EM-61)

Digital Turbidity Meters

Price: 10 INR/Piece

DIGITAL TURBIDITY METER Display : 3 Digit LED Range : up to 1000 JTU Power Requirement : 220V AC Complete with Operation Manual & Dust Cover

Send Inquiry
Request To Call Back
Product Image (JKA-272)

Simple Key

Price: 5 INR/Piece

Simple Key On vulcanite base.

Send Inquiry
Request To Call Back
Product Image (JKA-271)

Dubois Raymond Key

Price: 5 INR/Piece

Dubois Raymond Key Dubois Raymond Key consists of following features:- On vulcanite base with table clamp. Simple key : On vulcanite base.

Send Inquiry
Request To Call Back
Product Image (P-T4)

Tube Crimping Machine

Price: 10 INR/Piece

Tube Crimping Machine (Cat No. - P-T4) Hand lever and sliding movement with toothed jaws, spring action release of jaws.

Send Inquiry
Request To Call Back
Product Image (P-R2)

Rabbit Holder

Price: 10 INR/Piece

Rabbit Holder (P-R2) Rabbit Holder (Wooden): Wooden, box-type, front top lid opening, air-window push system and neck holding arrangement.

Send Inquiry
Request To Call Back
Product Image ( P-O1)

Ointment Slab

Price: 5 INR/Piece

Ointment Slab Ointment Slab is made from imported perspex sheet (graduated) Sizes Available : 6" x 6" and 8" x 8".

Send Inquiry
Request To Call Back
Product Image (P-L2)

Lipstick Molds

Price: 10 INR/Piece

Lipstick Molds : P-L2 Lipstick Molds is made of brass available in 4 holes & 6 holes.

Send Inquiry
Request To Call Back
Product Image (P-H2)

Hand Grind Mill

Price: 10 INR/Piece

Hand Grind Mill Complete on metallic stand having adjustable arrangement for making coarse & fine powder.

Send Inquiry
Request To Call Back
Product Image (P-C5)

Cannulae .

Price: 10 INR/Piece

Cannulae Cannulae : Borosil Glass Arterial Venous Syme Perfusion T-Shaped

Send Inquiry
Request To Call Back
Product Image (P-C2)

Conical Percolator

Price: 10 INR/Piece

Conical Percolator:- Stainless steel jar on stand. Capacity : 500ml, 1 lit. and 2 lit.

Send Inquiry
Request To Call Back
Product Image (MTS-22005)

Two Stage Piston Compressor Unit

Two Stage Piston Compressor Unit: Micro Teknik is manufacture, exporters & suppliers Technical Description The unit provides all necessary data for recording the compressor characteristic and to depict the compression process on a p-V diagram. The pressures and temperatures for both stages are recorded using electronic sensors and indicated on digital displays. The air throughput and the electrical power consumption are also measured. The measured data is transmitted to a PC using a data acquisition card, and further processed on the PC. The unit is equipped with safety devices such as pressure relief valves and pressure switches.

Send Inquiry
Request To Call Back
Product Image (MTS-21012)

1 Ghz Spectrum Analyser

1 Ghz Spectrum Analyser: Micro Teknik is manufacture, exporters & suplliers General Display : CRT 6 Inch. 8 x 10 internal graticule.Trace rotation : Adjustable on front panel.Line Voltage : 220V± 10%, 50-60 Hz.Power consumption : Approx. 25wOperating temp. +10C to +40C Protective System : Safety class 1 (IEC 1010-1).Cabinet : 285 (W) x 125 (H) x 380 (D) mm.Weight : Approx 7 Kg.Accessories Supplied : Instruction Manual, power cord.Optional Accessories : Sniffer Probe: (1. High impedance Probe2. Magnetic field Probe3. Electric Field Probe) Features1. Frequency Range : 150KHz to 1050MHz2. 4 Digit Display : Center & Market frequency,0.1 MHz resolution3. Amplitude range - 100dBm to + 13dBm4. Filters : 20KHz, 250KHz & Video Filter.5. Built-in Tracking generator : 0.15 MHz to 1050 MHz 6. Output Power : + 1dBm to -50dBm (50 ohms)

Send Inquiry
Request To Call Back
Product Image (MTS-21009)

Channel Logic Analyzer Training Equipment

40/80 Channel Logic Analyzer: Micro Teknik is manufacture, exporters & suppliers Features 1. High speed operation (up to 500M samples per second) 2.Up to 80 data input channels 3. Deep data buffers (up to 512K samples per channel) 4. Continuously variable pre / post trigger position 5. 200KW/<5pF high impedance probes minimize interference with test circuit 6. Variable threshold voltage 7. Multiple threshold selections allow different logic types to be worked with t the same time, such as TTL, ECL. 3V logic, CMOS, External trigger output for triggering other instruments, such asoscilloscopes. 8 external high speed clock inputs with user definable combinations for flexible clock qualifying 9. State list display, timing display, and mixed mode display 10. Very high data bandwidth up to 100MHz11. 11. Captures both state and timing simultaneously with one probe 12 Optional very high speed pattern generator with rates up to 100Mpoints/s from 16 to 80.

Send Inquiry
Request To Call Back
Product Image (MTS-21010)

Channel Standalone Logic Analyzer

Price: 10 INR/Piece

32 Channel Standalone Logic Analyzer: Micro Teknik is manufacture, exporters & suppliers Input Channel: 32 data-sampling channels, 1 external clock channel, 3 clock restriction channels Threshold level: 15 individually adjustable threshold levels with the adjusting range of -10V+10V and the resolution of 0.1V Sampling clock: internal, external, rise edge, fall edge Clock restriction: without restriction, 3-channel restriction with the setting of 0, 1, arbitrary for each channel Sampling cycle: 10ns10s [rate 0.1100MSa/s] Resolution: 10ns 32 Channel Standalone Logic Analyzer has sampling signal source: internal, external and storage depth: 32k sampled points for each channel and 117 screens of the movable length. Storage mode includes continuous storage and interval storage [clock restriction]. Storage start-up is manual, conditional and start-up condition: 8 channels with 0, 1 or arbitrary for each channel.

Send Inquiry
Request To Call Back
Product Image (MTS-21001)

Dual Trace Analog Oscilloscope

25Mhz Dual Trace Analog Oscilloscope Micro Teknik is manufacture, exporters & suppliers General Description: The 25 MHz oscilloscope are dual-channel oscilloscope with maximum sensitivity of 5m V / DIV. The time base provides a maximum sweep time of 0.2 uS/DIV. when magnified by 10,the sweep speed is 20nS/DIV. Each of these oscilloscope employs a 6-inch rectangular type cathode-ray tube with redinternal graticule. These oscilloscope are sturdy, easy to operate and exhibits high operational reliability. Features Max. Vertical Sensitivity 1 mV/div TV-V, TV-H Sync Separator Alternate trigger Z axis TTL Level Max. TB Speed.

Send Inquiry
Request To Call Back
Product Image (MTS-19017)

E/m By Short Solenoid Method (Magnatron Method)

Price: 10 INR/Piece

E/m By Short Solenoid Method (Magnatron Method): Micro Teknik is manufacture, exporters & suppliers Features:- Kit Comprises of Low Voltage DC Power Supply unit with Filament Voltage & Solenoid Current controls. Two meters are provided for Anode Voltage controls. One Solenoid Unit Comprises of one Solenoid mounted on wooden stand & Valve 41 is Kept in the Solenoid pipe.

Send Inquiry
Request To Call Back
Product Image (MTS-19014)

Thermistor Characteristics Apparatus

Price: 10 INR/Piece

Thermistor Characteristics Apparatus Micro Teknik is manufacture, exporetrs & suppliers Objective: To plot negative Resistance co-efficient Characteristics of a Glass Thermistor. Features: Instrument comprises of DC Regulated Power Supply 00-10VDC/150mA two round meters for voltage & current measurement, one Glass Thermistor is kept in Oven, connections of supplies, Meters & Thermistor brought out at 4mm sockets. Also provided with Oven with temperature control knob.

Send Inquiry
Request To Call Back
Product Image (MTS-19009)

Helium Neon Laser Light

Price: 10 INR/Piece

Helium Neon Laser Light Micro Teknik is manufacture, exporters & supplier A 2 milliwatt Laser, Mountable on optical bench, with in built power supply workable on 220V AC, 50Hz. Design for continues working. Highly rugged mechanical setup. Up-down motion for beam. Laser Accessories:- 1. Low Line diffraction grating for laser wave length 2. Youngs double slit 3. Hand micrometer 4. Grating stand 5. Laser Filter 6. Set of 13 (Demo Kit) Single taper Slit, Holes A,B,C,D, Grey Filter, Multiple Slit, Circular,Opaque,Spot,Mesh,Multiple Slit 5 Grid Pattern.

Send Inquiry
Request To Call Back
Product Image (MTS-18004)

Pipe Cleaning Training Panel

Pipe Cleaning Training Panel: Micro Teknik is manufacture, exporters & suppliers Technical Description The flushing process is intended to remove contaminants, for example the remnants of solder or sealant from the drinking water pipes. The individual pipe circuits must be flushed from bottom to top. It is possible to observe the flushing action by means of transparent pipe sections. Flushing is performed via two lines that are connected to a cold water supply. Contaminants are introduced into the pipe system through openings with shut-off valves. Original plumbing components are used in the unit. A supply of water is required for operation. The training panel can be fitted to the Universal Stand for Training Panels.

Send Inquiry
Request To Call Back
Product Image (MTS-17004)

Gas Flow Classification

Gas Flow Classification: Micro Teknik - learning the fundamental principle of wind sifting (gas flow classification) - sorting * coarse material fraction * fine material fraction dependent on solid mass flow rate and volumetric air flow rate - classifying * fraction balance * separation function * separation size * sharpness of separation dependent on solid mass flow rate and volumetric air flow rate - pressure losses of * sifter * cyclone dependent on solid mass flow rate and volumetric air flow rate Specification [1] zigzag sifter to separate solid compounds [2] feed hopper with vibrating trough for feed of solid compound into sifter [3] dosage of feed material by way of distance of hopper outlet from vibrating trough and frequency of vibrating trough [4] separation of solid compound into coarse and fine material with air flow in 20-stage zigzag duct [5] air flow generation by fan; adjustment by valve [6] separation of fine material from air flow by gas cyclone with tangential inlet [7] 3 tanks for feed material and coarse and fine materials [8] recording of volumetric air flow rate and differential pressure through sifter and cyclone. Technical Data Vibrating trough - mass flow: max. 10kg/h - vibration frequency: max. 3000min-1 Zigzag sifter - height: approx. 1500mm - cross-sectional area: 40x50mm Cyclone - height: approx. 550mm - diameter: 150mm Fan - volumetric flow rate: max. 600m³/h - power consumption: approx. 3600W Tanks - feed hopper: 3L - coarse material: 2L - fine material: 2L Measuring ranges - cyclone and sifter differential pressures: 0...100mbar - volumetric flow rate (air): approx. 10...100m³/h

Send Inquiry
Request To Call Back
Product Image (MTS-16008)

Stripping Value Apparatus

Stripping Value Apparatus: Micro Teknik A circular tray rotates in a vertical plane at a rate of approximately 100 r.p.m. by an eletrical geared motor. 4 bottles of approximately 400 cc are mounted on this circular tray at an angle of 90 to each other with their mouths towards centre of the tray. A time switch is provided. Suitable for operation on volts A.C. single phase.

Send Inquiry
Request To Call Back
Product Image (MT-19009)

Verticle Milling Machine

MINIATURE VERTICLE MILLING MACHINE Specification: Number of CNC axes 4. Drive Steppers, 2 A, 1,8. Max. positioning speed 300 mm/min. Travel Z/Y 50 mm (expandable)/50 mm. Travel X-axis Q 145 mm (expandable).

Send Inquiry
Request To Call Back
Product Image (EM-354)

Microplate Reader

Price: 10 INR/Piece

MICROPLATE READER Microteknik are offering a wide range of Microplate Reader. Specification of Microplate Reader Microplate readers are instruments which are used to detect and process biological and chemical data using absorbance (enzyme activity, and nucleic acid and protein quantification), luminescence, and fluorescence detection.

Send Inquiry
Request To Call Back
Product Image (MTS-21789)

Sand Replacement Equipment

Sand Replacement Equipment Microteknik are Best manufacturer and Supplier Company in India.Used to determine the dry density of in-situ compact, fine, medium grained soils and for layers not exceeding 50 cm thickness. Specification of Sand Replacement Equipment Used to determine the dry density of in-situ compact, fine, medium grained. soils and for layers not exceeding 50 cm thickness. Equipment parts specifications: Pouring cylinder made of cast aluminum and precisely machined. Calibration container and a tray are made of plated sheet steel.

Send Inquiry
Request To Call Back
Product Image (MTS-101266)

Orifice Meter

Orifice Meter (Cast Iron Body Brass Plates): Micro Teknik We are manufacturers of finest Sharp Edge Orifice Meter in India and also supplies and exporters Sharp Edge Orifice Meter around the world at best prices. To enquire Sharp Edge Orifice Meter, please fill below form. Well be back with you Measurement of two phase flow is very important for geothermal steam field management. Existing measurements techniques are reviewed and the advantages of the sharp edge orifice plate are presented. Existing two phase flow correlations using the orifice plate are examined using field data from several geothermal fields. It was demonstrated that none of the existing correlations can be universally applied without case by case calibration. A new time discreet model was developed and tested and is currently used by the geothermal industry.

Send Inquiry
Request To Call Back
Product Image (MTS-101258 )

Determination of CD,CV and CC Orifices

Price: 10 INR/Piece

Determination of CD,CV & CC Orifices Complete with all Accessories: Micro Teknik (a) Determination of CD,CV & CC Orifices Apparatus (b) Stand for the Apparatus (c) Scale & Sliding Attachment (d) Collecting Tank Overhead tank 45x45x120 cms high is strongly made in steel sheet and angle iron frame with separating pipe, gauge glass and scale graduated In cms and litres, drain cock and overflow. The tank has quick action valve in front having a facing to take the follow interchangeable orifices which are included with the apparatus. Four orifices sharp edged-round, square, rectangular and rectangular and four mouth pieces, convergent, divergen 111 form and re-entrant. (b) Stand for above made of angle Iron and Iron strips stror4l; made. (c) Scale and Sliding Attachment For measuring the curved the out flowing jet. Horizontal and vertical scales are accurate to 1 mm with vernier reading to 1/10 mm. Complete with fix arrangements to the overhead tank. (d) Collecting tank For above, size 8OX80x90 cm in strong steel sheet and angle iron frame work. Complete with a glass gauge and scale calibrated In cms and litres and also a quick drain cock. (e) Collecting Tank Size 80x80x90 cm In strong steel sheet and angle iron frame work divided Into two water light com partments each having a gauge glass and scale calibrated , cms and litres and also a quick drain cock.

Send Inquiry
Request To Call Back
Product Image (MTS-101257 )

Losses in pipe Line Due to Sudden Enlargement

Price: 10 INR/Piece

Losses in pipe Line Due to Sudden Enlargement: Micro Teknik Our company is instrumental in the manufacturing and trading of premium quality Study of Pipe Fittings, Sudden Enlargement & Contraction App These products are manufactured under strict supervision in accordance with the industry set norms and parameters. Offered apparatus is a self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Experiments: To determine loss of head in the fittings at various water flow rates To measure the loss coefficient for the pipe fittings Utilities Required: Electric supply 0.5 kW, 220V AC, Single Phase Water supply Tap water connection  BSP Distilled water @ 60 liters (optional) Floor Area with Drain facility Technical Specifications: Sudden Enlargement: From 15 mm to 25 mm Sudden Contraction: From 25 mm to 15 mm Bend: 1/2 “ Elbow: 1/2 “ Ball valve: 1/2 “ Gate valve: 1/2 “ Instruction Manual: An english instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged in a good quality painted structure

Send Inquiry
Request To Call Back
Product Image (MTS-101255 )

Reynolds Apparatus

Price: 10 INR/Piece

Reynolds Apparatus Complete with Collecting Tank Micro Teknik We are among the trusted names engaged in the manufacturing, trading and exporting of best quality Reynolds Apparatus. The set-up we offer is basically a self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Our professionals manufacture this apparatus in accordance with the industry set parameters using best quality raw materials. This apparatus is used to measure flow rate and is available at affordable market prices.

Send Inquiry
Request To Call Back
Product Image (MTS-101253)

Metacentric Height Apparatus

Price: 10 INR/Piece

Metacentric Height Apparatus Complete with Collecting Tank: Micro Teknik For the purpose of providing the best Metacentric Height Apparatus to our clients, we use raw materials of the finest quality and strictly as per the set industrial standards, the quality standard never deteriorates. Made available in the market at a very competitive price, the offered product of impeccable functionality and efficiency, is one of the best available in the market. Technical Specifications: Pontoon: Size 300 x 300 mm (approx.) with a Horizontal Guide Bar for aliding weight and Removable Strips, Graduated arc with Pointer with moveable hanger And set of weights Water Tank: Size 550 x 500x 400 mm (approx.) Front Window of Tank: Made of Glass/Perspex A set of weights is supplied with the apparatus Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel Pendulum and graduated are for accurate measurement of Tilt angle

Send Inquiry
Request To Call Back
Product Image (MTS-101252)

Bernoulli's Theorem Apparatus

Price: 10 INR/Piece

Bernoullis Theorem Complete with Collecting Tank:

Send Inquiry
Request To Call Back
Product Image (MTS-101439)

Batch Crystallizer

Price: 10 INR/Piece

Batch Crystallizer Micro Teknik DESCRIPTION : Crystallization is the formation of solid particles within a homogeneous phase of saturated liquid. Its wide use has a two-fold basis, a crystal formed from an impure solution is itself pure and crystallization affords a practical method of separating w. This operation involves both heat and mass transfer. Cooling type agitated batch crystallizer set up consists of an open jacketed stirred vessel provided with water heating & cooling arrangement. The feed is prepared in the crystallizer itself with hot water and stirrer. The hot saturated solution in the crystallizer is then cooled by circulation of cooling water and crystals are formed. EXPERIMENTATION: To study the performance of a Batch Crystallizer. To determine the crystal yield and the efficiency of crystallizer. UTILITIES REQUIRED : Water Supply. Drain. Electricity Supply : 1 Phase, 220 V AC, 1.5 kW. Required Chemicals. TECHNICAL DETAILS : Crystallizer (Jacketed Type): Material Stainless Steel , Cap. 2 Ltrs. with conical bottom Stirrer : FHP, Variable Speed. Heater : Nichrome wire heater Cooling Water Tank : Material Stainless Steel , Capacity 30 litre fitted with Pump. Flow measurement : Rotameter for cooling water. Pump : FHP. Receiving Tank : Material Stainless Steel , Capacity 2 litre with SS sieve Temp. Sensors : RTD PT-100 type Control panel comprises of :Digital Temp. Indicator : 0-199.90C with multi-channel switch and Standard make on/off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged in a good quality painted structure.

Send Inquiry
Request To Call Back
Product Image (MTS-101438)

Fluidised Bed Dryer

Price: 10 INR/Piece

Fluidised Bed Dryer Micro Teknik DESCRIPTION : This is a dryer in which moisture removal takes place by fluidization of solids particles by hot air. The set-up fitted with a specially designed, vertical Glass Column. The lower portion of the column is filled with fluidizing material. The material is supported on the screen mesh held between two flanges. Air from a compressor is heated in the heater box and passed through the column. Flow control and by-pass valve are fitted to regulate the airflow. At the top outlet of column a cyclone is provided to collect any solid particles taken out by the air stream. EXPERIMENTATION: To study the fluidized bed drying. To plot the drying curve under fluidized bed condition. UTILITIES REQUIRED : Electricity Supply : 1 Phase, 220 V AC, 3 kW. Granular and free flowing solid of size 1 to 2 mm. TECHNICAL DETAILS : Column : Material Borosilicate Glass Dia. 80 mm. Total Length 500mm. Cyclone Separator : Material Stainless Steel, Compatible Capacity with collector. Air Circulation : By forced draft fan, Arrangement is done vary the air flow rate. Heating Chamber : Compatible capacity Heater : Nichrome wire heater Temperature Sensors : RTD PT-100 type. Control panel comprises of : Digital Temp. Controller : 0 199.9C (For Hot Air) Standard make on/off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged in a good quality painted structure.

Send Inquiry
Request To Call Back
Product Image (MTS-101436)

Forced Draft Tray Dryer

Price: 10 INR/Piece

Forced Draft Tray Dryer: Micro Teknik Our organization holds expertise in offering premium quality Forced Draft Tray Dryer to our valuable customers. Manufactured as per the industry set standards, these forced draft tray dryers are widely used for the purpose of analyzing the rate of drying of wet sawdust. The offered analyzing is performed under a wide range of different temperature conditions. Specifications: Electric supply: Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for weighing scale, 15A, three pin socket with switch for heater Material: Saw dust @ 1Kg. Anemometer: Air flow measurement

Send Inquiry
Request To Call Back
Product Image (MTS-101430)

Absorption In Sieve Plate Column

Price: 10 INR/Piece

Absorption in Sieve Plate Column The setup is designed to demonstrate principles of distillation in a Sieve Plate Column. The column is made of Stainless Steel material with seven sieve trays. An electrically heated re-boiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapors form the top of column are condensed in the shell and tube type condenser by circulating cooling water supplied by laboratory overhead tank. The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation is done for pressure & temp. Measurement wherever is necessary Experiments To study the Sieve Plate Distillation Column Features Stainless Steel tanks and wetted parts Superb Painted structure Simple to operate & maintain Compact & stand alone set up Utilities Required Drain Electricity Supply: 1Phase, 220 V AC, 6.5 kW Required Chemicals Refractrometer for analysis

Send Inquiry
Request To Call Back
Product Image (MTS-101429)

Steam Distillation Setup

Price: 10 INR/Piece

Steam Distillation Setup The equipment consists of jacketed pressure vessel for distillation. Steam from a steam generator can either be allowed to enter in the outer jacket or in the vessel. The vapours form the top of the vessel are condensed in the shell and tube type condenser by circulating cooling water, supplied by laboratory overhead tank. The condensate is collected in a separating chamber. The set-up is fitted with steam trap, control valves, pressure gauge, temperature sensors and other instrumentations required. Steam distillation is used industrially to purify liquids, which are immiscible with water, and to remove bad odors from oils. When water is added to a high boiling liquid immiscible with it, the total pressure exerted by the mixture above the liquid surface will be the sum of the vapor pressures of the pure components and therefore the boiling point of the mixture will be less than that of water at the given temperature. Because of this, even high boiling liquids are made to boil at low temperature and their decomposition is avoided. The steam consumption for steam distillation process is normally high. Experimentation To study the characteristics of Steam Distillation. Efficiency of simple steam distillation set-up.

Send Inquiry
Request To Call Back
Product Image (MTS-101428)

Packed Distillation Column

Price: 10 INR/Piece

Packed Distillation Column The setup is designed to demonstrate principles of distillation in a Packed Column.The column is made of Stainless Steel material packed with Borosilicate Glass rasching rings. An electrically heated re-boiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapors form the top of column are condensed in the shell and tube type condenser by circulating cooling water and it is supplied by laboratory overhead tank. The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation is done for pressure & temp measurement wherever is necessary Experiments To study the Packed Distillation Column Feature Stainless Steel tanks and wetted parts Superb Painted structure Simple to operate & maintain Compact & stand alone set up Utilities Required Water Supply 2 LPM at 5 m head Drain Electricity Supply: 1Phase, 220 V AC, 6.5 kW Required Chemicals Refractrometer for analysis

Send Inquiry
Request To Call Back
Product Image (MTS-101424)

Spray Tower

Price: 10 INR/Piece

Spray Tower The setup is designed to demonstrate principles of spray extraction and mass transfer operation in a column. The set up consists of a glass column, feed tanks, air regulator with pressure gauge, receiving trays and piping. Rotameter are provided for flow measurement Experiments Determination of overall height of a transfer unit and overall volumetric mass transfer coefficient Features Stainless Steel tanks and wetted parts Special arrangement for changing height of interface zone Continuous operation Superb Painted structure Simple to operate & maintain Compact & stand alone set up Utilities Required Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for Compressor Chemicals for trial as per your choice Compressed Air supply: Clean, oil and moisture free air, pressure 2 Bar. Water Supply & Drain as required

Send Inquiry
Request To Call Back
Product Image (MTS-101423)

York Scheibels Extraction Unit

Price: 10 INR/Piece

York Scheibels Extraction Unit The setup is designed to demonstrate principles of extraction and mass transfer operation in a YORK SCHEIBELS column. The set up consists of a glass column, feed tanks, air regulator with pressure gauge, receiving tanks and piping. Rotameter are provided for flow measurement. The glass column is divided into multiple stages; each stage consists of a woven wire mesh (calming) section and a mechanical agitation section. The agitator speed can be varied by drive. The presence of alternatively agitating and calming sections yield higher extraction efficiency than conventional packed column Experiments Determination of overall height of a transfer unit and overall volumetric mass transfer coefficient Features Stainless Steel tanks and wetted parts Special arrangement for changing height of interface zone Continuous operation Superb Painted structure Simple to operate & maintain Compact & stand alone set up Utilities Required Electric supply Provide 230 /- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for Compressor Chemicals for trial as per your choice Compressed Air supply: Clean, oil and moisture free air, pressure 2 Bar. Water Supply & Drain as required

Send Inquiry
Request To Call Back
Product Image (MTS-959)

Dial Thermometer

Price: 10 INR/Piece

Dial Thermometer : Micro Teknik Magnetic dial thermometer made specifically for taking the temperature of railway tracks. It attaches to the rail magnetically to give a quick indication of current rail temperature. Range is -30 to +60C by 1 66mm diameter

Send Inquiry
Request To Call Back
Product Image (P-M6)

Membrane Filter Holder- All glass

Price: 10 INR/Piece

embrane Filter Holder- All glass Borosilicate Glass, with Sintered disc for membrane support and aluminium duck clamp. A: Membrane Filter Holder - All Glass. For Membrane diameter 47mm. Funnel Capacity 300 ml, Flask Capacity 1000 ml. B: Membrane Filter Holder - All Glass. For Membrane diameter 25mm. Funnel Capacity 35 ml,Flask Capacity 250 ml.

Send Inquiry
Request To Call Back
Product Image (MTS-101446)

Fluidized Bed Dryer

Price: 10 INR/Piece

Fluidised Bed Characteristics: Micro Teknik We are leading manufacturer and exporter of a wide range of Fluidized Bed Dryer. The Salt is fluidized, each particle meets the hot air, discharges moisture, gets dry and at the same time travels forward without any mechanical push. We have proven-technology for designing dryers of any capacity. In this state, the solids behave like a free flowing boiling liquid. Clients can avail this products as per there requirements. Scope of Experimentations: To study fluidization characteristics To study relationship between velocity of fluid and pressure drop per unit length Utilities Required: Electricity : 500 watts, 220 V, 1 Phase Floor Area : 0.75 m x 0.75 m Technical Details: Column : Material Borosilicate Glass Packing : Glass Beads Water tank : Material Stainless Steel, Capacity 30 Ltrs Water Circulation : FHP Pump, Crompton/Sharp make Flow Measurement : Rotameter for water Pr. Drop Measurement : Manometer The whole set-up is well designed and arranged in a good quality painted structure

Send Inquiry
Request To Call Back
Product Image (MTS-13060)

Portable Wind Vane

Price: 10 INR/Piece

Portable Wind Vane: Micro Teknik Avery sensitive and newly designed small size unit which can be easily taken any where in open to find wind direction, with aluminium vane and counterpoise weight freely rotating on cast iron base. Without directional letters

Send Inquiry
Request To Call Back
Product Image (MT-101224)

2 Stroke 1 Cylinder Scooter Engine

Price: 10 INR/Piece

2 Stroke 1 Cylinder Scooter Engine : Microteknik is manufacturer, exporter & supplier of 2 Stroke 1 Cylinder Scooter Engine. Manufactured by using top notch materials and latest technology offered products is widely demanded all across the nation. These products are reliable and are cost effective. It is a two stroke single cylinder petrol engine with port timing.

Send Inquiry
Request To Call Back
Product Image (MTS-101208)

Rear Axial Assembly

Price: 5 INR/Piece

Rear Axial Assembly (Actual Cut Section) : Microteknik is is Manufacturer, Exporter & Supplier of Rear Axial Assembly. Description : The differential unit is suitably sectionised to demonstrate the working. Specification : Consisting of original parts such as pinion and bevel, crown wheel, differential gear, shafts and brake drums. Complete fitted on heavy wooden base.

Send Inquiry
Request To Call Back
Product Image (MTS-101207)

Differential Gear Assembly Actual Cut Section

Price: 5 INR/Piece

Differential Gear Assembly (Actual Cut Section) : Microteknik is Manufacturer, Exporter & Supplier of Differential Gear Assembly. Original only dissected differential gear assembly mounted on wooden base with driving handle.

Send Inquiry
Request To Call Back
Product Image (MTK-101206)

Demonstration Differential Gear

Price: 10 INR/Piece

Demonstration Differential Gear (Working Model) : Microteknik is Manufacturer, Exporter & Supplier of Demonstration Differential Gear. True to the original pattern, an all metallic sectionised model showing clearly the manner of action of a differential gear box. The unit is with all milling machine cut gears and essential parts such as rear axle with brake drum and wheel etc. Complete mounted on 45x45 cm wooden base.

Send Inquiry
Request To Call Back
Product Image (MTK-101205)

Demonstration Tractor Differential Working Model

Price: 10 INR/Piece

Demonstration Tractor Differential (Working Model) : Microteknik is Manufacturer, Exporter & Supplier of Demonstration Tractor Differential (Working Model) This unit is fitted with mixing machine cut gears and essential parts as rear axle with extra speed reducing gears. Duly mounted on 45 x 45 cm wooden base.

Send Inquiry
Request To Call Back
Product Image (MTK-101195)

Cooling System Automobile

Price: 10 INR/Piece

Cooling System of an Automobile(with Actual Parts) : Microteknik is Manufacturer, Exporter & Supplier of Cooling System of an Automobile(with Actual Parts) In this model the working of a cooling system of a car is shown with the help of actual parts assembled on a metal stand. All the necessary parts of a cooling system of a car are shown in actual working form. This model helps the student to understand the working of the cooling system of a car very easily. It is specially made dissectible for demonstration purposes.

Send Inquiry
Request To Call Back
Product Image (MTK-101194)

Lubrication System of an Automobile

Price: 10 INR/Piece

Lubrication System of an Automobile : Microteknik is Manufacturer, Exporter & Supplier of Lubrication System of an Automobile. In this model the working of lubrication system of a car is shown with the help of actual parts assembled on a metal stand. All the necessary parts of a lubrication system of a car are shown in actual working form. This model helps the student to understand the working of the lubrication system of a car very easily. It is specially made dissectible for demonstration purposes.

Send Inquiry
Request To Call Back
Product Image (MTK-101192 )

Battery Cell Tester

Price: 10 INR/Piece

Battery Cell Tester : Microteknik is Manufacturer, Exporter & Supplier of Battery Cell Tester. It Is meant for testing voltage of cells and batteries. It is a center zero, light weight voltmeter of low consumption having robust and compact construction, suitable for in-door and outdoor use. It is housed In the tough bakelite case which can conveniently be held In one hand while testing. The movement is of the moving coil type and is sufficiently damped and comes to rest quickly. Range 3-0-3 volts or any range as required.

Send Inquiry
Request To Call Back
Product Image (MTK-101191)

Fully Automatic Battery Charger

Price: 10 INR/Piece

Fully Automatic Battery Charger : Microteknik is is Manufacturer, Exporter & Supplier of Fully Automatic Battery Charger. The Instrument is designed to constant output and has solids taste circuit. provided with short circuit protection and reverse polarity protection Built in a nicely finished metal box with Indicator, and meter.

Send Inquiry
Request To Call Back
Product Image (MTS-101102)

Fuel Supply System 4 Cylinder Diesel Engine

Price: 10 INR/Piece

Fuel Supply System of a 4 Cylinder Diesel Engine : Microteknik is Manufacturer, Exporter & Supplier of Fuel Supply System of a 4 Cylinder Diesel Engine Actual Cut Section Model Motorised This is a working model with original parts, consisting of diesel fuel tank, fuel filter, injection pump and fuel injector. Compete on board. A. With In Line Pump B. With Rotary Pump

Send Inquiry
Request To Call Back
Product Image (MTK-101188)

Fuel Supply System of a Diesel Engine

Price: 10 INR/Piece

Fuel Supply System of a Diesel Engine : Microteknik is Manufacturer, Exporter & Supplier of Fuel Supply System of a Diesel Engine This is a working model with original parts, consisting of Diesel Tank, Filter, Fuel Injector Pump and automizer, complete on board.

Send Inquiry
Request To Call Back
Product Image (MTK-101187)

Fuel Supply System of a Petrol Engine

Price: 10 INR/Piece

Fuel Supply System of a Petrol Engine : Microteknik is Manufacturer, Exporter & Supplier of Fuel Supply System of a Petrol Engine This non working model is consisting of Petrol Tank, Fuel Pump, Filter, Carburetor. Complete on 60x30 cm base with sectionised parts.

Send Inquiry
Request To Call Back
Product Image (MTS-101182)

Educational Car Model

Price: 5 INR/Piece

Educational Car Model Microteknik is Manufacturer, Exporter & Supplier of Educational Car Model (a) Educational Car Model : Handle Driven (b) Educational Car Model : Motor Driven (Fitted with F.H.P. 220 Volts A.C. Motor) (c) Show Case for Above Made of Wooden Frame with Acrylic Sheet Fitted

Send Inquiry
Request To Call Back
Product Image (MTS-101181)

Demonstration Car Chasis

Price: 5 INR/Piece

Demonstration Car Chasis : Microteknik is Manufacturer, Exporter & Supplier of Demonstration Car Chasis The model consists of all essential parts such as steering, front axle, clutch, gear box, gimble joint and differential gear. The model can be actuated by a cank handle and demonstrates thereby the power transmission to the driving wheels. The brakes are actuated by a hand lever. Complete on about 90x45 cm polished wooden base.

Send Inquiry
Request To Call Back
Product Image (MTS-12045)

Determination Of Discharge

Price: 10 INR/Piece

Determination Of Discharge Micro Teknik Size 150x50x3Q cms strongly made i steel and angle iron frame having longitudinal partitions pr vided with arrangement for taking the various interchangeable notches. Complete with hook gauge reading to 1/10 mm. baffle plates, drain cock and with suitable heavy stand. (b) Set of Ten Triangular and Rectangular Notch Plates Made of gun metal, suitable for use with the above weir tank. Dimensions of notches are as under Rectangular Notch Plates Vee Notch Plates Sr. Width Depth S.No. Cms. Angle 1. 5.0 5.0 1. 5.0 90 2. 6.0 6.0 2. 8.0 90 3. 8.0 8.0 3. 12.0 60 4. 12.0 12.0 4. 12.0 55 5. 15.0 15.0 5. 15.0 45

Send Inquiry
Request To Call Back
Product Image (MTK-101179)

Car Engine Petrol Handle Driven

Price: 10 INR/Piece

Car Engine Petrol : Handle Driven Micro teknik is Manufacturer, Exporter & Supplier of Motor Car Engine. The above model fitted with F.H.P. 220 volts A.C. motor. All parts made in aluminium alloy and metal. Ignition is shown by means of a miniature bulb. Carburetter and fuel supply are also sectioned. With a crank handle for manual operation. Mounted on polished wooden base, with printed diagram.

Send Inquiry
Request To Call Back
Product Image (MTS-12034)

Water Finder

Price: 1 INR/Piece

Water Finder MicroTeknik are offering a wide range of Water Finder. Display Type: Digital Measurement Range: 200 M (Deapth) Measuring Frequency: 1 kHz to 9 kHz Power Supply: 4 AAA Batteries 1.5 Volts Operating Temperature: -15 Degree to 60 Degree C Bag Dimensions: 20x15x5 cm Battery Life: 32 work Hours Ground Water Detector offers the high rigor frequency waves that enable it to identify and detection the groundwater so very meticulously where the device can locate the targets from 200 meters distance and an angle of 360 degrees with precise control feature at a horizontal distance search, where there are a several levels of search distance, the user can adjust according to their needs to the horizontal scan, the search depth in the Aqua device can be reach until 200m underground with the possibility of precise control in search depth.

Send Inquiry
Request To Call Back
Product Image (MTS-101079)

Riveted Joints Wooden Model

Price: 10 INR/Piece

Riveted Joints Wooden Models : Microteknik is manufacturer, exporter & supplier of Riveted Joints (Wooden Models) (a) Riveted Joints Triple (b) Riveted Joints Quadruple (c) Riveted Joints Angel Iron & Girder Joints

Send Inquiry
Request To Call Back
Product Image (MTS-10963)

Atwood Machine

Price: 10 INR/Piece

Atwood Machine: Consisting of a full length brass upright graduated pipe upto 200 cm, to be mounted vertically near wall by means of two brackets. A light weight accurate frictionless wheel of 10 cm ala is mounted at its top. Three adjustable clamps move along the rod, upper carrying a ring and lower carrying a plate form and the third on is equipped. with electric release system. The unit is all metallic and complete with two set of failing weights and rider weight.

Send Inquiry
Request To Call Back
Product Image (MTS-10944)

Bending Of Beam Apparatus

Price: 10 INR/Piece

Bending Of Beam Apparatus: It consists of a brass beam 9 mm square one meter long resting on the two knife edges fixed on heavy stands at the bases of which are fitted levelling screws. Acentral knife edge with hanger rests on the beam at the top of which is provided a pin. Complete with a cast iron slotted weights set having two weights of 1 kg, two weights of 1/2 Kg and a hanger of 1 Kg.

Send Inquiry
Request To Call Back
Product Image (MT-28002)

Pipe Threading Tool

Price: 10 INR/Piece

PIPE THREADING TO MICROTEKNIK we are Manufacturer in Pipe thereding threading black gas or galvanized iron pipes SPECIFICATION: Four Cast iron die heads with alloy steel dies. two-piece tubular steel handle. Compact ratchet head. The compact ratchet head is suitable for working close to walls. Packed in blow mould carrying case and display sleeve.

Send Inquiry
Request To Call Back
Product Image (MTS-10925)

Combined Inclined Plane and Friction Slide

Price: 10 INR/Piece

Inclined Plane: The convenience and versatility of this unit has made it very popular. It consists of a 15x60 cm. wooden board with glass top hinged on an Iron base to which a sector with graduated arc and vertical scale Is provided. The plane may be clamped at any angle upto 45 degree. A 5cm dia frictionless pulley Is attached to the end by means of a clamp adjustable to any necessary position. Complete with brass roller, cart and pan but without weights.

Send Inquiry
Request To Call Back
Product Image (MTS-10913)

Compound Lever

Price: 10 INR/Piece

Compound Lever: Comprising of two iron beams connected to each other and fitted on two different stands, well balanced with a scale pan. All metal parts fitted on wooden polishe base. Complete with 1 kg. weight and a physical iron nickelled weight box 1-50 gms.

Send Inquiry
Request To Call Back
Product Image (MTS-70)

Optech Scanner

Price: 10 INR/Piece

Optech Scanner: Optech ILRIS Laser Scanner is fully portable, laser based ranging and imaging system for the commercial survey, engineering, mining and industrial markets. A compact and highly integrated instrument with digital instrument with digital image capture and sophisticated software tools, ILRIS is an industrial leading solution that addresses the needs of commercial users.

Send Inquiry
Request To Call Back
Product Image (MTS-69)

PENTAX TRIBRACH ADAPTOR

Price: 10 INR/Piece

PENTAX TRIBRACH ADAPTOR: Traverse Tribrach Adapter with Optical Plummet 05-3511 2.5X optical plummet 60-second plate vial, adjustable Precision-machined axis rotates 360 Compatible with all prisms with a 24.9 mm bayonet base Adjustable height:100 mm-to-120 mm Fits all standard three-prong tribrachs The over point accuracy is 0.5 mm at 1.5 m

Send Inquiry
Request To Call Back
Product Image (MTS-67F)

Prism Set

Price: 10 INR/Piece

TRIPLE PRISM SET Use: Accessory for total station and theodolite Specifications: To be compatible with theodolite/total station. Zero constant, with target. Supplied with carrying plastic container.

Send Inquiry
Request To Call Back
Product Image (MTS-66)

Pole Holder

Price: 10 INR/Piece

Pole Holder: We are the leading manufacturers and suppliers of high quality Pole Holders for prisms. These have been manufactured using the finest quality of aluminium and brass, in order to ensure their strength and durability. We provide the poles in the shape of a tripod for increased sturdiness while holding prisms and other survey instruments. We also offer customization and can supply these products in accordance with the demands of our clients. The specifications of the Pole holder: Manufactured using fine quality aluminium and brass High on parameters like strength and durability Improved sturdiness while holding survey instruments

Send Inquiry
Request To Call Back
Product Image (MTS-65)

Positioning Electronic Total Station

Price: 10 INR/Piece

Positioning Electronic Total Station: Accessories offered: Battery Battery charger Tool kit with case Plastic carrying case Plastic rain cover and instruction manual Magnification : 30 X Field of view : 1o30 Downloading software with F-4 data transfer cable 1 No. Wooden Tripod 1 No

Send Inquiry
Request To Call Back
Product Image (MTS-62)

Theodolite .

Price: 10 INR/Piece

Theodolite: We bring forth for our customers watts theodolites which are robust scientific instruments extensively employed in surveying and engineering work. These are mainly used for measuring angular values in a traverse or network between survey marks. Watts theodolites can also determine a line of sight along a level plane by combining a spirit level and a telescope. Our range of products is subject to customization to meet the needs of our clients, and can be availed reasonable rates. Watts theodolites is mainly used for: Surveying and engineering work Measuring angular values in a traverse or network Determination of a line of sight along a level plane

Send Inquiry
Request To Call Back
Product Image (MTS-61)

Myzox Auto Level

Price: 10 INR/Piece

Myzox Auto Level: MICROTEKNIK we bring forth a distinguished assortment of Geomax Auto Level. This product is manufactured from the premium quality material and leading technology, under the direction of our experts. The offered product is provided in numerous specifications from us as per customeršžs needs. Our product is tested on various quality parameters by our quality analyst to eradicate all flaws. Features: Automatic air-damped system Cross hairs with stadia lines Optimum finish Specifications: 24x Magnification Erect Image Double sided endless drives 36mm clear objective lens Cross hairs with stadia lines Concave and flat base for 5/8š base screw

Send Inquiry
Request To Call Back
Product Image (MTS-58)

Electronic Total Station

Price: 10 INR/Piece

Electronic Total Station: Telescope. Fully transitting, coaxial sighting and distance measuring optics. Length 154mm. Objective aperture 45mm (EDM:50mm). Magnification 30x. Image Erect.

Send Inquiry
Request To Call Back
Product Image (MTS-54)

Survey Chain

Price: 10 INR/Piece

SURVEY CHAIN Microteknik are Best manufacturer and Supplier Company in India indicate land distances for legal and commercial purposes. 100 braced links. 2 rings per link. 0.10š wire. Cast brass handles. Adjustable calibration and tally tags at š± 10, 20, 30, 40 and centre on side rings. Measuring chains with brass handles and arrows š“ 20 m, 30 m, 40 m and 50m.

Send Inquiry
Request To Call Back
Product Image (MTS-51)

Garden Survey Umbrella Water proof

Price: 10 INR/Piece

Garden Survey Umbrella We offer an excellent quality range of Survey Umbrella in the market. Our clients can avail this product from us at very reasonable prices. The bets quality of Survey Umbrella is offered by us in various sizes and colors. Further, the offered Survey Umbrella is highly demanded among the customers due to its unmatchable quality and high durability. The offered products are quality approved and easily available in the market. Features: Lightweight Easy to carry Pure quality

Send Inquiry
Request To Call Back
Product Image (MTS-49)

Survey Umbrella With special Algencloth superior quality

Price: 10 INR/Piece

Survey Umbrella With special Algencloth superior quality: With special Algencloth superior quality with steel pole size 1.5mm dia with tilting type With special Algencloth superior quality with steel pole size 1.5mm dia without tilting type With special Algencloth superior quality with steel pole size 2.0mm dia with tilting type With special Algencloth superior quality with steel pole size 2.0mm dia without tilting type

Send Inquiry
Request To Call Back
Product Image (MTS-48)

Survey Umbrella .

Price: 10 INR/Piece

Survey Umbrella: With steel pole Size 1.5mm dia with tilting type With steel pole Size 1.5mm dia without tilting type With steel pole Size 2.0mm dia with tilting type With steel pole Size 2.mm dia without tilting type High Quality Survey Umbrella

Send Inquiry
Request To Call Back
Product Image (MTS-46)

Indian Pattern Clinometer

Price: 10 INR/Piece

Indian Pattern Clinometer: Indian pattern Tangent Clinometers with rack & pinion arrangement with face & vane divided in one for elevation and one for depression in degrees and on other side with scale of tangents in carrying case.

Send Inquiry
Request To Call Back
Product Image (MTS-14)

Clinometer Compass

Price: 10 INR/Piece

Clinometer Compass: Clinometer Handle Compass is a reproduction of an antique Clinometer compass. The Handle Compass gets its name from its "handle" shaped sight, which actually serves two purposes: With the compass level, an object can be viewed through the peep sights to determine its magnetic heading. The second and most interesting purpose is when tilting the compass on its side and viewing an object through the sights, its angle of elevation or declination can be found. A weighted pendulous arm beneath the compass needle can be read from one of three scales: Angle in degrees beneath the zenith (from straight up), angle in degrees of elevation or declination, and in inches per yard of slope. The compass has a needle lift mechanism to protect the compass jewel and the pendulous arm when being transported.

Send Inquiry
Request To Call Back
Product Image (MTS-44)

Prismatic Compass with Stand

Price: 10 INR/Piece

Prismatic Compass with Stand Backed with know-how and comprehension in this domain, we are counted amongst the foremost company in this industry and offering quality assured range of Prismatic Compass with Stand. This Prismatic Compass with Stand are precisely made at highly developed production unit by making use of superior quality material and advanced machines in compliance with the industrial quality norms. To meet the requirements of our precious patrons, we offer this product in customized packaging and deliver the same in committed time frame. Features: High grade material Reasonable prices Perfect finish

Send Inquiry
Request To Call Back
Product Image (MTS-43)

Brunton Compass

Price: 10 INR/Piece

Brunton Compass: We offer Brunton Compass (Geological Compass) which is available in a leather or wooden case. This compass differs from modern compasses, as it utilizes magnetic induction damping rather than fluid to dampen needle oscillation. It is widely used by geologists and surveyors to make accurate degree and angle.

Send Inquiry
Request To Call Back
Product Image (MTS-41)

Aluminium Tripod Stand Dual Lock

Price: 5 INR/Piece

Aluminium Tripod Stand Dual Lock Microteknik Manufacturer,supplier and Exporter of aluminum tripod stands that are procured from the trustworthy sources, who make these using high quality raw material such as brass and aluminum. These products are also available in a powder coated finish and are especially developed for providing maximum stability and strength. Moreover, all our products are available in various sizes, shapes and designs to fulfill the diverse needs of our clients.

Send Inquiry
Request To Call Back
Product Image (MT-S40)

Box Sextant With Leather

Price: 5 INR/Piece

Box Sextant : Complete in leather case

Send Inquiry
Request To Call Back
Product Image (MTS-38)

Ranging Rod Metal

Price: 2 INR/Piece

Made of steel pipe for Ranging Rod/Levelling Staff: We are manufacturer,supplier and Exporter of Ranging Rod that made of steel conduct pipe of 25mm dia. Alternatively painted international orange & white. Fitted with strong iron shoe at the bottom. Sizes Available : Size 2 meter single Size 3 meter single Size 2 meter 2 fold Size 3 meter 3 fold.

Send Inquiry
Request To Call Back
Product Image (MTS-37)

Ranging Rod

Price: 10 INR/Piece

Microteknik are Best manufacturer and Supplier Company in India supplier and Exporter of Ranging Rod that made of steel conduct pipe of 25mm dia. Alternatively painted international orange & white. Sizes Available Size 2 meter single Size 3 meter single Size 2 meter 2 fold Size 3 meter 3 fold

Send Inquiry
Request To Call Back
Product Image (MTS-35)

Abney Level Made of Brass pipe

Price: 10 INR/Piece

Abney Level : Made of Brass pipe: This solid brass Abney Level was made by Stanley in London, circa 1940, and consists of telescope eyesight and an adjustable tubular spirit level, which is connected to a semicircular protractor scale and vernier marked in both slope and degrees (90). A magnifier glass assists in accurate reading the degree of inclination from vernier.

Send Inquiry
Request To Call Back
Product Image (MTS-34)

Abney Level

Price: 10 INR/Piece

Abney Level The Hand Level is a small, economical level for use with preliminary surveys to determine traveller way or cable way steel work elevations and other feasibility type site reconnaissance work. The Abney Level is very similar to a clinometer in that it is used to measure the value of a slope by means of arc measure and grade percentage. Specification of Abney Level Used to determine slope angle, tree heights etc Graduated 0-+/-90 degrees, 0-+/-100% on a stationary arc Vernier reads to 10 Scale pointer incorporates friction thumb lock Includes carry case

Send Inquiry
Request To Call Back
Product Image (MTS-32)

Line Ranger

Price: 10 INR/Piece

Line Ranger : Our expertise enables us to develop a broad range of measuring and survey equipment and instruments such as Line Rangers. Manufactured using high grade metal and alloys, these line rangers can be availed in standard as well as customized sizes and specifications. Used for various testing and measuring activities by our clients, our range can be availed at most descent prices.

Send Inquiry
Request To Call Back
Product Image (MTS-30)

Optical Square

Price: 10 INR/Piece

Optical Square : Brass body Aluminium body Set of 50 prepared slides, including plants, insects, and animal tissues, for use in biological education Samples preserved in cedar wood oil and sealed with a coverslip to preserve specimens and prevent contamination Labeling provides specimen identification Slides are composed of optical glass for clear viewing Set comes in fitted wooden storage box to preven

Send Inquiry
Request To Call Back
Product Image (MTS-23)

Plane Table

Price: 10 INR/Piece

Plane Table : We are amongst the pioneer companies engaged in offering a superior quality assortment of Plane Table to the market in a variety of sizes and dimensions. In order to cater to the varying needs and demands of our customers, we provide these products to our customers after stringently testing them on various

Send Inquiry
Request To Call Back
Product Image (MTS-25)

Survey Accessories

Price: 10 INR/Piece

Survey Accessories: Micro teknik engaged in manufacturing and supplying surveying accessories. These are designed using superior quality brass, gunmetal and aluminum and appreciated for their accurate readings and easy installations. Our quality range of products is widely used across the clients based in India and subcontinent. We are only looking for Domestic Queries.

Send Inquiry
Request To Call Back
Product Image (MTS-24)

Accessories For Plane Table

Price: 10 INR/Piece

Accessories for Plane Table : We offer a wide range of very high quality Plane Table Accessories that are suitable for maps preparation and recording topography in various engineering surveys. This outfit consists of a plane table board with a fitted tripod. These products undergo various quality tests at each level of its production to ensure superior quality and flawless performances. These products are basically used in the construction industry for the purpose for surveying the land for commercial use. These products are available at very affordable market price. These products are manufactured using latest technology machinery and skillful group of employees to ensure superior quality. Features: Export quality. Reasonable price. Customer centric organization. Customizable. Specifications: Size: 54 X 34 X 22 + 8 CM. Material: Green Bamboo, Natural and Environmental.

Send Inquiry
Request To Call Back
Product Image (MTS-26)

Plane Table

Price: 10 INR/Piece

PLANE TABLE WITH METAL HEAD Microteknik are Best manufacturer and Supplier Company in India For drawing site plans and maps and various engineering recordings during field surveys Equipment part Specifies dimensional, constructional and performance requirements for a range of spirit level vials - both cylindrical and circular - and describes a recommended method of testing. Plumb bob Complying to ISO 8729:1999. Made of Aluminium/brass Size 100mm, 125 mm, 150 mm dia. Complete in Case with Aluminium Telescopic/Rigid/Wooden Tripod. Aluminium circle consist of a needle graduated to 30min (0.5) graduations Painted with water proof paints. Carrying cases are made of Fibre with carrying straps with a fitted tripod, Size :board 600mmx750mm Plane table board High quality fir wood with hard wood battens (meeting at the back fitted with brass screws and washers, meeting BS 4978:1996 nuts for clamping

Send Inquiry
Request To Call Back
Product Image (MTS-22)

Plane Table

Price: 10 INR/Piece

Plane Table: This is a nice Dietzgen plane table tripod and board setup for your Alidade. The tripod is in great shape, with most of the original laquer finish still present. It has the gimbal-type Johnson head, which attaches to the standard thread common to most plane table boards. The board is larger than most I have seen previously (I will post the actual dimensions in the next day or so) and is in good useable condition. Although there are no major gouges or similar problems, it could probably use a bit of TLC if you are concerned about appearances. All of the peripheral paper lock-down screws are in place and operational. This is an essential accessory for your Alidade, whether you intend to use it in the field, or just for display. ...SOLD!! Sorry, we are selling this as a set...but if you need just the tripod

Send Inquiry
Request To Call Back
Product Image (MTS-19)

Wooden Levelling Staff Telescopic type

Price: 10 INR/Piece

Wooden Levelling Staff Telescopic type: We bring forth an impeccable array of Aluminum Leveling Staff to eminent customers. Products that we come up are ideally used to cater to the various needs and preferences of customers of various construction industry along with others. Therefore, this range is quality tested as per industry laid parameters

Send Inquiry
Request To Call Back
Product Image (P-B7)

Bulk Density Kit

Price: 10 INR/Piece

BULK DENSITY KIT Microteknik are Best manufacturer and Supplier Company in India. are offering a wide range of Bulk Density Kit for civil engineering testing. Bulk density measurement of: Fresh concrete Hardened concrete and Aggregates. Specifications of Bulk Density Kit Manufactured from heavy gauge steel to standards above Accessories Compacting Bar for BS/EN tests Tamping Rod for ASTM tests Cradle for holding specimens Digital top pan balance 4500 g x 0.1 g Digital top loading balance 15 kg x 1 g

Send Inquiry
Request To Call Back
Product Image (MTS-15)

Survey Compass

Price: 10 INR/Piece

Survey Compass: Microteknik are Best manufacturer and Supplier Company in India Compass survey we are Exporter in india and sll places Compass survey is a method of surveying by taking bearings and linear distances to produce plan. Bearing is measured using prismatic compass, while the linear distance is measured using measuring tape. Bearing in compass surveying means angle is made by chain line or survey line by referring it to magnetic meridian or magnetic north.

Send Inquiry
Request To Call Back
Product Image (MTS-45)

Prismatic Compass

Price: 10 INR/Piece

PRISMATIC COMPASS Microteknik are Best manufacturer and Supplier Company in India. obtaining the true north and getting magnetic north Specifications: Made of Aluminium/brass. Size 100mm, 125 mm, 150 mm dia. Complete in Case with Aluminium Telescopic/Rigid/Wooden Tripod. Aluminium circle consist of a needle graduated to 30min (0.5) graduations. Painted with water proof paints. Carrying cases are made of Fibre with carrying straps. Least count 30.

Send Inquiry
Request To Call Back
Product Image (MTS-11)

Automatic Level

Price: 10 INR/Piece

a) Manufactured meticulously using International Standard. b) Tightly sealed construction for use in any weather. c) Fast accurate two-speed focusing. d) Friction-braked rotation and endless horizontal drive. e) Optical sight for quick pointing. f) Metal circular bubble. g) Fit all tripod with G5/8" or M16 screw. Optional accessories: Metal or wooden tripod, metal or wooden staff range pole, measuring rope, plumb etc

Send Inquiry
Request To Call Back
Product Image (MTS-8)

Prospector Tiling Level Standard

Price: 10 INR/Piece

Prospector Tiling Level standard accessories ambala: Features: The PL1 Precision Level is Sokkias most accurate engineers auto level. It is a precision first order tilting level with a optical micrometer. It is used primarily for First Order Leveling and industrial applications requiring the highest degree of precision leveling. Its optical wedge micrometer guarantees precise leveling and accurate measurement, thereby providing easy and fine adjustment of the line of sight. The PL1 eliminates error even under the most difficult surveying conditions. Invar Rods, scales and other industrial accessories are available. This Instrument is available with micrometers reading to 0.1mm or 0.001 in. A short focus model is also available.

Send Inquiry
Request To Call Back
Product Image (MTS-6)

Optical Auto Engineers Level

Price: 10 INR/Piece

Engineers Level : Features Excellent shockproof function. Exclusive closed magnetic field, magnetically-dampened compensator. Friction-braked rotation and endless horizontal drive. Prism for viewing circular vial. Water, dust and dirt proof. Comes with a years warranty. Full back up and repair service available.

Send Inquiry
Request To Call Back
Product Image (MTS-4)

Dumpy Level

Price: 10 INR/Piece

Dumpy Level: Dumpy level with erect image, 20x magnification, in plastic carrying case. Length case. Length 225mm/175mm. Complete with wooden or aluminium folding tripod. Axis made up of aluminium & brass. With telescope 228mm/9š long , Internal focusing, Quick Setting type, Coated optics, ERECT - IMAGE, Very Precise. The horizontal brass circle graduated to read 6 minutes with vernier having provision to preset zero quickly for any desired horizontal direction, All moveable parts including axis set and foot screws are made of gunmetal and brass. packed in Fibre box with Special Powder coated Aluminium telescopic stand in canvas case.

Send Inquiry
Request To Call Back
Product Image (MTS-3)

Electronic Digital Theodolite

Price: 10 INR/Piece

Electronic Digital Theodolite: This cost-effective Electronic Digital Theodolite provides excellent performance, reliable quality and practical operation for any construction application. The body style is similar to a Topcon Digital Theodolite and is combined with easy to use operation. The smart appearance and reasonable structure is as attractive as its price. Tribrach. AA Rechargeable Batteries (4 each). Lens Cap. Operators Manual. Hard carrying case.

Send Inquiry
Request To Call Back
Product Image (MTS-1)

Vernier Tranist Theodolite

Price: 10 INR/Piece

Vernier Transit Theodolite : Matching with the needs of the clients, we provide Vernier Transit Theodolite. The Vernier Transit Theodolite is manufactured using technologically advanced machinery and is known for its accuracy. Promising excellent performance and long functional life, our Vernier Transit Theodolite is high on demand in the market. With their reliable performance, our Vernier Transit Theodolite is totally worth its value.

Send Inquiry
Request To Call Back
Product Image (MTS-587)

Vee-Bee Consistometer

Price: 10 INR/Piece

Vee-Bee consistometer: The instrument is used for workability as well as consistency of fresh concrete. A slump Cone and a graduated rod supplied with the instrument helps the operator to find out slump values and vibration table with container and acrylic disc is used to find out workability of concrete expressed in Vee Bee degrees, which is defined as the time in seconds to complete required vibrating at which the fresh concrete flows out sufficiently to come in contract of the entire face of acrylic disc. Specification: The equipment consists of : A vibrating table size 380mm long and 260mm wide, resting upon elastic support at a height of about 305mm above the floor, complete with Start/Stop switch, cord and plug. A holder is fixed to the base in to which a swivel arm is telescoped with funnel and guide swivel arm is also detachable from the vibrating table. The divisions of scale on the rod record the slump of the concrete in millimeters. Supplied complete with a sheet metal container with lifting handles which can easily be fixed to the vibrating table. A slump cone open at both ends with lifting handles and a tamping rod of size 16mm dia and 600mm long rounded at both ends.

Send Inquiry
Request To Call Back
Product Image (MTS-570)

Soil Lathe Motorised

Price: 10 INR/Piece

Soil Lathe Motorised This instrument is used for preparing soil samples for various tests like Triaxial Test, Unconfined Compression Test etc. Soil lathe consist of a cabinet enclosing motor and gear system which rotates a disk at 24 R.P.M. this disc adopts gripper plate of various size. An up right has an adjustable holder and takes upper gripper plates of different diameters. Arrangement is provided to control height and depth of cutting tool through a lead screw which has speeds 0.8mm/min. And 1.6mm/min. Supplied complete with gripper plate pairs for 38mm, 50mm, 75mm, and 100mm dia specimens.

Send Inquiry
Request To Call Back
Product Image (MTS-568)

Shrinkage Limit App

Price: 10 INR/Piece

Shrinkage Limit App: shrinkage limit is the maximum water content at which a reduction in water content does not cause an appreciable reduction in volume of the soil mass. At shrinkage limit, on further reduction in water, air enters into the voids of soils and thus keeps the volume constant. The apparatus can be used to determine shrinkage limit and to calculate other shrinkage factors like shrinkage ratio, shrinkage index and volumetric shrinkage. set consists of one each porcelain evaporating dish shrinkage dish glass cup perspex plate with three metal prongs perspex plate. flexible spatula glass cylinder 25ml x 0. 5mlsupplied without mercury. Limit Apparatus

Send Inquiry
Request To Call Back
Product Image (MTS-562)

Straight edge with wedge

Price: 10 INR/Piece

Straight edge: Three-metre straight edge and graduated wedge Ensuring a surface is even and smooth once concrete finishing is completed is a vital task for construction professionals eager to leave an accurate and neat job. These straight edges are excellent for measuring the lateral regularity of a road or floor and can be used with aluminium wedge blocks, which allow the user to determine how accurate the work is on the vertical plain as well. At approximately three metres in length, these tools are lightweight, making them easy to transport from job to job. The wedge blocks - which are supplied separately - are fitted to either end of the product, which supports the item as well as providing a set height between the surface and the beam. It is easy to check for irregularities with this item, as it provides the operator with a visual indicator of the evenness of any slab. Optional 2.5 mm incremented wedges are available, which offer a range of 12.5 mm low to 12.5 mm high.

Send Inquiry
Request To Call Back
Product Image (MTS-559)

Static Cone App Hand Operated Cap

Price: 10 INR/Piece

Static Cone App. Hand Operated Cap: We are a prominent Manufacturer and Supplier of Static Cone Penetrometer all over the national arenas. The Static Cone Penetrometer that we provide is largely used in soil testing processes. These Static Cone Penetrometers are skillfully designed using technologically advanced tools and machinery for efficient performance and longer life. Extensive use of static cone penetrometer was originally made in Holland where buildings are constructed in areas mostly reclaimed from the sea -bed. Research work has also been done in recent years to correlate Static Cone Test results with the Standard (Dynamic) Penetration test results, resulting in widely different correlation factors depending upon local geological history. The static Cone Penetration Test is also used for predetermining the length and estimating the load carrying capacities of piles passing through soft -compressible stratas and resting upon hard clays, sands or gravel. The Penetration resistance of the cone has nearly the same value as the load which can be carried by the actual pile per unit area of the pile tip. By using the additional friction jacket with the standard equipment, identification of various soil types penetrated is also possible. In Static Cone Penetration Test, a truncated steel cone(60 degree anglel O sq.cmatbase) is forced vertically into the soil by static thrust required to cause a bearing capacity failure of the soil immediately surrounding the point where measurements are required to be made. Such measurements made at suitable desired intervals, provide a continuous bearing capacity profile and hence a shear strength profile of the soils at the sounding location. The cone point is advanced with a two rod system . The outer casing provides structural strength and protects the inner rod form soil friction and buckling the protected inner rod advances the point during the thrust measurement which is achieved by pressure gauges. The friction jacket (to be ordered extra) helps in obtaining additional information like static soil friction (skin friction) against the steel sleeve. Two types of matle tubes each one meter long are available. The mantle tube w ith a uniform diameter of 36mm enables the determination of total cumulative skin friction of the soil in addition to the cone resistance. lf however cone resistance is the main requirement and cumulative skin friction is not to be measured, then mantle tubes of non uniform diameter are to be used. A judicious combination of both types of tubes would be the ideal one, the number of each depending upon local geological history. The drive is by means of a rack and pinion and is driven manually through a gearing arrangement. The gearbox rack and pinion are fixed on two upright pillars and the movement of the rack is guided by a bracket and two pillars. The loading is done hydraulically. Two pressure gauges 15cm dia. one of low capacity 0-60k9/sq.cm.in 0.5k9/cm. sq. divisions and other 0 -160k9/cm sq. are provided to indicate the penetration resistance. Isolation valve is provided to automatically isolate the lower range gauge when it reaches the maximum capacity. The valve can be adjusted and locked at desired values between 20 to 60kg/cm sq. Provision is made to anchor the unit at site and there is provision for lateral shifting so that subsequent tests could be performed without having to shift the entire anchorage system.

Send Inquiry
Request To Call Back
Product Image (MTS-556)

Sand Absortion Cone And Tamper

Price: 10 INR/Piece

Sand absortion cone & tamper: Introduction: Used for specific gravity and absorption of fine aggregates. The equipment comprises of a conical metal mould 1.5 dia at the top, 3.5š dia at the base and 2.7/8 in height and a metal tamping rod weighing 12 ounces and having a flat circular tamping face 1 dia.

Send Inquiry
Request To Call Back
Product Image (MTS -554)

Sampling Outfit soil specimen

Price: 10 INR/Piece

Sampling Outfit soil specimen: Undisturbed samples of soil at different depths can be collected using these sampling tubes. The kit includes all necessary implements for boring, collection and sealing with wax. The operation may be carried out either using a tripod stand or without it. The equipment is supplied in a canvas carrying bag. Salient Features: For preparing 38 mm dia Soil Specimen. Specifications : The outfit comprises: Sample Extractor, Screw type with a wire sample Timmer. Split Mould, 38 mm dia x 76 mm long. Split mould, 38 mm inch dia x 88 mm inch long (in two parts) can be fitted to the screw type extractor enabiling salt specimens to be prepared ready for unconfined compression test. They are fitted with quick release system. Sampling tube 38 mm dia x 150 mm long. Sampling Tube 38 mm dia x 200 mm long. Jarring link for driving the Sampling Tube. Adaptor with locking screw for fitting the sampling tube to jarring link.

Send Inquiry
Request To Call Back
Product Image (MTS-553)

Sampling Auger Outfit

Price: 10 INR/Piece

Sampling Auger outfit, T piece & handle: Augers are used to collect disturbed soil samples at reasonal depths for laboratory tests. Augers are available in two types and each in different sizes. Blade type (posthole type) and helical type (screw type). Each auger outfit consists one each of auger head, one meter long rod, tee piece and handle. Depth of excavating can be increased using additional extension rods. AUGER POSTHOLE TYPE: (a) 50mm. (b) 75mm. (c) 100mm dia. (d) 150mm dia. AUGER SCREW TYPE: (a) 25mm. (b) 38mm. (c) 50mm. (d) 75mm. (e) 100mm. (f) 150mm. (g) 200mm. (h) 250mm. (i) 300mm dia. EXTRAS :Extension rod 1 meter length with threading at both ends and couplings, set of two spanners and tee piece.

Send Inquiry
Request To Call Back
Product Image (MTS-551)

Swell Test Apparatus

Price: 10 INR/Piece

Swell Test Apparatus It is designed to determine the swelling pressure developed by soil specimens moulded to desired densities at knows moisture contents when soaked in water. The load applied to restrain the swelling is transferred to a load measuring proving ring through a perforated swell plate and a load transfer bar. The proving ring is attached to the lead screw of hand operated load frame. A soaking tank is provided for saturating the specimen and the base of the mould has channels and radial grooves with connecting holes it consists one each of : Specification of Swell Test Apparatus 1. Load Frame, Hand Operated, Capacity 50 KN (5,000 kgf) 2. Mould, 100mm dia x 127.3mm height (1,000ml volume) with base plate and collar 3. Proving Ring, with integral boss, high sensitivity 2.5KN (250 Kgf) capacity 4. Dial Gauge , 25mm travel, 0.01mm least count Lid & receiver in G.I. frame for 300mm dia x 450mm dia sieves 5. Perforated swell plate, 100mm dia x 16mm thick 6. Spencer, 100mm dia x 12.7mm thick 7. Pair of Porous stones, 100mm dia x 12.7mm thick 8. Load Transfer Bar 9. Steel Ball

Send Inquiry
Request To Call Back
Product Image (MTS-550)

Swell Testing Apparatus

Price: 10 INR/Piece

Swell Test App. : Hand operated without ring It is designed to determine the swelling pressure developed by soil specimens moulded to desired densities at known moisture contents, when soaked in water. The load applied to restrain the swelling is transferred on to a load measuring proving ring through a perforated swell plate and a load transfer bar. The proving ring is attached to the lead screw of hand operated load frame. A soaking tank is provided for saturating the specimen and the base of the mould provided has channels and radial grooves with connecting holes.

Send Inquiry
Request To Call Back
Product Image (MTS-549)

Shrinkage Limit Set .

Price: 10 INR/Piece

Shrinkage Limit Set : Shrinkage limit is the maximum water content at which a reduction in water content does not cause an appreciable reduction in volume of the Soil Mass. At shrinkage limit, on further reduction in water, air enters in to the voids of soils and thus keeps the volume constant. The apparatus can be used to determine shrinkage limit and to calculate other shrinkage ratio, shrinkage index and volumetric shrinkage. Specification : Set consists of one each :- 1. Porcelain evaporating dish 2. Shrinkage dish 3. Glass cup 4. Perspex plate with three metal prongs 5. Flexible spatula 100mm 6. Glass cylinder 7. 25ml x 1ml, supplied without mercury OPTIONAL ACCESSORIES: Mercury supplied in bottle of 500 gms. at an extra cost.

Send Inquiry
Request To Call Back
Product Image (MTS 547)

Sand Pouring Cylinder

Price: 10 INR/Piece

Sand Pouring Cylinder (Small size): This apparatus is used for the in place determination of the dry density of compact, line and medium grained soils and for layers not exceeding 50cm thickness. The complete apparatus consists one each of Small sand pouring cylinder, 3 litre capacity fitted with conical funnel and shutter. Cylinder calibrating container, internal dia 10cm and internal depth 15cm dia hole in the centre. Accessories:Metal tray, 30cm square and 4cm deep without hole. Test forms pad of 50.

Send Inquiry
Request To Call Back
Product Image (MTS-525)

Relative Density Apparatus

Price: 10 INR/Piece

Relative Density Apparatus The equipment is used for the determination of the relative density of cohesion less free draining soils and meets the essential requirements. Specification : The equipment consists one each of: Vibratory table, with a cushioned steel vibrating decks about 75cm x 75cm. It has a frequency of approximately 3600 vibratory table, minute under a 11.5kg load. Amplitude is variable in between 0.65mm in step of 0.05 to 0.25mm, 0.25 to 0.45 mm and 0.45 to 0.65mm. Suitable for operations on 415V, Three Phase supply. Cylindrical metal unit weight mould, 3000ml. Capacity.Guide sleeve with clamp assembly. Surcharges base plate for mould. Handle for surcharge base plate. Surcharge weight. The total weight together with surcharge base plate and handle is equipment to 140 kg. /sq. cm. For mould. Cylindrical metal unit weight mould 15000 ml. capacity. (Total weight together with the above mould & surcharge weight is equivalent to 140 kg./sq. cm) dial gauge 0.01mm x 50mm travel. Extension piece 25mm for dial gauge.

Send Inquiry
Request To Call Back
Product Image (MTS -544)

Ring Mould

Price: 10 INR/Piece

Ring Mould: Wondering can someone help I am looking for a 2"x3" ring mould the one without the bottom in it (or a removable bottom) and I need about 20 of them as I want to make individual cheesecakes so wondering is there anywhere they can be gotten cheaply or indeed can you get disposable ones

Send Inquiry
Request To Call Back
Product Image (MTS -538(b))

Pug Mill

Price: 10 INR/Piece

Pug Mill: Description/ Specification of :Dearing Pug Mill Filter press, Diaphragm pump Heavy / Medium / Light duty, Agitator (Stirrer), High speed blunger, Low speed blunger, Pot mill, Rapid mill, Vibrating screen, Pug mill Vertical & Horizontal, Vacuum pump, Rotory kiln, S.S. Ribbon Mixer, Grinding mill. Sample Availability

Send Inquiry
Request To Call Back
Product Image (MTS -536)

Plastic Limit App

Price: 10 INR/Piece

Plastic Limit App: We are providing Plastic Limit Apparatus, which is a useful device to determine the plastic limit and clayeyness of soil. These are mainly catering to the requirements of diverse industries such as used in construction, mining and agriculture. Consists of: Porcelain Evaporating dish 12-15 cm dia, Flat glass plate about 200 mm square, Spatula flexible, with blade about 10 cm long & 2 cm wide stainless steel with wooden handle, Palette knife 15-20 cm long & 2 cm wide. Consists of : Porcelain evaporating dish, shrinkage dish, glass cup, Perspex Prong plate, with three metal prongs, Perspex plain plate, spatula stainless steel with wooden handle, Glass cylinder 25 ml. Accessories: Mercury 500 gram.High speed stirrer with baffle, glass & speed control regulator. Speed 8,000-10,000 RPM. 220V, 1 PH.AC. Spares: Brass cup chromium plated Brass baffle chromium plated

Send Inquiry
Request To Call Back
Product Image (MTS -535)

Plate Bearing Test Apparatus

Price: 10 INR/Piece

Plate Bearing Test Apparatus: We are engaged in manufacturing and supplying Plate Bearing Test Apparatus, which is used for estimating the bearing capacity of shallow foundations in situ and for the design of flexible pavement. This test is a standard technique fro determining bearing capacity of soils and is used in agriculture, defense, education, geophysical/ seismology, irrigation and mining industry. Dynamic Cone Penetrometer (DCP) It is used for rapid in-situ measurement of the structural properties of existing road pavement constructed with unbound materials.The unit incorporates an 8 Kg weight having a drop of 575 mm, fitted to end of the shaft is a 20 mm diameter cone. With the standard DCP measurements can be made down to a depth of approximately 850 mm.Reading are taken after a set number of blows, changing the number according to the strength of layer being penetrated. For good granular bases,readings every 5-10 blows are satisfactory, but for weaker sub-base layers and sub grades, readings every 1-2 blows may be appropriate. The DCP requires Three operators, one to hold the instrument in a vertical position, one to raise the hammer and let it fall and one to record the results. A typical test takes only a few minutes, providing a very efficient method of obtaining information, which would otherwise require the excavation of test pits. Where pavement layers have different strengths, boundaries can be identified and layer thickness determined.Supplied complete in a nice Wooden Carrying Case.

Send Inquiry
Request To Call Back
Product Image (MTS -531(a))

Pocket Pentrometer

Price: 10 INR/Piece

Pocket Pentrometer: This instrument is used to estimate approximate unconfined compressive strength and the estimation to shear strength of soil Cohesive soils can also be classified in terms of consistency using this Penetrometer. This is a handy and convenient instrument. Specification : It consists of a light weight barrel assembly with a polished and ground steel loading piston plunger. A direct reading scale is engraved on the piston barrel and indicates load in kg. / sq. cm. A maximum load indicator ring is provided on the penetration plunger. The calibrated spring is heat treated and plated for rust resistance. The barrel diameter is 20mm and the length 150mm. Supplied with carrying case.

Send Inquiry
Request To Call Back
Product Image (MTS -529(b))

Proctor needle hydraulic type

Price: 10 INR/Piece

Proctor needle hydraulic type: Specification : Comprises hydraulic proctor needle system complete with a pressure gauge fixed at easily readable angle reading 0-70 kg x 2 kg. A set of needle points consisting one each 0.25, 0.5, 1.0, 1.5, 2.0, 3.5 and 6.0 sq. cm. and a wooden carrying case. Hydraulic Type Proctor Needle is identical to spring type Proctor needle except the penetration pressure on the needle is conveyed through a hydraulic pressure gauge 0-70 kg x 1 kg. This system permits a greater control over the rate of penetration because of a better visibility of a load indication. It consists of a body of a bellow housing casing pipe, pressure gauge, Handles, 2 off. Small stem, graduated at 12.5 mm intervals to indicate the depth of penetration and to use needle in smaller areas. One needle point set comprising one each of 0.25, 0.5, 1, 1.5, 2, 3, and 5 sq. cm. Tommy pin. Complete as above in a wooden carrying case.

Send Inquiry
Request To Call Back
Product Image (MTS -529(a))

Proctor Needle Spring Type

Price: 10 INR/Piece

Proctor Needle Spring Type The instrument consists of a needle attached to a spring loaded plunger, the stem of which is calibrated to read 0 to 40 kg division. Long stem is graduated at every 12.5mm to read depth of penetration and for use with needles of larger areas. The small penetration stem is also graduation in 12.5mm division and is used with needles of smaller areas. Needle points one each of 0.25, 0.5, 1.0, 1.5, 2.0, 3.5 and 6.0 sq Cm. And one tommy pin is supplied. Complete as above in a wooden carrying case.

Send Inquiry
Request To Call Back
Product Image (MTS -525)

Moulds Beam

Price: 10 INR/Piece

Moulds Beam : We are one of the leading manufacturers of all types of superior quality moulds. While, the standard size bar moulds are available as ready stock, we also custom design bar mould depending upon the specific requirements of the clients. All our products comply with IS standards and international safety norms. Material Used High grade quality cast iron Iron Available Sizes : Moulds are available in the following sizes : Beam Mould 100x100x500mm 150x150x700mm 150x150x750mm

Send Inquiry
Request To Call Back
Product Image (MTS-524)

Mould Cylindrical

Price: 10 INR/Piece

Mould Cylindrical, 150 mm dia. x 300 mm ht:. For testing concrete cylinders for compressive strength tests. Specification : The moulds is split vertically into two parts. The mean internal diameter in within +/-0.2mm and height is within +/-1mm. The ends are machined to +/-0.05. The base plate and top plate are machined flat to +/-0.03mm. ZI 2017 : Mould cylinder, cast iron, 15cm dia x 30cm height. ZI 2018 : Mould cylinder, cast iron, 16cm dia x 32cm height. ZI 2019 : Mould cylinder, cast iron, 10cm dia x 20cm height. ZI 2020 : Mould cylinder, cast iron, 30cm dia x 60cm height.

Send Inquiry
Request To Call Back
Product Image (MTS-518)

Length Compactor

Price: 10 INR/Piece

Length compactor:without gauge Used to measure the length variations of mortar specimens after autoclave soundness tests. The top beam is adjustable to suit the specimens length. It also measures the linear shrinkage of specimens having different dimensions like: 40x40x160 mm EN 12617-4, EN 12808-4, ASTM C348, UNI 6687, NF P15-433, DIN 1164 25x25x250 mm ASTM C490 70x70x280 mm NF P18-427 75x75x254 mm BS 1881, 6073 50x50x200 mm EN 1367-04

Send Inquiry
Request To Call Back
Product Image (MTS -517)

Length Gauge

Price: 10 INR/Piece

Length gauge MICROTEKNIK are Manufacturer Company in Length gauge in manufacturing Company in india Tile Flexure Strength Tester. IS : 654-1962. For the determination of breaking load of clay roofing tiles. The equipment consists of two bearing rollers and one loading roller all 40 mm dia. The centers of bearing rollers can be set at 250 mm or 270 mm. The loading is done through a double lever loading system. Maximum capacity of the machine is 2 KN. Lever ratio is 1:12. Supplied complete with 20 kg lead shot.

Send Inquiry
Request To Call Back
Product Image (MTS -514)

Le-Chatelier Mould

Price: 10 INR/Piece

Le-Chatelier Mould: We supply technically advanced range of le- chatelier mould which is extensively used for soundness test of the cement. In this apparatus it includes a small split cylinder forming a mould of 30mm internal dia and which is 30 mm high. Two parallel indicating arms with pointed ends are fixed on either side of the fixed cylinder. The mould is offered with two glass plates and lead weights. Moreover, a set of six moulds is supplied in the cardboard box. Our product is fabricated in compliance with IS: 5514 standard and can be delivered on time.

Send Inquiry
Request To Call Back
Product Image (MTS-494B)

Laboratory Vane Shear Apparatus

Price: 10 INR/Piece

Laboratory vane shear app. Hand operated: Specifications: Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotating of the vane is by means of a hand wheel which operates a worm gear arrangement during upper end of calibrated torsion spring. Vane dia, rod dia, vane size & vane height as per IS specifications. The Vane Shaft is attached through the hollow upper shaft to a resetable pointer, which indicates the angle of torque on a dial graduated in degrees. The dial reading multiplied by spring factor gives the torque. A container for soil sample is also supplied, and a sampling tube of 38mm I.D. & 150mm long can also be used as container. Supplied with set of four springs, one each of approx. 2 kg.cm., 4 kg.cm., 6 kg.cm., and 8 kg.cm. Complete as above in a wooden carrying case.

Send Inquiry
Request To Call Back
Product Image (MTS -513(a))

Laboratory Vane Shear

Price: 10 INR/Piece

Laboratory vane shear app. Motorised: Laboratory Vane Shear(Motorized) of: Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of a hand wheel which operates a worm gear arrangement turning the upper end of a calibration torsion spring, vane dia, rod dia, vane size & vane height are as per IS specifications. The vane shaft is attached through the hollow upper shaft to a resettable pointer, which indicates the angle indicates the angle of torque on a dial graduated in degree the dial reading multiplied by spring factor gives the torque a container for soil sample is also supplied & a sampling tube of 38mm. i.d. & 150mm long can also be used as container . Supplied with set of four springs, one each of approx. 2 kgs/cm sq., 4kgs/cm sq., 6 kgs/cm sq. & 8kgs/cm sq. complete as above in a wooden carrying case. Electrically operated rate of rotating is 1/60 R.P.M. Suitable for operation on 230 V A.C. Single Phase.

Send Inquiry
Request To Call Back
Product Image (MTS -512)

Lateral Pressure Assembly

Price: 10 INR/Piece

Lateral Pressure Assembly: It is designed for application of cell pressure up to 10kg/cm on a triaxial specimen in the triaxial cell. The unit is mostly used in routine tests which last for about 10 to 15 minutes wherein the variations of cell pressure can be tolerated. SPECIFICATION : The apparatus consists of a pressure chamber which has a flanged top 2 cap fitted with a 10 kg/cm. Pressure gauge and a valve for pumping in air. Water inlet and drain cock are fitted to the chamber. 2 The foot pump supplied easily develops a pressure of 10 kg/cm2 Complete with connecting pressure hose.

Send Inquiry
Request To Call Back
Product Image (MTS -511)

North Dakota Cone

Price: 10 INR/Piece

North Dakota Cone: We are reckoned as a leading Manufacturer and Supplier based in India. The North Dakota Cone that we offer is largely used for soil testing processes. These North Dakota Cones are skillfully designed in order to meet the set quality standards. Moreover, the clients can avail these North Dakota Cones at very reasonable rates in the markets. Specifications : The instrument consists of a rod carrying a loading platform at the top and a hardened steel cone at the bottom. The rod is mounted vertically and slides freely up and down in the collars of the frame and can be locked in any position as required. The conical tip penetrates the soil through an aperture in the cast iron base. The loading platform carries a graduated plunger which enters one of the side supports and permits the reading of the penetration correct to 1 mm. Supplied with set of weights consists 7 nos. 5 kg weights and one hardened steel cone. Attributes : Easy to use Accuracy Superior quality Longer life

Send Inquiry
Request To Call Back
Product Image (MTS -509)

Load Frames

Price: 10 INR/Piece

Load Frames: Load Frame Mechanical, 50 kN, hand operated Load Frame, 50 kN Motorised, single speed (Bench Type) Load Frame, 50 kN Motorised, but Housing Type Body (Covered) Load Frame, 50 kN Motorised, 3 speed (Bench Type) Load Frame, 50 kN Motorised, 6 speed (Bench Type) Load Frame, 50 kN Motorised, 8 speed (Bench Type) Load Frame, 50 kN Motorised, 30 speed (Bench Type) Load Frames are used to apply load on the test specimen. The capacity and speed depends on the requirement of a particular test. Load Frames are used in C.B.R. Triaxial, Unconfined Compression Test etc.

Send Inquiry
Request To Call Back
Product Image (MTS -507A)

Kelly Ball Penetration Apparatus

Price: 5 INR/Piece

liquid limit device hand operated: Used to determine the moisture content at which clay soils pass from a plastic to a liquid state. Comprises removable brass cup, adjustable crank and cam mechanism, blow counter, and base. Two versions available: hand operated and motor operated. Supplied complete with plastic grooving tool according to the reference standard ordered. The metal or brass grooving tool has to be ordered separately.

Send Inquiry
Request To Call Back
Product Image (MTS -504)

Jodhpur Permeability

Price: 10 INR/Piece

Jodhpur Permeability: Container ring of 100mm diameter and 500mm high, held between a bottom plate and a water cell. The water cell of 10mm diameter brass cylinder and the top and bottom plates of brass or any other non-corroding metal.Each cell with collar is clamped in between a base plate and a top plate with the help of tension rods and nuts. The cell assembly is mounted on the stand. The top plate is provided with an inlet and air release vent and the base plate is provided with an outlet. Complete with a pressure chamber fitted with a pressure regulator and pressure gauge 0-7 kg/cm sq. indicating the test pressure with single gauge without air compressor and foot pump.Three cell Model.Six cell Model

Send Inquiry
Request To Call Back
Product Image (MTS -503)

Jolting App

Price: 10 INR/Piece

Jolting App: Apparatus. For making standard rectangular specimens of 40 x 40 x 160mm. of Portland and pozzolana cement mortal for determining the transverse strength. Specifications: The jolting apparatus consists of a rectangular table rigidly...

Send Inquiry
Request To Call Back
Product Image (MTS -502)

Gillmour Needle Astm

Price: 10 INR/Piece

Gillmour needle astm.: This instrument is used for determining the time setting of hydraulic cement. Specification: A base with a Vertical shaft and Two horizontal arms. The lower arms is adjustable for height. 1 no. Initial needle 1/12-inch dia ¼ lb. Wt. 1 no. Final needle 1/24 inch dia. ¼ lb. Wt. 1 no. Glass base plate. Complete as above.

Send Inquiry
Request To Call Back
Product Image (MTS -500)

Infra Red Moisture Balance

Price: 10 INR/Piece

Infra-Red Moisture Balance: A basic method for determination of moisture content, measure percent by weighing and drying simultaneously. Infra Red radiation are reflected by a bulb and its temperature is controlled by a regulator. The balance scale is divided in terms of moisture content on wet weight basic. Work on 220V 50Hz AC mains. Specifications:- Range : 0-100% Accuracy : 0.2% Weight : 20 Kg. Sample weight : 5gm, 20gm, 25gm

Send Inquiry
Request To Call Back
Product Image (MTS -479)

Grain Size Analysis Apparatus

Price: 10 INR/Piece

Grain Size Analysis App., Pipette method: This is for the determination of their sub sieve particle distribution in a soil sample by mechanical analysis. An analysis of this kind expresses quantitively the proportions by weight of the various sizes of particles present in the soil. It is recommended as a standard procedure to use dispersion agent to avoid floculation. Specifications: The apparatus consists of a sliding panel which moves up and down by means of a screw allowing Anderson pipette fixed to it to be raised or lowered vertically. A sedimentation tube is held by a laboratory clamp provided on the stand below the pipette. The depth of immersion is measured by a scale graduate in mm at the side of the sliding panel. Supplied complete with Anderson pipette 10 ml. at the side capacity made from glass, and a sedimentation tube also of glass of 500 ml capacity and 50 Nos Test forms. Accessories and Spares: 1) Sedimentation pipette (Anderson pipette) 25 ml. 2) Sedimentation tube 1000 ml. 3) Sedimentation pipette 10 ml. 4) Sedimentation tube 500 ml. 5) Test forms pad of 50.

Send Inquiry
Request To Call Back
Product Image (MTS -497)

Grain Size Analysis Ap

Price: 10 INR/Piece

Grain size analysis Ap. (Pippette method): This is for the determination of the sub sieve particle distribution in a soil sample by mechanical analysis. An analysis of this kind expresses quantity the proportions by weight of the various sizes of particles present in the soil. It is recommended as a standard procedure to use dispersion agent to avoid flocculation. The apparatus consists of a sliding panel which moves up and down by means of a screw allowing Anderson pipette fixed to it to be raised or lowered vertically. A sedimentation tube is held by a laboratory clamp provided on the stand below the pipette. The depth of immersion is measured by a scale graduated in mm at the side of the sliding panel. Supplied complete with Anderson pipette 10ml. At the side capacity made from glass, and a sedimentation tube also of glass of 500ml capacity and 50nos. Test form pads. ACCESSORIES & SPARES : 1) Sedimentation Pipette (Anderson pipette) 25ml. 2) Sedimentation tube 100ml 3) Sedimentation pipette 10ml 4) Sedimentation tube 500ml 5) Test forms pad of 50

Send Inquiry
Request To Call Back
Product Image (MTS-474)

Flexture Testing Machine

Price: 10 INR/Piece

Flexture testing machine 10 Tonne hand operated Flexural Testing Machine (Hand Operated) The machine consists of a hand frame. The lower platen has two rollers the distance between which is adjustable For 150 mm x 150 mm x 700 mm beam. the centre distance between rollers is 600 mm, while it is 400 mm for beams of size 100mm x 100mm x500mm. The upper platen has also a pair of rollers whose distance is adjustable. It is 200mm centre to centre, for 150mm x 150mm x 700mm size beam and 133 mm for 100 mm x 100 mm x 500 mm size beam. A pressure gauge to indicate load is fixed on the load frame. A small pumping unit is attached to the load frame. Total capacity of the machine is 100 KN and a 150mm dia pressure gauge 0-100 KN x 1 KN is fitted on the machine Since this is a hand operated light weight machine, its is useful for field laboratory also.

Send Inquiry
Request To Call Back
Product Image (MTS-487(a))

Flow Table Hand Operated Steel Top

Price: 10 INR/Piece

Flow Table Hand Operated Steel Top: Consists Of : Circular Glass Tableš30 Mm With Conical Mould Centring Engraving. Steel Base With Tripod Shape And Crank Throw For A Drop Height Of 10 Mm. Delivered Complete With A Cast Bronze Mouldš100 Mm Et One Tamper. Dimensions : 300 X 290 X 300 Mm. Weight : 20 Kg.

Send Inquiry
Request To Call Back
Product Image (MTS-468)

Extractor Frame Universal Screw Jack Operation

Price: 10 INR/Piece

Extractor Frame Universal screw jack operation: Extractor Frame Universal Screw Type Designed to extract specimens from almost every type of sampling tube and mould used in solid engineering laboratory or in the field. It can be mounted vertically or horizontally as desired. It has an unique feature that three 38mm dia sample. SPECIFICATION:Comprises of a frame designed for screw jack operation, one each of the adaptors for 38mm, 75mm, 100mm, 150mm dia meter specimens and a stand to obtain simultaneously three 38mm diameter samples from one 100mm diameter sample. The adaptor plate which slides along the slotted support can be claimed at any desired position by means of locking nuts. Besides this, the tube or mould can be held in position by raising the tube guides and held in position with locking screws. The lead screw movement can be stopped at any predetermined position by tightening the lead screw collar. Plunger adaptor for 200mm dia samples. Adaptor plate with 200mm dia hole and device to extract b number 38mm dia samples.

Send Inquiry
Request To Call Back
Product Image (MTS-466)

Extractor Frame Hydraulic .

Price: 10 INR/Piece

Extractor frame hydraulic: This extractor Frame is used for taking ut soil samples compacted or undisturbed, from 100 mm dia and 150 mm dia cylinders such as core cutters, Proctor moulds, C.B.R. moulds etc. Salient Features Specifications : It consists of a 5 Tone capacity hand operated, hydraulic jack mounted on a suitable frame. Two plungers, one for 100 mm dia and the other of 150 mm dia moulds are supplied. One thrust plate for 150 mm dia and one for 100 mm dia specimens are also supplied. Height of thrust plate is adjustable. Accessories: Set of Plungers adaptors and thrust plates for 38 mm, 50 mm and 75 mm dia specime.

Send Inquiry
Request To Call Back
Product Image (MTS-479)

Extractor Frame

Price: 10 INR/Piece

Extractor Frame: Extractor Frame for 38 mm hand with mould Extractor Frame Hydraulic This extractor Frame is used for taking ut soil samples compacted or undisturbed, from 100 mm dia and 150 mm dia cylinders such as core cutters, Proctor moulds, C.B.R. moulds etc. Salient Features Specifications : It consists of a 5 Tone capacity hand operated, hydraulic jack mounted on a suitable frame. Two plungers, one for 100 mm dia and the other of 150 mm dia moulds are supplied. One thrust plate for 150 mm dia and one for 100 mm dia specimens are also supplied. Height of thrust plate is adjustable. Accessories : Set of Plungers adaptors and thrust plates for 38 mm, 50 mm and 75 mm dia specimen.

Send Inquiry
Request To Call Back
Product Image (MTS-476)

Dorry Abrasion Testing Machine

Price: 10 INR/Piece

Dorry Abrasion Testing Machine: This machine used for determining the resistance of aggregate to wear by simultaneously and then kept loaded by weights against a machined flat circular grinding surface. The grinding disc rotates at 28-30 r.p.m and two funnels release a continuous flow of operation on 230 Volts, Single phase 50 Cycles A.C. Supply fitted with starting switch. For Testing Aggregates for Resistance to Abrasion: Specification :It consists of a disc rotating about a shaft connected to a reduction gear box coupled to a motor. The disc rotates at 28-30 RPM. Under the rotating disc is a tray with an outlet to facilitate the removal of sand. Two Co is made for start and stop the flow of sand. Two containers with weights are supplied to keenical Hoppers are mounted on a bracket fixed to the circular tray. An arrangement the specimens pressed against the rotating disc. Suitable for operation on 220 V, 50 cycles.

Send Inquiry
Request To Call Back
Product Image (MTS-473)

Dial Thermometer with Rod in center

Price: 10 INR/Piece

Dial Thermometer with Rod in center: DIAMETER 50 to 550 F THERMOMETER New GRAINGER model 1NGF3 bimetal analog dial thermometer. Features include stainless steel case and stem, glass lens, hermetically sealed case and external temperature calibration adjustment. SPECIFICATIONS Range (F) 50 to 550F Range (C) 10 to 290C Graduations (F) 5 F Graduations (C) 2 C Face Diameter 5" Mount Back Stem Length 9" Fitting 1/2" NPT Shpg. 2 lbs.

Send Inquiry
Request To Call Back
Product Image (MTS-471)

Ductility Mould

Price: 10 INR/Piece

Ductility Mould: Introduction A set of three moulds as per IRC - SP-53-2002 Made of brass /Gunmetal with the shape, dimensions and tolerances as shown in fig 1. The ends b & b are known as clips, and the parts a & a are known as sides of the mould. The dimensions of the mould shall be such that when properly assembled it will form a briquette specimen having the following dimensions. Total Length : 75 ± 0.5 mm A = 36.5 ± 0.1 mm B = 30.0 ± 0.1 mm C = 17.0 ± 0.1 mm D = 10.0 ± 0.1 mm E = 10.0 ± 0.1 mm

Send Inquiry
Request To Call Back
Product Image (MTS-470)

Ductility Testing Machine

Price: 10 INR/Piece

Ductility Testing Machine Ductility is defined as distance in cms to which a standard briquette of bitumen can be stretched before the thread breaks. The briquette is stretched at a rate of 50 mm /min. +/2.5 mm per minute at a temperature of 27C +/0.5C. The apparatus consists of water bath with a thermostatic heater and a circulating pump to maintain uniform water temperature One half of the briquette moulds is fixed on a fixed plate in the water bath, the other half of the briquette mould is fixed to a carrier which slides over a rotating the threaded shaft with a clutch. The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath. A pointer fixed to the carrier moves over a scale graduated from 0-110 cm x 1 mm fixed on the bath with 0š (Zero) of the scale towards the fixed plates side. The rotating shaft has 2 speeds of travel for the bracket, 5 cm/min and 1 cm/min. selected by a clutch. Water bath inside is aluminium S. steel, its is an insulated water bath Water bath is provided with a drain. A heater with thermostatic control is fixed inside the water bath. Control switches for motor pump heater and indicator lamps are fixed at a convenient place on the water bath. Complete with three briquette moulds and one base plate, steel all made of brass operates on 230V A.C. supply single phase.

Send Inquiry
Request To Call Back
Product Image (MTS-464)

Dial Gauge for above

Price: 10 INR/Piece

Product Description: Features: Brand new and high quality. Used to measure shaft run out, shaft thrust, gear backlash. Simple structure, convenient use and maintenance. High sensitivity, stable and reliable in accuracy.

Send Inquiry
Request To Call Back
Product Image (MTS-463)

Proving Ring for above

Price: 10 INR/Piece

Proving Ring for above Detailed Description Detailed introduction to Proving Ring with Dial Indicator: Proving RingPrecision measuring device, high grade steel with plated finishing 3/4" tapped hole at both end. Supplied complete with dial and calibration chart. High Senstitvity Proving Rings , integral, made of special steel, carefully forged to give maximum strength &machined proving ring High Sentitivity Proving Rings , integral, made of special steel, carefully forged to give maximum strength &machined to give the highest sensitivities commensurate with high stability and to ensure long life and accuracy,

Send Inquiry
Request To Call Back
Product Image (MTS-461(a))

Director Shear Test Apparatus

Price: 10 INR/Piece

Director shear test apparatus hand operated without gauge Specifications : The apparatus comprises of the following:Loading Unit:Supplied with load yoke with direct and lever system for applying load. Normal stress capacity 8 kg/sq.cm. Load is applied either directly or through a counter balanced detachable lever. Provision is made for the load to be applied either through a steel ball recessed in the loading pad or direct through a boss on the pre calibrated loading yoke, the loading unit is provided with V strips and roller strips for frictionless movement of shear box housing.Shear Box Assembly :Comprising Direct Shear box in two halves for a square specimen size 60 x 60 x 25 mm one pair of plain gripper plates, one pair of perforated gripper plates, one pair of porous stones, one top loading pad. Shear box housing: Accommodates the Direct Shear Box assembly. Complete with two ball roller strips.Specimen Cutter: For cutting 60 x 60 x 25 mm specimen from larger samples.Set of weights to give a normal stress of 3 kg/sq.cm. through lever as follows:To give Kg/sq.cm. Qty. 0.05 4 Nos. 0.1 1 Nos. 0.2 1 Nos. 0.5 3 Nos. 1.0 1 Nos.Complete set as above but without proving ring. Salient Features Essential Accessories : High sensitivity compression proving ring cap 200 kg One Consolidation dia gauge 0.01 mm x 25 mm and one strain dial gauage 0.01 mm x 25 mm and one strain dial gaine 0.01mm x 25 mm. Optional Extras : Additional set of weights to give a normal stress of 5 kg/cm2. Soil Sampler for 60 mm x 60 mm specimen and test form pad of 50. Spares: Porous stone for 60 mm x 60 mm size sample available in pairs.

Send Inquiry
Request To Call Back
Product Image (MTS-456)

Curing Tank

Price: 10 INR/Piece

CURING Tank (Accelerated) for 15 cm cube moulds 6 nos, fitted with DIGITAL TEMP. Controll;er cum Indicator As per IS 9013 1978. It is developed to get the compressive strength of 28 days within short period by curing the concrete specimen by any of two methods namely warm-water method and boiling water method. Double Walled. Outer Made of M.S. Inside made of S.S. With hinged Cover Lid. Long Heaters placed at the bottom. Can accommodate 6 / 12 / 24 / 36 moulds of 15 cm or 12 / 24 / 36 / 72 moulds of 7.06cm with concrete or mortar. Fitted with Microprocessor Based Dual Display Digital Temperature Indicator cum Controller. Temperature Range from 50 C to 100 C. Provided with water circulation arrangement to keep the temperature uniform. Overflow Nozzle is provided. Drain Cock for emptying tank is also fitted at the bottom. Operation on 230 Volts, Single Phase. Curing Tank Accelerated for 06/12 cube moulds of 150/70.6 mm: For curing 06 Nos. of 150 mm Cube Moulds or 12 Nos. of 70.6 mm Cube Moulds. Suitable to operate on 230 V, 50 Hz, 32 Amp, Single Phase. Curing Tank Accelerated for 12/24 cube moulds of 150/70.6 mm: For curing 12 Nos. of 150 mm Cube Moulds or 24 Nos. of 70.6 mm Cube Moulds. Suitable to operate on 440 V, 50 Hz, Three Phase. Curing Tank Accelerated for 24/48 cube moulds of 150/70.6 mm: For curing 24 Nos. of 150 mm Cube Moulds or 48 Nos. of 70.6 mm Cube Moulds. Suitable to operate on 440 V, 50 Hz, Three Phase. Curing Tank Accelerated for 36/72 cube moulds of 150/70.6 mm: For curing 36 Nos. of 150 mm Cube Moulds or 72 Nos. of 70.6 mm Cube Moulds. Suitable to operate on 440 V, 50 Hz, Three Phase.

Send Inquiry
Request To Call Back
Product Image (MTS-455)

Hydraulic Compression Testing Machine

Price: 10 INR/Piece

Compression Testing Machine We are Leading manufacturer and Exporter of Hydraulic Compression Testing Machine for engineering Testing. Electronic Unconfined Compression Tester: This is similar with the added advantage of a motorised drive permitting a choice of three constant rates of stain. SPECIFICATION : Comprises a screw operated load frame, cap.5000kg with a gear box and motor drive giving 1.25, 1.5, 2.5mm/min. Rates of strain, a pair of cone seating, adaptor for proving ring, and stain dial gauge bracket. Supplied with one pair of male/female coning tools for 38mm dia samples but without ring and dial gauge. Suitable for operation on 230 V, Single Phase A.C. Supply. ACCESSORIES :Coning tools in pairs (Male & Female) for samples having diameter 38mm, 50mm, 75mm & 100mm

Send Inquiry
Request To Call Back
Product Image (MTS-454)

Compression Testing Machine

Price: 10 INR/Piece

Compression Testing Machine:digital load indicator 2000KN (200 Tons)/ 3000 KN (300 Tons) Capacity (Two Pillar Model) Electrically .Operated fitted with Digital Load Indicator with accuracy of 1KN. The digital load indicator incorporates peak hold facility and relay contact to protect the machine from overloading. The Machine is suitable for operation on 440V, 3-phase, AC supply. The machine is calibrated against a NPL/NCCBM certified.

Send Inquiry
Request To Call Back
Product Image (MTS-449(b))

Capping Set Vertical .

Price: 10 INR/Piece

Capping set vertical 150mm Banking on the skills of our professionals, we are offering a quality assured assortment of Capping Set (Horizontal & Vertical ). The Capping Set (Horizontal & Vertical) we offer is available in horizontal shapes that can be customized as per the requirements of the clients.

Send Inquiry
Request To Call Back
Product Image (MTS-439)

Cement Permeability

Price: 10 INR/Piece

Cement Permeability (Pozzolona Cement Mortar), as per IS: 1727 / 2645, without air compressor a) Single Cell Model b) Three Cell Model c) Six Cell Model Compressor for above, if required, pressure upto 100 PSI Straight Edge, 3 meters long, made of M.S., complete with Wedge Camber Board, 3 meters long

Send Inquiry
Request To Call Back
Product Image (MTS-915)

Solid Liquid Extraction Unit

Price: 10 INR/Piece

Solid-Liquid Extraction Unit 1.Contaminants may be present sorbed in the solid particles of the soil. Solid-liquid extraction allows these contaminants to be removed from the soil. Depending on the contaminant and the type of soil, a suitable solvent needs to be selected for this process. 2.One field of application for example, is the separation of organic contaminants that are present sorbed in fine solid particles. Solid-liquid extraction may take place after these fine particles have been separated by a hydrocyclone in the ex-situ treatment of contaminated soil. 3.The fundamental principle of solid-liquid extraction can be learned with The temperature of the solvent can be adjusted. Thus, it is possible to investigate the effect of this parameter on the separation process. The principle of counter current in solid-liquid extraction: 1 Extract outlet, 2 Extraction residue, 3 Extractant inflow, 4 Extraction material inflow, A. Path of the extract, B. Path of the extraction material

Send Inquiry
Request To Call Back
Product Image (MTS-436)

Load Frame

Price: 10 INR/Piece

Load Frame CBR App, motorised bench type load frame. California Bearing Ratio Apparatus (Motorised). Similar to above but supplied with bench mounting type 5000kgf. capacity load frame motorized, in place of load frame hand operated. The lead screw of the load frame has a single constant rate of travel of 1.25mm/min. Salient Features: Accessories for Laboratory C.B.R. Apparatus :High sensitivity Proving Ring 3000kg. capacity with calibration chart and carrying case. Dial Gauges 2 Nos.0.01mm x 25mm.Annular metal weight 5 kg. 147mm dia with 53 mm dia. central hole. Slotted metal weight, 5 kg. 147mm dia with 53 mm dia slot. Note: Proving Ring of other capacities are also available M.S. Mould, rammer 2.6 & 4.89 kg, 2.5 kg annular & slotted weights, complete but without Proving Ring & Dial Gauge. Proving Ring for above, 10 kN (With our calibration). Dial Gauge for above, 0.01 x 25 mm.

Send Inquiry
Request To Call Back
Product Image (MTS-435(a))

CBR Test Apparatus

Price: 10 INR/Piece

C B R Test Apparatus To know California Bearing Ratio Apparatus Motorized Values in laboratory, it is useful in determining the load carrying capacity in the laboratory when in-place density and water contents are such that the degree of saturation is 80 % or greater, when material is conhensionless and coarse grained, such that it is not effected by changes in water contents and when the material has been in-place for considerable time. The loading is effected by means of a mechanical load frames which can be fixed to the under side of a truck. Salient Features Similar to above but supplied with bench mounting type 5000kgf. capacity load frame motorized, in place of load frame hand operated. The lead screw of the load frame has a single constant rate of travel of 1.25mm/min. Accessories for Laboratory C.B.R. Apparatus High sensitivity Proving Ring 3000kg. capacity with calibration chart and carrying case. Dial Gauges 2 Nos.0.01mm x 25mm. Annular metal weight 5 kg. 147mm dia with 53 mm dia. central hole. Slotted metal weight, 5 kg. 147mm dia with 53 mm dia slot.

Send Inquiry
Request To Call Back
Product Image (MTS-427)

Universal Automatic Compaction Apparatus

Price: 10 INR/Piece

Compaction App., Universal Automatic, as per IS:2720 Available in two technically advanced models, our Universal Automatic Compactor is designed and developed as per IS:2720 (PART VII & VIII). Readily used for soil compaction, it is fabricated using advanced machines and finest material to ensure delivery of superior quality range. Durability, accuracy in output, reliability, robust construction, high performance, low maintenance and longer functional life are some of the characteristics of our range.

Send Inquiry
Request To Call Back
Product Image (MTS-426)

Compaction Test

Price: 10 INR/Piece

(A) Compaction Test IS : 2720 Part-vii (Small size) made of gun metal (B) Compaction Test IS : 2720 Part-vii (Small size) made of steel mould (C) Compaction Test IS : 2720 Part-vii (Large size) made of gun metal (D) Compaction Reamer 2.6kg x 310mm controlled fall (E) Compaction Reamer 4.890kg x 400mm controlled fall

Send Inquiry
Request To Call Back
Product Image (MTS-424(b))

Static Cone Penetrometer(b)

Price: 10 INR/Piece

Static Cone Penetrometer Static Cone Penetrometer Capacity for reaching greater depths and to facilitate easy and constant rate of penetration 1 to 2.5cm/sec of the cone this engine-driven Static Cone Penetrometer of 100 KN (10,000 Kgf) capacity is preferable. The equipment consists of a hydraulic pump driven by a Diesel Engine. The whole system is mounted on a tow able trolley fitted with pneumatic wheels. The pumping unit and ram are connected by means of flexible pipes through a direction control valve. The hydraulic ram moves on a two pillar stand mounted on a trolley 1.Penetration Cone, steel 60 cone angle, 10cm2 base area, with friction jacket One 2. Mantle Tube, 36mm uniform OD with sounding Rod working length 1 m Thirty 3. Load Measuring Head, with Automatic cut-off valve, and oil can without pressure gauges. 4. Pressure Gauge, 0-600 x 5 kg/cm One 5. Pressure Gauge, 0 100 x 1kg/cm One 6. Trusses Two 7. Screw Anchor 45 cm Six 8. Screw Anchor 30 cm Six 9. Screw Anchor 20 cm Six 10. Screw Anchor Rod with cone Six 11. Driving handle for Screw Anchor One 12. Extension Pipe for Handle Four 13. Clamping Screw with Nuts Six 14. Extractor Tube with Connector One 15. Tool Box One 16. Tarpaulin Cover One

Send Inquiry
Request To Call Back
Product Image (MTS-411)

Bitumen Pentrometer

Price: 10 INR/Piece

Bitumen pentrometer medium Penetrometers are used for testing wide variety of materials such as grease, petroleum, bitumen, tar, asphalt, wax polish, food stuffs , rubber, cement , pharmaceutical creams and soils.

Send Inquiry
Request To Call Back
Product Image (MTS-416A)

Bitumen Pentrometer Ordinary

Price: 10 INR/Piece

Bitumen pentrometer ordinary We bring forth an impeccable assortment of Cone Penetrometer to our prominent patrons. Offered penetrometer is fabricated by making use of all the available resources at our manufacturing setup that is manned with the experts of this domain. Regarded for superior functioning, this range is quality tested for.

Send Inquiry
Request To Call Back
Product Image (MTS-411)

Briquette Mould

Price: 10 INR/Piece

Briquette Mould For casting of cement briquettes for tensile strength tests. It is a two part split mould made of gun metal. Two thumb screws facilitate easy and quick assembling and dismantling of the mould. The minimum cross section of the briquettes cast is 25.4 mm x 25.4 mm. Supplied complete with a steel base plate. Briquette Mould , as per IS:269/4031 ( Single Gang ) Briquette Mould , as per IS:269/4031 ( Three Gang )

Send Inquiry
Request To Call Back
Product Image (MTS-402)

Aggregate Impact Tester .

Price: 10 INR/Piece

Aggregate Impact Tester : MTS-402 Aggregate Impact : with counter is 2386 Part iv-1963 Uger out fit blade type (Post hole type) (i) Size 150mm (ii) Size 100mm (iii) Size 75mm (iv) Size 50mm (v) Ball Mill size 300x300 IS : 2386 (vi) Ball Mill size 450x450 IS : 2386

Send Inquiry
Request To Call Back
Product Image (MTS-401)

Aggregate Impact Tester

Price: 10 INR/Piece

Aggregate Impact Tester Determining the aggregate impact value of coarse aggregate. Consists of a base weighing between 22-30 kg with a lower surface of not less than 30 cms and support columns to form a rigid frame work around quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380+-5.0 mm. The hammer is provided with a locking arrangement.

Send Inquiry
Request To Call Back
Product Image (MT-13495)

Shoe Cover Dispenser

Price: 10 INR/Piece

Shoe Cover Dispenser We have uniquely positioned ourselves as a dependable firm, engaged in manufacturing and supplying a commendable array of Shoe Cover Dispenser. This Shoe Cover Dispenser is designed and manufactured using exceptional quality raw material and latest technology by our deft professionals. In order to ensure quality, it is strictly tested on various parameters by our experts. Apart from this, significant quality and sturdy structure increase the demand of our offered range in the industry. Features of Shoe Cover Dispenser Sturdy Metal Case Corrosion resistant body Easy installation Flawless finish Plastic Bag Size app. 27-46cm Can Accommodate up to 2 Kg. Plastic Rolls.

Send Inquiry
Request To Call Back
Product Image (EM-265)

Digital Automatic Polarimeter

Price: 10 INR/Piece

Digital Automatic Polarimeter EM-265 Measurement Range : -45 - +45, -120Z + 120Z Minimum Reading : 0.001Z and 0.01Z Accuracy : +(0.01Z +Measurement value 0.05 %)+(0.03 Z+ Measurement value 0.05 %) Repeatability (Sta. Deviation) : < 0.00 Mini. sample transmittance : 1 % Salient Features: Highly Stable & Accurate. Domestic Advanced digital circuit and microcomputer control. LCD Display. Storage of three times results for Re-M (Repetition measurement) and calculation of average value. RS 232 interface.

Send Inquiry
Request To Call Back
Product Image (EM-97)

Digital Salinity Meter

Price: 10 INR/Piece

Digital Salinity Meter DIGITAL SALINITY METER Display 3 digit LED. Rang 3 ranges 0 to 2, 20 & 50 ppt . Accuracy ±2 FS ± 1 digit. Resolution 0.001 ppt. Temperature Co. 0-50 C Manual. Cell Constant Adjustable on display. Cell Platinum DIP. Power 230 V ± 10 % , 50 Hz.

Send Inquiry
Request To Call Back
Product Image (JKA-175)

Animal Holders

Price: 10 INR/Piece

ANIMAL HOLDERS : JKA-175, JKA-178, JKA-179 Animal Holders (Dogs & Cat) Stainless steel bar 50mm size with universal joint JKA-178 : Animal Holders (Small Animals) Stainless steel bar 50mm size with universal joint JKA-179 : Animal Head Holders (Universal) Stainless steel bar 50mm size with universal joint

Send Inquiry
Request To Call Back
Product Image (JKA-122)

Boss Heads Stands And Fixing Devices

Price: 10 INR/Piece

BOSS HEADS, STANDS AND FIXING DEVICES : JKA-122 All stands have perfectly machined and stable bases and machined perfectly vertical uprights with standard 9 mm diameter. Boss Heads (x-blocks) are perfectly machined out of solid Brass rods. JKA-121 : Complete with 38 cm high upright JKA-122 : Complete with 38 cm high upright with quick tangential adjustment & clamp nut

Send Inquiry
Request To Call Back
Product Image (01)

Psychology Equipments

Price: 10 INR/Piece

Psychology Equipments Various Psychology Equipments Mirror Drawing Apparatus Human Maze Finger Maze Memory Drum Colour Mixer Steadiness Tester Metronome Anthropometer Sliding Calliper Craniophore Goniometer Techistoscope Chronoscope Bicycle Ergograph Grip Dynamometer Mosses Ergograph Perimeter Galton Bar Audiometer Tread Mill Visual Activity Apparatus

Send Inquiry
Request To Call Back
Product Image (MT-P15)

Flash Point And Fire Point Apparatus

Price: 10 INR/Piece

Flash Point And Fire Point Apparatus ELECTRIC FLASH AND FIRE POINT APPARATUS Electric Flash Fire Point Tester ( Cleveland Open-Cup ) Application: Its used to determine flash and fire point of bitumen Specifications: Power voltage: 220V±10% Can adjust the rise temperature speed Feature: Total stainless steel worktable, with flame lighter

Send Inquiry
Request To Call Back
Product Image (MT-80013)

Power Supply

Price: 10 INR/Piece

Specification of Power Supply : Dual DC power supply 0 to 30V, 2A with automatic overload protection and digital display for voltage and current. Features low ripple voltage Current limit 0.1 A to 2 A. Resolution: 0.1 V for voltage, 0.01 A for current. Multiple outputs DC power supply: output 1: 0 to 30 V, 1 A, output 2: 5.V, 1.A, output 3: 0 to (+/-)15.V, 1.A. Features low ripple voltage Current limit 0.02 A to 1 A. Resolution: 0.1 V for voltage, 0.01 A for current.

Send Inquiry
Request To Call Back
Product Image (EM-40)

Electrophoresis Apparatus

Price: 50 INR/Piece

ELECTROPHORESIS APPARATUS : EM-40 It is required in Biotechnology, Molecular Biology applications in colleges, Universities, Research Institutes. It is meant for protein characterization. The unit is joint less, moulded of transparent Poly carbonate to avoid leakage. Complete with Acrylic cover. Supply Complete with standard accessories : Comb 9 walls š“ 10 Teeths (Set of 2 Pcs.). Comb 11 walls š“ 12 Teeths (Set of 2 Pcs.). Comb 13 walls š“ 14 Teeths (Set of 5 Pcs.). Casting Tray, Size 7x7cm (Set of 2 Pcs.). Electrode Set (Set of 2 Pcs.).

Send Inquiry
Request To Call Back
Product Image (P-S2)

Sigma Blade Mixer

Price: 5 INR/Piece

Sigma Blade Mixer Specification: Used for mixing of highly viscous mass, sticky and dough like products, Mixing of pastes, rubber, and heavy plastic masses, appl Application & Process: The Sigma Mixer is used for mixing and kneading for mixing, kneading of highly viscous mass, sticky and dough like products, Mixing of pastes, rubber, and heavy plastic masses, applications in Food, Rubber, Pharmaceutical, Chemical and agro industries, Dry powder to wet phase mixing. This mixer is most suitable for highly viscous material and dough like masses. Total Capacity Working Capacity Liters Liters 8 3- 5 75 35-50 150 70-100 225 110-150 300 150-200 450 225-300 600 300-400 800 400-500 1100 500-750 1400 700-1000

Send Inquiry
Request To Call Back
Product Image (P-T7)

Tablet Counter

Price: 10 INR/Piece

Tablet Counter tablet Counting Device (Cat No. - P-T7): Device for quick, convenient and correct counting of tablets. It is made of anodized aluminium sheet with pouring lip and handle. Suitable for 100 tablets.

Send Inquiry
Request To Call Back
Product Image (P-P2)

Propeller Type Mechanical Agitator

Price: 10 INR/Piece

Propeller Type Mechanical Agitator Microteknik are manufacturer and Exporter of Pharmacy lab Equipment. Specification of Propeller Type Mechanical Agitator Stainless steel rod with propeller type blade. Fitted with 1/20 HP motor with 4000 RPM with a speed regulator. Unit fitted on heavy cast-iron base. It can be raised and lowered in height. Complete with plug-cord etc. It works on 220V AC 50Hz single phase.

Send Inquiry
Request To Call Back
Product Image (P-J2)

Jar Test Apparatus

Price: 10 INR/Piece

Jar Test Apparatus Jar Test Apparatus:It has been specially designed for use in water treatment plants to correctly estimate the dosing of alum and such other coagulants for treatment of water. It consist of electronically controlled variable speed electronic motor with timing belt driven mechanism. Speed controller is provided to control the speed of four/six stirrers from 5 to 150 RPM. Stainless Steel/ Brass paddles are provided.

Send Inquiry
Request To Call Back
Product Image (P-F5)

Filtration Assembly

Price: 10 INR/Piece

Filtration Assembly( Filter Press) All contact parts made of stainless steel and comprises of following components : Pressure vessel stainless steel cap. 20 lit. & 6 or 8 disc plates Motor compressor. Deep and shallow stainless steel filter plates Filter media . Stainless steel pump and pipes. Filter cartridge assembly Stainless steel top cover Perforated screens Interlocking cups Stainless steel trolley

Send Inquiry
Request To Call Back
Product Image (P-B5)

Blender .

Price: 10 INR/Piece

Blender :(P-B5) Electrically operated with speed control device with three stainless steel jars of different sizes. Jars : 3 Stainless Steel Jars. Motor power (w) : 550 W. Revolution : 18000 RPM. Power requirement : 230 V,50 Hz.

Send Inquiry
Request To Call Back
Product Image (P-A7)

Anderson Pipette

Price: 10 INR/Piece

Anderson Pipette (Cat No : P-A7) Anderson Pipette : Particle size determination apparatus, (sedimentation pipette, andrerson) consisting of 500ml. Graduated cylinder, graduation from 0 to 20cm and fitted with 10rni.Pipette with three way stopcock, the tip of pipette at the level of 0 mark at the cylinder.

Send Inquiry
Request To Call Back
Product Image (P-A6)

Antibiotic Zone Reader

Price: 10 INR/Piece

Antibiotic Zone Reader Antibiotic Zone Reader : The Antibiotic zone reader provides a rapid accurate method for determining the strength of antibiotic materials by measuring the diameter of an inhibited zone in petri dish. This zone reader measures the diameter of the inhibited zone to 0.02mm with the range of 0 to 35mm. It works on 220V AC 50Hz.

Send Inquiry
Request To Call Back
Product Image (P-D1B)

Microprocesser Disintegration Test Apparatus

Price: 10 INR/Piece

Microprocesser Disintegration Test Apparatus : (P-D1B) Features: Complies with USP, IP specifications Extremely useful for pharmaceutical labs Highly Accurate and Easy to Operate Baskets & DOWN movement as per IP/USP Specifications : 20 x 4 Line Alphanumeric LCD with Backlit 15 Soft Touch Membrane Type Keys 20 Setups Storage Facility 200 Samples Storage Facility Printer Attachment Facility Audio Visual Indicators for System Status.

Send Inquiry
Request To Call Back
Product Image (J-9A)

Automatic Razor Sharpener Arthur Thomas Type

Price: 10 INR/Piece

Automatic Razor Sharpener (Arthur Thomas Type) Razor Sharpener Is Arthur Thomas Type Heavy Duty Sharpening Machine For Razors Upto 300 Mm Length. It Is Equipped With Large Round Hard Surface Plate With One Side Ground And Other Side Polished For Various Sharpening Operations. Completed With Universal Knife Holder Having Automatic Reversing Device And Dust Cover Without Abrasives. Optional: Micro Abrasives For Coarse & Fine Honing Are Available In 200 Gm Packing At Extra Cost Suitable For All Models Of Sharpener

Send Inquiry
Request To Call Back
Product Image (MT-MA)

Microtome Accessories

Microtome Accessories Microtome Accessories : (At extra cost) 1 Microtome Razor : Fabricated out of grain tool steel heat treated and tested for micro structures, both side wedges with back & handle in wooden box Size : 120 mm, 140 mm, 160 mm 1 Leather Strap : Special quality leather size 12 x 2" fitted on wooden base for final strapping of razors 1 Honing Stone : Special quality stone in a box 1 Honing Plate : Glass mounted on wooden base 1 L-Moulds : It is used for making different size wax blocks (in pairs) i.e. 37 x 25x 15 mm, 50 x 25 x 15 mm 75 x 30 x 15 mm 1 Tissue Cassette: Made of reinforced stainless steel mesh

Send Inquiry
Request To Call Back
Product Image (JP-1)

Slide Warming Table

Slide Warming Table Slide Warming Table is useful for slow but uniform heating of slides to flatten sections below melting point of wax. S.S. top plate mounted on metallic stand with a thermostat to control temperature up to 70š C. Supplied completely with Pilot Lamp, Temperature Control Knob, Cord-Plug etc. to work on 220 V AC 50 Hz single phase.

Send Inquiry
Request To Call Back
Product Image (MT- LTFA)

Laminar Turbulent Flow Apparatus

Price: 10 INR/Piece

Laminar Turbulent Flow Apparatus Our company is the major in offering Laminar Turbulent Flow Apparatus to the clients. This product is widely used to measures. Laminar Turbulent Flow Apparatus is offered in different specifications as per clients requirements. Offered range is highly acknowledged among clients due to its impeccable finish, excellent robustness and optimum performance. Features: Low maintenance Less space consumed High efficiency RANGE OF EXPERIMENTS: 1. Laminar /Turbulant flow study with respect Reynold number 2. Head loss comparison in Laminar /Turbulent flow 3. Velocity profile in Laminar /Turbulent flow using pitot tube

Send Inquiry
Request To Call Back
Product Image (MT-HB)

Hydraulic Bench

Price: 10 INR/Piece

Hydraulic Bench : The Basic Hydraulic Bench is of volumetric type and has been designed to provide continuous and controlled supply of water to conduct various experiments using auxiliary modules in typical Fluid Mechanics and Hydraulics Laboratory. The unit is an ideal service unit for conducting student projects. Once filled, no external water supply is required. Water is recycled between the Experiment Module, Measuring Tank and the Storage Tank by the Centrifugal Pump.

Send Inquiry
Request To Call Back
Product Image (J-11A)

Wood Microtome

Wood Microtome Wood Microtome (Jung Type) is a heavy duty microtome for sectioning hard materials like wood, bone etc. upto 8 x 5 cm size in steps of 1 micron each up to 30 microns. Technical features:- Feed adjustment - 30 microns Vertical object displacement - 30 mm Opening of object vice - 80 x 50 mm Length of slide ways - 42 cm Overall dimensions (horizontal) 85 x 40 cm Accessories supplied with equipment:- Special heavy duty razor with back-one. Object holders-set of three. Vices-two. Spanner for tightening razor-one. l-keys-two. Screw driver-one. Oilcan-one.

Send Inquiry
Request To Call Back
Product Image (MTS-19012)

Decade Resistence Box

Price: 10 INR/Piece

Decade Resistence Box Micro Teknik is manufacture,exporters & suppliers Sub Division Total Single Dial " " " " 0.1 1 10 100 1000 1 10 100 1000 10000 Two Dials " " " 0.1 &1 1 & 10 10 & 100 100 & 1000 11 110 1100 11 K Three Dials " " 0.1, 1 & 10 1, 10 & 100 10, 100 & 1000 111 1110 11.1 K Four Dials " 0.1, 1, 10 & 100 1, 10, 100 & 1 K 1111 11.11 K Five Dials 0.1, 1, 10, 100 & 1000 11.111 K Six Dials 0.1, 1, 10, 100, 1 K & 10 K 111.111 K Switches Used : Brass with silver Plating Resistance used : Wire wound, wound non-inductively on Bakelite spools, heat treated & processed for ageing, varnish coated. All resistances are of 1 watt. Wire Used : Constantan Accuracy 0.1%, Manganin 0.05%.

Send Inquiry
Request To Call Back
Product Image (MTS-19006)

To Measure Dielectric Constant Of Solid and Liquid

Price: 10 INR/Piece

To Measure Dielectric Constant Of Solid & Liquid Micro Teknik is manufacture, exporters & suppliers Experiments: 1. To measure dielectric constant of liquid. 2. To measure dielectric constant of solids. 3. To measure phase shift. 4. To measure Q of a cavity. Components Name Qty. Klystron Power Supply 1 Klystron Mount 1 Klystron Tube 1 Isolator 1 Frequency Meter 1 Variable Attenuator 1 Slotted Section 1 Tunable probe 1 Detector Mount 1 Solid dielectric cell 1 Liquid Dielectric cell 1 VSWR meter solid state 1 Stand 4 Wave guide cavity 1 BNC Cable 1 Cooling Fan 1 Movable Short precision 1 Phase Shifetr 1 Set of Dielectric 1

Send Inquiry
Request To Call Back
Product Image (MTS-19005)

To Measure The Polar Pattern Of The Antenna

Price: 10 INR/Piece

To Measure The Polar Pattern Of The Antenna: Micro Teknk is manufacture, exporters & suppliers Experiments: To measure the polar pattern & gain of the antennas (Pyramidal horn. Pick up horn, slotted horn, Dielectric horn, sectorial horn & parabolic disc).

Send Inquiry
Request To Call Back
Product Image (MTS-19004)

Study Of Microwave Component

Price: 10 INR/Piece

Study Of Microwave Component Micro Teknik is manufacture, exporters & suppliers Experiments: To study Magic Tee, Directional Coupler, Isolators & Circulators. To measure characteristics of detector diode. To study attenuation measurements. To study the return loss measurements.

Send Inquiry
Request To Call Back
Product Image (MTS -496)

Fatigue testing machine

Price: 10 INR/Piece

Fatigue testing machine 100kg cm. Fatigue testing machine 200kg cm. Fatigue testing machine 300kg cm. Fatigue Testing Machines is one of the major reasons for failure of the materials used in all engineering designs. It is important to know fatigue properties of most of the materials before using them for actual application. Microteknik make Fatigue Testing Machines of AI-FT series is most suitable for measuring fatigue strength and to draw S-N diagram. These are used by research institute, Auto industries and materials manufacturers. This is a rotating beam type machine where load is applied in reverse bending manner. Standard 8mm diameter specimen is held in special holders at its ends and loaded such that it experiences a uniform bending moment. Specimen is rotated at 4200 RPM by a motor. Features : Light weight, compact size, simple design Table model. No need of foundation Simple lever systems for changing load Accurately calibrated as per IS 5075 Machines can be supplied with Nm calibration on request

Send Inquiry
Request To Call Back
Product Image (MTS-460)

Cement Spatula

Price: 10 INR/Piece

Cement Spatula: Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. This edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers. Material :Polypropylene Code No. Particulars Packing ETPW-0260 150ml 12Pcs. ETPW-0261 200ml 12Pcs.

Send Inquiry
Request To Call Back
Product Image (MT-101711)

Flow Measurement Apparatus

Price: 5 INR/Piece

low Measurement Apparatus FEATURES Comparative flow coefficient of venturi meter, orifice meter and rotameter. Comparative head loss of venturi meter, orifice meter, sudden enlargement, sudden contraction,90 degree elbow and rotameter. Suitable for classroom demonstrations. Can be used on Hydraulics Bench or Head Tank RANGE OF EXPERIMENT Direct measurement of differential pressure for venturi meter and orifice meter. Direct measurement of head loss for sudden enlargement, sudden contraction, 90 degree elbow and rotameter. Calculation of flow coefficient for venturi meter and orifice meter.

Send Inquiry
Request To Call Back
Product Image (EM-62)

Digital Nephelometer

Price: 10 INR/Piece

DIGITAL NEPHELOMETER Specification of Digital Nephelometer Display 3 Digital LED Detector Photocell Photodiode Range 0-20 AND 0-200 NTU Resolution 0.01 NTU Accuracy 2% FS ± 1 digit Sample Systems 30 mm Clear Glass Test Light Source 6V Tungsten Lamp Power 230V ±10%, 50Hz AC

Send Inquiry
Request To Call Back
Product Image (EM-36F)

Field Digital Ph Meter

Price: 10 INR/Piece

Field Digital Ph Meter (Cat No. - EM-36F) FIELD DIGITAL pH METER Specification: Display 3 LED Range PH 0-14 PH Range mV 0±1999mV Resolution PH 0.01PH Resolution mV 1mv Accuracy PH ±0.01 PH Accuracy mV ±1 mV Temperature Manual 0 To 100 deg.

Send Inquiry
Request To Call Back
Product Image (EM-36D)

Deluxe Ph Meter

Price: 10 INR/Piece

Deluxe Ph Meter (Cat No. - EM-36D) TEKNIK DELUXE pH METER Range PH 0 to 14 mV 0 to ± 1999 Display 3 digit LED Display Accuracy pH ±0.01pH ± 1 digit mV ± 1 mV ± 1 Digit Resolution 0.01 pH , 1 mV Temp Compensation Automatic And Manual 0 to 100 C Slope Correction 80% to 120% Ambient Temperature 0 C to 50 C Recorded Output 0 to 100 mV/pH Power 230V ± 10% 50 Hz AC Dimensions 275x175x85 mm Accessories a) pH Electric b) Electrode Stand c) Standard Solution 7.0 pH & 4.0 pH d) Electrode Probe e) Dust Cover f) Instruction Manual

Send Inquiry
Request To Call Back
Product Image (EM-21-M)

Precision Digital Melting Point Apparatus .

Price: 10 INR/Piece

Precision Digital Melting Point Apparatus (Cat No. - EM-21-M) PRECISION DIGITAL MELTING POINT APPARATUS Digital Automatic Melting Point Apparatus is designed for quick and accurate detection of melting point. Feature packed & easy to use, this is an indispensable bench top tool. This equipment has an arrangement to hold the capillary containing the sample in uniformly heating media. the temperature is indicated on a digital display readable in 1.0š C. At the point, when the sample melts, the heating is automatically cut-off and the digital display showing the temperature remains on the indicator till it is cleared. No Silicon oil or other bath is required as heating media. Range 2.0š C above room temperature to 350š C. Specifications Display Digital 3 Digit, Bright LED Accuracy 1% Operation Fully Automatic Dimensions L 405 x B 360 x H 235 mm (approx) Weight 5 Kg (approx.) Power 230V + 10?, 50Hz Accessories Capillary Tube - 100 No. Cleaning Tool - 1 No.

Send Inquiry
Request To Call Back
Product Image (JEQ-21)

Digital Automatic Melting Point Apparatus .

Price: 10 INR/Piece

Digital Automatic Melting Point Apparatus (Cat No. - JEQ-21) Digital Melting Point Apparatus is a compact instrument designed for accurate determinations of melting points of solid samples. Salient Features Cylindrical silicon oil bath. Built-in magnetic stirrer with electronic speed controller. Electronic controller for adjusting the heating rate. Digital display of temperature with PT-100 sensor. Glare-free back-ground light with adjustable light intensity. Provision for holding the melting point display.

Send Inquiry
Request To Call Back
Product Image (EM-22)

Digital Tele Thermometer

Price: 10 INR/Piece

DIGITAL TELE THERMOMETER Range 0 to 60 C. Resolution 0.1 C. Accuracy ± 0.2% F.S ± 1 Digit. Input RTD (PT-100) or IC Sensor. Channels 6 Channels Switch Selectable. Display 31/2 digit red LED display. Power 220V ± 10% AC 50 HZ. Dimension 275x175x75 mm. Weight 2 Kgs. Accessories a) 6 Pyrogen Probes. b) Dust Cover. C) Instruction Manual.

Send Inquiry
Request To Call Back
Product Image (EM-152M)

Microprocessor Hemoglobin Meter

Price: 10 INR/Piece

Microprocessor Hemoglobin Meter (Cat No. - EM-152M) MICROPROCESSOR HEMOGLOBIN METER Display- 16X2 Lines LED Display. Measuring Rang- 0-40 gm/di of HB. Zero Adjustment- Automatic . Dilution ratio- 1.251. Key Board- Soft touch 4 days. Calibration- Automatic. Wavelength- 530 nm. Detector- High sensitive silicon photo diode.

Send Inquiry
Request To Call Back
Product Image (EM-152)

Digital Hemoglobin Meter

Price: 10 INR/Piece

Digital Hemoglobin Meter (Cat No. - EM-152) DIGITAL HEMOGLOBIN METER Display 3 Digit, Bright LED. Display Mode O.D. And 3 Concentration, Modes Ci, C2, C3. Zero Adjustment Automatic (Without Knob rotation). Accuracy +0.02 O. D. In built memory to retain last K factor for concentration even after power loss.

Send Inquiry
Request To Call Back
Product Image (EM-FTIR)

Ftir Spectrometer

Price: 10 INR/Piece

Ftir Spectrometer (Cat No. - EM-FTIR) FTIR SPECTROMETER Spectral Range 7800 to 350 cm-1 Resolution Better than 0.85cm-1 Wave Number ±0.01cm-1 Scanning Speed 5-step adjustable for different applications Signal to noise ratio better than 15,000:1 (RMS value, at 2100cm-1, resolution: 4cm-1, detector: DTGS, 1 minute data collection) Beam splitter Ge coated KBr Infrared Source Air-cooled, high efficiency Reflex Detector DTGS Data system Compatible computer Software FT-IR software contains all routines needed for basic spectrometer operations, including library search, quantitation and spectrum export IR Library 11 IR libraries include.

Send Inquiry
Request To Call Back
Product Image (EM-142AS)

Atomic Absorption Spectrophotometer

Price: 10 INR/Piece

Atomic Absorption Spectrophotometer (Cat No. - EM-142AS) ATOMIC ABSORPTION SPECTROPHOTOMETER : Technical Specifications Optical System Single Beam, Grating 1200 lines/mm Wavelength Range 200-1000nm Band Width 1 nm Wavelength Accuracy ±0.5 nm Wavelength Repeatability +0.1nm Wavelength Setting Automatic Photometric Accuracy ±0.1 %T Photometric Repeatability +0.3 %T Photometric Display Range -0.3-3.0A,0-200%T, 0-9999C Stability +0.002A/h @ 500nm Stray Light 0.3%T @220nm, 360nm Data Out Port USB Printer Port Parallel Port Display 128*64 Dots LCD Lamp Deuterium Lamp & Tungsten Halogen Lamp Detector Silicon Photodiode Power Requirement AC220V/50HZ

Send Inquiry
Request To Call Back
Product Image (EM-142)

Digital Spectrophotometer

Price: 10 INR/Piece

DIGITAL SPECTRO PHOTOMETER Range-340 to 960 nm Resolution-0.1 %T, 0.001 Abs. Out put-% T : 0 to 100 % , Abs : 0 to 1.999, Conc.: 0 to 1999 Detector-Silicon Photodiode Light Source-6 V, 1 Amp, Tungsten Halogen Lamp Monochromator-600 Lines/cm grating Path Length-10 mm Spectral Bandwidth-10 mm Wavelength Resolution-5 nm Wavelength Accuracy-2.5 nm Repeatability-±2nm Display-3 digit LED display Operating Temp-5 to 45 C Power-230V ± 10% AC, 50 Hz Accessories Test Tubes-10 nos, Dust Cover, Operation Manual

Send Inquiry
Request To Call Back
Product Image (EM-111)

Digital Flame Photometer .

Price: 10 INR/Piece

Digital Flame Photometer (Cat No. - EM-111) DIGITAL FLAME PHOTO METER No. of Filter Na & K (Ca & Li optional). Range Na : 0-100 ppm Ca : 20-100 ppm, K : 0-100 ppm Li : 10-100 ppm. Sensitivity Na : 5 ppm Ca : 10 ppm, K : 5 ppm, Li : 10 ppm. Read out 2 digit bright LED Display. Accuracy ± 2% upto 40 ppm, ± 5% above 40 ppm. Repeatability 2 Count. Detector Silicon Photodiode. Filters Narrow band interference glass filters. Nebulizer Black bakelite, axial flow type. Flame System LPG and dry oil free air. Warmup time 10 minutes. Power 230V ± 10% AC 50 Hz. Compressor Unit Air Supply By oil free mini compressor unit with pressure regular. Combustion LPG controlled by precision regulator. Power 230V±10?50Hz. Accessories Instrument with Na & K Filters instruction Manual. Dust Cover. Chimney. Air and Gas Tubing Along with Clamp.

Send Inquiry
Request To Call Back
Product Image (EM-91)

Digital Colony Counter

Price: 10 INR/Piece

Digital Colony Counter Fitted with automatic 3 Digits LED Digital Display. Counting plate with illuminated standard wolfhugel ruling ensures clearly differentiated and sharply defined colonies. Each touch of making pencil in the petri dish increment the colony count by 1 and the glowing LED Display depicts the total colony count. Maximum colony Count possible upto 999. Provided with a manual reset of digital display, ON/OFF Switch, counting plate, 100 mm. dia lens, cord and plug. To work on 220V A.C.

Send Inquiry
Request To Call Back
Product Image (EM-85)

Digital Potentiometer

Price: 10 INR/Piece

Digital Potentiometer (Cat No. - EM-85) DIGITAL POTENTIOMETERS Range 0 to 2000mV. Resolution 0.1 mV. Slope Correction 80% to 120%. Repeatability + 1 mV. Accuracy ± 1 mV ± digit. Input Impedance 10 ohms. Operating Temperature 0 to 50 C. Display 3 Digit LED display.

Send Inquiry
Request To Call Back
Product Image (EM-81M)

Microprocessor Turbidity Meter

Price: 10 INR/Piece

MICROPROCESSOR TURBIDITY METER Display 16X2 Lines Alfa Numeric. Rang 2 ranges 0 to 200 & 200 to 1000 Jtu/ntu. Accuracy ±3% of Full Scale Deflection in 0-1000 Jtu/ntu. Sample System 30 mm Clear Glass Cuvettes. Light Source 6.8 Volt, 0.3 Amps Tungsten Lamp. In built memory to retain both range standard solution and last set value even after power loss.

Send Inquiry
Request To Call Back
Product Image (EM-71F)

Field Conductivity Meter

Price: 10 INR/Piece

FIELD CONDUCTIVITY METER Display:3 Digit LED. Range:2-20 Mohs/cm 2 Ranges. Temperature Co. Manual:0-50 C. Cell Constants Pre-Adjustable. Conductivity Cell Platinum DIP. Measuring Frequency 1000 Hz. Accuracy:+1% FSI. Power:9volt battery.

Send Inquiry
Request To Call Back
Product Image (EM-61F)

Field Turbidity Meter

Price: 10 INR/Piece

Field Turbidity Meter Range: 0.00 to 50.00 FTU; 50 to 1000 FTU. Resolution: 0.01 FTU (0.00 to 50.00 FTU); 1FTU (50 to 1000 FTU). Light source: Infrared LED. Light detector : Silicon photocell. Auto Off : After 5 minutes of non-use. Calibration: 3 points (0 FTU, 10 FTU and 500 FTU). Power supply : 4 x 1.5V AA batteries / approx 60 hours of continuous use or 900 measurements.

Send Inquiry
Request To Call Back
Product Image (EM-58)

Microprocessor Photo Calorimeter

Price: 10 INR/Piece

Microprocessor Photo Calorimeter (Cat No. - EM-58) Microprocessor Photo Calorimeter have following features :- Highly Accurate & Stable. Range 400 to 700 nm. 16 X 2 Line Alphanumeric LCD Display. Printer Attachment Facility. Storage For 100 Samples. Soft Touch Membrane Keys. Applications : For determination of concentration of constituents in :- Clinical, pharmaceutical, food. Beverage & water analysis. Analytical and agricultural chemistry. Metallurgy. Blood. Specifications:- Wave length range : 400 to 700 nm. Resolution ; 1%T, 0.01Abs., 0.01 Conc., 0.01 K Factor. %Transmission : 0 - 100% T. Absorbance : 0 - 1.99A. Concentration : 0 - 19999. K Factor : 1 -19999. Photo detector : Silicon Photodiode / Photo Cell. Display : 16x2 line alphanumeric LCD display with backlit. Keyboard: 8 Keys, soft touch membrane keys. Data storage : Up to 100 Samples. Light source : 6.8V, 0.3Amp. Tungsten lamp. Sample system : 10 mm path length matched glass test tubes. Filters : 400, 420, 480, 500, 520, 540, 620, 680 nm. Printer interface : Centronics parallel Printer interface for any dot matrix printer. RS232 Interface : Available (On Request). Weight : 2.5 Kg. Power supply : 230V AC ±10%, 50Hz. with in-built Stabilizer. Accessories : Matched Test Tube Set of 5, Operation Manual, Dust Cover, Spare Lamp.

Send Inquiry
Request To Call Back
Product Image (EM-466)

Polygraph .

Price: 10 INR/Piece

Polygraph POLYGRAPH (Multichannel Recorder) SALIENT FEATURES: Unique system of pen motors, Modular easily interchangeable in a minute or two. Pen length standard 120mm for ink writing system improving upon the international standard (100mm) as per GRASS or BECKMAN. Shorter pen length would mean greater arc distortions which is synonymous with wave form distortion and arc distortion. Pen length below 100mm is not internationally accepted FREQUENCY RESPONSE : with 120mm ink pen length 70Hz-3db. with shorter ink pens 75 or 80mm length this response will be appreciably higher. CHART DRIVE : with completely silent gear train fitted with finest imported synchronous motor free from any black lash. Noisy or large humming gear train or motor can introduce Bio-feed back signals. Z fold chart paper for easy back reference and recording. Ripple free power supply with high stabilization and overload protection. Modular Time & Event channel (optional).

Send Inquiry
Request To Call Back
Product Image (JKA-200)

Bicycle Ergograph

Price: 10 INR/Piece

Bicycle Ergograph We are identified as one of the celebrated Medical Bicycle Ergograph Manufacturers in India. The Bicycle Ergograph is designed ideally to measure the work capacity of a muscle or group of muscles during contraction. Additionally, customers are eased with the availability of the Wooden Stand Bicycle Ergograph loaded with all the advanced features. A bicycle frame is supported by a wooden stand, from the front of which two uprights ascend and carry a desk and cross piece, which provide for the attachment, directly in front of the subject, of the tension balances and other pieces in front of the subject, of the tension balances and other pieces of apparatus. A cast iron wheel of 5 1/2 feet in circumference, weighing 22 Kilos and mounted on ba.

Send Inquiry
Request To Call Back
Product Image (JIR-01)

Ir Moisture Balance

Price: 10 INR/Piece

Ir Moisture Balance IR Moisture Balance: A basic method for determination of moisture content, measure percent by weighing and drying simultaneously. Infra red radiation are reflected by a bulb and its temperature is controlled by a regulator. The balance scale is divided in terms of moisture content on wet weight basic. It Works on 220V AC 50Hz mains. Specifications:- Range : 0-100% Accuracy : ±0. 2% Weight : 20 kg. Sample weight : 5gm, 20gm & 25gm

Send Inquiry
Request To Call Back
Product Image (EM-251)

Digital Viscometer

Price: 10 INR/Piece

Digital Viscometer It has the advantage of high accuracy, stable digital display, easy to operate and good anti-interference. It is widely used in the measurement of viscosity of various kinds of fluid such as grease, paints, food, medicine, adhesive and cosmetics. etc. It can also be used to determine the viscosity resistance and absolute viscosity of the liquids. Its with led display. Measurement range is 10-1 x 105 mpa.s with 4 spindles, 6/12/30/60 rotor speed (rpm), + 5 % newtonian fluid. Provided with rs232c interface.

Send Inquiry
Request To Call Back
Product Image (EM-42)

Vertical Slab Gel Electrophoresis Apparatus

Price: 10 INR/Piece

Vertical Slab Gel Electrophoresis Apparatus (Cat No. - EM-42) Vertical Slab Gel Electrophoresis Apparatus is made out of thick perspex sheet with fixed upper and lower buffer tanks with 1 comb, 3 spacers, 1 plain glass plate, 1 notched glass plate, clamps electrode terminals & platinum electrodes of 99. 9% purity.

Send Inquiry
Request To Call Back
Product Image (P-T3P)

Tablet Polishing Pan

Price: 10 INR/Piece

Tablet Polishing Pan (Cat No. - P-T3P) Tablet Polishing Pan : Detachable polishing pan for use with polishing is made of mild steel painted and provided with inner lining of superior canvas cloth, inner diameter 12" x 8" high with opening of 7" diameter neck.

Send Inquiry
Request To Call Back
Product Image (P-T3)

Tablet Coating Pan

Price: 10 INR/Piece

Made of stainless steel dia 12. Machine fitted with oil-immersed gear box driven by a suitable motor. An independently working hot air blower has been provided. An energy regulator has been provided to control temperature from 5C above ambient to 70C. A separate switch for the blower has been provided. Complete with neon indicator. Machine to work on 220V AC 50 Hz single phase.

Send Inquiry
Request To Call Back
Product Image (P-T1B)

Tablet Making Machine Electrically Operated

Price: 10 INR/Piece

Tablet Making Machine(electrically Operated) Tablet Making Machine (Electrically Operated) : Hammer type and provided with suitable motor, workable on220V AC 50Hz single phase. Optional : Spare punch & die of chrome steel of 6, 9 & 12 mm Note : Ask for rotary tablet machine.

Send Inquiry
Request To Call Back
Product Image (P-S4)

Sietz Filter

Price: 10 INR/Piece

Sietz Filter (P-S4) : Sietz Filter : For use with filter pads clarification and sterilization Seltz filters made from solid stainless steel bar are specially designed for effective filteration of all types of liquid in various laboratories, when filter pads are employed with they remove all matters and even particle of cellodie nature liquids. Available in following capacities : 14 cm to take 140 mm filterpad cap. 500 ml. 6 cm to take 60 mm filterpad cap. 60 ml. 3 cm to take 30 mm filterpad cap. 30 ml. Filter pad of 25 Nos. : 3 cm., 6 cm. and 14 cm.

Send Inquiry
Request To Call Back
Product Image (P-S3)

Suppository Mould

Price: 10 INR/Piece

Suppository Moulds P-S3 Suppository Moulds : These are usually made from brass available as below ; 2 moulds (1, 2, 3, or 4 gr.) - Any one size 4 moulds (1, 2, 3, or 4 gr.) - Any one size 6 moulds (1, 2, 3, or 4 gr.) - Any one size 8 moulds (1, 2, 3, or 4 gr.) - Any one size 12 moulds (1, 2, 3, or 4 gr.) - Any one size

Send Inquiry
Request To Call Back
Product Image (P-R3)

Digital Rheometer

Price: 10 INR/Piece

Digital Rheometer (Cat No. - P-R3) Feature and Benefits of Digital Rheometer Sophisticated Rheometer with continuous sensing and display. Stand-alone programming: Enter data, temperature requirements, start program, see results on built-in display. Computer programmable using optional Rheocalc 32 software lets you control all aspects of rheological testing directly from the computer. The tool to easily predict a materials flow, spray or pumping behaviour by studying shear rate profiles. Has built-in math models for data analysis in stand-alone mode, eg. Casson. Complete with appropriate spindles, Rheoloader program, power base, guard leg and carrying case. Accuracy: 1.0% of range Repeatability: 0.2%.

Send Inquiry
Request To Call Back
Product Image (P-M4)

Mixing Vat With Stirrer

Price: 10 INR/Piece

Mixing Vat With Stirrer : (P-M4) Mixing Vat with Stirrer : A 3 litre capacity vat with lid made of stainless steel sheet fitted on a mild steel stout stand of circular shape provided with rubber feet. A suitable shaft with blade for stirring provided on a suitable stand with height adjustment arrangement. A fractional H.P. Motor workable on 220V AC 50Hz single phase, indicator, plug, and cord provided.

Send Inquiry
Request To Call Back
Product Image (P-D3M)

Microprocessor Based Dissolution Test Apparatus

Price: 10 INR/Piece

Microprocessor Based Dissolution Test Apparatus Specifications General Display 20 x 4 Line Alphanumeric LCD display with Backlit Keyboard 19 soft touch membrane keys LED 6 LEDs, 3 LEDs for Test status like Run, Alarm, End and 2 LEDs for Platform up/down status and one for heater ON/OFF status. Prog. Mode Routine, Sustain and Control mode. Facility for 20 different test setups available in Routine and Sustain mode. Printer Provision for the attachment of dot-matrix printer with centronics parallel port interface available. Stirrer Speed 25 - 200 RPM, ± 1 RPM Resolution 1 RPM Accuracy ± 1 RPM Temperature Range 30 - 50 C Accuracy + 1 C Temp. Control Microprocessor Based using PT100/Semiconductor Sensor Sampling Reaction Vessel 1000 ml jars with stirrer pedals and baskets Heater 1 KW Power 230 V ± 10%, 50 Hz. AC Accessories Main Unit with Acrylic Tank and Rectangular Cover Plate and Water Bath Temperature Sensor (T1) External Temperature Sensor (T2) for Vessel Reaction Vessel capacity 1000 ml (8 Nos. in Model - 1918 and (6 + 1) Nos. in Model - 1916) Round Acrylic Cover Plate with Hole and a large slit (8 Nos. in Model - 1918 & 6 Nos. in Model - 1916) S.S. Paddle, S.S Wire Mesh Basket (8 Nos. in Model - 1918 & 6 Nos. in Model - 1916) Glass pipettes with rubber bellows Mains Lead Instruction Manual Dust Cover

Send Inquiry
Request To Call Back
Product Image (P-C8)

Small Animal Cage

Price: 10 INR/Piece

Small Animal Cage Small Animal Cage: Made of steel body duly powder coated or stainless steel. With feeding bottle and feeding bowl, the removable waste collecting tray below the cage size : 18 x 18 x 14 18 x 18 x 20 24 x 24 x 18 Note : Rack for above at extra cost.

Send Inquiry
Request To Call Back
Product Image (P-C3)

Collapsible Tube Ointment Filling Machine

Price: 10 INR/Piece

Collapsible Tube / Ointment Filling Machine (P-C3) Collapsible Tube / Ointment Filling Machine : Stroke type machine. Filling capacity adjustable 5 gm to 50 gm. Detachable nozzles provided for each capacity. Hooper and contact parts made of stainless steel.

Send Inquiry
Request To Call Back
Product Image (P-B9)

Bottle and Liquid Filling Machine

Price: 10 INR/Piece

Bottle And Liquid Filling Machine P-B9 Bottle / Liquid Filling Machine : A sturdy and heavy unit made of CRC sheet mounted on a heavy angle iron duly powder coated. Capacity of output of water is adjustable through cam system knob provided from 50 ml. to 300ml. It can be operated in two ways:- Hand operated. (P-B9M ) Motorized (Semi Automatic) operated.

Send Inquiry
Request To Call Back
Product Image ( P-B8)

Bottle Washing Machine

Price: 10 INR/Piece

Bottle Washing Machine : Washing tank made of stainless steel mounted on sturdy square ms pipe frame duly powder coated, motorized driven unit embedded in a metallic box rested on the main unit with a drill check to accommodate various size of washing brushes. Workable on 220V-50Hz AC mains.

Send Inquiry
Request To Call Back
Product Image (EM-21M)

Digital Automatic Melting Point Apparatus

Digital Automatic Melting Point Apparatus Digital Automatic Melting Point Apparatus is designed for quick and accurate detection of melting point. Feature packed & easy to use, this is an indispensable bench top tool. This equipment has an arrangement to hold the capillary containing the sample in uniformly heating media. the temperature is indicated on a digital display readable in 1.0š C. At the point, when the sample melts, the heating is automatically cut-off and the digital display showing the temperature remains on the indicator till it is cleared. No Silicon oil or other bath is required as heating media. Range 2.0š C above room temperature to 350š C. Specifications Display Digital 3 Digit, Bright LED Accuracy 1% Operation Fully Automatic Dimensions L 405 x B 360 x H 235 mm (approx) Power 230V + 10, 50Hz

Send Inquiry
Request To Call Back
Product Image (JEQ-19)

Stirrer .

Laboratory Stirrer Stirrer is designed to meet requirements of laboratories demanding wide flexibility of stirring operations. Shaft upto 6.5 mm diameter and 350 mm long with Ptfe rotor is provided. Fitted with 1 / 20 HP AC / DC universal motor, speed upto 4000 RPM rotary speed regulated capacity 5-7 liters (depending on viscosity). The total unit can be raised and lowered in height.

Send Inquiry
Request To Call Back
Product Image (JEQ-14)

Distillation Stills Manasty Type Wall Hanging

Distillation Stills Manasty Type Wall Hanging Distillation Stills Manasty Type Wall Hanging : Unit made of all stainless steel sheet for making pyrogen-free distilled water. Kettle element with cut-out system has been employed. Clamps have been provided for wall hanging. Supplied with plug-cord to work on 220V AC 50Hz single phase. Capacities available : 2, 4, 5, 6, 8, 16 & 20 litres per hour.

Send Inquiry
Request To Call Back
Product Image (J-11S)

Sledge Microtome

Sledge Microtome Sledge Microtome are designed for cutting large blocks of paraffin and resin embedded material including whole organs, for light microscopy. The knife holding clamps allow the knife to be offset to the direction of cut, a major advantage when sectioning large, hard blocks. The microtome, which is very heavy for stability and not usually subject to vibration, can also be used to cut materials from various industrial applications (wood, plastics, textile fibers). Technical Features:- Length of sliding track :27cms. Total feed excursion :25mm. Object stage opening :31X26mm. Accessories supplied with Equipment:- Razor-120mm-on. Object holders-set of three. Oilcan-one. Packed in card board box.

Send Inquiry
Request To Call Back
Product Image (J-6)

Rotary Microtome Erma Type

Rotary Microtome Erma Type The Rotary Microtome Erma Type type is a simple but versatile Rotary Microtome for cutting of uniform sections up to 25 microns in steps of 1 micron each. The internal structure is completely encased in a metallic cover. The selected alloys are used in fabrication of the machine and razor. Accessories supplied with equipment:- Razor-120 mm with back & handle-one Object holders-set of three Honing plate-one Oilcan-one Packed in card board box and thermocol packing

Send Inquiry
Request To Call Back
Product Image (J-8E)

Fully Automatic Microtome

Fully Automatic Microtome Fully Automatic Microtome is a fully automatic microtome based on latest technology that functions on ball bearing guides and a microprocessor based control system with following specifications. It incorporates automatic memorization and recovery, a hand wheel which is lockable in any position, high volume trash tank, convenient specimen clamp, disposable embedding cassette clamp and paraffin clamp, safe alarm system, dormancy protection and advanced imported drive system. Smartly located feather touch buttons can control all the functions effortlessly. It can be used for semi-thin to thick sectioning of both soft and hard specimens. Technical Specifications Section Thickness Setting Range 0.5100 m Trimming Thickness Setting Range 1600 m Setting values 0.52 m increment step 0.5 m 210 m increment step 1 m 1020 m increment step 2 m 20100 m increment step 5 m Minimum setting value 0.5 mm Vertical specimen stroke 60 mm

Send Inquiry
Request To Call Back
Product Image ( JEQ-2A)

Rectangular Water Bath

Rectangular Water Bath Rectangular Water Bath (Thermostatic Control) : Double walled construction. Its Inner chamber made of stainless steel sheet and outer of mild steel sheet duly finished in powder coated. The gap is filled with glass wool for temp. insulation. Its Temperature range 40š C above ambient to 100š C controlled by a thermostat. This product complete with concentric rings, pilot lamp, plug cord etc. Water Bath works on 220V AC 50Hz single phase. Optional Accessories : Digital Temperature Indicator or indicator-cum-Controller. Single wall construction. Technical Specifications: Chamber size in mms. No. of holes & Diameter 300 x 250 x 100 6 holes of 75mm dia. 300 x 300 x 100 9 holes of 75mm dia. 405 x 300 x 100 12 holes of 75mm dia.

Send Inquiry
Request To Call Back
Product Image (MTK-746B)

Coupled Tank System

Coupled Tank System Interconnected graduated tanks. Collector tank. Solenoid valves. Control electronics for solenoid control valves. Siemens sinamics g110 frequency inverter. Siemens sinamics g110 basic operator panel (bop). Siemens sitrans pressure transducers. Siemens sitrans level transducers. Flow transducers. Level sensors. Pump. Constant flow auxiliary pumps. Power supply:24 v DC, 3 A Size (w x h x d):700 x 1300 x 595 mm.(approx)

Send Inquiry
Request To Call Back
Product Image (MTK-747)

Transducer Kit

Transducer Kit (Electro-Mechanical Transducers, Heat Transducer, Light Transducer) The Transducers Kit provides student assignments covering a wide range of transducers and a number of standard signal processing methods. The range consists of a Measurements Package, containing a comprehensive Instrumentation Module, a Power Amplifier and a Test Rig, plus three self-contained Transducers Kits. The kits are available separately, for use with the Measurements Package, allowing complete transducer workstations to be built-up in stages Electro-mechanical Transducers Kit comprises six linear displacement transducers. It is the foundation kit for the TK2942 range and introduces some basic principles about transducers and the associated instrumentation requirements. The two other kits is regarded as extensions to it. Heat Transducers Kit provides a heat bar, three thermal transducers and a bimetal switch together with temperature measurement accessories. Light Transducers Kit contains an optical detector assembly, three photo electric devices and a selection of optical filters.

Send Inquiry
Request To Call Back
Product Image (MTK-743)

Magnetic Levitation System Trainer

Magnetic Levitation System Trainer Sampling Frequency : 30KHz (AD) Power Input : AC220 V 50HZ 3A. Control Range : 1- 20mm (m=22g, diameter =25mm), 115mm (Steel ball m=120g , diameter =55mm). Control Precision : 0.1 mm Winding Turns : 2450 Winding Inductance : 135 MHz Winding Dimension : Diameter=20 mm , H=94mm LED Light Source : +12V, 1W Size : 350mm x 178mm x 376mm (LxWxH) approx.

Send Inquiry
Request To Call Back
Product Image (MTFB-16A)

Filament Bulbs E10

Filament Bulbs E10 Base E10 Bulb diameter: 10 mm, Enrollment of the permissible voltage and current on the base. Pack of 25. Voltage: 3.5 V Intensity: 300 mA

Send Inquiry
Request To Call Back
Product Image (MT-795)

Torque Measuring Unit

Torque Measuring Unit Display: 61 mm x 34 mm supper large LCD display 15 mm ( 0.6" )digit size. Measurement: Torque value, peak hold, data hold, Max. & min. value. Display unit: Kg -cm/LB-inch/Newton-cm Sensor: Exclusive torque sensor Circuit: Exclusive microcomputer circuit Data hold: Freeze the desired reading Peak hold To hold the peak value Memory: Maximum &Minimum value Power off: Auto shutoff, saves battery life, or manual off by push button Power supply: Alkaline or heavy duty type DC 9V battery.

Send Inquiry
Request To Call Back
Product Image (MTK-321)

Bread Board

Bread Board Solder less Material : Plastic

Send Inquiry
Request To Call Back
Product Image (MTK-320B)

Decade Lcr Box

Decade Lcr Box Range: 1 to 1M 10pF to 1uF 10uH to 10H

Send Inquiry
Request To Call Back
Product Image (EM-36)

Ph Control

Ph Control This bench top unit consists of a stirred reactor that is fed with an acid solution by a metering pump. Controlling the flow rate of another metering pump that sends basic solution into the reactor enable to control the pH inside the reactor. This unit enables to develop and analyze the following subjects: Proportional, Integral and Derivative control. Setup of controllers. Response and characteristics of the process. Determining dead time. Tuning the controller. Calibrating a pH-meter. Technical Characteristic required: Framework of stainless steel. pH transmitter with range of 0-14 pH and 4-20 MA output. 2 metering pumps with 4-20 ma input. 2 tanks of stainless steel with capacity of 13 liters. Tank of stainless steel with capacity of 26 liters. Reactor of stainless steel with variable-speed (0-600 rpm) stirrer and capacity of 3 liters. Piping and valves of stainless steel. Switchboard of painted carbon steel with synoptic and measuring terminals for input and output signals of the controller. Connection panel for external control devices, included in the switchboard. Complete with: Silenced air compressor 220-240 V / 50 Hz Air displacement:50 l/min. Safety valve Pressure gauge Motor with thermal overload protection Operating pressure: max. 10 bar controlled by a pressure switch Noise level:40 dB /1 m Size of the air tank:24 lt. Power:0,5 HP Personal computer Last generation

Send Inquiry
Request To Call Back
Product Image (MTS-101365A)

Trainer for Various Heat Exchangers

Trainer for Various Heat Exchangers Examination and comparison of various heat exchanger types Five different types of heat exchangers included in the scope of delivery Finned heat exchanger with fan Operating mode (parallel flow or counter flow) selectable via valves Flow rates adjustable via valves Electromagnetic flow meter Digital displays for temperature, pressure differences and flow rate Hot and cold water benches (WL 312.10 and WL 312.11) available for independent operation Water/steam heat exchanger unit (WL 315.01) and electrical steam generator (WL 315.02) available for further experiments Software for data acquisition via USB under windows vista or windows 7 Technical Data Plate heat exchanger,10 plates Heat transfer surface area: approx.0,26m² Capacity:15kw Tubular heat exchanger Heat transfer surface area:0,1m² Shell and tube heat exchanger Capacity: 13kw Finned cross-flow heat exchanger Heat transfer surface area: approx.2,8m² Max. Flow rate fan: 780m³/h Max. Pressure difference fan: 430Pa Jacketed vessel with stirrer Heat transfer surface area (vessel):0,16m² Heat transfer surface area (coil):0,17m² Measuring ranges Differential pressure air: 0...10mbar Differential pressure water: 0...1000mbar Flow rate: 0...3m³/h Temperature: 0...100c Dimensions and Weight:- LxWxH: 2010x800x1760mm Weight: approx. 250kg

Send Inquiry
Request To Call Back
Product Image (MTK-741)

Jumper Wires

Jumper Wires 40 Pcs in 10 different colour For connecting standard 2 Wire size : 26 awg

Send Inquiry
Request To Call Back
Product Image (MTK-319)

Resistor Decade Box

Resistor Decade Box 0.01 to 10M

Send Inquiry
Request To Call Back
Product Image (MT-781)

Slip-ring 3 Induction Machines

Slip-ring 3 Induction Machines Speed : <500 RPM Material : Cast Iron

Send Inquiry
Request To Call Back
Product Image (MTE-775)

Starting Capacitor Unit

Starting Capacitor Unit Voltage Rating : 450V Capacitance : 16 uF Temperature : 25 Degree C to 85 Degree C Frequency (Hz) : 50 Phase : Single

Send Inquiry
Request To Call Back
Product Image (MTK-314A)

Fuse .

FUSE fuse : 3.15, 5, 7, 10, 1

Send Inquiry
Request To Call Back
Product Image (MTE-771)

Split Phase Motor

Split Phase Motor Motor Design: Split-Phase HP : 1/3 Nameplate RPM : 1725 Frame : 48Z Voltage : 115 Hz : 60 Phase 1 Full Load Amps : 7.0 No. of Speeds : 1

Send Inquiry
Request To Call Back
Product Image (MTK-313B)

Intermediate Switches

INTERMEDIATE SWITCHES Voltage: 220-240V 10Amp 1/2 way & intermediate models

Send Inquiry
Request To Call Back
Product Image (MTK-313A)

Two Way Switches

TWO WAY SWITCHES 6 Pin DPDT Black Button On/Off/On Rocker Switch AC 250V/10A 125V/15A Type: Two Way

Send Inquiry
Request To Call Back
Product Image (MTK-313)

Switches Spst

SWITCHES SPST Frequency :50 Hz Power Type :AC Current :2 Amp Voltage :220 V No of Pin :2 Pin

Send Inquiry
Request To Call Back
Product Image (MTK-312B)

Electro Mechanical Hi-Pot Tester

ELECTRO MECHANICAL HI-POT TESTER Power:Electronic Input power:AC220V±10%, 50Hz Voltage output:AC 0-10kV DC 0-14kV Current output:5A

Send Inquiry
Request To Call Back
Product Image (MTK-311)

Electric Cordless Screwdriver Set

Electric Cordless Screwdriver Set Weight : 0.4 kg Voltage : 4.8 V Torque : 3.5 Nm Battery Type : 1.2 V.Nicd Charging Time : 3-5 hours No. Load Speed : 200 RPM

Send Inquiry
Request To Call Back
Product Image (MTK-308)

Standard/ Flat/ Head Set

Standard/ Flat/ Head Set Standard screws with 2-56 thread and 3/8" long. Recommended for the small button pad sets. Used with a 2-56 nut. Sold in single units.

Send Inquiry
Request To Call Back
Product Image (MT-761)

Single-phase transformer

Single-phase transformer Phase : single phase Cooling type : dry type/air cooled Input voltage : 240 v Output voltage : 24 v Frequency : 50 hz Usage/application : battery charger

Send Inquiry
Request To Call Back
Product Image (MTK-313C)

Triple Switch

TRIPLE SWITCH White 3 Gang 2 Way Switch Square edge Height : 85mm Width : 85mm Depth : 9mm

Send Inquiry
Request To Call Back
Product Image (MTE-767)

Eddy- Current Braking System

Eddy- Current Braking System For demonstration of eddy current braking when used in conjunction with the hand wheel driving unit. The 120mm diameter aluminum disc has a 20mm driving pulley. The powerful circular magnets are carried on a pivoted arm so that they may be moved over or away from the disc as required. Dimensions of base: 165 x 165mm approx.

Send Inquiry
Request To Call Back
Product Image (MTE-768)

Power Braking System

Power Braking System Serves in connection with the control unit to record the torque in 1.0 kW electrical machines. The current supply is provided by the control unit via a connecting cable with a multi-pin plug. The brake is protected from overloading by separate ventilation and a thermo-switch. Braking torque: max. 20Nm Mains connection for ventilator: 220 V, 50 Hz

Send Inquiry
Request To Call Back
Product Image (MTK-314)

Cb, Fuses And Relays Circuit Breaker

Cb, Fuses And Relays Circuit Breaker Current : 10, 16, 25, 32, 50, 63 A

Send Inquiry
Request To Call Back
Product Image (MTK-315)

Thermal Over Load Relay

THERMAL OVER LOAD RELAY voltage (V):230V Number of Poles:3 Pole Current (Amps):0.1 A to 0.16 A Application :Motor Frequency (Hz):50

Send Inquiry
Request To Call Back
Product Image (MTE-778)

Starting Inductor Unit

Starting Inductor Unit Diameter : 13mm

Send Inquiry
Request To Call Back
Product Image (MTK-318)

Inductor Inductor

INDUCTOR Size: 1.0nH, 1.1nH, 1.2nH, 1.3nH, 1.5nH, 1.6nH, 1.8nH, 2.0nH, 2.2nH, 2.4nH, 2.7nH, 3.0nH, 3.3nH, 3.6nH, 3.9nH, 4.3nH, 4.7nH, 5.1nH, 5.6nH, 6.2nH, 6.8nH, 7.5nH, 8.2nH, 8.7nH, 9.1nH 10nH, 11nH, 12nH, 13nH, 15nH, 16nH, 18nH, 20nH, 22nH, 24nH, 27nH, 30nH, 33nH, 36nH, 39nH, 43nH, 47nH, 51nH, 56nH, 62nH, 68nH, 75nH, 82nH, 87nH, 91nH 100nH, 110nH, 120nH, 130nH, 150nH, 160nH, 180nH, 200nH, 220nH, 240nH, 270nH, 300nH, 330nH, 360nH, 390nH, 430nH, 470nH, 510nH, 560nH, 620nH, 680nH, 750nH, 820nH, 870nH, 910nH 1.0uH, 1.1uH, 1.2uH, 1.3uH, 1.5uH, 1.6uH, 1.8uH, 2.0uH, 2.2uH, 2.4uH, 2.7uH, 3.0uH, 3.3uH, 3.6uH, 3.9uH, 4.3uH, 4.7uH, 5.1uH, 5.6uH, 6.2uH, 6.8uH, 7.5uH, 8.2uH, 8.7uH, 9.1uH 10uH, 11uH, 12uH, 13uH, 15uH, 16uH, 18uH, 20uH, 22uH, 24uH, 27uH, 30uH, 33uH, 36uH, 39uH, 43uH, 47uH, 51uH, 56uH, 62uH, 68uH, 75uH, 82uH, 87uH, 91uH 100uH, 110uH, 120uH, 130uH, 150uH, 160uH, 180uH, 200uH, 220uH, 240uH, 270uH, 300uH, 330uH, 360uH, 390uH, 430uH, 470uH, 510uH, 560uH, 620uH, 680uH, 750uH, 820uH, 870uH, 910uH

Send Inquiry
Request To Call Back
Product Image (MTS-718)

Change of State of Gases

Change of State of Gases Experimental investigation of gas laws Transparent measuring tank 1 for investigation change of state of gases Hydraulic oil filling for changing volume of test gas Built-in compressor generates necessary pressure differences to move the oil volume Compressor can also be used as vacuum pump 5/2-way valve for switching between compression and expansion Transparent measuring tank 2 for investigation of isochoric change of state Electrical heater with temperature control in tank 2 Sensors and digital displays for temperatures, pressures and volumes Software for data acquisition via USB under windows Technical Data Compressor / vacuum pump power output:60W delivery side:2bar intake side:213mbar Temperature controller:PID, 300W, limited to 80C Measuring ranges Temperature Tank 1:0...80c Tank 2:0...80c Pressure Tank 1:0...4bar absolute Tank 2:0...2bar absolute Volume Tank 1:0...3l Dimensions and weight:900x550x900mm Weight:approx. 50kg

Send Inquiry
Request To Call Back
Product Image (MT-789)

Reluctance motor

RELUCTANCE MOTOR Output: 1.1-"350 kW

Send Inquiry
Request To Call Back
Product Image (MT-790)

Starting and Synchronization Unit

Starting and Synchronization Unit Voltage : 24V DC IP Rating : IP68 Size : 160 x 220 mm

Send Inquiry
Request To Call Back
Product Image (MT-792)

Power Supply Module

Power Supply Module The module: Output voltages Variable ac:3 x 0-380 V, 2 A Fixed ac : 3 x 380 V + N, 10 A Standard fixed ac : 220 V, 3 A Variable dc : 0-240 V, 4 A Fixed dc : 220 V, 4 A Power supply : 3 x 380 V + N, 50/60 Hz

Send Inquiry
Request To Call Back
Product Image (MTK-307)

Star Head Set

STAR HEAD SET Surface treatment:Zinc Plated Material: Stainless Steel

Send Inquiry
Request To Call Back
Product Image (MTK-309)

Philips Head Set

Philips Head Set Material : Stainless Steel

Send Inquiry
Request To Call Back
Product Image (MTK-310)

Adjustable Wrench

Adjustable Wrench (RING) Material: Stainless Steel 24-Inch Adjustable Wrench 2-1/2" Opening. Hardened & Tempered Drop Forged Alloy Steel

Send Inquiry
Request To Call Back
Product Image (MTS-712)

Adsorption .

Adsorption 2 absorbers with activated carbon filling Absorbers with 8 sampling points Safety absorbers for closed water circuit Continuous process Metering pump for concentrated adsorbate solution Pump for recalculating the treated water Water temperature control Digital temperature indication Flow rate adjustable Change of adsorb ate concentration and contact time Technical data: Adsorber and safety adsorbed Inside diameter: each 60mm Height:each 600mm Capacity:each 1700cm3 Tanks: Treated water:45l Adsorb ate solution:45l Circulation pump: Max. Flow rate:180l/h Max. Head:10m Metering pump: Max. Flow rate:2,1l/h Inside diameter:each 60mm Height:each 600mm Heater: Max. Power:500w Measuring ranges: Flow rate:060l/h Temperature:060c Pressure:02,5bar 230v, 50hz, 1 phase 230v, 60hz, 1 phase 120v, 60hz, 1 phase Ul/csa optional Dimensions and weight lxwxh: 1500x790x1900mm(Approx) Weight: approx. 180kg

Send Inquiry
Request To Call Back
Product Image (MT-305C)

Hall Effect Clamp Meter

Hall Effect Clamp Meter 2000A AC/DC Clamp Meter Jaw size 57mm Hall Effect sensor Auto zero 9V Battery

Send Inquiry
Request To Call Back
Product Image (MTK-305)

Geo Earth Ground Tester

Geo Earth Ground Tester Automatic Frequency Control (AFC) - identifies existing interference and chooses a measurement frequency to minimize its effect, providing more accurate earth ground value R* measurement - calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to earth ground would see Adjustable limits - for quicker testing 3- and 4-pole Fall-of-Potential, earth resistance loop testing 4-pole Soil Resistivity testing Selective earth ground rod testing using 1 clamp Stakeless earth ground rod testing using 2 clamps IP56 rated for outdoor use

Send Inquiry
Request To Call Back
Product Image (MTK-304)

Tachometer .

Tachometer Display: Digits 18mm (0.7 inch ) LCD Range: 5 to 99999 RPM Power Supply: 4 x 1.5V AA Battery

Send Inquiry
Request To Call Back
Product Image (MTK-302)

Digital Wattmeter

Digital Wattmeter Type : Single Phase True Watt meter. Display : 4-Digit bright red seven segment display with floating decimal. Measurement:True RMS Measurement. Micro controller Based Accurate and Reliable. Accuracy : Class 0.5. Voltage Range : 300 V / 600 V AC (20% to 100% of maximum Value). Current Range : 5A/10A/20A AC (20% to 100% of Maximum Value). Current Transformer is used as a Current Transducer for durability. Aux. Supply : 230V + 20% / 110V + 20% AC.

Send Inquiry
Request To Call Back
Product Image (MTK-317)

Capacitor Capacitor

Size: 10pF, 12pF, 15pF, 18pF, 22pF, 27pF, 33pF, 39pF, 47pF, 56pF, 68pF, 82pF 100pF, 120pF, 150pF, 180pF, 220pF, 270pF, 330pF, 390pF, 470pF, 560pF, 680pF, 820pF 1.0nF, 1.2nF, 1.5nF, 1.8nF, 2.2nF, 2.7nF, 3.3nF, 3.9nF, 4.7nF, 5.6nF, 6.8nF, 8.2nF 10nF, 12nF, 15nF, 18nF, 22nF, 27nF, 33nF, 39nF, 47nF, 56nF, 68nF, 82nF .10uF, .12uF, .15uF, .18uF, .22uF, .27uF, .33uF, .39uF, .47uF, .56uF, .68uF, .82uF 10uF, 22uF, 33uF, 47uF, 100uF 10.0pF, 11.0 pF, 12.0 pF, 13.0 pF, 15.0 pF, 16.0 pF, 18.0 pF, 20.0 pF, 22.0 pF, 24.0 pF, 27.0 pF, 30.0 pF, 33.0 pF, 36.0 pF, 39.0 pF, 43.0 pF, 47.0 pF, 51.0 pF, 56.0 pF, 62.0 pF, 68.0 pF, 75.0 pF, 82.0 pF, 91.0 pF 100 pF, 110 pF, 120 pF, 130 pF, 150 pF, 160 pF, 180 pF, 200 pF, 220 pF, 240 pF, 270 pF, 300 pF, 330 pF, 360 pF, 390 pF, 430 pF, 470 pF, 510 pF, 560 pF, 620 pF, 680 pF, 750 pF, 820 pF, 910 pF 1.0nF, 1.1nF, 1.2nF, 1.3nF, 1.5nF, 1.6nF, 1.8nF, 2.0nF, 2.2nF, 2.4nF, 2.7nF, 3.0nF, 3.3nF, 3.6nF, 3.9nF, 4.3nF, 4.7nF, 5.1nF, 5.6nF, 6.2nF, 6.8nF, 7.5nF, 8.2nF, 9.1nF 10nF, 11nF, 12nF, 13nF, 15nF, 16nF, 18nF, 20nF, 22nF, 24nF, 27nF, 30nF, 33nF, 36nF, 39nF, 43nF, 47nF, 51nF, 56nF, 62nF, 68nF, 75nF, 82nF, 91nF 100nF, 110nF, 120nF, 130nF, 150nF, 160nF, 180nF, 200nF, 220nF, 240nF, 270nF, 300nF, 330nF, 360nF, 390nF, 430nF, 470nF, 510nF, 560nF, 620nF, 680nF, 750nF, 820nF, 910nF 10.0uF, 11.0 uF, 12.0 uF, 13.0 uF, 15.0 uF, 16.0 uF, 18.0 uF, 20.0 uF, 22.0 uF

Send Inquiry
Request To Call Back
Product Image (MTK-743A)

Digital Pendulum

Digital Pendulum Pendulum set-up control Plant control. PID controller. PID control of cart model position. Real-time PID control of cart position. Real-time swing-up control. Inverted pendulum control of swing-up. Inverted pendulum stabilization. Crane control. Combined control techniques. Swing-up & hold. Up & down model

Send Inquiry
Request To Call Back
Product Image (MTK-743B)

Twin Rotor Mimo Trainer

Twin Rotor Mimo Trainer The Twin Rotor System demonstrates the principles of a non-linear MIMO (Multiple Input Multiple Output) system, with significant cross-coupling. Its behaviour resembles a helicopter, but the angle of attack of the rotors is fixed and the aerodynamic forces are controlled by varying the speeds of the motors.

Send Inquiry
Request To Call Back
Product Image (MTK-745)

Ball & Plate Control System Trainer

Ball & Plate Control System Trainer Calibrated base dimensions : 350 mm x 410 mm Table dimensions :288 mm x 355 mm Touch surface dimensions : 17„„ Motor torque :4.8 V:0,5 N.M Motor speed :4.8V: 0.17 sec/60

Send Inquiry
Request To Call Back
Product Image (MT-905D)

Coulomb / Newton Forces Device

Coulomb / Newton Forces Device Experimental determination of the Coulomb force Large dimensions, visible by all the class Very rich, this device makes it possible, from simple measurements (mass, lengths, angles), to exploit several notions of physics. Performable experiments- Electrification by influence Demonstration of Coulomb repulsion Demonstration of Coulomb attraction Balance of forces at equilibrium Experimental determination of Newtons force Experimental determination of the Coulomb force Electrostatic chime. The device connected to a Wimshurst machine or a Van de Graaff generator. The electrocution of the spheres done by influence, simply by rubbing a plastic ruler with a cloth. Practical, it folds completely and is superimposed perfectly. Dimensions : 350 x 110 x 350 mm. Composition - 1 gantry 2 conductive spheres attached to a conductor wire 2 conductive spheres attached to an insulating wire 1 set of accessories to make an electrostatic chime.

Send Inquiry
Request To Call Back
Product Image (MT-903A)

Electronic Assembly

Electronic Assembly Composition 1 ebonite stick - 10 x 120 mm 1 acrylic stick - 10 x 200 mm 1 brass - acrylic stick - 10 x 200 mm 1 glass stick - acrylic - 10 x 200 mm 1 synthetic skin - 150 x 150 mm 1 silk veil - 150 x 150 mm

Send Inquiry
Request To Call Back
Product Image (MT-902E)

Electrostatic Pendulum

Electrostatic Pendulum Insulating pot with polystyrene ball Dimensions : 80 x 105 x 250 mm

Send Inquiry
Request To Call Back
Product Image (MT-901G)

Graaff Van Generator

Graaff Van Generator Very large and very spectacular apparatus Sparks up to 100 mm Spheres diameters 260 mm and 100 mm The Van de Graaff vertical generator comprises a silicone belt that acts as a conveyor for electric charges. Its movement is ensured by two cylindrical pulleys. One of them is in the hollow metallic sphere. The sphere is at the top of an insulating column which contains the belt. At the base of the device is a crank which actuates the driving pulley. On this type of generator, the larger the spherical envelope, the higher its potential. Theoretically, with a perfect surface for the metal sphere, the maximum voltage is of the order of 30 kV for each centimeter of radius. This theoretical value is not reached in practice because of different parameters: irregular surface, losses, etc. Technical characteristics Dimensions:750 x 260 x 380 mm Large sphere:260 mm Small sphere:100 mm

Send Inquiry
Request To Call Back
Product Image (MT-811A)

Angular Sensor

Angular Sensor Range : 270 / 140 mm Resolution : 0.06

Send Inquiry
Request To Call Back
Product Image (MT-203)

Optical Fork and Pulley

Optical Fork and Pulley Solution:21 mm

Send Inquiry
Request To Call Back
Product Image (MTUC-25)

U - core

U-CORE Transformer core in steel section 30 x 30 mm Dimensions: 105 x 110 x 30 mm.

Send Inquiry
Request To Call Back
Product Image (MT-805V)

Voltmeter Ac/Dc

Voltmeter Ac/Dc Range : -10 to 10 V Resolution : 6.5 mV

Send Inquiry
Request To Call Back
Product Image (MT-804M)

Millivoltmeter Ac/Dc

Millivoltmeter Ac / Dc Range : -500 to 500 mV Resolution : 0.338 mV

Send Inquiry
Request To Call Back
Product Image (MT-813A)

Arterial Pressure

Arterial Pressure Digital display with hand cuffs

Send Inquiry
Request To Call Back
Product Image (MTE-PN6)

Pivot Nut Clips

Pivot Nut Clips Anti-corrosive coating Good hold of glass

Send Inquiry
Request To Call Back
Product Image (MTE-RS97)

Rubber Sealing Conves

Rubber Sealing Conves Rubber cones to ensure a perfect seal Funnel and a filter Natural rubber

Send Inquiry
Request To Call Back
Product Image (MTE-RK67)

Racks for Test Tubes

Racks for Test Tubes Material : polystyrene Capacity : 60 pieces Dim. (L ” h ” p) : 246 ” 70 ” 101 mm

Send Inquiry
Request To Call Back
Product Image (MTK-PH5)

Ph Paper

Ph Paper Comes in all sizes Form of paper

Send Inquiry
Request To Call Back
Product Image (MTE-PP56)

Piston Pipeers

Piston Pipeers Plastic material resistant to common chemicals Elastomer seals Volume:0 to 2 ml Volume:0 to 10 ml Volume:0 to 25 ml

Send Inquiry
Request To Call Back
Product Image (MTE-ES6)

Spoon Weighing

Spoon Weighing LCD panel Range : 500 g Accuracy : 0.1 g Minimum weighing : 1 g Power supply : battery switch

Send Inquiry
Request To Call Back
Product Image (MT-177S)

Specific Calcium Ion Electrodes

Specific Calcium Ion Electrodes Range: Ca2 0.2 to 40 000 mg / l

Send Inquiry
Request To Call Back
Product Image (MTK-WC65)

Wooden Clips

Wooden Clips Open : 20 mm Length : 150 mm Material : wooden

Send Inquiry
Request To Call Back
Product Image (MTE-CW6)

Cutter-tube With Wheel

Cutter-tube With Wheel Cut the tubes and bars of verre Molette in carbide of tungsten

Send Inquiry
Request To Call Back
Product Image (MT-TN6)

Tightening Nuts

Tightening Nuts Coated aluminum Clamping capacity : 4 to 16 mm

Send Inquiry
Request To Call Back
Product Image (MTE-MC5)

Metal Clamp for Test Tube

Metal Clamp for Test Tube Color : Silver Height : 0.0 inches Item Weight : 1.0 ounces Length : 6.0 inches Material : Stainless Steel

Send Inquiry
Request To Call Back
Product Image (MT-176E)

Electrodes Specific to Chloride Ions

Electrodes Specific to Chloride Ions Range : Cl- 1.8 to 35 000 mg / l

Send Inquiry
Request To Call Back
Product Image (MTK-CC4)

Cutter Clamp

Cutter Clamp Chrome steel Flat ends Length : 255 mm

Send Inquiry
Request To Call Back
Product Image (MTE-EC86)

Edge Scales

Edge Scales Overload protected Easy to use Wide range of weighing ranges functions Choice of unit of measure Tare Battery wear indicator Automatic switch-off after two minutes without weighing LCD display height 15 mm Weighing range : 2000 g Resolution : 1 g Plateau : PVC 145 x 145 mm Power supply : 4 x 1.5V AA batteries Supply voltage : 230 V / 50-60 Hz

Send Inquiry
Request To Call Back
Product Image (MT-170C)

Colorimeter Range : 430 - 470 - 565 - 635 Nm

Colorimeter Range : 430 - 470 - 565 - 635 Nm

Send Inquiry
Request To Call Back
Product Image (MTE-AB43)

Aneroid Barometer

Aneroid Barometer Diameter : 70 mm Range : 960 to 1060 hpa / mbar Highest quality aneroid barometers Measuring the absolute atmospheric pressure Instrument properties and dependability an aneroid barometer is indispensable for meteorology

Send Inquiry
Request To Call Back
Product Image (MTE-VM5)

Vortex Mechanical Agitator

Vortex Mechanical Agitator Economical High stability Watertight Rotation speed: fixed 2,500 rpm 1Compatible with all types of tubes Two shaking modes:continuous or triggered by pressure on the d stirring Heavy metal case Steel base and non-slip silicone feet to ensure perfect stability on the bench.

Send Inquiry
Request To Call Back
Product Image (MT-154R)

Replacement Tank Basin

Replacement Tank Basin White rigid foam tank bottom, attaches to the tank and does not flow. Dimensions (L x h x W) : 285 x 50 x 185 mm.

Send Inquiry
Request To Call Back
Product Image (MT-153S)

Speakers Highlighting Breathing

SPEAKERS HIGHLIGHTING BREATHING (SET OF 6) Designed to characterize the breathing of living organisms. Transparent, Excellent visibility of the phenomena. Nacelle holder -Sample holes in the bottom of the nacelle ensure the circulation of gases. Small size which allows the study of finely divided fabrics. TECHNICAL CHARACTERISTICS Dimensions ( h) : 35 x 75 mm Polycarbonate tan : batch of 6.

Send Inquiry
Request To Call Back
Product Image (MTS-21012T)

SPECTRUM ANALYZER 1GHZ WITH TRACKING GENERATOR

SPECTRUM ANALYZER 1GHZ WITH TRACKING GENERATOR General Display: CRT 6 Inch. 8 x 10 internal graticule. Trace rotation: Adjustable on front panel. Line Voltage: 220V± 10%, 50-60 Hz Power consumption: Approx. 25w Operating temp. +10C to +40C Protective System: Safety class 1 (IEC 1010-1). Cabinet: 285 (W) x 125 (H) x 380 (D) mm. Weight: Approx. 7 Kg. Accessories Supplied: Instruction Manual, power cord. Optional Accessories: Sniffer Probe: High impedance Probe Magnetic field Probe Electric Field Probe Features Frequency Range: 150KHz to 1050MHz 4 Digit Display : Center & Market frequency,0.1 MHz resolution Amplitude range - 100dBm to + 13dBm Filters: 20 KHz, 250 KHz & Video Filter. Built-in Tracking generator : 0.15 MHz to 1050 MHz Output Power : + 1dBm to -50dBm (50 ohms)

Send Inquiry
Request To Call Back
Product Image (MATH CIRCLES)

MATH CIRCLES

Price: 20000.0 INR/Unit
  • Accuracy:100 %
  • Feature:Highly Efficient
  • Product Type:MATH CIRCLES
  • Type:MATH CIRCLES
Send Inquiry
Request To Call Back
Product Image (FIRST AID KIT)

FIRST AID KIT

Price: 20000.0 INR/Unit
Send Inquiry
Request To Call Back
Product Image (JRS-04D)

DEEP FREEZER

CODE: JRS-04D This refrigerator can be widely used in hospitals, clinics, laboratories, scientific research institutions, etc. And it is mainly used for the storage of RNA vaccines. External Size (W*D*H) mm: 673*676*1630. Capacity: 268L Type: Vertical, Horizontal Temp. Range: -10C-25C Temp. Accuracy: 0.1C Control System: Microprocessor Control & LED Display / LCD Display Alarm: High and low temperature; System & sensor failure; Door alarm; Power failure alarm; Thermostat alarm Refrigeration Type: Direct Refrigeration Refrigerant: R290, CFC free Compressor: International famous compressor Condenser & Evaporator: High efficiency air-cooled condenser, made of coppendy tube condenser and inner coil tube evaporator

Send Inquiry
Request To Call Back
Product Image (MATHS KIT)

MATHS KIT

Price: 20000.0 INR/Piece
Send Inquiry
Request To Call Back
Product Image (MTK-3028AF)

AF OSCILLATOR 100KHZ

AF Oscillator 100KHz 20 Hz to 200 K Hz in four bands Sine and square wave with output level meter 0-10 VP.-output impedance 600 ohms. Function Generator solid state : 1 Hz to 100 K Hz in five bands Sine square and triangular wave without variable from 0-20 volt P-P. Accuracy + 3% output impedance 50 ohms. R.F. Oscillator: Variable 100 KHz to 30 MHz giving modulated output & continuous wave from The Modulation frequency 400 Hz. And is also available on output terminals. Modulation depth 30% Accuracy + 2%

Send Inquiry
Request To Call Back
Product Image (JRS-05A)

BLOOD BANK REFRIGERATOR DOUBLE DOOR

CODE: JRS-05A Blood bank refrigerator series products are applied to places needing storage at constant temperature, such as hospitals, epidemic prevention stations, blood banks, scientific research institutions, colleges and universities, biological pharmacies, genetic engineering, entrepreneurs, etc. The storing temperature in the body can be regulated by the temperature button on the control panel. The application is convenient and the performance is reliable. Blood bank refrigerator series products are applied to places needing storage at constant temperature, such as hospitals, epidemic prevention stations, blood banks, scientific research institutions, colleges and universities, biological pharmacies, genetic engineering, entrepreneurs, etc. The storing temperature in the body can be regulated by the temperature button on the control panel. The application is convenient and the performance is reliable. Feature: Multiple sensors design: make sure the precise monitoring and programming. Double layer transparent glass door, easy to observe, also keep a better cooling temperature. Forced air refrigeration system, ensure inner temperature constant and uniform. Adjustable shelves, improve space utilization; blood storage baskets can be classified. Individual transparent inner door, effectively reduce cool air loss when opening the door. Capacity: 650L Temp. Range: 4 ï 1 deg C Temp. Accuracy: 0.1 deg C Control System: Microprocessor control Display: LED display/LCD display Alarm: Audio and visual alarm for: High or low temperature, Sensor & system failure; Door alarm, Power failure, Low battery Refrigeration Type: Forced air refrigeration system Refrigerant: R134a, CFC-Free Defrost: Auto defrost Construction: Unibody Design, Mono-assembly foaming (Rigid polyurethane insulation material) Material Internal Material: Stainless steel External Material: Cold-rolled steel with anti-bacteria powder coating Door: Double layer transparent glass door with lock, heating film preventing frosting, sealing joint strip with magnetic force. Drawers/Shelves: Transparent plastic inner door Casters: Adjustable shelves Consumption: 4 casters Power Supply: 364W

Send Inquiry
Request To Call Back
Product Image (MPH-EE-80)

AUDIO FREQUENCY FUNCTION GENERATOR 1HZ TO 200KHZ

Audio Frequency Function Generator 1Hz to 200KHz Built in high grade plastic cabinet, Useful to do experiments of amplifiers & oscillators, IC based circuit with high quality output.

Send Inquiry
Request To Call Back
Product Image (JRS-05)

BLOOD BANK REFRIGERATOR SINGLE DOOR

CODE: JRS-05 Blood bank refrigerator series products are applied to places needing storage at constant temperature, such as hospitals, epidemic prevention stations, blood banks, scientific research institutions, colleges and universities, biological pharmacies, genetic engineering, entrepreneurs, etc. The storing temperature in the body can be regulated by the temperature button on the control panel. The application is convenient and the performance is reliable. Multiple sensors design: make sure the precise monitoring and programming. Double layer transparent glass door, easy to observe, also keep a better cooling temperature. Forced air refrigeration system, ensure inner temperature constant and uniform. Adjustable shelves, improve space utilization; blood storage baskets can be classified. Individual transparent inner door, effectively reduce cool air loss when opening the door. ADVANTAGE: Multiple sensors design: make sure the precise monitoring and programming. Double layer transparent glass door, easy to observe, also keep a better cooling temperature. Forced air refrigeration system, ensure inner temperature constant and uniform. Adjustable shelves, improve space utilization; blood storage baskets can be classified. Individual transparent inner door, effectively reduce cool air loss when opening the door. Capacity: 120L Temp. Range: 4 ï1 deg C Temp. Accuracy: 0.1 deg C Control System: Microprocessor control Display: LED display/LCD display Alarm: Audio and visual alarm for: High or low temperature, Sensor failure, System failure; Door alarm; Power failure, Low battery alarm for LMR-4V120/210; Battery off alarm for LMR-4V160/250/310 Refrigeration Type: Forced air refrigeration system Refrigerant: R134a, CFC-Free Compressor: International famous compressor Condenser & Evaporator: High efficiency air-cooled condenser, made of copper Defrost: Auto defrost Construction: Unibody Design, Mono-assembly foaming (Rigid polyurethane insulation material) Internal Material: Stainless steel External Material: Cold-rolled steel with anti-bacteria powder coating Door: Double layer transparent glass door with lock, Heating film preventing frosting, Sealing joint strip with magnetic force. Transparent plastic inner door. Consumption: 160W

Send Inquiry
Request To Call Back
Product Image (SCIENCE AND MATH CURIOSITY PROGRAMME)

SCIENCE AND MATH CURIOSITY PROGRAMME

Price: 20000.0 INR/Unit
Send Inquiry
Request To Call Back
Product Image (MPH-EE-80A)

AUDIO FREQUENCY FUNCTION GENERATOR 1HZ TO 200KHZ WITH DIGITAL FREQUENCY COUNTER

Audio Frequency Function Generator 1Hz to 200KHz with Digital Frequency Counter Built in high grade plastic cabinet, Useful to do experiments of amplifiers & oscillators, IC based circuit with high quality output.

Send Inquiry
Request To Call Back
Product Image (MTK-3025)

FUNCTION GENERATOR 2HZ~2MHZ WITH FREQUENCY COUNTER

Function Generator 2Hz2MHz with Frequency Counter A versatile bench/portable frequency meter to be used for general-purpose measurements. It should function as a Universal counter for frequency, period, totalize self-calibrate. Power Source: Electric Voltage: 220240 V/AC Time Base Stability: +5 x 10-6/d. Application: Laboratory Frequency: 50 Hz/60 Hz

Send Inquiry
Request To Call Back
Product Image (MTK-3025AG)

FUNCTION GENERATOR 0.1HZ~3MHZ WITH FREQUENCY COUNTER

Function Generator 0.1Hz3MHz with Frequency Counter A versatile bench/portable frequency meter to be used for general-purpose measurements. It should function as a Universal counter for frequency, period, totalize self-calibrate. Power Source: Electric Voltage: 220240 V/AC Time Base Stability: +5 x 10-6/d. Application: Laboratory Frequency: 50 Hz/60 Hz

Send Inquiry
Request To Call Back
Product Image (MTK-3025BG)

FUNCTION GENERATOR 0.1HZ~5MHZ WITH FREQUENCY COUNTER

Function Generator 0.1Hz5MHz with Frequency Counter A versatile bench/portable frequency meter to be used for general-purpose measurements. It should function as a Universal counter for frequency, period, totalize self-calibrate. Power Source: Electric Voltage: 220240 V/AC Time Base Stability: +5 x 10-6/d. Application: Laboratory Frequency: 50 Hz/60 Hz

Send Inquiry
Request To Call Back
Product Image (MT-549A)

FUNCTION SIGNAL GENERATOR 2 MHZ WITH AMPLITUDE & FREQUENCY DISPLAY

Function Signal Generator 2 MHz with Amplitude & Frequency Display The Digital Function Signal Generator is an instrument use for testing instrument accurately. This unit is capable of producing output 7 frequency ranges from0.2Hz to 2MHz in Sine, Square, Rectangle, and Saw tooth and triangle waveforms. It is designed with large scale integrated circuit that ensures high reliability and high stability. This high quality unit is perfect for the engineer or student for uses in an electronic lab, production line or teaching environment all for a very reasonable cost. Features: Convenient and safe to operate with high intelligence for using the single microprocessor to control running and displaying Frequency and amplitude displayed simultaneously and adjustable Output wave-form such as sine, square, rectangle, saw tooth and triangle wave Frequency Range from 0.2Hz to 2MHz

Send Inquiry
Request To Call Back
Product Image (MTK-6857AL)

VCR 1 CYLINDER FOUR STROKE PETROL ENGINE TEST RIG WITH ROPE BRAKE/ELECTRICAL BRAKE/HYDRAULIC BRAKE/AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER

VCR 1 CYLINDER FOUR STROKE PETROL ENGINE TEST RIG WITH ROPE BRAKE/ELECTRICAL BRAKE/HYDRAULIC BRAKE/AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER/ COMPUTERIZED VCR 1 CYLINDER FOUR STROKE PETROL ENGINE TEST RIG. IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine. It consists of an IC Engine, dynamometer, fuel measuring, air intake measuring and various other arrangements.

Send Inquiry
Request To Call Back
Product Image (MTK-6858AL)

1 CYLINDER FOUR STROKE WATER COOLED DIESEL ENGINE TEST RIG WITH ROPE BRAKE/ELECTRICAL BRAKE/HYDRAULIC BRAKE/AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER

1 CYLINDER FOUR STROKE WATER COOLED DIESEL ENGINE TEST RIG WITH ROPE BRAKE/ELECTRICAL BRAKE/HYDRAULIC BRAKE/AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER/ COMPUTERIZED 1 CYLINDER FOUR STROKE WATER COOLED DIESEL ENGINE TEST RIG.

Send Inquiry
Request To Call Back
Product Image (MPH-EE-80F)

FUNCTION GENERATOR 0.1HZ~10MHZ WITH AM/FM & FREQUENCY COUNTER

Function Generator 0.1Hz10MHz with AM/FM & Frequency Counter Built in high grade plastic cabinet, Useful to do experiments of amplifiers & oscillators, IC based circuit with high quality output.

Send Inquiry
Request To Call Back
Product Image (MTK-6859AL)

TWIN CYLINDER FOUR STROKE WATER COOLED DIESEL ENGINE TEST RIG WITH ROPE BRAKE/ELECTRICAL BRAKE/HYDRAULIC BRAKE/AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER

TWIN CYLINDER FOUR STROKE WATER COOLED DIESEL ENGINE TEST RIG WITH ROPE BRAKE/ELECTRICAL BRAKE/HYDRAULIC BRAKE/AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER/ COMPUTERIZED TWIN CYLINDER FOUR STROKE WATER COOLED DIESEL ENGINE TEST RIG. IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine. It consists of an IC Engine, dynamometer, fuel measuring, air intake measuring and various other arrangements.

Send Inquiry
Request To Call Back
Product Image (MPH-EE-80G)

FUNCTION GENERATOR 0.1HZ~10MHZ

Function Generator 0.1Hz10MHz Built in high grade plastic cabinet, Useful to do experiments of amplifiers & oscillators, IC based circuit with high quality output.

Send Inquiry
Request To Call Back
Product Image (MTK-6860AL)

4 CYLINDER FOUR STROKE DIESEL ENGINE TEST RIG WITH ROPE BRAKE/ELECTRICAL BRAKE/HYDRAULIC BRAKE/AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER

4 CYLINDER FOUR STROKE DIESEL ENGINE TEST RIG WITH ROPE BRAKE/ELECTRICAL BRAKE/HYDRAULIC BRAKE/AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER/ COMPUTERIZED 4 CYLINDER FOUR STROKE DIESEL ENGINE TEST RIG. IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine. It consists of an IC Engine, dynamometer, fuel measuring, air intake measuring and various other arrangements.

Send Inquiry
Request To Call Back
Product Image (MTK-3028A)

DDS FUNCTION GENERATOR 10 MHZ WITH ARBITRARY WAVEFORM

DDS Function Generator 10 Mhz with Arbitrary waveform Multi waveform: Sine, Triangle, Square, Ramp, Pulse and etc. DC Off set and Symmetry continuously adjustable VCF input Built-in 6 digits counter up to 15MHz equal accuracy Full output protection Economical type, low cost Specifications Function Generator Main output Waveforms Sine, Square, Triangle, Ramp, Pulse and etc., Impedance 50 ±10% Amplitude 20Vp-p (1M load); 10vpp (50 load) Attenuation 0/20/40/60db Distortion factor20 Hz "20 KHZ 1% Square wave, Rise or fall time 30 ns Power source 220-240VAC ±10%. 60Hz/50Hz

Send Inquiry
Request To Call Back
Product Image (MTK-3028AB)

DDS FUNCTION GENERATOR 25 MHZ WITH ARBITRARY WAVEFORM

DDS Function Generator 25 Mhz with Arbitrary waveform Multi waveform: Sine, Triangle, Square, Ramp, Pulse and etc. DC Off set and Symmetry continuously adjustable VCF input Built-in 6 digits counter up to 15MHz equal accuracy Full output protection Economical type, low cost Specifications Function Generator Main output Waveforms Sine, Square, Triangle, Ramp, Pulse and etc., Impedance 50 ±10% Amplitude 20Vp-p (1M load); 10vpp (50 load) Attenuation 0/20/40/60db Distortion factor20 Hz "20 KHZ 1% Square wave, Rise or fall time 30 ns Power source 220-240VAC ±10%. 60Hz/50Hz

Send Inquiry
Request To Call Back
Product Image (MTK-6861AL)

VCR 1 CYLINDER FOUR STROKE DIESEL ENGINE TEST RIG WITH ROPE BRAKE/ELECTRICAL BRAKE/HYDRAULIC BRAKE/AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER

VCR 1 CYLINDER FOUR STROKE DIESEL ENGINE TEST RIG WITH ROPE BRAKE/ELECTRICAL BRAKE/HYDRAULIC BRAKE/AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER/ COMPUTERIZED VCR 1 CYLINDER FOUR STROKE DIESEL ENGINE TEST RIG. IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine. It consists of an IC Engine, dynamometer, fuel measuring, air intake measuring and various other arrangements.

Send Inquiry
Request To Call Back
Product Image (MTK-3029RF)

ANALOG RF SIGNAL GENERATOR 100KHZ~150MHZ

Analog RF Signal Generator 100KHz150MHz Features: With 1 KHz oscillator in inner part for the purpose of modulation. Of portable type, high stability SALIENT FEATURES: Front panel built with High Quality Multi Color Sticker. Fuse for Short Circuit protection Instruction manual. Connections are brought out through 4mm Colored Terminals and BNC Socket. The trainer is housed in Metal cabinet. Power requirement: AC 115 / 230V, 50 / 60Hz Approx. 3VA.

Send Inquiry
Request To Call Back
Product Image (MTK-6862AL)

1 CYLINDER FOUR STROKE DUAL FUEL ENGINE TEST RIG WITH ROPE BRAKE/ELECTRICAL BRAKE/HYDRAULIC BRAKE/AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER

1 CYLINDER FOUR STROKE DUAL FUEL ENGINE TEST RIG WITH ROPE BRAKE/ELECTRICAL BRAKE/HYDRAULIC BRAKE/AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER/ COMPUTERIZED 1 CYLINDER FOUR STROKE DUAL FUEL ENGINE TEST RIG. The setup consists of single cylinder, four stroke engine connected to dynamometer for loading. It is provided with necessary instruments for combustion pressure and crank angle measurements. These signals are interfaced to computer through engine indicator for P?-PV diagrams. Provision is also made for interfacing airflow, fuel flow, temperatures and load measurement. The setup has standalone panel box consisting of air box, fuel tank, manometer, fuel measuring unit, transmitters for air and fuel flow measurements, process indicator and engine indicator. Rotameters are provided for cooling water and calorimeter water flow measurement.

Send Inquiry
Request To Call Back
Product Image (MTK-6863AL)

VCR 1 CYLINDER FOUR STROKE DUAL FUEL ENGINE TEST RIG WITH ROPE BRAKE/ELECTRICAL BRAKE/HYDRAULIC BRAKE/AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER

VCR 1 CYLINDER FOUR STROKE DUAL FUEL ENGINE TEST RIG WITH ROPE BRAKE/ELECTRICAL BRAKE/HYDRAULIC BRAKE/AIR COOLED EDDY CURRENT/WATER COOLED EDDY CURRENT DYNAMOMETER/ COMPUTERIZED VCR 1 CYLINDER FOUR STROKE DUAL FUEL ENGINE TEST RIG. The setup consists of single cylinder, four stroke engine connected to dynamometer for loading. It is provided with necessary instruments for combustion pressure and crank angle measurements. These signals are interfaced to computer through engine indicator for P?-PV diagrams. Provision is also made for interfacing airflow, fuel flow, temperatures and load measurement. The setup has standalone panel box consisting of air box, fuel tank, manometer, fuel measuring unit, transmitters for air and fuel flow measurements, process indicator and engine indicator. Rotameters are provided for cooling water and calorimeter water flow measurement.

Send Inquiry
Request To Call Back
Product Image (MT-80042)

8 DIGIT FREQUENCY COUNTER 10HZ~2.4 GHZ

8 Digit Frequency Counter 10Hz2.4 GHz Temp coeff 0.3ppm over 18-28 deg C. Input 30 Vdc. Power supply 9V.

Send Inquiry
Request To Call Back
Product Image (MTK-6869AL)

CUT SECTIONAL MODEL OF ACTUAL 1 CYLINDER 2 STROKE PETROL ENGINE

CUT SECTIONAL MODEL OF ACTUAL 1 CYLINDER 2 STROKE PETROL ENGINE/ CUT SECTIONAL MODEL OF ACTUAL 1 CYLINDER 4 STROKE PETROL ENGINE/CUT SECTIONAL MODEL OF ACTUAL 3 OR 4CYLINDER 4 STROKE PETROL ENGINE/CUT SECTIONAL MODEL OF ACTUAL 1 CYLINDER 4 STROKE DIESEL ENGINE/CUT SECTIONAL MODEL OF ACTUAL 4 CYLINDER 4 STROKE DIESEL ENGINE Cut Sectional Model Of Actual Single Cylinder Two Stroke Petrol Engine apparatus With Carburetor, spark plug etc. Complete with all salient parts sectioned for study of the various components and their function and to plot port-timing diagram on the single cylinder two-stroke petrol engine.

Send Inquiry
Request To Call Back
Product Image (MT-549R)

DIGITAL RF SIGNAL GENERATOR 100KHZ~150MHZ WITH FREQUENCY COUNTER

Digital RF Signal Generator 100KHz150MHz with Frequency Counter Features: Wide frequency range: 100 KHz 150MHz. With 1 KHz oscillator in inner part for the purpose of modulation. Of portable type, high stability SALIENT FEATURES: Front panel built with High Quality Multi Color Sticker. Fuse for Short Circuit protection Instruction manual. Connections are brought out through 4mm Colored Terminals and BNC Socket. The trainer is housed in Metal cabinet. Power requirement: AC 115 / 230V, 50 / 60Hz Approx. 3VA.

Send Inquiry
Request To Call Back
Product Image (MTS-212WB)

WORK BENCH ELECTRONICS WITH INSTRUMENTS.

Work Bench Electronics With Instruments Dual DC regulated power supply 30-0-30 V, 2 Amps , DC regulated variable power supply 0-24 V, 1Amp , CRO Dual Trace 20 MHz (component testing facilities) Battery Charger , Dimmer start 3 Amp

Send Inquiry
Request To Call Back
Product Image (MTS-212WBB)

WORK BENCH ELECTRICAL WITH INSTRUMENTS

Work Bench Electrical With Instruments Oscilloscope 30MHz with Frequency Counter, Function Genertor 5Mhz, DC Power Supply 220V/2Amp, AC/DC Power Supply 0-30V/2Amp Multimeter, LCR Meter, Soldring & De - Soldring Station, Isolation Transformer 1KVA/230VAC

Send Inquiry
Request To Call Back
Product Image (MTK-733B)

LCR Q METER (BRIDGE TYPE) ANALOG BENCH TYPE

LCR Q Meter (Bridge Type) Analog Bench Type Usage/Application: Laboratory Power Source: 220VAC Material: Metal Brand Teknik

Send Inquiry
Request To Call Back
Product Image (MTK-733)

LCR Q METER - DIGITAL (DIRECT Q MEASUREMENT) BENCH TYPE

LCR Q Meter - Digital (Direct Q Measurement) Bench Type LCR-Q METER Variable Measured: L, C, R, Q & D. Measurement: Series or parallel equivalent. Modes Sort Modes: Absolute value or nominal value with % tolerance. Measurement Freq.: User selectable 100Hz or 1KHz. Accuracy of Mea- : ±0.25% of nominal. Frequency Maximum Voltage: 0.285V RMS (0.8V p-p) approx. Across Measuring Update: 2 per second. Rate Maximum Time for: 1 second. Display: 4 digit 7 segment 12.5mm high, bright LED with automatic decimal point. Component under Test Measurement Ranges Inductance: 0.1µH to 9999H. Capacitance: 0.3pF to 9999µF. Resistance: 0.001 ohm to 100M ohm. Basic Accuracy: ±0.25% of reading ±1 digit. Valid for L, C & R

Send Inquiry
Request To Call Back
Product Image (MTS-21015)

UNIVERSAL IC TESTER

Universal IC Tester Universal IC Tester Micro Teknik is manufacture, exporters & suppliers Features Tests a wide range of Digital ICs such as 74 Series, 40/45 Series of CMOS ICžs. It can test Microprocessor It tests Peripherals like It tests a wide range of Analog Icžs such as ADC, DAC, Opamp, 555, Transistor Arrays, Analog Switches, Waveform Generator, Line Drivers, Voltages Regulators, PLLžs, VCO, PWM Generator, Sample &Hold, Voltages References, Opto couplers, Comparators, Voltages Followers and Others. It tests Seven segment display of common cathode &common anode type It has Auto search facility for Digital ICžs. Test by: Truth table / sequence table comparison. Analog ICžs. Keys: 50 cherry keys Key pad with numerical & functional keys. Display: 16x2 Backlit LCD Display.

Send Inquiry
Request To Call Back
Product Image (MTS-21015D)

DIGITAL IC TESTER

Digital IC Tester Universal IC Tester Micro Teknik is manufacture, exporters & suppliers Features Tests a wide range of Digital ICs such as 74 Series, 40/45 Series of CMOS ICžs. It can test Microprocessor It tests Peripherals like It tests a wide range of Analog Icžs such as ADC, DAC, Opamp, 555, Transistor Arrays, Analog Switches, Waveform Generator, Line Drivers, Voltages Regulators, PLLžs, VCO, PWM Generator, Sample &Hold, Voltages References, Opto couplers, Comparators, Voltages Followers and Others. It tests Seven segment display of common cathode &common anode type It has Auto search facility for Digital ICžs. Test by: Truth table / sequence table comparison. Analog ICžs. Keys: 50 cherry keys Key pad with numerical & functional keys. Display: 16x2 Backlit LCD Display.

Send Inquiry
Request To Call Back
Product Image (MTS-21014)

ANALOG IC TESTER

Analog IC Tester Universal IC Tester Micro Teknik is manufacture, exporters & suppliers Features Tests a wide range of Digital ICs such as 74 Series, 40/45 Series of CMOS ICžs. It tests Peripherals like It tests a wide range of Analog Icžs such as ADC, DAC, Opamp, 555, Transistor Arrays, Analog Switches, Waveform Generator, Line Drivers, Voltages Regulators, PLLžs, VCO, PWM Generator, Sample &Hold, Voltages References, Opto couplers, Comparators, Voltages Followers and Others. Test by: Truth table / sequence table comparison. Analog ICžs. Keys: 50 cherry keys Key pad with numerical & functional keys.

Send Inquiry
Request To Call Back
Product Image (MT-553AM)

ANALOG MULTIMETER

Analog Multimeter Analog Multi meter is fully featured and can be used to measure AC/DC voltage and DC current, resistance, as well as continuity buzzer. It also has a built-in 1.5V and 9V Battery tester with a 100mA/10mA load respectively. One thing unique about this meter is it comes with two Null Measurement position, so you can read the movement of the needle.

Send Inquiry
Request To Call Back
Product Image (MTS-101422)

LIQUID- LIQUID EXTRACTION IN A PACKED TOWER APPARATUS

LIQUID- LIQUID EXTRACTION IN A PACKED TOWER APPARATUS Micro Teknik has designed this setup for demonstrating principles of liquid-liquid extraction and mass transfer operation in a packed column. This set up comprises the following: Glass column Packing Feed tanks Air regulator with pressure gauge Receiving tanks Piping Rotameter for flow measurement Experiments Determination of overall height of a transfer unit and overall volumetric mass transfer coefficient Features: SS tanks and wetted parts Simple operation & maintenance Compact & standalone set up Special arrangement for changing height of interface zone Continuous operation Painted structure Utilities Required Electric supply: 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing 5A, three pin socket with switch for Compressor Water supply & drain Chemicals for trial Compressed air supply: Clean, oil and moisture free air, pressure 2 Bar

Send Inquiry
Request To Call Back
Product Image (MTK-728)

3 1/2DIGIT DIGITAL MULTIMETER (MANUAL RANGE)

3 1/2Digit Digital Multimeter (Manual Range) DC Voltage: 200mV-1000Vtd> AC Voltage: 200V-750V Current:2000uA-10A Frequency: Square Wave-50kHz Resistance: 0 Ohms to 2000K Weight : 300 grams

Send Inquiry
Request To Call Back
Product Image (MTS-101423)

YORK SCHEIBEL EXTRACTION UNIT APPARATUS

The setup is designed to demonstrate principles of extraction and mass transfer operation in a YORK SCHEIBELS column. The set up consists of a glass column, feed tanks, and air regulator with pressure gauge, receiving tanks and piping. Rotameter are provided for flow measurement. The glass column is divided into multiple stages; each stage consists of a woven wire mesh (calming) section and a mechanical agitation section. The agitator speed can be varied by drive. The presence of alternatively agitating and calming sections yield higher extraction efficiency than conventional packed column Experiments Determination of overall height of a transfer unit and overall volumetric mass transfer coefficient Features Stainless Steel tanks and wetted parts Special arrangement for changing height of interface zone Continuous operation Superb Painted structure Simple to operate & maintain Compact & standalone set up Utilities Required Electric supply Provide 230 /- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for Compressor Chemicals for trial as per your choice Compressed Air supply: Clean, oil and moisture free air, pressure 2 Bar. Water Supply & Drain as required

Send Inquiry
Request To Call Back
Product Image (MTK-728B)

3 3/4 DIGIT DIGITAL MULTIMETER WITH FREQUENCY COUNTER OF 30 MHZ(AUTO RANGE)

3 3/4 Digit Digital Multimeter with Frequency Counter of 30 MHz(Auto Range) DC Voltage: 200mV-1000Vtd> AC Voltage: 200V-750V Current:2000uA-10A Frequency: Square Wave-50kHz Resistance: 0 Ohms to 2000K Weight : 300 grams

Send Inquiry
Request To Call Back
Product Image (MTAT-07)

JAW CRUSHER APPARATUS

It may be defined as the Useful to crush chemical lumps, minerals, aggregate, rock etc. to fine powders a crusher has manganese steel jaws. The crusher is made of steel. The jaws have forward and downward strokes with sufficient rocking action to throw the crusher material down the jaws. A hopper is provided at the top for pouring material. Features:- Easy maintenance Light weight Fine finish Rust free material Friction free operation Highly efficient Simple structure, easy maintenance; Stable performance, high capacity; Even final particles and high crushing ratio; Adopt advanced manufacturing technique and high-end materials Flywheel Frame They can be removed from the frame when the bearing is damaged it can be replaced by the backup device on the spot the steel casting movable jaw can support the movable jaw plate after the surface treatment Bearing Eccentric shaft The wedge block system is convenient to replace Protecting plate Jaw plate The adjustment of shim is sample convenient reliable and the closed side is easy to adjust The high quality steel adjusting seat has long duration Key less connection design Spring rod Iron cast board which increases the insurance factor when materials which cannot be crushed easily enter into the crusher it can protect the components of the machine Stable radio plate stroke

Send Inquiry
Request To Call Back
Product Image (MTS-101424)

SPRAY TOWER APPARATUS

The setup is designed to demonstrate principles of spray extraction and mass transfer operation in a column. The set up consists of a glass column, feed tanks, air regulator with pressure gauge, receiving trays and piping. Rotameter are provided for flow measurement Experiments Determination of overall height of a transfer unit and overall volumetric mass transfer coefficient Features Stainless Steel tanks and wetted parts Special arrangement for changing height of interface zone Continuous operation Superb Painted structure Simple to operate & maintain Compact & standalone set up Utilities Required Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for Compressor Chemicals for trial as per your choice Compressed Air supply: Clean, oil and moisture free air, pressure 2 Bar. Water Supply & Drain as required

Send Inquiry
Request To Call Back
Product Image (MTK-728C)

4 1/2 DIGITAL MULTIMETER BENCH TYPE (MANUAL RANGE)

4 1/2 Digital Multimeter Bench Type (Manual Range) With basic DCV, ACV, DCA, ACA, Î, CAP, Hz, hFE, Diode and Continuity measuring functions Voltage range up to 1000V DC or peak-peak value AC, resolution up to 10uV Current range up to 20A, auto polarity shift, data hold AC measuring adopts highly accurate true RMS measurement, with frequency bandwidth and AC+DC measuring, capable of accurate true RMS measuring of any waveforms in AC range

Send Inquiry
Request To Call Back
Product Image (MTCP-22)

3 3/4 DIGITAL CLAMP METER (AUTO RANGE)

3 3/4 Digital Clamp Meter (Auto Range) DC voltage 1000V, AC 600 V, AC current 200-600A NO buzzer off and diode test function. Power:2x1.5VAAA (Not Included) Product type: Multi meters 3 1/2 digits LCD, with a max. reading of 1999 DC Voltage:600V,(0.8%+3dgt) Resistance:2K-200K-2M,(1.0%+3dgt) Fire wire test function Material: Plastic, Electronic Parts Max display:1999

Send Inquiry
Request To Call Back
Product Image (MTS-101426)

BUBBLE CAP DISTILLATION COLUMN APPARATUS

Micro Teknik The column is made of Stainless Steel with seven plates for mounting the bubble caps. Each plate is provided with one bubble cap. An electrically heated re-boiler is installed at the bottom of the column. The vapors form the top of column are condensed in the shell and tube type condenser by circulating cooling water supplied by laboratory overhead tank. The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation is done for pressure & temp measurement wherever is necessary

Send Inquiry
Request To Call Back
Product Image (MTK-0010CS)

CYCLONE SEPARATION APPARATUS

A Cyclone Separator is a vertical cylinder with the inlet stream introduced tangentially near the top, giving the suspension a spinning rotation in the cylinder. The centrifugal force acting on the particles tends to throw them radically to the sides of the cylinder as they spiral downward to a conical bottom where they are removed. A collector is fitted at the bottom & the induced draft blower is used to create the air stream. The classified air leaves the cyclone through a pipe extended down into the cyclone & passes through blower delivery side fitted with fine screen cloth bag to avoid dust expansion in the laboratory. The setup consists of I.D. blower connected to discharge side of Cyclone Separator. A flow meter with manometer is provided to measure the flow rate of air. Pressure drop in the Cyclone is measured by water manometer. Solids are collected in the collector fixed at the bottom. The set-up is complete with flow Control & by-pass valve. Product Specification Material: Stainless Steel Filter Surface Area (m2): Area 2 m x 1 m. Voltage (V): 220v Dimension (L x B x H): 100mm Usage Application: lab experiment Color: blue

Send Inquiry
Request To Call Back
Product Image (MTK-100GT)

CENTRIFUGAL BLOWER TEST RIG

This equipment comprises of a Centrifugal Blower coupled to a Motor. Three interchangeable impellers with forward, backward and radial vanes are provided with the test rig. A Pitot tube is provided in the delivery line of blower for static Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Blower. Product Specification Usage/Application: Laboratory Equipment Variable Speed: Dc Motor with Thyristor Controlled Dc Drive Blower: Centrifugal, Forced Draft Type Impeller (3 Nos.): Forward Curved, Backward Curved & Radial Curved Pilot Tube (With Manometer): For Static, Dynamic & Differential Pressure Measurement Stop Watch: Electronic Energy Measurement: Electronic Energy Meter, L&t Make

Send Inquiry
Request To Call Back
Product Image (JP-5)

Tissue Processor

Price: 88900 INR/Unit

Specification: ï· Automatic Tissue Processor is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: ï· 1 “ S.S. Basket rotor ï· 1 “ Tissue basket12 “ S.S. Tissue capsules ï· 10 “ 1 litre glass beakers ï· 11 “ beaker covers ï· 2 “ S.S. Wax baths each fitted with thermostat, 5-24 hrs ï· Calibrated timing discs ï· One-notch plier for programming time discs ï· It works suitably on 220V ac 50Hz single phase

Send Inquiry
Request To Call Back
Product Image (MTK-016HK)

RECIPROCATING PUMP TEST RIG

The present Reciprocating Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Double acting, Single Cylinder Reciprocating Pump coupled with an AC Motor. Flow of water is measured by using measuring tank and stopwatch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure the pressure. Experimentation: To determine the characteristics of reciprocating pump and to find out total head, pump efficiency, overall efficiency & volume metric efficiency. To plot the graph Head Vs Discharge Discharge Vs Pump efficiency

Send Inquiry
Request To Call Back
Product Image (JP-5)

Teknik Automatic Tissue Processor

Automatic Tissue Processor is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 -S.S. Basket rotor 1-Tissue basket12-S.S. Tissue capsules 10-1 litre glass beakers 11-beaker covers 2-S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Send Inquiry
Request To Call Back
Product Image (MTS-101427)

SIEVE PLATE DISTILLATION COLUMN APPARATUS

Having extensive knowledge and rich understanding of the market, we are able to manufacture and export a premium range of Sieve Plate Distillation Column. Made and designed using quality stainless steel with seven sieve trays, these columns are used for demonstrating the principles of distillation in a sieve plate. Our Sieve Plate Distillation Column is best known for numerous quality features such as simple operation, less maintenance and compact design. We adhere to the parameters of the national and international quality standards to provide the clients with utmost satisfaction in terms of quality. Features: Ruggedness Lightweight Longer service life Further Details: The setup is designed to demonstrate principles of distillation in a Sieve Plate Column. The column is made of Stainless Steel material with seven sieve trays. An electrically heated re-boiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapors form the top of column are condensed in the shell and tube type condenser by circulating cooling water supplied by laboratory overhead tank. The condensate is divided into reflux & distillate and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation is done for pressure & temp. Measurement wherever is necessary. Experiments: To study the Sieve Plate Distillation Column Features: Stainless Steel tanks and wetted parts Superb Painted structure Simple to operate & maintain Compact & standalone set up Utilities Required: Water Supply 2 LPM at 5 m head Drain Electricity Supply: 1Phase, 220 V AC, 6.5 kW Required Chemicals Refractrometer for analysis Technical Details: Distillation Column Material Stainless Steel Dia 100 mm Packing Material Sieve plates seven nos. Rota meter For cooling water flow rate measurement. Re-boiler Made of Stainless Steel, provided with Pressure gauge (Bourdon type, 0-2kg/cm2) & Level Gauge. Safety valve & insulated with ceramic wool Condenser Shell & Tube Type made of Stainless Steel. Collection Tank Distillate & bottom product capacity 5 Ltrs. each Heaters Nichrome wire heater Piping PVC/SS, Temp. Sensors RTD PT-100 type, Control panel Digital Temp. Controller: 0-199.9degC, For Steam Re boiler Digital Temp. Indicator: 0-199.9degC. ,with multi-channel switch On/off switch, Mains Indicator etc. Optional Utility Extra Refractrometer

Send Inquiry
Request To Call Back
Product Image (MTK-4114E)

ELUTRIATOR APPARATUS

An Elutriator is vertical tube through which a fluid passes upwardly at a specific velocity while a solid mixture, whose separation is desired, is fed into the top of the column. The large particles, which settle at a velocity higher than that of the rising fluid, are collected at the bottom of the column, and the smaller particles are carried out of the top of the column with the fluid. Several columns of different diameters in series may be used to bring about a further separation. The set up consists of two vertical tubes of different diameter in which water is passed at a controlled velocity. A tank with pump is provided for re-cycled water supply and flow rate is measured by Rota meter and controlled with the help of control valve. Experimentation: To determine the velocity of water for the separation of equal sized particles of different densities. To determine the velocity of water for separating the given solid mixture of the same density on the basis of size. Utilities Required: Material for Feed. Water Supply and Drain. Electric Supply: Single phase, 220 V AC, 0.5 kW. Dryer. Weighing Balance. Floor Area 1.5 m x 1 m. Technical Details: Elutriator Tubes: Material Stainless Steel, 2 Nos. of Tubes of Length 500 mm each with successive Dia. 70mm, 96mm. Water Feed Tank: Material Stainless Steel, Capacity 60 Ltrs. Pump: FHP. Flow Measurement: Rota meter Solid Collectors (2 Nos.): Material PVC fixed to individual tube. Fine Dust Collector: Nylon cloth Collecting Tray (2 Nos.): Material Stainless Steel, suitable capacity. Control panel Comprises of: Standard make On/Off switch, Mains Indicator etc.

Send Inquiry
Request To Call Back
Product Image (MTS-17001)

MAGNETIC SEPARATOR APPARATUS

Drum-type magnetic separator for separation of magnet sable components from a solid compound Separation by a fixed permanent magnet in an area of a rotating, non-magnetic drum Feed hopper with vibrating trough for feed of solid compound to drum Dosage of feed material by way of distance of hopper outlet from vibrating trough, throw and frequency of vibrating trough Drum rotation speed adjustable by electric motor with potentiometer 2 steel tanks for separated fractions and 1 tank for solid compound Specification

Send Inquiry
Request To Call Back
Product Image (JP-5)

Fully Automatic Tissue Processor

Automatic Tissue Processor is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 -S.S. Basket rotor 1-Tissue basket12-S.S. Tissue capsules 10-1 litre glass beakers 11-beaker covers 2-S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Send Inquiry
Request To Call Back
Product Image (MTS-101429)

STEAM DISTILLATION COLUMN APPARATUS

The equipment consists of jacketed pressure vessel for distillation. Steam from a steam generator can either be allowed to enter in the outer jacket or in the vessel. The vapours form the top of the vessel are condensed in the shell and tube type condenser by circulating cooling water, supplied by laboratory overhead tank. The condensate is collected in a separating chamber. The set-up is fitted with steam trap, control valves, pressure gauge, temperature sensors and other instrumentations required. Steam distillation is used industrially to purify liquids, which are immiscible with water, and to remove bad odors from oils. When water is added to a high boiling liquid immiscible with it, the total pressure exerted by the mixture above the liquid surface will be the sum of the vapor pressures of the pure components and therefore the boiling point of the mixture will be less than that of water at the given temperature. Because of this, even high boiling liquids are made to boil at low temperature and their decomposition is avoided. The steam consumption for steam distillation process is normally high. Experimentation To study the characteristics of Steam Distillation. Efficiency of simple steam distillation set-up.

Send Inquiry
Request To Call Back
Product Image (MTK-1642GP)

GEAR PUMP TEST RIG

Being the leading names in the industry, we offer our clients an extensive range of Gear Pump Test Rig that is manufactured with utmost accuracy. The Gear Pump Test Rig consists of a gear pump driven by electric motor. Our entire product range is quality assured in nature. They are as per the set industrial standards and are delivered at most affordable rates. Features: High efficiency Optimal performance Sturdy construction

Send Inquiry
Request To Call Back
Product Image (MTS-101430)

ABSORPTION IN SIEVE PLATE COLUMN APPARATUS

The setup is designed to demonstrate principles of distillation in a Sieve Plate Column. The column is made of Stainless Steel material with seven sieve trays. An electrically heated re-boiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapors form the top of column are condensed in the shell and tube type condenser by circulating cooling water supplied by laboratory overhead tank. The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation is done for pressure & temp. Measurement wherever is necessary Experiments To study the Sieve Plate Distillation Column Features Stainless Steel tanks and wetted parts Superb Painted structure Simple to operate & maintain Compact & standalone set up Utilities Required Drain Electricity Supply: 1Phase, 220 V AC, 6.5 kW Required Chemicals Refractrometer for analysis

Send Inquiry
Request To Call Back
Product Image (MTK-9012PSP)

SERIES & PARALLEL CENTRIFUGAL PUMP TEST

Product Description The setup comprises of two centrifugal pumps assembly with interconnecting pipe works. It is installed with necessary pressure gauges and flowmeter for pump performance study. This unit is mounted on a support plate which can be used in a stand-alone operation. The apparatus aims to study the operating behavior of centrifugal pumps as a single pump; in series condition; in parallel condition; capture various pump characteristic curves and pump efficiencies Specifications: Pump (2 units) Type: Centrifugal Pump; Max head: 21 meters of Water; Max flow: 90 LPM Reservior Tank: Cylindrical, transparent tank; Volume: 20 L Pressure gauge: Delivery side: 0 to 7 bar; Suction side: 0-760 mm of Hg Flow Rotameter Size: 1 Range : 0 to 150 LPM Digital Energy meter to measure input power Digital RPM Indicator Variable Frequency Drive Emergency Switch Detailed technical manual

Send Inquiry
Request To Call Back
Product Image (MTK-6896FC)

FROTH FLOATING CELL APPARATUS

Mixed liberated particles can be separated from each other by floatation if there is sufficient difference in their wet-ability. The floatation process operates by preparing a water suspension of a mixture of relatively finely sized solids. This is usually done in an agitated chamber open at the top. Fine bubbles of air are then dispersed through the agitated suspension to form a froth that rises to the top of the chamber. Particles that are radially wetted by water (hydrophilic) tend to remain in the water suspension. Those particles that are not easily wetted (hydrophobic) tend to be collected at the air bubble-water interface and rise to the surface attached to air bubbles. Thus differences in the surface chemical properties of the solids are the basis for separation. The set up consists of a agitated chamber open at the top. In the chamber, an impeller coupled to a shaft is fixed in a stationary diffuser. Low-pressure air is allowed to enter in the stationary diffuser through the air passage provided with the agitator. The collector coated mineral particles adhere to the rising bubbles and are carried to the top of the cell to be removed in the froth product. Product Specification Material: Mild Steel Coating: Powder Coating Motor Power: 1 HP Voltage: 220 V-320V Frequency: 50Hz

Send Inquiry
Request To Call Back
Product Image (JP-5)

Automatic Tissue Processor 1 Liter

Automatic Tissue Processor is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 -S.S. Basket rotor 1-Tissue basket12-S.S. Tissue capsules 10-1 litre glass beakers 11-beaker covers 2-S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Send Inquiry
Request To Call Back
Product Image (JP-5)

Automatic Teknik Tissue Processor

Automatic Tissue Processor is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 -S.S. Basket rotor 1-Tissue basket12-S.S. Tissue capsules 10-1 litre glass beakers 11-beaker covers 2-S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Send Inquiry
Request To Call Back
Product Image (MTK-6891CC)

CONE CLASSIFIER APPARATUS

Description: Cone types Classifiers are one of the oldest types. The conical vessel has angle of 60. The feed is fed from the top. Water is passed at a controlled velocity. The coarse solids travel down the sides and can be removed from the bottom. Fine particles are separated by over flow. Bottom product tank is provided with the setup. Experimentation: To determine the separation efficiency of given Classifier. To determine the effect of velocity on separation efficiency. Product Specification Material: METEL Type of Machine: CONE TYPE CLASSIFIER Type: CONE TYPE CLASSIFIER Voltage: 220 Volt (v) Country of Origin: Made in India

Send Inquiry
Request To Call Back
Product Image (MTS-101431)

ABSORPTION IN PACKED BED APPARATUS

Micro Teknik We are offering superior quality Adsorption in Packed Bed to the esteemed customers, as per their specific demands. These are designed under the strict command of our quality analyzers keeping in mind the industry guidelines. We make sure to timely deliver the ordered products at the customers end, via our wide distribution network. Utilities Required: Water Supply & Drain Electricity Supply: I Phase, 220VAC, 1.5kW Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted Specifications: Product: Adsorption Setup Reactor Column: Material Borosil Glass, different diameter with different height of packing (3 Nos.) Feed Tank: Material Stainless Steel, Capacity 20 Ltrs., feed lines, drain valve etc. (1Nos.) Receiving Tank: Material Stainless Steel, Capacity 20 Ltrs (1Nos.) Feed Circulation: By pump, Magnetic drive made of Polypropylene (1Nos.) Flow Measurement: Rota-meter 1 Nos. (For feed) Feed Piping: PVC / SS size Stop Watch: Electronic Control Panel: On off switch, Mains Indicator etc.

Send Inquiry
Request To Call Back
Product Image (MTK-7458JP)

JET PUMP TEST RIG

Jet Pump Test Rigs setup is designed to study the performance of jet pump. Set up consists of a Mono-Block jet pump coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop oil circulation. Pressure and Vacuum gauges are connected on delivery and suction side of pump for the purpose of measurement. The flow rate of water is measured using measuring tank and stop watch provided. Product Specification Power Source: Electric Voltage Supply: 230 V A.C. Water supply: Tap water connection

Send Inquiry
Request To Call Back
Product Image (MTS-101432)

ABSORPTION IN WETTED WALL COLUMN APPARATUS

Heat and mass transfer during the process in a wetted wall column can be demonstrated and studied by this set-up. The major parts of this set-up comprises: Glass column Feed tank Air regulator with pressure gauge Rotameter Receiving tray and piping Disturbance in metered quantity of fluid and walls of column occurs from the top, as metered hot air flow is passed through the wetted wall column vertically upwards and evaporation in the liquid film around the wall occurs. Different conditions can be stimulated by varied flow rates of water and air. Experiments Determination of the gas film coefficient in a wetted wall column making use of air water system. Finding the mass transfer coefficient Features Well Painted structure Simple operation and maintenance Compact and standalone set-up Utilities needed Water supply and drain 1Phase, 220 V AC, 0.5 kW is electricity supply

Send Inquiry
Request To Call Back
Product Image (MTK-6842T)

THICKENER APPARATUS

Industrial sedimentation operations may be carried out batch wise and continuously in equipment called thickener. The equipment is a cylindrical tank with openings for a slurry feed and product draw off. The tank is filled with dilute slurry and slurry is permitted to settle. Continuous thickeners are large diameter, shallow depth tanks with slowly revolving rakes for removing the sludge. The slurry is fed at the center of the tank. Around the top edge of the tank is a clear liquid overflow. The rake serves to scrap the sludge towards the center of the bottom for discharge. The motion of the rake also stirs only the sludge layer. This gentle stirring aids in water removal from the sludge. The set-up consists of several basic components: a tank to contain the slurry, feed piping and a feed well to allow the feed stream to enter the tank, a rotating rack mechanism to assist in moving the concentrated solids to the withdrawal points, an underflow solids-withdrawal system and an overflow launder. A feed tank, feed pump, and feed tank agitator is provided. A bin for collecting concentrated material is also provided. Experimentation: To study the working of continuous type thickener. Utility Required Water Supply and Drain. Electric Supply: Single phase, 220 V AC, 1.5 kW. Floor Area 1 m x 1 m. Slurry (Paper pulp or CaCo3)

Send Inquiry
Request To Call Back
Product Image (JP-5)

Teknik Digital Tissue Processor

Automatic Tissue Processor is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 -S.S. Basket rotor 1-Tissue basket12-S.S. Tissue capsules 10-1 litre glass beakers 11-beaker covers 2-S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Send Inquiry
Request To Call Back
Product Image (MTS-101285)

PELTON WHEEL TURBINE TEST RIG

We are able to offer a wide range of Pelton Wheel Test Rig. It is manufactured using high grade raw material and innovative technology in compliance with globally accepted norms of quality. The offered range is widely acclaimed in the market, owing to its specific attributes like high efficiency and fine finishing. Our Clients can avail the pelton wheel test rig from us within stipulated time period. Features of Pelton Turbine Easy to functionality Sturdy construction Negligible maintenance Other Descriptions of Pelton Turbine The unit is designed to show students how an impulse turbine works and test its performance The turbine power is adjusted by means of the nozzle cross-section The experimental unit consists of the Pelton wheel, a needle nozzle used as control device (control flow rate), a rope brake dynamometer for loading the turbine and a housing with a transparent front panel The transparent cover enables you to observe the water flow, the wheel movement during operation The pressure at the turbine inlet is recorded with a pressure gauge A spring balance to measure brake power and a digital RPM indicator are attached to wheel shaft Thus, the mechanical power output of the turbine can be determined. Flow rate measurement are provided by orifice meter Specifications of Pelton Turbine Pelton Wheel: 300 mm Diameter with 18 Buckets Sump tank capacity: 200 liters High Grade Plastic Flow rate measurement: Orifice meter with Burdon type pressure gauge Pump: Monoblock type, 4 litre/sec, Head 20 mtrs; Motor 5 HP Piping with necessary Valves and Fittings Digital RPM Indicator Detailed Technical Manual and On-site Training

Send Inquiry
Request To Call Back
Product Image (JP-5)

Automatic Vacuum Tissue Processor

Automatic Tissue Processor is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 -S.S. Basket rotor 1-Tissue basket12-S.S. Tissue capsules 10-1 litre glass beakers 11-beaker covers 2-S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Send Inquiry
Request To Call Back
Product Image (MTK-6875WT)

WILFLEY TABLE APPARATUS

This Wilfley Table unit is driven by head motion with a stroke adjustment of between 8 mm and 16mm (nominal). Head motion is self-lubricating. Simple, robust design requires minimal maintenance. The deck is supported on sixteen carriers and is vibrated diagonally along the entire length. The deck is manufactured from high-quality timber, marine-grade plywood and covered with 5mm smooth rubber for maximum durability. (Black/white option). Specific riffle patterns can be fitted to maximize metallurgical performance (by particle size/application data). Table tilt can be easily adjusted using a hand wheel, even while the machine is in operation. Supplied on its own galvanized steel base. The unit fitted with a 1.5kW (2HP) motor. Wear-resistant polyurethane "fingers along the concentrate edge provide accurate cutting of concentrates. A wash-down hose and spray gun option.

Send Inquiry
Request To Call Back
Product Image (MTS-956FT)

FRANCIS TURBINE TEST RIG

Francis Turbine is a reaction turbine, which was developed by an English born American Engineer Sir J. B. Francis. The water enters the turbine through the outer periphery of the runner in the radial direction and leaves the runner in axial direction and hence it is called a mixed flow turbine. As the water flows to the runner, a part of pressure energy goes on changing into kinetic energy. Thus the water through the runner is under pressure. The runner is completely enclosed in an air tight casing and the casing & runner is always full of water. The present set-up consists of a runner. The water is fed to the turbine by means of Centrifugal Pump, radially to the runner. The runner is directly mounted on one end of a central SS shaft and other end is connected to a loading dynamometer arrangement. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the runner. This runner assembly is supported by thick cast iron pedestal. Load is applied to the turbine with the help of loading dynamometer arrangement so that the efficiency of the turbine can be calculated. A draught tube is fitted on the outlet of the turbine. The set-up is complete with guide mechanism. Pressure and Vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine. A venturi meter with differential pressure manometer is provided to measure the discharge of water through the nozzle of turbine. Product Specification Speed: 1500 RPM (Approx.) Output Power: 3 kW. Discharge: 2000 LPM (Approx.) Supply Head: 20 m (Approx.) Runner: Curved Vanes Type. Dynamometer: Rope Brake Drum type, Drum Dia 300 mm.

Send Inquiry
Request To Call Back
Product Image (MTS-101433)

VAPOUR IN AIR DIFFUSION APPARATUS

The setup comprises all needed accessories for determining the diffusion coefficient of vapors (liquid) in air phase. The diffusion vessel is of high quality Borosilicate Glass, along with a T type diffusion tube engraved in mm scale for level readings. The vessel is mounted over a Magnetic Stirrer cum hot plate, given with controls for vary the temperature and RPM for calculating the diffusion rate at different temperature. The Air Flow stream is created making use of mini-air pump. Diffusivity of the vapors is determined by WINKELMANN method, in which liquid evaporates in a graduated vertical glass tube over the top of which a stream of air is passed. Experiments Determining diffusion coefficient for liquid / vapor in air system Features Painted structure Simple to operate and maintain Compact set up

Send Inquiry
Request To Call Back
Product Image (MTK-6864MG)

MINERAL JIG APPARATUS

A jig is a mechanical device used for separating materials of different specific gravity by the pulsation of a stream of liquid flowing through a bed of material. The setup consists of plunger operated by crank mechanism connected to motor coupled with reduction gear box. Sump tank with pump is provided for water circulation. Experimentation/learning objectives: To calculate percentage recovery of small particle. Utilities required: Electric Supply: Single phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection. Earth voltage should be less than 5 volts. Floor Area: 1.5 m x 1 m. Water Supply Floor Drain. Material for Feed. Technical details: Mineral Jig Tank: Material Stainless Steel. Jigging arrangement: Plunger (made of Stainless steel) connected to FHP motor Coupled with reduction gear box Sump Tank: Material Stainless Steel, Compatible Capacity. Water Circulation: HP Pump. Product Tank: Material Stainless Steel, capacity 10 ltrs (approx.), 02Nos. Control Panel comprises of: Standard make on off switch, Mains Indicator etc.

Send Inquiry
Request To Call Back
Product Image (MTK-722KT)

KAPLAN TURBINE TEST RIG

Product Description Owing to our in-depth knowledge of this domain, we are specialized in providing Kaplan Turbine Test Rig. Other information: Kaplan Turbine Test Rig 1 Kw Capacity Kaplan Turbine Test Rig 2 Kw Capacity Product Specification Material: Iron Number of Phases: 3 Type: Air Compressor Test Rig Usage/Application: Test Ring Power: 1kw

Send Inquiry
Request To Call Back
Product Image (JP-5)

Histology Vacuum Tissue Processor

Automatic Tissue Processor is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 -S.S. Basket rotor 1-Tissue basket12-S.S. Tissue capsules 10-1 litre glass beakers 11-beaker covers 2-S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Send Inquiry
Request To Call Back
Product Image (MTS-101434)

SOLID IN AIR DIFFUSION APPARATUS

SOLID IN AIR DIFFUSION APPARATUS The set up comprises glass column, air rotameter, piping and packing material. Metered quantity of airflow is passed through the vertically upwards packed bed. The flow rate can vary for simulating several conditions making use of rotameter. Naphthalene balls are used to form the packed bed for the calculation of mass transfer co-efficient of vaporization in air. Experiments Calculation of the mass transfer co-efficient of vaporization of naphthalene in air, making use of a packed bed of spherical particles of naphthalene. Features: Painted structure Simple to operate and maintain Standalone set up

Send Inquiry
Request To Call Back
Product Image (MTS-101435)

NATURAL DRAFT TRAY DRYER APPARATUS

Owing to the vast experience and knowledge of this field, we have been able to offer premium quality Natural Draft Tray Dryer to prestigious customers. These dryers are commonly used for analyzing the moisture elimination by various condition of high temperature under natural draft action. This draft action is generated by the hot stream of air. Specifications: Electric supply Provide: 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for weighing scale, 15A, three pin socket with switch for heater. Material Saw dust @ 1Kg. Support table Size: 500W x 500D x 750H in mm.

Send Inquiry
Request To Call Back
Product Image (MTK-1032AX)

AXIAL FAN TEST RIG

This equipment comprises of an Axial Flow Fan coupled to an AC Motor. A Pitot tube is provided in the delivery line of axial fan for static, dynamic and differential pressure measurement. Product Specification Type: Air Compressor Test Rig Usage/Application: College Laboratory Material: Stainless steel Automation Grade: Semi-Automatic Phase: Single Phase

Send Inquiry
Request To Call Back
Product Image (JP-5)

Vacuum Automatic Tissue Processor

Automatic Tissue Processor is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 -S.S. Basket rotor 1-Tissue basket12-S.S. Tissue capsules 10-1 litre glass beakers 11-beaker covers 2-S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Send Inquiry
Request To Call Back
Product Image (MTK-784RC)

ROLL CRUSHER APPARATUS

The roll crusher has widely application in the industries of mining, building materials, chemical industry, metallurgy, coal and coke industries etc. The roll crusher can crush materials with middle hardness or less than middle hardness into secondary or fine granularity, such as crushing geological ores, mineral, rocks, coke, coal, slag, scoria, and fire-proof material etc. Rock Roll Crusher Working Principle: The fixed part of roller and movable roller are driven by the motor via reducer and v-belt, the raw materials fall into the part between the two rollers from inlet of the machine. The two rollers rotates inward simultaneously. The materials are extruded, crushed and ground, then the end products come out from the bottom of this crusher. Roll Crusher Features: Double roller crusher adopts v- belt or universal joint couplings for transmission and adjusting the gap between two rollers.

Send Inquiry
Request To Call Back
Product Image (MTFM-01A)

WIND TUNNEL TEST RIG

The Wind Tunnel is simple and safe in operation. It is supplied as a complete self-contained facility mounted on castors for ease of movement. Main equipment comprises the tunnel with a two-component balance system and an air speed indicator. Air enters the test section through a carefully designed contraction followed by an aluminum honeycomb flow straightened designed to ensure that the flow is steady in both magnitude and direction and has a flat transverse velocity profile. A low angle diffuser at the outlet end contributes to flow stability in the test section. A five bladed fan is located at the outlet of the diffuser section. The fan is driven by an AC motor supplied from an inverter speed control unit allowing smooth control of air speed. The parallel octagonal test section is manufactured from clear acrylic and may be retracted on rails to permit unobstructed access to the models. The two-component balance consists of a pair of balances supported on knife edges on mutually perpendicular axes parallel to and normal to the axial centre of the tunnel. Lift and drag components of force exerted on the models under test are balanced by sliding weights along the arms of the balance until a state of null deflection is reached. Graduations in units of force allow lift and drag to be read directly. The complete assembly is linked to a simple oil filled damping pot. Models are mounted on the balance within the working section and a protractor with cursor allows angles of incidence to be changed quickly and accurately while the tunnel is running. The accuracy of the tunnel and its instrumentation make it suitable for undergraduate and simple research work. Features:- Contraction and diffuser: precision glass fiber moldings Test section: clear acrylic, which retracts to permit access to the models. Adjustment of models can be made with the tunnel in operation. Fan: Variable-speed motor driven unit downstream of the working section permitting steeples control of airspeed between 0 and 26ms-1 Balance: Lift and drag Lift “ 7.0N, Drag “ 2.SN, Sensitivity ±0.01 N Air speed: Indicated on inclined manometer directly calibrated in m/s Support structure: A strong steel frame including working surface and fitted with castors for easy movement Demonstration and Measurement Capabilities:- A selection using the models and instrumentation provided are:- Investigation of the development of the boundary layer on a flat plate by measurement of the total head distribution Flow visualization studies around an aerofoil Measurement of pressure distribution around an aerofoil at various angles of attack Measurement of pressure distribution around a cylinder Measurement of lift and drag on an aerofoil with leading edge slot and trailing edge flap Velocity and pressure distribution measurements using a Pitot static tube and yaw probe Measurement of drag for a selection of models of different shapes but common equatorial diameter Demonstration of flutter of an aerofoil Calibration of the wind tunnel velocity indicator using a Pitot static tube and inclined manometer Investigation of the wake behind a cylinder or aerofoil using a wake survey rake Technical Specifications:- Suitable for undergraduate and simple research work. Working section: 304mm wide x 304mm high x 457mm long (octagonal cross- section) Contraction area ratio: 3:1 Motor rating: 1.SkW Flow visualization studies around an aerofoil and cylinder Measurement of pressure distribution around an aerofoil at various angles of attack or around a cylinder Measurement of lift and drag on an aerofoil with leading edge slot and trailing edge flap Velocity and pressure distribution measurements using a pitot static tube and yaw probe Measurement of drag for models of different shapes but common equatorial diameter Demonstration of flutter of an aerofoil Calibration of the wind tunnel velocity indicator using a pitot static tube Investigation of the wake behind a cylinder or aerofoil using a wake survey rake

Send Inquiry
Request To Call Back
Product Image (JP-5)

Automatic Tissue Processor Digital

Automatic Tissue Processor is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 -S.S. Basket rotor 1-Tissue basket12-S.S. Tissue capsules 10-1 litre glass beakers 11-beaker covers 2-S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Send Inquiry
Request To Call Back
Product Image (MTK-1017RV)

ROTARY VACUUM FILTER APPARATUS

The most common types of continuous vacuum filter are the rotary drum filter. A horizontal drum with a slotted face turns at less than 2 rpm in an agitated slurry trough. A filter medium, such as canvas, covers the face of drum, which is partly submerged in the liquid. Under the slotted cylindrical face of the main drum is a second, smaller drum with a solid surface. Between the two drums are radial partitions dividing the annular space into separate compartments, each connected by an internal pipe to one hole in the rotating plate of the rotary valve vacuum and air are alternately applied to each compartment as the drum rotates. The set-up consists of stainless steel drum moving in gunmetal brackets and is divided in 6 compartments, covered by a stainless steel mesh. A canvas filter is used for filtration. The whole assembly is fitted with a ss trough in which a agitator is provided. To make the unit a self-contained a slurry mixing and feed arrangement, receiver tanks, vacuum pump, control panel are provided. Experimentation: To study the performance of a rotary vacuum filter To study the operation of rotary vacuum filter under vacuum To determine the specific cake resistance and medium resistance Utilities Required: Water Supply Drain Slurry Required To Performing Experiment Technical Details: Mesh: material stainless steel Filter: canvas cloth No. Of zones: 6 nos Drive for drum: fhp motor coupled to a reduction gear box Trough: material stainless steel, compatible capacity Trough agitator: material stainless steel, driven by fhp motor with reduction gearbox Slurry tank: stainless steel, capacity 75 ltrs Slurry pump: gear pump with hp motor Slurry tank agitator: stainless steel impeller with ss shaft coupled to fhp motor and reduction gear box Filtrate receiver: material stainless steel, capacity 10 ltrs. (2 nos.) Vacuum pump: liquid ring type coupled to a 1 hp motor

Send Inquiry
Request To Call Back
Product Image (MTS-101436)

FORCED DRAFT TRAY DRYER APPARATUS

Our organization holds expertise in offering premium quality Forced Draft Tray Dryer to our valuable customers. Manufactured as per the industry set standards, these forced draft tray dryers are widely used for the purpose of analyzing the rate of drying of wet sawdust. The offered analyzing is performed under a wide range of different temperature conditions. Specifications: Electric supply: Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for weighing scale, 15A, three pin socket with switch for heater Material: Saw dust @ 1Kg. Anemometer: Air flow measurement

Send Inquiry
Request To Call Back
Product Image (JP-5)

Tissue Processing Unit

Automatic Tissue Processor is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 -S.S. Basket rotor 1-Tissue basket12-S.S. Tissue capsules 10-1 litre glass beakers 11-beaker covers 2-S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Send Inquiry
Request To Call Back
Product Image (MTK-1010LF)

LEAF FILTER APPARATUS

Description: Leaf filters, sometimes called tank filters, they consists of flat filtering elements (leaves) supported in a shell. The leaves are circular, arc-sided, or rectangular, and they have filtering surface on both faces. The shell is a cylindrical tank the set-up consists of flat filtering elements (leaves) supported in a slurry tank. A filter leaf consists of a perforated plate over which a filter medium of woven fabric is fitted. The whole assembly is connected to a vacuum pump through a filtrate receiver. An agitator is fitted in the slurry tank. Drain valve is provided in it. The set-up is operated batch wise. Experimentation: To determine the specific cake resistance for the given slurry using Leaf Filter Product Specification Usage/Application: Industrial Automation Grade: Semi-Automatic Agitator Material: IRON Usage: FOR UNIVERSITY Body Material: S.S Floor Area: IRON Finishing: NEW Flow Rate: >4000 m3/hr Valve Size: 3/4 Vessel Diameter: 400-600 mm Vessel Height: 800-1000 mm

Send Inquiry
Request To Call Back
Product Image (MTK-045AS)

SINGLE STAGE AIR COMPRESSOR TEST RIG

Product Description Single Stage Air Compressor Test Rig consists of a single stage reciprocating type air compressor driven by 1 HP motor through a belt. The outlet of the air compressor is connected to reservoir (Tank) and suction is connected to another air tank with an orifice plate and a water manometer. Bellow is fitted on one side of this air tank to regulate the flow. Temperature of inlet and outlet of air and pressure at outlet can be measured by Temperature sensor and pressure gauge. Experimentation: To calculate the volumetric efficiency. To calculate isothermal HP. To calculate compression ratio. Utilities Required: Tachometer to measure RPM Technical Details: Compressor: Single Stage, Capacity 4 CFM (max.) Manifold Tank: Suitable Capacity Flow Measurement: Orificemeter with Manometer Temp. Measurement: RTD PT-100 type sensor (2 Nos.) Pressure Gauge: Bourdon Type Energy measurement: Electronic Energy meter, L&T make. MCB: For overload protection.

Send Inquiry
Request To Call Back
Product Image (MTS-101437)

ROTARY DRYER APPARATUS

The setup is designed to demonstrate and stimulate the moisture removal by heat under forced draft action created by hot air stream and shower of moist solid due to rotary action of dryer drum. The set-up consists of a long cylindrical shell slightly inclined towards the outlet rotating at low RPM. Counter current hot air from blower passes through heating chamber to produce hot air works as the drying agent entered from one side of the rotating shell and leave from other side removes the moisture from the moist solids. High moisture content feed enters from one end of the shell and low moisture content product discharges from the other end of shell. As the shell rotates internal flights lift the solids and shower them down through the interior of the shell. This action increases the contact of wet solid against hot-air making the dryer very effective. An arrangement is made to vary and measure the airflow rate. A digital temperature controller is used to control and measure the temperature of air stream. Experiments To study the operation of a Rotary Dryer To study the drying characteristics of a solid material under batch drying condition in a rotary dryer Features Superb Painted structure Simple to operate & maintain Compact & standalone set up

Send Inquiry
Request To Call Back
Product Image (MTS-101438)

FLUIDIZED BED DRYER APPARATUS

Description: This is a dryer in which moisture removal takes place by fluidization of solids particles by hot air. The set-up fitted with a specially designed, vertical Glass Column. The lower portion of the column is filled with fluidizing material. The material is supported on the screen mesh held between two flanges. Air from a compressor is heated in the heater box and passed through the column. Flow control and by-pass valve are fitted to regulate the airflow. At the top outlet of column a cyclone is provided to collect any solid particles taken out by the air stream. Experimentation: To study the fluidized bed drying. To plot the drying curve under fluidized bed condition. Utilities Required: Electricity Supply: 1 Phase, 220 V AC, 3 kW. Granular and free flowing solid of size 1 to 2 mm. Technical Details: Control panel comprises of : Digital Temp. Controller: 0 199.9C (For Hot Air) Standard make on/off switch, Mains Indicator etc. Column: Material Borosilicate Glass Dia. 80 mm. Total Length 500mm. Cyclone Separator: Material Stainless Steel, Compatible Capacity with collector. Air Circulation: By forced draft fan, Arrangement is done vary the air flow rate. Heating Chamber: Compatible capacity Heater: Nichrome wire heater Temperature Sensors: RTD PT-100 type.

Send Inquiry
Request To Call Back
Product Image (MTK-478DS)

DOUBLE STAGE AIR COMPRESSOR TEST RIG

The present set-up is designed to study the Double Stage Air compressor. The set-up consists of a double stage reciprocating type air compressor. It is driven by a motor through a belt and pulley system. The drive motor is swinging field type and supplied with dial type spring balance which permits direct torque measurement. This arrangement facilitates the end user to calculate the power transmitted by the motor to the compressor, accurately. To calculate input power to the motor, an energy meter is provided and in this way, by knowing the input and output, efficiency of the compressor is calculated easily. The outlet of the air compressor is connected to air reservoir and suction is connected to another air manifold tank. The compressor draws air from this manifold tank which is provided with bellow at one side. This tank also has an orifice with manometer to observe and calculate the air flow rate. The compressed air from the outlet side of the compressor is stored in provided reservoir. The reservoir is equipped with Pressure Gauge, Control Valve, Safety Valve, Drain etc. A water cooled intercooler for air, in between both head, is provided to cool the hot and compressed air before entering the second stage. Temperature of inlet air, after single compression, inlet and outlet of second compression and pressure in reservoir and at intermediate stage can be measured by Temp. Sensors and pressure gauges. Product Specification Compressor: Double Stage, Double Cylinder, Capacity 6.9 CFM max. Working Pressure Max. 7 kg/cm2 Drive: 2 HP, Crompton/Standard make, Swinging Field type. Spring Balance: Dial type, 10 kg. Flow Measurement: Orifice meter with Manometer Temperature Measurement: RTD PT-100 type sensor (4Nos.)

Send Inquiry
Request To Call Back
Product Image (JP-5)

Automatic Tissue Processor Unit

Automatic Tissue Processor is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 -S.S. Basket rotor 1-Tissue basket12-S.S. Tissue capsules 10-1 litre glass beakers 11-beaker covers 2-S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Send Inquiry
Request To Call Back
Product Image (MTS-101328)

BUCKET CONVEYOR APPARATUS

In this properly designed model a series of buckets are fixed to an endless belt to elevate contents from lower too higher level continuously. The unit is constructed of metal and hard wood parts and is fitted with F.H. 220 volts A.C. motor Complete fitted on a wooden base for about 75 x 30 cm.

Send Inquiry
Request To Call Back
Product Image (MTS-101439)

BATCH CRYSTALLIZER APPARATUS

Description: Crystallization is the formation of solid particles within a homogeneous phase of saturated liquid. Its wide use has a two-fold basis, a crystal formed from an impure solution is itself pure and crystallization affords a practical method of separating. This operation involves both heat and mass transfer. Cooling type agitated batch crystallizer set up consists of an open jacketed stirred vessel provided with water heating & cooling arrangement. The feed is prepared in the crystallizer itself with hot water and stirrer. The hot saturated solution in the crystallizer is then cooled by circulation of cooling water and crystals are formed. Experimentation: To study the performance of a Batch Crystallizer. To determine the crystal yield and the efficiency of crystallizer. Utilities Required: Water Supply. Drain. Electricity Supply: 1 Phase, 220 V AC, 1.5 kW. Required Chemicals. Technical Details: Crystallizer (Jacketed Type): Material Stainless Steel, Cap. 2 Ltrs. with conical bottom Stirrer: FHP, Variable Speed. Heater: Nichrome wire heater Cooling Water Tank: Material Stainless Steel, Capacity 30 litre fitted with Pump. Flow measurement: Rotameter for cooling water. Pump: FHP. Receiving Tank: Material Stainless Steel , Capacity 2 litre with SS sieve Temp. Sensors: RTD PT-100 type Control panel comprises of: Digital Temp. Indicator: 0-199.90C with multi-channel switch and Standard make on/off switch, Mains Indicator etc.

Send Inquiry
Request To Call Back
Product Image (MTK-2014BR)

BOUNDARY RAM TEST RIG

The test section of "Boundary Layer Apparatus has been developed to perform various experiments of aerodynamics and fluid flow. This is a open circuit Wind Tunnel, provides a region of air flow. A layer of fluid, which comes in contact with the boundary surface, adheres to it on account of viscosity, as a real fluid flow past a solid boundary. As a result, 'no slip™ condition prevails. If the boundary is at rest, the fluid at the boundary has zero velocity and the velocity increases if the fluid is away from the boundary. Thus, there, is a thin layer in the vicinity of the boundary within which the velocity has been affected because of the boundary & viscous effects. This thin layer has been termed as the "Boundary Layer. Learning Objectives/Experiments: To study the boundary layer velocity profile. To determine boundary layer thickness & displacement thickness. To determine the exponent in the power-law of velocity distribution. Required for Operation: Electricity supply: Single phase, 220V AC, 50 Hz, 5-15 amp combined socket with earth connection. Earth voltage should be less than 5 volts. Floor Area: 4 m x 1.5 m. Technical Specifications: Type: Open Type Wind Tunnel. Test Section: 200 mm x 200 mm. Blower: Compatible Capacity Motor: Compatible Capacity U Tube Manometer: Length 1 m. Pitot tube: Micro Pitot tube with scale arrangement The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure Control Panel: Standard make On/Off switch, Mains Indicator etc. RPM measurement: RPM Indicator with Proximity sensor.

Send Inquiry
Request To Call Back
Product Image (JP-5)

Teknik Tissue Processing Unit

Automatic Tissue Processor is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 -S.S. Basket rotor 1-Tissue basket12-S.S. Tissue capsules 10-1 litre glass beakers 11-beaker covers 2-S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Send Inquiry
Request To Call Back
Product Image (MTS-101327)

BELT CONVEYOR APPARATUS

In this properly designed model an endless wide belt conveys load from one place to another continuously. The unit is constructed of metal and hard wood parts and is driven with F.H.P. 220 volts A.C. motor. Complete fitted on wooden base of about 75 x 30 cm size.

Send Inquiry
Request To Call Back
Product Image (MTK-7455MS)

MULTI STAGE CENTRIFUGAL PUMP TEST RIG

Country of Origin: Made in India Pump: 2 or 3 stage, capacity 2HP, speed 2800 RPM (MAX.) Drive: 2 HP DC motor swinging field type With speed control Spring balance: Dial type Sump tank: 800 x 500 x 400 mm size , Capacity 160 liters approx. (stainless steel material ) Measuring tank: 400 x 500 x 400 mm size, Capacity 80 liters approx., Fitted with Piezo-meter Tube scale.(stainless Medium flow: Clear water Gauge: One piece vacuum gauge And one piece pressure gauge Stop watch: Electronic type Pressure gauge: Bourdon type , range 0-4 kg/cm2 Vacuum gauge: Bourdon type , range 0-760 mm of Hg Tank material: (stainless steel material ) Pipe fitting: GI pipe.

Send Inquiry
Request To Call Back
Product Image (JP-5)

Vacuum Tissue Processor 1 Liter

Automatic Tissue Processor is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 -S.S. Basket rotor 1-Tissue basket12-S.S. Tissue capsules 10-1 litre glass beakers 11-beaker covers 2-S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Send Inquiry
Request To Call Back
Product Image (MTS-101440)

SWENSON WALKER CRYSTALLIZER APPARATUS

The set-up is designed to demonstrate and stimulate the phenomena of crystallization. Swenson Walker crystallizer is a continuous type crystallizer. This operation involves both heat and mass transfer. Crystallization is the formation of solid particles within a homogeneous phase. Its wide use has a two-fold basis; a crystal formed from an impure solution is itself pure. The setup consists of a top open jacketed round bottom trough. A ribbon mixer is provided in crystallizer trough, which rotates at low rpm for agitation of saturated solution. The saturated solution is prepared in a tank fitted with heater and a stirrer. This hot saturated solution is fed at one end of the crystallizer and flows slowly towards the other end while being cooled and is allowed to flow back in hot feed tank making the process continuous. The crystals sediments at the bottom of the trough, and can be washed out at the end of process. Arrangement for Cooling water circulation and flow measurement in jacket is made by using storage type water tank, a pump and a rotameter. Necessary instrumentation is done for temp measurement Experiments To study the performance of a Swanson Walker Crystallizer. To determine the crystal yield and the efficiency of crystallizer. Features Superb Painted structure. Simple to operate & maintain. Compact & standalone set up. Utilities Required Chemicals commercial grade material as per choice

Send Inquiry
Request To Call Back
Product Image (MTS-101330)

SCREW CONVEYOR APPARATUS

In this properly designed model an endless wide belt conveys load from one place to another continuously. The unit is constructed of metal and hard wood parts and is driven with F.H.P. 220 volts A.C. motor. Complete fitted on wooden base of about 75 x 30 cm size.

Send Inquiry
Request To Call Back
Product Image (MTS-101442)

VAPOUR-LIQUID EQUILIBRIUM SET-UP APPARATUS

Micro Teknik manufactures and supplies optimum quality Vapour Liquid Equilibrium Set-Up, useful in study of the vapor-liquid equilibrium. This robustly constructed product is easy to operate and maintain. Input voltage: 100240V AC Frequency: 50/60Hz Tidal volume range (V t): 0 mL to 1,500 mL Patient airway pressure range: -2kPa 10kPa

Send Inquiry
Request To Call Back
Product Image (JP-5)

Fully Automatic Digital Tissue Processor

Automatic Tissue Processor is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 -S.S. Basket rotor 1-Tissue basket12-S.S. Tissue capsules 10-1 litre glass beakers 11-beaker covers 2-S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Send Inquiry
Request To Call Back
Product Image (MTS-1011RM)

RIBBON MIXER APPARATUS

Ribbon: Material Stainless Steel, Double Helicoids Type Collecting Bin: 1 No. Pvc Cover For Trough Material: Stainless Steel Drive: 1/2 Hp Motor Coupled To Reduction Gear Box Control Panel Comprises: Standard make On/Off switch, mains indicator etc Floor Area: 1 m x 1 m Electric Supply: Single Phase, 220 V AC, 1 kW Mixing Trough Material: Stainless Steel Size: 400x200x250 mm

Send Inquiry
Request To Call Back
Product Image (MTS-14022)

BERNOULLIS THEOREM APPARATUS

Our organization is counted among the listed manufacturers, wholesalers and exporters of premium quality Bernoullis apparatus. Offered apparatus is precisely manufactured under strict supervision in compliance with industry laid parameters. These units consist of a rectangular transparent flow section through which water is to be flown. The velocity of water changes across the sectional area of channel changes. Experiments: To verify Bernoullis Theorem experimentally Utilities Required: Electric supply 0.5 kW, 220V AC, Single Phase Water supply Tap water connection BSP Distilled water @ 60 liters (optional) Floor Area with Drain facility Technical Specifications: Measuring Tank Capacity: 40 Ltrs. MOC SS fitted with Piezometer Tube & scale Electric supply: 0.5 kW, 220V AC, Single Phase Inlet Tank Capacity: 20 Ltrs. MOC SS Supply Tank Capacity: 85 Ltrs. MOC SS Piezometer Tubes: Material P.U. Tubes (9 Nos.)

Send Inquiry
Request To Call Back
Product Image (P-S2)

SIGMA MIXER APPARATUS

Used for mixing of highly viscous mass, sticky and dough like products, mixing of pastes, rubber, and heavy plastic masses, Application & Process: The Sigma Mixer is used for mixing and kneading for mixing, kneading of highly viscous mass, sticky and dough like products, Mixing of pastes, rubber, and heavy plastic masses, applications in Food, Rubber, Pharmaceutical, Chemical and agro industries, Dry powder to wet phase mixing. This mixer is most suitable for highly viscous material and dough like masses. Total Capacity Liters: 8, 75, 150, Working Capacity Liters: 3- 5, 35-50, 70-100, 110-150

Send Inquiry
Request To Call Back
Product Image (MTK-1442SL)

MASS TRANSFER WITH & WITHOUT CHEMICAL REACTION (SOLID -LIQUID) APPARATUS

Power: 500 Watt (w) Material: Metal Usage For: Laboratory Voltage: 220 Volt (v) Equipment Materials: SS Temperature Range: 50 Celsius (oC) Display Type: Digital

Send Inquiry
Request To Call Back
Product Image (J-8ED)

Semi Automatic Microtome.

A sturdy microtome usable in sectioning slime and sensitive incision from tissues. Semi-automatic cut sections from 0.2560. Product Description: Advanced driving systems, functions of section, trimming, fast forward, backward etc LCD screen shows section and trimming thickness range, numbers of section and trimming Exchange Between section and trimming mode can be finshed by controlling systems Handwheel can be locked at any position to assure user™s safety Large waste tray is easy to clean and unload Universal cassette clamp and standard specimen clamp; Emergency stop systems Section thickness range: 0.2560 M Trimming thickness range: 0.2560 M Minimum setting value: 0.25 M Object feed: 28mm Vertical stroke: 60mm Maximum specimen size: 50 X 50mm

Send Inquiry
Request To Call Back
Product Image (MTK-39VMOR)

DISCHARGE THROUGH VENTURI-METER & ORIFICE METER APPARATUS

Voltage: 220-240V Body Material: Mild Steel Measuring Tank: 32 Liters Throat Diameter: 16 mm Sump Tank: 100 Liters Orifice meter Material: Clear Acrylic Compatible to 1 Inch

Send Inquiry
Request To Call Back
Product Image (MTK-6816MX)

FLUID MIXER AND POWER CONSUMPTION IN AGITATED VESSEL APPARATUS

For a processing vessel to be effective the volume of fluid circulated by the impellers must be sufficient to sweep out the entire vessel in a reasonable time. The velocity of the stream leaving the impeller must be sufficient to carry the current to the remotest parts of the tank. Liquids are most often mixed in some kind of tanks or vessels, usually cylindrical in form and with a vertical axis. Tank bottom is rounded to eliminate regions into which the fluid currents would not penetrate. In the present set-up mixing is done with the help of stirrer. The stirrer is complete with SS Impeller with SS Shaft coupled to FHP DC motor. The speed of agitator can be varied with the help of Thyristor controlled DC Drive and power consumption is measured by Digital Voltmeter & Digital Ammeter. Four replaceable baffles are provided to prevent swirling. One 4-bladded propeller and one 6- bladded turbine are provided which are interchangeable. Drain valve is also provided at the bottom. Effectiveness of power consumption in fluid mixing can be performed with and without baffles hence increasing the range of experimentation. The whole set-up is mounted on a rigid MS frame structure. Product Specification Ammeter: 0-5 Amps Digital Voltmeter: 0-300 Volts Tank Material: Stainless Steel Tank Diameter: 300 mm Tank Depth: 400 mm

Send Inquiry
Request To Call Back
Product Image (MTS-101377)

EXPERIMENTAL WATER COOLING TOWER APPARATUS

Micro Teknik Our organization has gained acknowledgment as the affluent manufacturer, trader and supplier of a qualitative Water Cooling Tower Apparatus. The offered apparatus is designed for the Engineering students. Experimental Water Cooling Tower Is A Forced Draft Counter Flow Type Cooling Tower Specially Designed For The Engineering Students To Provide Them Insight About Actual Working Of Tower. In This System, Air From A Fan Enters At The Bottom Of The Tower And After Passing Through The Mesh Packing, Discharges Into The Atmosphere Via A Duct. Airflow Is Controlled By A Butterfly Valve On The Blowers Delivery Line. Water Is Evenly Distributed Over The Packing By Nozzles At Top Of The Tower. Water Flow And Temperatures Can Be Measured And Controlled With Suitable Instrumentation Provided. A Water Tank At The Bottom Fitted With Level Gauge Enables To Show The Exact Evaporation Loss. Front Side Acrylic Sheet Provides Actual Visualization Of Cooling Tower Operation. Air And Water Flow Rates As Well As Inlet Water Temperatures Can Be Varied To Have Different Sets Of Readings. Experimentation Actual Visualization Of The Cooling Tower Operation To Determine The Mass Transfer Coefficient Utilities Required Water Supply & Drain Electricity Supply : 1 Phase, 220 V Ac, 3 Kw Floor Area Of 12 M X 1m

Send Inquiry
Request To Call Back
Product Image (MTK-9745AL)

DISCHARGE THROUGH VENTURI-METER ORIFICE METER & ROTA-METER APPARATUS

The present set-up is designed to study three type of flow measuring devices. These are orifice meter, Venturimeter and rotameter. The set-up also facilitates the end user to calculate fluid discharge through these devices. By determining the co-efficient of discharge of venturi meter and orifice meter, these devices can be used as a direct flow meter and can be installed in a fluid line. Rotameter is provided with a pre-calibrated scale. By passing a known flow of fluid through the rotameter and comparing this to provided scale reading, end user can recalibrate the rotameter. The apparatus consists of three pipe lines emerging out from a common manifold. All three pipe line has been installed with a test section. One has venturi meter, second has an orifice meter and third one is having a rotameter. The Venturi meter, Orifice meter and Rotameter are connected in parallel and any one of them can be put in operation by operating valves provided at the downstream. Pressure taping from venturi meter and orifice meter are taken out to pressurized differential pressure manometer. Present set-up is self-contained water re-circulating unit, provided with a sump tank, centrifugal pump etc. Water is pumped by means of centrifugal pump and passing through the test sections, it returns back to the sump which make the system re-circulating type. Flow of water is diverted either to measuring tank or sump tank with the means of a flow diverter, when needed. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank with piezometer and stopwatch. The supplied set-up is complete in all respect. Only water supply and electricity supply is to be provided by the end user for running the set-up. Product Specification Venturi meter: Body Material Acrylic, compatible to 1 inch Dia. Pipe. Orifice meter: Body Material Acrylic, compatible to 1 inch Dia. Pipe. Orifice Plate: Made of Stainless Steel Rotameter: Glass Tube Rotameter. Water Circulation: 1/2 HP Pump, Crompton/Standard Make. Flow Measurement: Using Measuring Tank with piezometer Capacity 25 Ltrs. Sump Tank Capacity: 50 Ltrs.

Send Inquiry
Request To Call Back
Product Image (JCR-1B)

CRYOSTAT MICROTOME

Most versatile section cutting machine for quick sectioning of tissues. Instantly freezes on built-in rapid freeze stage for biological, veterinary and medical diagnostic biopsies etc. The Microtome is completely made of brass & stainless steel and is placed in stainless steel cold chamber with an observation glass window. Provided with a hermetically sealed compressor unit with 'A™ grade components to achieve quick o cooling of up to -80 C. It is provided with feed range from 0-40microns in steps of 2 microns each. Accessories supplied with equipment:- Razor-120 mm with back & handle-one Object holder-set of three Honing Stone-one Oilcan with low temperature-one Dust cover-one

Send Inquiry
Request To Call Back
Product Image (MTK-601ET)

ION EXCHANGER APPARATUS

Column (2 Nos.): Material Borosilicate Glass / Stainless Steel Dia 55mm, Length 500mm approx. (For Anion & Cation) Water Tank: Material Stainless Steel, Capacity 25 Ltrs. Bench Area: 1.2 m x 1 m Electricity Supply: 1 Phase, 220 V AC, 0.5 kW Piping: Stainless Steel and PVC Size: 1/4 Inch Feed Circulation: FHP Pump Tullu / Champion make Flow Measurement: Rotameter, Eureka make Conductivity Measurement: Digital Conductivity Meter

Send Inquiry
Request To Call Back
Product Image (P-B6A)

BALL MILL APPARATUS

Features: Highly efficiently Rust proof Abrasion resistant Experimentation: To Study Effect of Rpm on the Power Consumption of a Ball Mill To Determine the Efficiency of a Ball Mill for Grinding a Material of Known WI Utility Required: Raw Material for Feed. Set of Sieves with Sieve Shaker for Analysis Steel Balls Technical Details: Revolution Counter: Mechanical Type Product Receiver: Material Stainless Steel of Suitable Size Control Panel Comprises Of Energy Measurement: Electronic Energy Meter Mcb: For Overload Protection Standard Make On/Off Switch, Mains Indicator Etc. Instruction Manual: An English Instruction Manual Will Be Provided Along With The Apparatus The Set-Up Is Fitted With Required Guards The Whole Set-Up Is Well Designed and Arranged In a Good Quality Painted Structure Product Specification Usage/Application: laboratory equipment Power Source: Electric Voltage: 220V AC Motor Power: 1 HP Power: 1 kW Material: mild steel Phase: Single Phase Ball Mill Diameter: 275 mm Ball Mill Length: 350 mm Ball Mill Material: ms Ball Mill Thickness: 5 mm Feed Size: 6 mm (Approx.) Floor Area: 1.5 x 1 m Product Size: 200 Mesh

Send Inquiry
Request To Call Back
Product Image (J-8)

ROTARY SENIOR MICROTOME

Rotary Senior Microtome (Spencer 820 type):most modern and reliable sectioning equipment designed for very precise sectioning of tissues upto 1 micron thickness. The feed indicator, located in front of microtome is operated by the latest 'CAM DRIVE SYSTEM™ for accurate feed setting from 1-50 microns in steps of one micron. It is graduated in microns, is conveniently located in the front for instant references and its setting is controlled by a knurled knob at the back of the microtomes. The interior mechanism rests on a heavy cast iron base and is covered with a full swing protective cover for easier cleaning and lubrication. The Salient features include independent feed mechanism with automatic safety device, universal knife holder with lateral movements permitting use of the entire knife edge, universal vice type object holder for accurate centering of the specimen. The instrument ensures life -long smooth operation .Individual components are fabricated and assembled using latest technology and selected materials. The knife supplied with the microtome is fabricated from imported fine grain steel tested for micro-structure and is heat treated for optimum rigidity and sharpness. Technical features:- Feed adjustment -1-50 microns Total feed excursion “ 28 mm Opening of object clamps : 37—27 mm Accessories supplied with equipment:- Razor-120 mm-one Object holders-set of three Oilcan-one. Packed in card board box and thermocol packing

Send Inquiry
Request To Call Back
Product Image (MTK-958NM)

NOZZLE METER TEST RIG APPARATUS

The apparatus consists of a Nozzle meter. The flow can be regulated by the valve provided at the downstream Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch Experiments To measure discharge through Nozzle meter and to calibrate it Utilities Required Electric supply 0.5 kW, 220 V AC, Single Phase Water supply Tap water connection. Experiment To determine the co-efficient of discharge for nozzle meter at different flow rates. Requirements Consisting of Transparent acrylic Nozzle meter, Manometer and Piezometer, 0.5 hp pump, Sump tank and delivery tank, Pressure tapping valves and controlling valves.

Send Inquiry
Request To Call Back
Product Image (J-8E)

Automatic Tissue Microtome

A sturdy microtome usable in sectioning slime and sensitive incision from tissues. Semi automatic cut sections from 0.5 p to 100 p. Sample feed of the microtome is automatically and perform the Manually and sectioning process manually. Section And Trim Function Made By Pressing Button In Control Panel, Section Speed Can Be Adjusted By Speed Control Key.With Function Of Emergency Stop. This is microproccessor controlled with LCD screen on the sections and status of error. Having command control module to control the proposed device. Also having an integrated waste collection folder.. A standard sample holder is provided with the proposed device optionally a glass knife holder Features: Section Range From 0.5micron To 100micron Meter. Min. Set Value Is 0.50micron Meter. Trimming Range From 1“600micron Meter. Max. Specimen Size: 50 X 50mm. Accessories supplied with the Microtome: Disposable blades ( 50 ) and blade holders, A set of Block holders.

Send Inquiry
Request To Call Back
Product Image (MTK-310PT)

PITOT TUBE SET-UP APPARATUS

A Pitot tube is used to measure the local velocity at a given point in the flow stress. A pitot tube of standard design made of copper/SS is supplied and is fixed below vernies scale. The vernies scale is capable to measure the position of Pitot tube in transparent section. The pipe has a flow control valve to regulate the flow. A U-tube manometer is provided to determine the velocity head. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch. Product Specification Phase: Single Phase Material: Stainless Steel Current: 5-15 amp Frequency: 50Hz Voltage: 220V AC Floor Area Required: 1.5 x 0.75 m

Send Inquiry
Request To Call Back
Product Image (MTK-6849HD)

HUMIDIFICATION & DEHUMIDIFICATION SETUP APPARATUS

Description: The setup consists of two glass columns with packings of rashing rings and silica gel. Air flow rates can be set and measured by Rotameter and temperature by RTD type temperature sensors. Flow rate of air and water if measured by rotameter. Experimentation: To calculate Humidity for humidification & dehumidification. To calculate the mass transfer coefficient in the Humidification column. Product Details: Voltage: 220 Volt (v) Material: Metal Power: 500 Watt (w) Equipment Materials: SS Temperature Range: 50 Celsius (degree C)

Send Inquiry
Request To Call Back
Product Image (MTK-8154RM)

ROD MILL APPARATUS

Rod Mills are horizontal rotating cylindrical steel chamber of half filled with steel rods of length slightly less than the length of chamber. The rods are of different diameter. The size reduction is accomplished by the impact of rods as they fall back after being lifted by the rotating chamber. Rod Mill is fitted on a sturdy MS frame. Charging of rods and material is done by the means of opening provided in the chamber. The chamber is turning about the horizontal axis through a reduction gearbox drive through a motor. The stepped pulley arrangement is done for moving the Rod Mill at three different speeds. A revolution counter is provided to find out the number of turns. Special arrangement is done to free the Rod Mill from reduction gearbox for charging and discharging the material. Experimentation/learning objectives: To determine the efficiency of a Rod Mill for grinding a material of known WI. To study effect of RPM on the power consumption of a Rod Mill. Utilities required: Electric Supply: Single phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection. Earth voltage should be less than 5 volts. Raw Material for Feed. Sieve Shaker with set of sieves for analysis. Floor area: 1.5m x 1.0m Technical details: Rod Mill : Material MS Dia 275mm, Length 350mm. Thickness 4 mm (approx.) With rods of compatible size & quantity Discharge Chute: Suitable size. Drive: 1HP motor coupled to Reduction Gearbox & 3-step pulley. Product receiver: Material Stainless Steel of suitable size. Control Panel Comprises of: RPM measurement: By proximity sensor with Digital indicator Energy measurement: Electronic Energy meter. MCB: For overload protection. Standard make on/off switch, Mains Indicator etc. The set-up is fitted with required guards.

Send Inquiry
Request To Call Back
Product Image (MTS-915)

SOLID-SOLID EXTRACTION APPARATUS

Contaminants may be present sorbed in the solid particles of the soil. Solid-liquid extraction allows these contaminants to be removed from the soil. Depending on the contaminant and the type of soil, a suitable solvent needs to be selected for this process. One field of application for example, is the separation of organic contaminants that are present sorbed in fine solid particles. Solid-liquid extraction may take place after these fine particles have been separated by a hydrocyclone in the ex-situ treatment of contaminated soil. The fundamental principle of solid-liquid extraction can be learned with the temperature of the solvent can be adjusted. Thus, it is possible to investigate the effect of this parameter on the separation process. The principle of counter current in solid-liquid extraction: Extract outlet, Extraction residue, Extractant inflow, Extraction material inflow, A Path of the extract, B Path of the extraction material

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Vertical Freeze Dryer

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTK-974CA)

CAVITATIONS APPARATUS

The apparatus has been designed to demonstrate the phenomenon of cavitation. The present set-up consists of a test section made of Acrylic having conversion and diversion section. Pressure tapings at appropriate position are provided. This test section is having one control valve at upstream side to regulate the water flowrate. Two pressure gauges are connected to these taping which give the pressure readout at the time of flow passing through this test section. Present set-up is self-contained water re-circulating unit, provided with a sump tank, centrifugal pump etc. Water is pumped by means of centrifugal pump and passing through the test section, it returns back to the sump which make the system re-circulating type. Flow of water is diverted either to measuring tank or sump tank with the means of a flow diverter, when needed. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank with piezometer and stopwatch. The supplied set-up is complete in all respect. Only water supply and electricity supply is to be provided by the end user for running the set-up. Product Specification Test Section: Material Acrylic Pressure Gauge: 0-4 kg/cm2 Vacuum Gauge: 0-760 mmHg Water Circulation: By Pump, Crompton/Standard make. Flow Measurement: Using Measuring Tank, Capacity 40 liters Sump Tank Capacity: 60 Ltrs. Stop Watch: Electronic

Send Inquiry
Request To Call Back
Product Image (P-H2)

HAMMER MILL APPARATUS

Hammer mill is an economical unit designed for general all-round work for time saving operation. Most often, the only changes necessary are of Screens, hammers and liners. Feed Material passes through a wide feed hopper into the grinding chamber. The swinging hammers, in the rotating hammer rotor, crush materials at the stationery liners before driving them through a screen and type of hammers used. The method of operation is impact grinding. Combination of different hammer styles, liner plates, sieve inserts and wear resistance technology offer almost unlimited possibilities of crushing lumpy, bulky, irregularly shaped, hard & fibrous materials, into coarse to medium fine powder. Machine to work on 220V AC 50 Hz single phase.

Send Inquiry
Request To Call Back
Product Image (JP-12)

Automated Stainer

The Unit has fully functional color touch screen integrated into the main body. The software support multiple languages with easy switch between languages. The Unit has battery back-up to continue staining for approximately 40 minutes in the event of a power failure. The unit has an integrated USB port to allow the user to save protocols, instrument setup, and QC files for printing and/or back-up. The control software is capable of storing up to 50 programs in memory. The unit has the option of on-board heating stations. Heated models have 5 independently heated oven stations. The unit has the option to connect exhaust extraction to protect from venting fumes into the laboratory. The unit has built-in lighting to allow the user a high clarity view of the staining area. The software have an Auto-Return feature to enable users to recall to the load door any previously loaded rack of slides. The software has an Urgent Start feature that enables users to prioritise slide racks. Staining pots are capable of holding 320 ml of reagent. Staining pots is capable of being cleaned in a dishwasher to minimize manual cleaning. The software access-code protected. The software has an Auto-Allocate feature to provide the most efficient layout of reagents based upon the protocols entered.

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Teknik Freeze Dryer

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTS-1014SB)

SIMPLE BATCH DISTILLATION SETUP APPARATUS

The equipment consists of a distillation still made of stainless steel. Feed in the still is heated externally by heater. The vapours form at the top of the vessel, are condensed in condenser by circulating cooling water. Temperature of the feed mixture is controlled by means of a digital temp. Controller. The condensate is collected in a receiver made of stainless steel. Product Specification Flow measurement: Rotameter for cold water for condenser Distillation still: Material Stainless Steel, capacity 5 ltrs. (approx.) Insulated with ceramic wool and cladding with A Condenser: Concentric Tube type (Material- Stainless Steel) Distillate tank: Material- Stainless Steel, capacity 2 Ltrs. Heater: Nichrome wire heater.

Send Inquiry
Request To Call Back
Product Image (MTK-4211VS)

VIBRATION SCREEN APPARATUS

Vibrating screens are those, which rapidly vibrated with small amplitude, are less likely to blind than gyrating screens. The vibrations may be generated mechanically or electrically. Mechanical vibrations are usually transmitted from high-speed eccentrics to the casing of the unit and from there to inclined screens. The setup consists of three different screen with fitted on a rigid M.S. frame, feed hopper, eccentric etc. Three screens of different sizes are fitted one above the other. The drives are given from an electric motor. Product Specification: Voltage: 220 V AC Floor Area: 1.5 m x 1 m Width: 380 mm Drive: Eccentric Shaft Coupled to Motor Length: 600 mm Mesh: 12.7 mm, 9.5 mm and 6.3 mm Control Panel Comprises of: Standard Make On/Off Switch, Mains Indicator etc. Collecting Bins: 4 Nos. of Suitable Capacity Electric Supply: Single Phase, 0.5 kW

Send Inquiry
Request To Call Back
Product Image (MTFM-10)

LAMINAR FLOW TABLE APPARATUS

Laminar Flow Table is an improved version of the classical Heel-Shaw apparatus with the addition of sinks and sources. It consists of two closely spaced sheets of laminated glass, arranged horizontally on a glass fiber molding. An inlet tank and discharge tank are incorporated in the molding, which is supported on a floor standing, metal frame. Three adjustable feet enable rapid leveling off the flow table. Eight miniature tapings, which may be used as sinks or sources, are arranged about the centre line of the lower glass plate in a cruciform configuration. A doublet is located at the centre of the pattern. A system of pipes, valves and manifolds enables any combination of the sinks and sources to be used. A row of control valves mounted above the flow table is used to adjust the flow through each individual source. A row of sink control valves is used to adjust the flow through each individual sink. A row of hypodermic needles attached to a manifold is positioned between the glass plates at the inlet edge. To visualize the flow of water between the glass plates dye is injected through the equally spaced needles. The position of each streamline is clearly indicated by the dye, which is supplied from a reservoir fitted with a flow control valve. A black reticule on a white background is printed on the underside of the lower glass plate to aid visualization of the streamlines. The patterns created by the potential flow may be recorded by tracing on the top glass sheet or by photography if required. A diffuser in the inlet tank and an adjustable weir plate in the discharge tank help to promote a uniform flow of water. Valves are incorporated in the base of these tanks to aid draining. The flow of water is controlled by an inlet flow control valve. A pressure regulator reduces the mains water pressure and helps to minimize variations in flow. The top glass plate may be raised at the front edge and retained in this position to enable models to be placed in the working section. A set of models are supplied for basic flow studies. These models are manufactured from plastic sheet and are trapped in the required position when the top glass plate is lowered. Alternative models can be fabricated from any convenient material and used to investigate the associated flow patterns. Two-dimensional laminar flow is created between the two glass plates by the combination of low fluid velocity and the narrow gap between the plates

Send Inquiry
Request To Call Back
Product Image (JCR-1)

CRYOSTAT MICROTOME.

Cryostat Microtome: Most versatile section cutting machine for quick sectioning of tissues. Instantly freezes on built-in rapid freeze stage for biological, veterinary and medical diagnostic biopsies etc. The Microtome is completely made of brass & stainless steel and is placed in stainless steel cold chamber with an observation glass window. Provided with a hermetically sealed compressor unit with 'A™ grade components to achieve quick cooling of up to -40C. It is provided with feed range from 0-40microns in steps of 2 microns each. Accessories supplied with equipment:- Razor-120 mm with back & handle-one Object holder-set of three Honing Stone-one Oilcan with low temperature-one Dust cover-one

Send Inquiry
Request To Call Back
Product Image (MTS-101253)

METACENTRIC HEIGHT APPARATUS

Metacentric Height Apparatus Complete with Collecting Tank: Micro Teknik For the purpose of providing the best Metacentric Height Apparatus to our clients, we use raw materials of the finest quality and strictly as per the set industrial standards, the quality standard never deteriorates. Made available in the market at a very competitive price, the offered product of impeccable functionality and efficiency, is one of the best available in the market. Technical Specifications: Pontoon: Size 300 x 300 mm (approx.) with a Horizontal Guide Bar for aliding weight and Removable Strips, Graduated arc with Pointer with moveable hanger And set of weights Water Tank: Size 550 x 500x 400 mm (approx.)Front Window of Tank: Made of Glass/Perspex A set of weights is supplied with the apparatus Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel Pendulum and graduated are for accurate measurement of Tilt angle

Send Inquiry
Request To Call Back
Product Image (MTK-87VD)

VACUUM TRAY DRYER APPARATUS

VACUUM TRAY DRYER (VTD) is used mainly for drying of high grade, temperature and oxygen sensitive products. Vacuum Tray Dryer is highly suitable for drying hygroscopic substances, which are dried to very low residual moisture, content level. Available Capacity (No. of Trays) “ 6, 24, 48, 96 and 192. MOC- MS/ SS 304/ SS 316/ SS 316L Tray size in air tray dryer is same in all different capacity (800mmX400mmX32mm). Trolley provided for easy loading and unloading of trays as optional.

Send Inquiry
Request To Call Back
Product Image (MTK-847TA)

TROMMEL APPARATUS

Trommel or revolving screens consists of a cylindrical screen rotated about its axis. Simple Trommel may be arranged in series with oversize of the first passing to the second Trommel and the oversize of the second passing to the third, etc. They are quite efficient for coarse sizes. The inclination of Trommel varies depending on the nature of material to be processed. The present Trommel is built with screens of different sizes throughout their length, the feed entering at the end of the finest screen. In this way it is possible to collect materials of different size range from a single Trommel. Drive to the central shaft is given through a variable speed motor coupled to reduction gearbox. Drive is provided for conducting the experiment at varying speed. Set-up is complete in all respect with guards, bins and control panel. A special arrangement to change the angle of inclination of the Trommel is made. Experimentation/learning objectives: To calculate the separation efficiency. To study the effect of speed on separation efficiency. To study the effect of changing the angle of inclination and RPM Utilities required: Electric Supply: Single phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection. Earth connection should be less than 5 volts. Raw Material for Feed. Floor Area: 2 m x 1 m. Electronic Weighing Balance: capacity 2 Kg (least count 1 gm) Technical details: Trommel: Dia. 200-mm, Length 1000-mm (approx.) Sieves: 3 Nos. of different mesh size. Drive: Variable Speed Motor and Drive speed coupled with reduction gear box. Feed Hopper: Compatible Capacity. Collecting bins: 4 Nos. of suitable capacity. Control panel Comprises of : RPM Measurement : Non-Contact type Proximity sensor with Digital RPM Indicator Standard make On/Off switch, Mains Indicator etc. Special arrangement for changing the angle of inclination

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Lab Freeze Dryer

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTK-8745CP)

CENTER OF PRESSURE APPARATUS

The Centre of Pressure Apparatus has been designed to determine the static thrust exerted by a fluid on a submerged surface and allow comparison of the measured magnitude and position of this force with simple theory. A fabricated quadrant is mounted on a balance arm, which pivots on knife-edges. The knife-edges coincide with the centre of arc of the quadrant. Thus, of the hydrostatic forces acting on the quadrant when immersed, only the force on the rectangular end face gives rise to a moment about the knife-edges. The balance arm incorporates a balance pan for the weights supplied and an adjustable counterbalance. This assembly is mounted on top of an acrylic tank, which may be leveled by adjusting screwed feet. An indicator attached to the side of the tank shows when the balance arm is horizontal. Water is admitted to the top of the tank by a flexible tube and may be drained through a cock in the side of the tank. The water level is indicated on a scale on the side of the quadrant. LEARNING OBJECTS/EXPERIMENTATION: Determining the centre of pressure on both a submerged or partially submerged plane surface and comparison with the theoretical position. REQUIREMENT FOR OPERATION: Water Supply: Initial Fill Drain Bench Area Required: 0.5 m x 0.25 m TECHNICAL SPECIFICATION: Tank capacity: 5 litres (approx.). Distance between suspended mass & fulcrum: 275mm Cross-sectional area of quadrant (torroid): (100 x 100) mm 2Total depth of completely immersed quadrant: 160 mm Height of fulcrum above quadrant: 100 mm Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus The whole set-up is well designed and arranged in a good quality painted structure. Control Panel: Standard make on/off switch, Mains Indicator etc.

Send Inquiry
Request To Call Back
Product Image (MTK-2100RS)

ROTAP SIEVE SHAKER APPARATUS

The rotap sieve shaker reproduces the circular and tapping motion given to test sieves in hand sieving. The uniform, mechanical action ensures accurate and dependable test. Using the regular height 20-cm diameter sieves, one sample can be tested on a series of six sieves of different openings, all with one operation of machine. The Rotap Sieve Shaker is simple and durably constructed and is run by a motor. The running parts operate in oil. The machine is easily installed. No special foundation is required. Test Sieves are supplied at extra cost. A time switch from 0 to 60 minutes is provided.

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Food Freeze Dryer

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTAT-04C)

GYRATORY SIEVE SHAKER APPARATUS

Sieve shaker (Gyratory) is to carry up to 7 sieves of 6 inch or 8 inch diameter. The 12 inch dia. sieves can be used with the help of Adaptor. A 1/4 HP. motor through a reduction gear immersed in oil drives the shaker. The sieve table dies not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. Features:- In addition to the Gyratory motion of the table, there is an upward and downward movement ensuring that each square inch of the sieve is utilized. The whole gear mechanism runs is an oil bath Robust construction Unmatched performance Long service life Easy installation

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Vacuum Freeze Dryer

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTK-500EV)

ELECTRICAL VORTEX APPARATUS

A low-voltage, variable-speed motor rotates the vessel about its vertical axis. A speed-control unit (included), sited away from the main apparatus, controls the speed of rotation. Vortex Apparatus enables students to produce both free and forced vortices, and measure the vortex water surface profile. To produce a free vortex, students place a smaller, perforated transparent cylinder inside the main vessel. This forms an annulus into which a continuous water supply is directed. When the vessel rotates, water passes through the perforations and spirals slowly inwards to a small hole in the centre of the base of the vessel. The surface falls rapidly towards the centre and produces an air core. Students measure the surface profile using the traverse probe. The equipment consists of a transparent vessel on a support frame, which mounts on a hydraulic bench (Gravimetric or Volumetric Hydraulic Benches, H1 or H1D - available separately). It may also work with another suitable clean water supply and drain. To produce a forced vortex, students add water to the rotating vessel until it is about half full. A forced vortex forms. After a few minutes the vortex becomes constant, and students can measure the surface profile using the traverse probe. The traverse probe can move both horizontally and vertically, and both axes have linear scales. Students can also measure distribution of total head by replacing the traverse probe with a Pitot tube.

Send Inquiry
Request To Call Back
Product Image (MTS-3522)

FLOW THROUGH ORIFICE & MOUTH PIECE APPARATUS

Product Description: Item code: MTS-3522 Our company offers optimum quality Orifice and Mouthpiece Apparatus at the most reasonable market price. This apparatus is manufactured under the supervision of expert professionals, using best quality raw materials. The apparatus manufactured by us is used for the purpose of measuring fluid flowing through an open channel. Offered apparatus is exclusively demanded in various hydraulic industries for accurate performance and hassle-free installation. Experiments: To determine the co-efficient of discharge of different Orifice and mouthpiece Utilities Required: Electric supply 0.5 kW, 220V AC, Single Phase Water supply Tap water connection BSP Distilled water @ 60 liters (optional) Floor Area with Drain facility Technical Specifications: Sudden Enlargement: From 13 mm to 23 mm Sudden Contraction: From 20 mm to 16 mm Electric supply: 0.5 kW, 220V AC, Single Phase

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Laboratory Lyophilizer Freeze Dryer

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTK-20FV)

FORCED VORTEX APPARATUS

Teknik is counted among the listed manufacturers, supply and exporters of premium quality forced vortex apparatus. The experimental set up consist of a circular transparent cylindrical tank in which four circumferential jets have been placed along the circumference of the cylinder near its bottom which helps in the formation of free vortex. It is assumed that the torque exerted by these jets is negligible. The Orifice is reducing bush so that a reduced diameter can be investigated. The plate can also be rotated with the help of a variable speed motor so that the cylinder rotates about its vertical Axis with the help of a V belt and forced vortex is formed. Conditions wear allowed to steady state and the depth of flow at any particular point was observed not to change over a period of time. The experimental procedure involves measurement of resulting free surface that represents the variation of the sum of the pressure and datum head. Product Specification Cylinder: Material acrylic Diameter: 200 mm. approx. Height: 300 mm approx. Motor: Variable speed DC motor of compatible Probe: Made of stainless steel Cross slide: With scale reading in cm

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Benchtop Lyophilizer Freeze Dryer

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Teknik Lyophilizer Equipment

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MT-101417A)

FREE & FORCED VORTEX APPARATUS

Free and Forced Vortex Flow apparatus offered by us has been painstakingly designed by our team of expert professionals. This apparatus enables the researchers to determine the shape of the vortex profile. With the accuracy of the results it provides, this apparatus is very popular in the market. Created using optimum quality materials and cutting edge technology, this delivers flawless performance. We subject it to quality tests based on multiple parameters before making it available to the customers. Range Of Experiments To visualize the forced & free vortex phenomenon. To plot the shape of vortex profile i.e. vertical height vs horizontal radius.

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Laboratory Lyophilizer Freeze Dryer 3kg

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTS-417S)

DARCYS LAW APPARATUS

The set-up consists of a cylindrical test section filled with pourous medium. Pressure tappings are provided in the test section to measure the pressure drop with the help of differential manometer. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and bypass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of rotameter. Product Specification Usage/Application: LAB EXPERIMENT Material: Stainless Steel Phase: Single Phase Country of Origin: Made in India

Send Inquiry
Request To Call Back
Product Image (MTK-1012BM)

BEND METER TEST RIG

Description: The apparatus consists of a pipeline that contains one Bend meter. The pressure tapings from the Bend meter is taken to differential manometer to measure pressure difference. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch. Experimentation: To demonstrate the use of Bend meter as flow meter. To determine co-efficient of discharge for given Bend meter. Product Details: Type: Assortment Set Voltage: 230 Volt (v) Material: Metal

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Lyophilizer Freeze Dryer 10kg

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Industrial Lyophilizer Freeze Dryer

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTFM-07)

FLUID PROPERTIES & HYDROSTATICS BENCH

The equipment is mounted on a steel-framed bench fitted with castors. A variety of measuring devices is incorporated either fastened to the back of the bench or free-standing. Water is stored in a polythene tank situated on the lower shelf of the bench. The water can be transferred by two positive displacement hand pumps either to an elevated open storage tank connected to a number of glass tubes for free surface studies or to a plastic sink recessed into the working surface so that bench top experiments may be conducted without spillage. All excess water is returned to the storage tank via the sink drain.

Send Inquiry
Request To Call Back
Product Image (MTFM-12)

PIPE SURGE & WATER HAMMER APPARATUS

Pipe surge and water hammer are two related but independent phenomena which arise when fluid flowing in a pipe is accelerated or decelerated. The associated pressure transients can be damaging to pipe work or components and systems must be designed to avoid or with stand them. The equipment designed by clearly demonstrates the different effects resulting from gradual or instantaneous changes in fluid velocity. Effect of initial fluid velocity can also be investigated. Pipe surge resulting from a gradual change in fluid velocity is clearly seen as fluctuating changes in head in a surge shaft. Water hammer resulting from a rapid change in fluid velocity is clearly seen as large changes in pressure monitored using a pair of transducers and indicated using an oscilloscope. The equipment comprises two stainless steel pipes connected to a constant head tank. A service module provides the water supply to the head tank and also incorporates a volumetric tank for flow rate measurement, sump tank, circulating pump and flow control valve. Water enters the two test pipes via the constant head tank and discharges into the volumetric tank. A dump valve in the volumetric tank returns the water to the sump tank. The pipe surge test section incorporates a clear acrylic surge shaft to enable visualization of its oscillatory characteristics to be demonstrated. A metric scale on the shaft permits the height of the oscillations to be measured. The test pipe terminates with a lever operated gate valve and separate flow control valve.

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Teknik Lyophilizer Freeze Dryer

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MT-101411A)

FLUID FRICTION APPARATUS

Fluid Friction Apparatus Shows flow and losses in different pipes, fittings and valves. Shows popular flow measurement instruments. A space-saving vertical panel that works with Gravimetric or Volumetric Hydraulic Benches for easy installation Includes different valves, pipes and fittings to show losses Includes experiments on roughened pipes Shows laminar and turbulent flow Uses Bernoulli™s equation Shows how to use Venturi and orifice meters to measure flow Includes a traversing Pitot tube to measure velocity profile Fluid Friction Apparatus allows students to study flow, flow measurement techniques and losses in a wide variety of pipes and fittings. The equipment has three water circuits with instruments, pipes and pipe system components. These allow students to examine and compare the different component characteristics. A hydraulic bench (Gravimetric) or Volumetric, available separately) supplies the circuit with a controlled flow of water. A space-saving vertical panel holds all the parts for easy use. To measure pressure loss across components, students use a piezometer set and differential pressure gauge (included). To perform experiments students record the temperature of water in the hydraulic bench and set the hydraulic bench to pump water through a circuit. They measure pressure losses across instruments or components. The hydraulic bench gives an external flow rate for reference and comparison. The flow measurement instruments show students the common methods of measuring water flow. They also give applications of the steady flow energy equation (Bernoulli™s equation). Students use a Venturi meter and an orifice plate meter and compare the losses of each. They also find the losses in a rapid enlargement. The equipment also includes a Pitot-static tube. By traversing the Pitot across the pipe diameter, students can find the velocity profile and flow coefficients. They also find the relationship between the flow rate and pressure differential. An artificially roughened pipe allows students to study friction factor at different Reynolds numbers, covering the interesting transitional flow from laminar to turbulent. They can compare results to those predicted by Nickuradse™s results and a Moody chart. Standard Features: Supplied with a comprehensive user guide. Two-year warranty. Manufactured in accordance with the latest Indian Union directives.

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Freeze Dryer Vertical Type

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTK-54DO)

DISCHARGE OVER NOTCHES APPARATUS

Technical Description: Teknik manufacture of discharge over notches apparatus. The setup consists of a channel having sufficient length and width in which water is supplied from the bottom. Required Notch is fitted at one end of this channel. A pointer gauge with Vernier scale is fitted to measure the height of fluid in flow channel. Arrangement for fixing interchangeable notches is made. Set of three notches, i.e. rectangular notch, 60 V notch 45 V notch is provided along with the set-up. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stopwatch. Technical Specifications: Channel Test Section: Size 600 x 250 x 180 mm. Notches: Material mild steel Rectangular Notch 45 V Notch 60 V Notch Pointer Gauge: With Vernier scale. Water Circulation: HP pump, ISI make. Flow Measurement: Using Measuring Tank with Piezo-meter, Capacity 45 Ltrs. stainless steel Sump Tank: Capacity 84 Ltrs. stainless steel Stop Watch: Electronic. The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure. Weight: 150 kg

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Horizontal Freeze Dryer

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTS-3342JR)

IMPACT OF JET ON VANES APPARATUS

We are counted among the most prominent manufacturers, traders and exporters of high quality Impact of jet of vanes. Designed in compliance with industry leading parameters, it is used to study the forced developed of a jet of water on different surfaces and to compare it with momentum theory. Offered set up consists of visible test enclosure, supply tank, measuring tank and pump for closed loop water circulation. Description The setup consists of a two sided clear fabrication section. Water is fed through a nozzle and discharged vertically to strike a target carried on a stem which extends through the cover. A weight carrier is mounted on the upper end of the stem. The dead weight of the moving parts is counter balanced by a compression spring. The vertical force exerted on the target plate is measured by adding the weights supplied to the weight pan until the mark on the weight pan corresponds with the level gauge. A total of two targets are provided, a flat plate and a hemispherical cup. Experimentation: To measure the force developed by a jet of water impinging upon a stationary object and comparison with the forces predicted by the momentum theory Utilities required: Hydraulic Bench

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Freeze Dryer 200 L H

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTS-3523)

LOSSES DUE TO FRICTION IN PIPE LINES APPARATUS

We offer highly demanded Losses due to friction in pipe line at the most competitive market price. Manufactured in accordance with the industry laid parameters, offered apparatus is highly demanded around the globe. The setup is designed to study the losses due to friction in pipes of different diameters and materials. This consists of a set of 3 different pipe test sections, supply tank, measuring tank and pump for closed loop water circulation. Experiments: To determine the losses due to fiction in pipes Utilities Required: Electric supply 0.5 kW, 220V AC, Single Phase Water supply Tap water connection BSP Distilled water @ 60 liters (optional) Floor Area with Drain facility Technical Specifications: Pipes (2 Nos.): Material GI of  & 1 diameter. Pipe Test Section Length: 1 m. Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Freeze Dryer Lab Scale

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTK-284CNR)

LOSSES DUE TO PIPE FITTING, SUDDEN ENLARGEMENT & CONTRACTION APPARATUS

The set up consists of a  bend and elbow, a sudden expansion & sudden contraction fitting from 15mm to 25mm, ball valve and gate valve. Pressure tapings are provided at inlet and outlet of these fittings under test. A differential manometer fitted in the line gives pressure loss of individual fittings. Present setup is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch. Sump Tank Capacity: 50 Ltrs Flow Measurement: Using Measuring Tank with Pedometer, Control Panel Comprises Of: Standard Make On/off Switch, Mains Indicator, Etc. Capacity: 25 Ltrs Manometer Fluid: Mercury (Hg) - 250 Gm Sudden Enlargement: From 15 mm to 25 mm Sudden Contraction: From 25 mm to 15 mm Bend: 1/2" Elbow: 1/2" Ball Valve: 1/2" Gate Valve: 1/2" Water Circulation: FHP Pump, Crompton Makes Pressure Drop Measurement: Differential Manometer Stop Watch: Electronic

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Laboratory Scale Freeze Dryers

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTK-6102TM)

DISCHARGE THROUGH ORIFICE METER APPARATUS

Discharge through orifice meter apparatus The apparatus consists of two pipelines emerging out from a common manifold. One pipeline contain a Venturi meter, second contains an Orifice. The pressure tapings from the Venturi meter and Orifice meter are taken to differential manometer to measure pressure difference. The Venturi meter and Orifice meter are connected in parallel and anyone of them can be put in operation by operating valves provided at the downstream. These valves can also regulate the flow. Present Set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different floe rate. Flow rate of water is measured with the help of measured with the help of measuring tank and stop watch. EXPERIMENTS:- To determine the Co-efficient of discharged through Venturi meter and Orifice meter To measure discharge through Venturi meter and Orifice meter as flow meters. UTILITIES: - Water Supply Drain Electricity Supply: Single Phase, 220 VAC, 0.5 kW TECHNICAL SPECIFICATIONS: - Venturi meter: Material Clear Acrylic, Compatible to 1 Dia pipe Orifice meter: Material Clear Acrylic, Compatible to 1 Dia. Pipe Water Circulation: FHP Pump, Crompton / Sharp make Flow Measurement: Using Measuring Tank, Capacity 25 Ltrs. Sump Tank: Capacity 50 Ltrs. Stop Watch: Electronic Control Panel: On / Off Switch, Mains Indicator etc. Tanks will be made of Stainless Steel The whole Set-up is well designed and arranged in a good quality painted Structure

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Freeze Dryer -80C

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -80 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTS-3524)

DISCHARGE THROUGH ROTA-METER APPARATUS

We are engaged in the manufacturing, exporting and trading of premium quality Rotameter Apparatus. Manufactured in accordance with the industry set parameters using best quality raw materials, this apparatus is used to determine the co-efficient of discharged through a venture meter or orifice meter. Furthermore, the offered apparatus is also used to calibrate the rotameter. Experiments: To determine the co-efficient of discharged through Venturi meter and orifice meter. To measure discharge through Venturi meter, Orifice meter and Rotameter. To calibrate the Rotameter. Utilities Required: Water Supply & Drain Electricity 0.5 kW, 220V AC, Single Phase Technical Specifications: Electric Supply: 230V 50Hz. With proper earthing. Exterior material: Stainless steel plate baked enamel. Temp. Range: -70 to 150oC. Power: Electronic, AC 1 phase 220V; 3 phase 380V 60/50

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Laboratory Freeze Dryer Machine

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (MTK-584VMT)

DISCHARGE THROUGH VENTURI-METER APPARATUS

The apparatus consists of a pipe line contains one Veturimeter. Veturimeter is made from clear Acrylic. The pressure tapings from the Veturimeter is taken to differential manometer to measure pressure difference. A valve is provided at the downstream side of Veturimeter. The flow can be regulated by this valve. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch. Usage/Application: Lab Experiments Type of Instruments: Educational Material: Stainless Steel Capacity: 50 LTRS Phase: SINGLE

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Lab Lyophilizer Freeze Dryer

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Freeze Dryer 43 Liters

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (JEQ-250)

Freeze Dryer -40C

It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings. Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins. Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures. Automatically control the rate of sublimation during the primary drying cycle with shelf heaters. Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance. Connect the unit to a PC via Ethernet cable for data logging and exporting. System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance. Features: User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps. Constructed with a durable stainless-steel chamber and collector Large 4.3 inch full-color, touch-screen display provides real-time pressure and temperature data Easily connect to a PC via ethernet cable for data logging and communication Capable of freeze drying as much as a 1-2 gallons of material Medium freeze dryer has a 4 L sublimated ice holding capacity Runs on 230Vac VAC 50 Hz VAC power Technical specification: Type: Standard Chamber, 4 port manifolds Cold Trap Temp.: -40 degree C Temp. Uniformity: ±1 Vacuum Degree: Ë0.1Pa Condensing Capacity: 3kg/h Drying Chamber Capacity: 43L Material Loading Capacity: 3000ml

Send Inquiry
Request To Call Back
Product Image (JP-2A)

Touch Screen Tissue Flotation Water Bath

High-definition color touching screen, all information at a glance, easy to operate; Precise temperature control by computer, rapid and stable heating, small error; Timing switch function and settings; With memory function: set temperature is automatically retained after operation. Unique timing reminder function, can set any time, buzzer alarm when the time is up; High-temperature-resistant and large-capacity glass tray, with LED lighting at the bottom, safe and energy-saving, also easy to observation of specimen Computer and physical dual temperature control protection system to avoid excessive temperature and damage specimen

Send Inquiry
Request To Call Back
Product Image (JP-2A)

Tissue Flotation Bath.

Tissue Flotation Bath is useful to float tissue wax sections to flatten for staining process. Double Walled chamber, inner made of black anodized aluminum and outer wall made of mild steel sheet duly painted. Gap between two insulated with glass wool. Paraffin section flotation water bath with digital temperature control. Temperature range from ambient to 75C. High temperature consistency. Overheat protection. Black inner surface with a scratch proof coating. Capacity: Approx. 2 liters. Work On 220V AC 50Hz single phase.

Send Inquiry
Request To Call Back
Product Image (JEQ-19M)

MAGNETIC STIRRER WITH HOT PLATE .

Price: 4500.0 INR/Piece

MAGNETIC STIRRER WITH HOT PLATE Electronically controlled. 01 Number of stirring Positions. Digital Display Option/Output Read out Option. Magnetic stirrer is with a hot plate or some other means for heating the liquid. Heating temperature range should be of 50 to 500 degree C. Minimum Speed Possible (RPM) 100 or better. Magnetic stirrer Type (variable speed). Top plate Material Ceramic. Base material will be of die cast aluminium. Warranty on Machine 3 year or more. Input Voltage: Single Phase 230 Volts

Send Inquiry
Request To Call Back
Product Image (JEQ-17B)

MAGNETIC STIRRER WITHOUT HOT PLATE .

Price: 2000.0 INR/Piece

MAGNETIC STIRRER WITHOUT HOT PLATE Highly Polished Stainless-Steel Top Plate Speed Range: 0 to 2200 rpm On / Off Power Switch. With Stir bar Warranty on Machine 3 year or more Input Voltage: Single Phase 230 Volts

Send Inquiry
Request To Call Back
Product Image (MCM-M139)

ELECTRONIC WEIGHING BALANCE

Price: 15000.0 INR/Piece

ELECTRONIC WEIGHING BALANCE Rated Load/ Capacity 200 g or better Resolution 1 mg LCD Display Automatic Tare/ Calibration Battery Backup up to 10 Hours Warranty 03 Year or more Input Voltage: Single Phase 230 Volts

Send Inquiry
Request To Call Back
Product Image (JEQ-3A)

HOT AIR OVEN

JEQ-3A Designed for critical laboratory applications for controlled temperature range up to 300C with an accuracy of ï0.5C. Integrated built-in see-thru toughened glass window in the double-walled door. Forced convection model accounts for temperature uniformity and higher control accuracy. Auto cut-off of blower and heaters on door open position. Seamless rounded back edges of internal work chamber and semicircular arcs at corners ensures easy clean-up and uniformities. Temperature Range: Up to 300C Temperature Accuracy: ï0.5C Microprocessor Based Auto tune PID temperature controller for PV/SV indication, timer, and cycle end alarm. Temperature Controller: Microprocessor Based Digital Temperature Indicator-Cum-Controller with LED OR LCD Display OR TFT Touch Screen Display Controller (Option). Inner chamber and adjustable trays are made of Stainless Steel (SS-304 grade). Outer body made of CRC Sheet duly powder coated. Horizontal on face cross-flow air circulation accounts for tighter uniformities and accuracy. Specially designed silicone door gaskets accounts for minimal heat dissipation and leakages thus accounts in electrical energy servings. To work on 220/230V AV, 50/60 Hz supply.

Send Inquiry
Request To Call Back
Product Image (JEQ-3C)

OVEN INCUBATOR ( VACUUM DRYING OVEN)

CODE: JEQ-3C PID microprocessor temperature control with LED display/LCD display. Polished stainless steel inner chamber. Vacuum degree is automatically controlled Silicon rubber seal ring ensures the high vacuum degree in the chamber. Tempered double-layer glass door ensures the operation safety. The vacuum is controlled by microprocessor controller with digital display. The working program can be cycled for 99 times. The vacuum pump is standard accessory Inert gas can be filled in the chamber. (Inert gas pressure is not higher than 0.1Mpa when filling in).

Send Inquiry
Request To Call Back
Product Image (JEQ-4A)

INCUBATOR .

CODE: JEQ-4A Forced convection incubators with controlled temperature up to 70C through Microprocessor LED Digital Temperature Controller with Auto Timer & Alarms. Designed for critical laboratory applications for controlled temperature range up to 70C with an accuracy ofï0.5C. Integrated built-in see-thru toughened glass window in the double-walled door. Forced convection model accounts for temperature uniformity and higher control accuracy. Auto cut-off of blower and heaters on door open position. Seamless rounded back edges of internal work chamber and semicircular arcs at corners ensures easy clean-up and uniformities. Microprocessor Based Auto tune PID temperature controller for PV/SV indication, timer, and cycle end alarm. These units are featured with Microprocessor Based AUTOMATIC DIGITAL TEMPERATURE INDICATOR-CUM- CONTROLLER with an in-built DIGITAL TIMER to control the temperature. Once the unit is switched "ON" heating starts automatically and once the set/desired value is achieved the in-built AUTOMATIC DIGITAL MINUTE TIMER starts automatically. Once this set time period is over the heaters are switched "OFF" automatically and the unit sounds a BUZZER, thus alerting the user that process is complete. Inner chamber and adjustable trays are made of Stainless Steel (SS-304 grade). Outer body made of CRC Sheet duly powder coated Horizontal on face cross-flow air circulation accounts for tighter uniformities and accuracy. Specially designed silicone door gaskets accounts for minimal heat dissipation and leakages thus accounts in electrical energy servings. To work on 220/230V AV, 50/60 Hz supply

Send Inquiry
Request To Call Back
Product Image (JEQ-4C)

BOD INCUBATOR

CODE: JEQ-4C LCD Display/LED Display. Polished stainless steel chamber. Universal castors for easy movement. Microprocessor PID temperature control: accurate and reliable. BOD socket integrated inside for additional small equipment. Double door design. Round angle structure, easy to clean. CFC-free environmental friendly refrigerant. SAFETY FUNCTION: Temperature protection threshold value can be set. Auto-off protection and alarm for abnormal situation. Parameters can be saved automatically when power off or system error. Capacity: 100L Temp. Range: 0 60 deg C Temp. Fluctuation: ï0.5 deg C Temp. Uniformity: ï 1 deg C at 37 deg C Shelves: 2pcs/adjustable Time Range: 099h Refrigerant: R134a (CFC free, eco-friendly) Working Type: Continuous Standard Accessories: BOD socket, built-in printer, 2 test ports, lock Optional Accessories: USB port Consumption: 1450W Power Supply: (AC 110/220 V ï 10% 50/60Hz Gross Weight (kg): 102

Send Inquiry
Request To Call Back
Product Image (JEQ-4SW)

STABILITY CHAMBER

CODE: JEQ-4SW When your testing requires walk-in rooms, choose "Teknik"", Controlled Temperature/Humidity Solution. Our test rooms feature automated process control, energy efficience and a vast range of features and options. Every "Teknik environmental room features equipment that reliably produces required conditions, structural integrity that keeps the room working properly through years of demanding test cycles, and measuring/monitoring equipment that precisely records all test data. Teknik Walk-In Stability Chamber ensure the Temperature-Humidity is uniform & within range throughout the room. Customer can also avail the option of 8 probe monitoring with data logging, trending & real-time alarms. PLC feature: PLC Based Control System make: Delta. PLC based Controlling, Safety, Atomization, and Communication & Database. 1500 Lines Storage Facility. PC Communication via Ethernet, Online monitoring on Graphical LED 7.0" Touch Screen Display: DELTA. PLC Based Safety control to protect the chamber from overshoot & undershoot of temp and RH. Auto changeover of Master sensor in case of failure. Auto switch over of Refrigeration System in case of failure. Auto changeover of Steam Generator in case of failure. Changing Set value of Master controller from HMI with password protection with auto log off. Alarm for low water level with Reset System to protect Steam Generation System. Password protected Door opening with Reason Master. Event logger facility. Password protected restores factory setting

Send Inquiry
Request To Call Back
Product Image (JEQ-4EC)

CONTROLLED ENVIRONMENT CHAMBER .

CODE: JEQ-4EC Controlled Environment Chambers are used to create replicated environmental conditions for research sample growth and testing through temperature, humidity, CO2, O2 Gas and lighting control. Feature: Multi-purpose Chamber Stability Testing. Seed Germination. Tissue Culture. Algae. Arabidopsis. Plant Growth. Bacterial Culturing. Drosophila Research, Insect. Reptile rearing and Research. Scalable Customizable Options: Air Heating, 6 Side Heating, Water Jacked. Ultrasonic Humidifier. Steam Generator Humidifier. Ultrasonic Humidifier and Dehumidifier. CO2 control. CO2 Incubator Mode O2 Control. Hypoxia Incubator Mode. N2 Control. -Tri-Gas Incubator Mode. CO2 removal system. Dimmable Natural lighting/Grow Lighting. Convenience receptacles. Extended temperature 2 to 70C. Controller: The control system was purpose-built for controlled environments. Microprocessor based PID Temperature controller with PT-100 Sensor. Control/front panel: control panel of our units comprises of on/off rocker switches for Power, cooling and Humidity (optional). Construction: Chamber Design: Double walled Inner chamber: Inner chamber made of steel Outer Chamber: Outer chamber made of Mild Steel with powder coated finish. Door: The door is provided with rubber gasket door closer. The outer door is made of mild steel sheet and finished with powder coating. The inner door is made of steel of. The door is provided with latch type lock and Bakelite/PVC handle. Inner Glass Door: Inner full-length glass door is provided to view the samples without disturbing the temperature Wheels: the unit is mounted on a sturdy steel frame with cast iron/caster wheels for easy movement. Integrated floor drain One access port with air-tight plug.

Send Inquiry
Request To Call Back
Product Image (MPH-EE-78A)

CRO 20MHZ, DUAL CHANNEL, 2 TRACE

Analog Oscilloscopes CRO 20MHZ, DUAL CHANNEL, 2 TRACE Increment amplification function for clear display. Dual channel/Dual tracing, X-Y mode. 6³ display cathode ray tube, sensitivity triggering up to 1mV/division. TV synchronous separation circuit to observe stable TV signal. Hold-Off function.

Send Inquiry
Request To Call Back
Product Image (MPH-EE-78)

CRO 30MHZ, DUAL CHANNEL, 2 TRACE

CRO 30MHz, Dual Channel, 2 Trace Increment amplification function for clear display. Dual channel/Dual tracing, X-Y mode. 6³ display cathode ray tube, sensitivity triggering up to 1mV/division. TV synchronous separation circuit to observe stable TV signal. Hold-Off function.

Send Inquiry
Request To Call Back
Product Image (MPH-EE-78C)

CRO 30MHZ, DUAL CHANNEL, 2 TRACE WITH INBUILT 30MHZ FREQUENCY COUNTER

CRO 30MHz, Dual Channel, 2 Trace with inbuilt 30MHz Frequency Counter Increment amplification function for clear display. Dual channel/Dual tracing, X-Y mode. 6³ display cathode ray tube, sensitivity triggering up to 1mV/division. TV synchronous separation circuit to observe stable TV signal. Hold-Off function.

Send Inquiry
Request To Call Back
Product Image (MPH-EE-78D)

CRO 60MHZ, DUAL CHANNEL, 2 TRACE

CRO 60MHz, Dual Channel, 2 Trace Increment amplification function for clear display. Dual channel/Dual tracing, X-Y mode. 6³ display cathode ray tube, sensitivity triggering up to 1mV/division. TV synchronous separation circuit to observe stable TV signal. Hold-Off function.

Send Inquiry
Request To Call Back
Product Image (MPH-EE-78S)

CRO 1CRO 10MHZ, SINGLE CHANNEL, 1 TRACE

CRO 10MHz, Single Channel, 1 Trace Bandwidth: 10 MHz ANALOG; Channels: 1; Input impedance: 1 MOHM +/-3%; Input capacitance: 30 pF +/- 5 pF; Rise time: < 35ns; Max input voltage: 400V (DC + AC PEAK); Sensitivity: 0.2V/DIV-0.5V/DIV; Lightweight with low power consumption TV synchronizing, X-Y operating Supplied with 1 (X1, X10) probe and manual High performance &; sensitive 5mV/DIV

Send Inquiry
Request To Call Back
Product Image (MTK-3028B)

DSO 25MHZ 2 CHANNEL SAMPLING RATE 250MS/S (COLOR LCD DISPLAY)

25 MHz Bandwidth 2 Input Channels 250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling 4k Memory Length per Channel Peak Detect as Fast as 10ns Save/Recall of 15 Front Panel Settings & Waveforms 5.6" TFT Color Display 19 Auto Measurements Timebase Range: 1nS 10nS/div USB Port for PC Connection Math Operators - Add, Subtract, FFT 6-Digit Real-Time Frequency Counter

Send Inquiry
Request To Call Back
Product Image (MPH-EE-79D)

DSO 50 MHZ 4 CHANNEL SAMPLING RATE 1GS/S (COLOR LCD DISPLAY)

50MHz bandwidth selections, 4ch input 1GSa/s maximum sampling rate 10M maximum memory depth for each channel 7" 800 x 480 WVGA LCD display 256 color gradient display function to strengthen waveform performance 1Mpts FFT frequency domain signal display Zero Key function for horizontal time, vertical voltage and triggering Compact and innovative exterior design

Send Inquiry
Request To Call Back
Product Image (MTS-19020)

SODIUM VAPOUR LAMP TRANSFORMER (35WATTS) (HEAVY DUTY)

Power Supply for Physics Setups Sodium Vapour Lamp Transformer (35Watts) (Heavy Duty) Sodium Vapour lamp Transformer are housed in iron cabinet and nicely painted.

Send Inquiry
Request To Call Back
Product Image (MTS-19020A)

SODIUM VAPOUR LAMP TRANSFORMER (35WATTS) (CHOKE BASED)

Sodium Vapour Lamp Transformer (35Watts) (Choke Based) Sodium Vapour lamp Transformer are housed in iron cabinet and nicely painted.

Send Inquiry
Request To Call Back
Product Image (MTS-19020B)

SODIUM VAPOUR LAMP TRANSFORMER (55WATTS)(HEAVY DUTY)

Sodium Vapour Lamp Transformer (55Watts)(Heavy Duty) Sodium Vapour lamp Transformer are housed in iron cabinet and nicely painted.

Send Inquiry
Request To Call Back
Product Image (MTS-19020C)

SODIUM VAPOUR LAMP TRANSFORMER (55WATTS) (CHOKE BASED)

Sodium Vapour Lamp Transformer (55Watts) (Choke Based) Sodium Vapour lamp Transformer are housed in iron cabinet and nicely painted.

Send Inquiry
Request To Call Back
Product Image (MTS-19020D)

MERCURY VAPOUR LAMP TRANSFROMER (80WATTS) (CHOKE BASED)

Mercury Vapour Lamp Transfromer (80Watts) (Choke Based) Sodium Vapour lamp Transformer are housed in iron cabinet and nicely painted.

Send Inquiry
Request To Call Back
Product Image (MTS-114T)

STEP DOWN TRANSFORMER 2-12 VAC/2 AMPS

Step Down Transformers Step Down Transformer 2-12 VAC/2 Amps Current Rating: 2 Amps Minimum Frequency: 50 Hz Brand: Teknik Warranty: 1 year

Send Inquiry
Request To Call Back
Product Image (MTS-114TA)

STEP DOWN TRANSFORMER 2-12 VAC/3 AMPS

Step Down Transformer 2-12 VAC/3 Amps Current Rating: 3 Amps Minimum Frequency: 50 Hz Brand: Teknik Warranty: 1 year

Send Inquiry
Request To Call Back
Product Image (MCPS-103)

DC REGULATED POWER SUPPLY SINGLE OUTPUT 0-30VDC/2 AMPS WITH FIXED 5V/3.3V OUTPUT

DC Regulated Power Supplies Single Channel / Dual ChannelDC Regulated Power Supply Single Output 0-30VDC/2 Amps with fixed 5V/3.3V output 0 30VDC/2A), High accuracy, high stability Over load & short circuit protection Allow full scale long time operation CC/CV indication Voltage and current continuously variable within nominal Value 0-2a 0 “ 5 a 0-8a Technical Specifications: Variable Output Output Voltage : 030VDC Output Current : 02A & 05A Source Regulation : ‰ 0.05% +10mV Load Regulation : ‰ 0.05% +10mV Ripple & Noise : ‰1 mV (rms) Digital Display : 3 digit voltage & current display Accuracy: +1%. +1 Digit Fixed Output Output Voltage : Fixed 5VDC/3.3VDC Output Current : 1A Source Regulation : ‰5mV Load Regulation : ‰15mV Ripple & Noise : ‰2mV (rms) Power requirement : 220 VAC +10% 50 Hz Standard Accessories : Power cable, Instruction manual

Send Inquiry
Request To Call Back
Product Image (MCPS-103A)

DC REGULATED POWER SUPPLY SINGLE OUTPUT 0-30VDC/5 AMPS WITH FIXED 5V/3.3V OUTPUT

DC Regulated Power Supply Single Output 0-30VDC/5 Amps with fixed 5V/3.3V output DC Regulated Power Supplies Single Channel / Dual ChannelDC Regulated Power Supply (0 30VDC/5A) High accuracy, high stability Over load & short circuit protection Allow full scale long time operation CC/CV indication Voltage and current continuously variable within nominal Value 0-2a 0 “ 5 a 0-8a Technical Specifications: Variable Output Output Voltage : 030VDC Output Current : 05A Source Regulation : ‰ 0.05% +10mV Load Regulation : ‰ 0.05% +10mV Ripple & Noise : ‰1 mV (rms) Digital Display : 3 digit voltage & current display Accuracy: +1%. +1 Digit Fixed Output Output Voltage : Fixed 5VDC/3.3VDC Output Current : 1A Source Regulation : ‰5mV Load Regulation : ‰15mV Ripple & Noise : ‰2mV (rms) Power requirement : 220 VAC +10% 50 Hz

Send Inquiry
Request To Call Back
Product Image (MTK-729B)

PROGRAMMABLE POWER SUPPLY 0-30V/5A

Programmable Power Supply 0-30V/5A Type: DC Supply Power:90W 54W Output Type: Single Power Source: Electric

Send Inquiry
Request To Call Back
Product Image (MCPS-104)

DC REGULATED POWER SUPPLY DUAL OUTPUT 0-+30VDC/2 AMPS WITH FIXED 5V/3.3V OUTPUT

DC Regulated Power Supply Dual Output 0-+30VDC/2 Amps with fixed 5V/3.3V output Features: High accuracy, high stability Over load & short circuit protection Allow full scale long time operation CC/CV indication Voltage and current continuously variable within nominal Value Technical Specifications: Variable Output Dual Output Voltage : 0 “ +30VDC Dual Output Current : 0 “ 2A Fixed Output : 5VDC/2A Stability: 0 to nominal value continuously variable, Voltage: <0.01% +2mV. Load: < 0.01% +2mV Recovery Time : ‰100ms Ripple & Noise : ‰1mV RMS (efficient value) Temperature Factor : ‰300 PPM PC 0 to nominal value Continuously Current Load Stability : ‰0.2% +3mA Source Regulation : ‰0.05% +10mV Load Regulation : ‰0.05% +10mV Digital Display : 3 Digit voltage & current display Accuracy : ±1%, +1 Digit Mode : Independent, Series and Parallel modes Power requirement : 220 VAC +10% , 50 Hz

Send Inquiry
Request To Call Back
Product Image (MCPS-104B)

DC REGULATED POWER SUPPLY DUAL OUTPUT 0 - +30VDC/3 AMPS WITH FIXED 5V/3.3V/2.5V OUTPUT

DC Regulated Power Supply Dual Output 0 - +30VDC/3 Amps with fixed 5V/3.3V/2.5V output Features: High accuracy, high stability Over load & short circuit protection Allow full scale long time operation CC/CV indication Voltage and current continuously variable within nominal Value Technical Specifications: Variable Output Dual Output Voltage : 0 “ +30VDC Dual Output Current : 0 “ 3A Fixed Output : 5VDC/2A Stability: 0 to nominal value continuously variable, Voltage: <0.01% +2mV. Load: < 0.01% +2mV Recovery Time : ‰100ms Ripple & Noise : ‰1mV RMS (efficient value) Temperature Factor : ‰300 PPM PC 0 to nominal value Continuously Current Load Stability : ‰0.2% +3mA Source Regulation : ‰0.05% +10mV Load Regulation : ‰0.05% +10mV Digital Display : 3 Digit voltage & current display Accuracy : ±1%, +1 Digit Mode : Independent, Series and Parallel modes Power requirement : 220 VAC +10% , 50 Hz

Send Inquiry
Request To Call Back
Product Image (MCPS-104A)

DC REGULATED POWER SUPPLY DUAL OUTPUT 0-+30VDC/5 AMPS WITH FIXED 5V/3.3V OUTPUT

DC Regulated Power Supply Dual Output 0-+30VDC/5 Amps with fixed 5V/3.3V output Features: High accuracy, high stability Over load & short circuit protection Allow full scale long time operation CC/CV indication Voltage and current continuously variable within nominal Value Technical Specifications: Variable Output Dual Output Voltage : 0 “ +30VDC Dual Output Current : 0 “ 5A Fixed Output : 5VDC/2A Stability: 0 to nominal value continuously variable, Voltage: <0.01% +2mV. Load: < 0.01% +2mV Recovery Time : ‰100ms Ripple & Noise : ‰1mV RMS (efficient value) Temperature Factor : ‰300 PPM PC 0 to nominal value Continuously Current Load Stability : ‰0.2% +3mA Source Regulation : ‰0.05% +10mV Load Regulation : ‰0.05% +10mV Digital Display : 3 Digit voltage & current display Accuracy : ±1%, +1 Digit Mode : Independent, Series and Parallel modes Power requirement : 220 VAC +10% , 50 Hz

Send Inquiry
Request To Call Back
Product Image (MCPS-105)

DC REGULATED POWER SUPPLY MULTIPLE OUTPUT (CH 1: 0-6VDC / 100MA-2AMPS, CH 2: 0-32VDC / 100MA-2AMPS, CH 3: 0-+15VDC / 100MA-1AMPS)

DC Regulated Power Supply Multiple Output (CH 1: 0-6VDC / 100mA-2Amps, CH 2: 0-32VDC / 100mA-2Amps, CH 3: 0-+15VDC / 100mA-1Amps) High accuracy, high stability Over load & short circuit protection Allow full scale long time operation CC/CV indication Voltage and current continuously variable within nominal Value Technical Specifications: Channel 1 Output Voltage : 06VDC Output Current : 100mA2A Channel 2 Output Voltage : 032VDC Output Current : 100mA2A Channel 3 Output Voltage : 0 15VDC (Tracking Mode) Output Current : 100mA “ 1A Source Regulation : ‰0.05% Load Regulation : ‰0.05% Ripple & Noise : ‰1mV (rms) Recovery time : ‰50ms Digital Display : 3 digit display for voltage & current Accuracy : +1%, +1 Digit Power requirement : 220 VAC +10% , 50 Hz

Send Inquiry
Request To Call Back
Product Image (MCPS-103AC)

DC REGULATED POWER SUPPLY SINGLE OUTPUT (0-100VDC/5 AMPS)

DC Regulated Power Supply Single Output (0-100VDC/5 Amps) Very stable & Precise Efficient Cooling System 2 L.E.D., Displays, 1 each for V & A Light Weight Design Short-circuit protection Fully Variable Output

Send Inquiry
Request To Call Back
Product Image (MTK-729BA)

LABORATORY DC POWER SUPPLY 0-230V/30A

Laboratory Dc Power Supply 0-230V/30A Type: DC Supply Output Type: Single Power Source: Electric

Send Inquiry
Request To Call Back
Product Image (MTS-955PM)

3.5 DIGIT LED DIGITAL PANEL METER (DC VOLTS, DC AMPS, DC MILLI AMPS, DC MICRO VOLTS)

Measuring Instruments 3.5 Digit LED Digital Panel Meter (DC Volts, DC Amps, DC Milli Amps, DC Micro Volts) Power Source: Electrical Material: SS Usage/Application: Laboratory

Send Inquiry
Request To Call Back
Product Image (MTS-955P)

3.5 DIGIT LED DIGITAL PANEL METER (AC VOLTS, AC AMPS)

3.5 Digit LED Digital Panel Meter (AC Volts, AC Amps) Power Source: Electrical Material: SS Usage/Application: Laboratory

Send Inquiry
Request To Call Back
Product Image (EM-350)

Tissue Embedding Center & Cooling Plate

A modular unit with separate cold storage unit. An integrated Para Trimmer with improved profile for optimum wax flow from surface. Cold plate temperature control adjustable and between -12C to 3C (tolerance +/- 1C). It long & short nozzle design. A higher temperature mould storage area 60C to prevent moulds sticking together. The Embedder has a thicker heater plate for minimal wax build up. Flat work surfaces for maximum working area. Electrically heated forceps optional. Paraffin wax tank: 5 litres. User-adjustable lighting levels provided. Independently controlled lighting provided. Tissue Storage tank large to hold all tissue baskets. Cold Plate hold at least 72 Standard base molds. Mold storage holds at least 300 standard base molds. Paraffin Drain Valves to drain waste wax and tissue tank present. Adjustable paraffin dispensing paddle to handle any size cassette provided. Thermally insulated work contact surfaces provided. Multilingual touch screen controls provided.

Send Inquiry
Request To Call Back
Product Image (EM-36)

DIGITAL PH METER

Digital pH Meter Display: 3 LED Range: 0-14 Ph, 0±1999mV Resulation: 0.01 pH, 1mV Temperature Compensation: Automatic Power Requirement: 220V AC

Send Inquiry
Request To Call Back
Product Image (EM-81)

TDS METER

TDS Meter Display: 3 LED Range: 0 to 1000 Ppt 5 Range Accuracy: ±1% FS ± 1 Digit Power Requirement: 220 V AC Complete with Operation Manual & Dust Cover.

Send Inquiry
Request To Call Back
Product Image (MTTA-32)

Kit Complement Transformer

Price: 100 INR/Piece
  • Accuracy:2%
  • Application:General lab equipments
  • Core Components:Transformer, Conducting wires, Connectors
  • Display Type:Analog
  • Equipment Materials:ABS Plastic, Metal
  • Feature:Portable, Durable build
  • Product Type:Kit Complement Transformer
  • Temperature Range:Ambient to 60C
Send Inquiry
Request To Call Back
Product Image (MT-1002DB)

Dispensing And Sampling Booth

HEPA filter (0. 3 micron) Fine filter (10-5 micron) Pre-filter (10 micron) Motor blower assembly U. V. Light Fluorescent lamp Operating switch Static pressure manometer Stainless steel standing base High quality hepa filter provides protection for the product (filtration efficiency of more than 99. 97% at 0. 3 micron Ultra-quiet noise level of not more than 65 dba Durable and easy to clean stainless steel body Work area properly illuminated by diffused glare free fluorescent light PVC flexible curtains on all the three sides Optional Accessories: Particle dust count-validation at site Timer for U. V. Light Speed regulator Caster wheels Magnahelic manometer

Send Inquiry
Request To Call Back
Product Image (JEQ-80SD)

Tissue Slide Dryer

LED touching screen, intuitive control panel, user-friendly operator. Fully programmable ON/OF control allows automatic system start and stop anytime. Computer temperature control, quick heating, temperature control precision is ± 1%. Automatic memory functions: after start up, all preset temperature dates are automatically stored in the system. Buzzer alarm, set time, buzzer alarm when time is up. Three temperature control protection: computer temperature control and physical control protection system to avoid high temperature damage to tissue.

Send Inquiry
Request To Call Back
Product Image (JP-2AS)

Combination Tissue Flotation Bath and Slide Dryer

The baking sheet part is colored with special technology, which has the advantages of wear resistance and no paint peeling. Multi-layer bevel design can process 60 tissue slices at the same time 6 sets of standard staining racks can be placed in the drying section, which can process 180 tissue sections at the same time This device uses a medical-grade high-definition color touch screen, all information is clear at a glance and easy to operate Precise temperature control by computer, fast and stable temperature rise It takes up to 10 minutes to reach 75 degrees The oven dryer and the slide dryer can be set to be heated separately Timing switch function Set time can be accurate to minutes Unique timing reminder function, set any duration, and beep after the time is up We also provide customers with a glass cover that can increase the heating efficiency

Send Inquiry
Request To Call Back
Product Image (JP-1SDW)

Pathology Equipment Tissue Slide Oven Slide Dryer Slide Warmer

LED touching screen, intuitive control panel, User-friendly Operator. Fully programmable ON/OFF control allows automatic system start and stop anytime. Computer temperature control, quick heating, temperature control precision is ± 1%. Automatic memory functions: after start up, all present temperature dates are automatically stored in the system. Buzzer alarm, set time, buzzer alarm when time is up. Two temperature control protection: computer temperature control and physical control protection system to avoid high temperature damage to tissue.

Send Inquiry
Request To Call Back
Product Image (MTK-8064P)

Paraffin Wax Dispenser

Utilizes full computer automated control and intelligent digit temperature control Utilizes new type of heating elements that enable fast energy efficient and reliable heating Temperature sensors are made in USA precise and reliable Automatically saves the latest operation settings Memory and automatic restoration function enables the pre-set temperature to be automatically saved after device operation LED displays the heating status Specification Temperature Set: 0-85 DEG C Working Environment Temp: 0 DEG TO 40 DEG C Capacity: 10L Net Weight: 20kg Relative Humidity: <80%

Send Inquiry
Request To Call Back
Product Image (JEQ-99TD)

Closed Automatic Tissue Dehydrator

Supply voltage and frequency: 110-120VAC, 60Hz or 220-240VAC, 50Hz Power consumption: 1200VA Operating temperature range: +10 DEGREE C to 40 DEGREE C Capacity: Up to 300 cassettes Temperature (paraffin): 50 DEGREE C 65 DEGREE C Temperature (dehydration reagent): Ambient temperature to 65 DEGREE C Temperature (rinse reagent): 60 DEGREE C for alcohol; 65 DEGREE C for xylene Number of small paraffin cylinders: 3 Number of large paraffin cylinders: 1 Capacity of small paraffin cylinders: 4.2L Capacity of large paraffin cylinders: 5.6L Reagent bottle: 10 Condensate bottle: 1 Rinse bottle: 3

Send Inquiry
Request To Call Back
Product Image (JEQ-474CW)

Fully Automated Coverslipping Workstation

Multiple staining processes can run in parallel Reagent heating eliminates seasonal effects Automatic detection of waste gas concentration, equipped with purification device, health and environmental protection Servo motion control system, fast, stable, and accurate Sound and light dual alarms in case of malfunction, the system automatically pauses waiting for the malfunction to be resolved, safe and reliable, without damaging the glass slide

Send Inquiry
Request To Call Back
Product Image (JEQ-19M)

MAGNETIC STIRRER WITH HOT PLATE

MAGNETIC STIRRER WITH HOT PLATE Electronically controlled. 01 Number of stirring Positions. Digital Display Option/Output Read out Option. Magnetic stirrer is with a hot plate or some other means for heating the liquid. Heating temperature range should be of 50 to 500 degree C. Minimum Speed Possible (RPM) 100 or better. Magnetic stirrer Type (variable speed). Top plate Material Ceramic. Base material will be of die cast aluminium. Warranty on Machine 3 year or more. Input Voltage: Single Phase 230 Volts

Send Inquiry
Request To Call Back
Product Image (JEQ-17B)

MAGNETIC STIRRER WITHOUT HOT PLATE

Price: 1000.0 INR/Piece

MAGNETIC STIRRER WITHOUT HOT PLATE Highly Polished Stainless-Steel Top Plate Speed Range: 0 to 2200 rpm On / Off Power Switch. With Stir bar Warranty on Machine 3 year or more Input Voltage: Single Phase 230 Volts

Send Inquiry
Request To Call Back
Product Image (MCM-M139)

ELECTRONIC WEIGHING BALANCE

Price: 50 INR/Piece

ELECTRONIC WEIGHING BALANCE Rated Load/ Capacity 200 g or better Resolution 1 mg LCD Display Automatic Tare/ Calibration Battery Backup up to 10 Hours Warranty 03 Year or more Input Voltage: Single Phase 230 Volts

Send Inquiry
Request To Call Back
Product Image (JEQ-14)

WATER DISTILLATION UNIT

WATER DISTILLATION UNIT Stainless steel wall mountable unit Distillation Water Capacity (LPH): 4 or more pH Value: 5 to 7 Conductivity (ïS/cm): ï1 Numbers of Built in Quartz Heaters: 2 Distillation Units Type: Vertical Distillate Temperature :25-70 Biological Activity: Pyrogen free Built in Quartz Heater Capacity: 4 kilowatt or better Double Stage Glass Distillation Units: Yes Cooling Water Consumption (LPH): 41 or better Auto Cut Off System: Yes Input Voltage: Single Phase 230 Volts

Send Inquiry
Request To Call Back
Product Image (EM-36)

AUTOMATIC PH METER .

Price: 5000.0 INR/Piece

AUTOMATIC PH METER Microprocessor Based LCD Display pH Range 0.00 to 14.00 pH Sensor Gel based Accuracy rate ï 0.002 or better Corrosion Resistant Resolution (pH) 0.01 Temperature Probe Input Voltage: Single Phase 230 Volts

Send Inquiry
Request To Call Back
Product Image (MTBA-31)

VACUUM PUMP .

Price: 2500.0 INR/Piece

VACUUM PUMP Max. Vacuum 100 mbar Max. flow rate 17 L / min Motor rotation 1450 rpm Port thread 9 mm Oil free Input Voltage: Single Phase 230 Volts

Send Inquiry
Request To Call Back
Product Image (JEQ-21)

MELTING POINT APPARATUS .

Price: 2000.0 INR/Piece

MELTING POINT APPARATUS Metallic heating block. Focusable lens. Regulator to control the heat. 03 numbers of capillaries & 01 number of thermometer positions. Range: Ambient temperature to 250 Degree C or better. 01 Thermometer temp 250 Degree C or better with this Melting Point Apparatus. Input Voltage: Single Phase 230 Volts

Send Inquiry
Request To Call Back
Product Image (JEQ-2A)

WATER BATH .

Price: 5500.0 INR/Piece

WATER BATH 12 number of cavities to keep beakers Digital display of temperature Double walled rectangular chamber Stainless Steel Tank design for easy cleaning and draining Concentric Rings Temperature Range ambient to 100 degree C Water bath Chamber Capacity over 10 to 18 litres Safety Features Over Temperature Alarm & cut off Input Voltage: Single Phase 230 Volts Warranty 03 years

Send Inquiry
Request To Call Back
Product Image (MTK-7738PF)

PORTAL FRAME APPARATUS

We are the leading organization actively occupied in providing an extensive series of Portal Frame Apparatus. This product is presented in numerous of specifications. Product Specification Material: Mild Steel Operating Voltage: 240V Operating Frequency: 50Hz Diameter: 25 mm travel Size: 40cm X 60 cm Power: 6.5 HP

Send Inquiry
Request To Call Back
Product Image (MTK-7716RJ)

REDUNDANT JOINT APPARATUS

Product Specification Usage/Application: Industry Material: Mild Steel Voltage: 380V Shape: Rectangular Finishing: Powder Coated Country of Origin: Made in India Power: 3.5 kW

Send Inquiry
Request To Call Back
Product Image (MTK-7743HA)

TWO HINGED ARCH APPARATUS

Keeping in mind ever-evolving requirements of our respected clients, we are offering a premium quality range of Two Hinged Arch Apparatus. Product Specification Rise: 25 cm Dial Gauge: Yes Travel Size: 25 MM

Send Inquiry
Request To Call Back
Product Image (MTK-7796UB)

UNSYMMETRICAL BENDING APPARATUS

Voltage: 220 V Material: Mild Steel Automation Type: Semi-Automatic Surface Finish: Color Coated Rotation: 45 Degree Intervals Usage: Laboratory

Send Inquiry
Request To Call Back
Product Image (MTK-6847FA)

BENDING MOMENT & SHEAR FORCE APPARATUS

Beam “ 1 mtr. Span with supports. Bending moment measurement arrangement. Shear force measurement arrangement. Spirit level to restore the loaded beam to original position. Weight set with loading hangers.

Send Inquiry
Request To Call Back
Product Image (MTK-6847FAA)

BENDING MOMENT & SHEAR FORCE ADVANCE APPARATUS

This equipment is used for measurement of shear force and bending moment in a beam from which comparison with theoretical values can be made. The beam has two parts with one part having ball bearings travel on vertical surface of the other part, an overhung spring balance for measuring the shear force, and an under-hanging spring balance for measuring bending moment are provided. The beam rests on two roller supports. Load hangers and weights slide along the beam.

Send Inquiry
Request To Call Back
Product Image (MTK-7712CS)

BEHAVIOR OF COLUMN STRUTS APPARATUS

Apparatus consist of four spring steel columns which are put along a vertical wooden board. These four columns have different end conditions as below: Both ends pinned Both ends fixed One end pinned and other fixed One end fixed and other end free Apparatus to be supplied should be complete with a supporting stand and a set of weights.

Send Inquiry
Request To Call Back
Product Image (MTK-7719CM)

CURVED MEMBER APPARATUS

Apparatus consists of a steel bar which is used to make the different curved members Viz. circle, semicircle with straight arm, a quadrant of a circle and quadrant of a circle with straight arm. The bottom ends of the members are fixed to the base. Under the application of load at free end, its horizontal and vertical deflection can be measured with the help of dial gauges. A dial gauge with 25mm travel (with a magnetic base) is supplied with the apparatus. Apparatus to be supplied should be complete with a supporting stand and a set of weights. Experimental Capabilities: Apparatus is supplied complete with a supporting stand and a set of weights.

Send Inquiry
Request To Call Back
Product Image (MTK-7708DT)

DEFLECTION OF TRUSS APPARATUS

Apparatus consists of 4 panels of a PRATT truss, each panel being 40cm in horizontal direction and 30cm in vertical direction. All tension members are provided with detachable springs so as to obtain appreciable deformation of the member. Apparatus can be used to illustrate visually the nature of forces set up in various members of the Truss. Apparatus is supplied complete with a supporting stand and a set of weights

Send Inquiry
Request To Call Back
Product Image (MTK-7747PD)

ELASTIC PROPERTIES OF DEFLECTED BEAM APPARATUS

Technical Detail Determine the elastic line Beams of different materials: steel, brass and aluminum 2 pinned supports 1 fixed support with clamp Dial gauges for recording the deformation of the beam Storage system for parts Beams Steel, LxWxH: 1000x20x3mm Brass, LxWxH: 1000x20x6mm Aluminum, LxWxH: 1000x20x6mm Weights 2x 1N (hanger) 10x 1N 6x 5N Measuring ranges travel: 020mm Graduation: 0,01mm Software for data acquisition via USB under Windows 8.1, 10

Send Inquiry
Request To Call Back
Product Image (MTK-7799TN)

THREE HINGED ARCH APPARATUS

Our precious clients can avail from us an exclusive array of Three Hinged Arch Apparatus. The mild steel model should have a span of 100cm and rise 25cm, with hinges at supports and crown. One of the ends should rests on rollers. Along the horizontal span of the arch various points are marked at equidistant for the application of load. This being a statically determinate structure, the horizontal thrust developed under the action of any load system can be theoretically calculated and will also be measured directly by neutralizing the outward movement of the roller end. A dial gauge with 25mm travel (with magnetic base) may be supplied with the apparatus. Apparatus to be supplied should be complete with a supporting stand and a set of weights.

Send Inquiry
Request To Call Back
Product Image (MTK-7771SC)

SHEAR CENTRE APPARATUS

We have range of high quality Shear Centre Apparatus (Structural Engineering Trusses Apparatus) with us. Such as: Shear Centre Apparatus. Apparatus consists of sturdy base frame and Channel, Equal angle; Semicircle and Z-Section are supplied with apparatus. Standard length of each of the four sections in M. S. is supplied. Each is provided with end clamp for fixing to the rigid bracket. A special load hanger is provided so as to change the load position so that with the help of two dial-gauges, the vertical plane of Shear-centre for the particular section can be determined.

Send Inquiry
Request To Call Back
Product Image (MTK-7749SB)

SUSPENSION BRIDGE APPARATUS

Apparatus consists of two mild steel cables 0.5cm diameter in cross section and 150cm long, pinned to two supports 90cm apart situated symmetrically. One of the ends can be converted to a roller by applying a known load at the end with the help of suspended pulley system. Vertical loads can be applied at various points along the span of the beam. A dial gauge with 25mm travel (with a magnetic base) will be supplied with the apparatus. Apparatus will be supplied complete with a supporting stand and a set of weights.

Send Inquiry
Request To Call Back
Product Image (MT-101427)

BASIC HYDROLOGY SYSTEM

Technical Data Tank: Stainless steel 100 cm wide x 200 cm long x 19 cm high. . Inclination: 0-3%. End compartments: 2 ea. Wells: 2 ea. Spray nozzles: 8 nozzles with separate shutoff valves. . Flow measurement Rain water: Variable area flow meter. Run off: Calibrated weir. . Manometer: 1 ea. Upper walls: Clear acrylic. . Accessories: - Rectangular ring, circular ring, confined equifer, cylindrical pier. . Power supply: 220 V, 1 Ph, 50 Hz. Other power supply is available on request. Typical Tests Investigation of rainfall/runoff relationships for dry, saturated and impermeable catchments of various slopes for surface runoff. . Effect of interflow on outflow hydrograph. Simulation of multiple and moving storms. Cone of depression for single well and interaction of cones of depression for two adjacent wells. De-watering of excavation sites by use of wells. Flow from a well in a confined aquifer. Demonstration of watersheds for a simulated island with rainfall and well flows. Sediment transport and meanders in simulated rivers. A metal frame supports the tank and houses a storage tank. Water is drawn from the storage tank by a pump and separately supplied to the overhead nozzles and/or the two end compartments via a flow meter and pipings with valve control. Run-off from the catchment is measured by a calibrated rectangular weir or returns directly to the storage tank.

Send Inquiry
Request To Call Back
Product Image (MTK-74523F)

VENTURI FLUME

A venturi flume is a critical-flow open flume with a constricted flow which causes a drop in the hydraulic grade line, creating a critical depth. It is used in flow measurement of very large flow rates, usually given in millions of cubic units Product Specification Usage/Application: Educational purposes Material: Stainless Steel Phase: Single Phase Accuracy: 100% Country of Origin: Made in India

Send Inquiry
Request To Call Back
Product Image (MTK-6352WF)

STANDING WAVE FLUME

FRP Standing Wave Flumes used for discharge measurement in channels and laboratories are experimentally investigated. Height and width of SWF are the two parameters characterizing the head-discharge relationship. Laboratory experiments are conducted by measuring the discharge and the head over the weir for variable weir heights and widths. Applicability of various formulations for the discharge coefficient are investigated. Specifications: Material: FRP Size: Customized

Send Inquiry
Request To Call Back
Product Image (MTK-404HM)

HUMP .

Objectives To study the variation in flow due to introduction of different types of humps or weirs in the flume. Flow Characteristics over Hump Hump It is a structure or obstruction that is constructed across a river or stream to raise the level of water on upstream side so that it can be diverted to canals to meet the irrigation requirements.

Send Inquiry
Request To Call Back
Product Image (MTK-5745SPL)

SPILLWAY .

Flume specifications 0.8 m wide — 9 m long — 0.5 m deep Tilting flume enabling wide range of spillway slopes Connected to WRL™s recirculation facility enabling continuous flow rates of up to 400 l/s Transparent walls and base allowing detailed flow observations from all sides Modular structure allowing for downstream energy dissipaters Large header tank (4.5 m long — 2 m wide — 2.8 m high) for calm inflow conditions Modular structure of header tank allows uncontrolled and gated spillway flows Typical investigations Design optimisation of spillways and stilling basins Energy dissipation performances of hydraulic structures High-velocity free-surface flows Three dimensional air-water flows Re-aeration and air-water mass transfer processes Flow resistance and flow structure interactions

Send Inquiry
Request To Call Back
Product Image (MTK-888SG)

SLUICE GATE

Sluice gate with lateral sealing lips Height adjustment using hand wheel Scale to read the height of the gate opening Technical data Gate Weir plate made of PVC Head adjustment: 0150mm Dimensions and weight LxWxH: 370x263x710mm Weight: approx. 5kg

Send Inquiry
Request To Call Back
Product Image (MTK-769SP)

SIPHON SPILLWAY

SIPHON SPILLWAY

Send Inquiry
Request To Call Back
Product Image (MTK-5200TB)

TILTING BED FLOW CHANNEL (LENGTH; 2.5M) WITHOUT ACCESSORIES

This apparatus consists of a Flow channel. Channel is fabricated from transparent Toughened Glass and Stainless Steel together. The equipment is designed to study the various phenomenon of flow with the help of various types of blocks, gates, weirs, and other many types of accessories (Optional). The channel section is transparent by which user can observe the various flow patterns of fluid in the channel and photographs can be taken. These glass panels are sealed with the stainless steel bed. This channel is floor mounted. Instrument rail is provided along the entire working length of the flume. A scale is provided along with the rail. A pointer gauge is provided to measure the depth of flow that can move on the rail. At the inlet of the flume an inlet tank with stilling and smoothing device is provided for obtaining the excellent velocity profile in the test section. At the discharge side a gate is provided which have an adjustable height. This gate maintains the operating water levels for the flume. This flume is tilted using a jacking system which has one jack. An arrangement has been done to calculate the slop of channel. The flow channel is self-contained re-circulating unit provided with sump tank, centrifugal pump, and control valve. Water is circulated through the channel by centrifugal pump. The pump draws water from sump tank to inlet tank of flume and return back to sump after passing through the channel. Product Details: Automatic Grade: Manual Voltage: 220 V Backrest Adjustment: 0-75 Deg Capacity: 240 Kg Footrest Adjustment: 0-40 Deg Height Adjustment: 575 - 815 mm

Send Inquiry
Request To Call Back
Product Image (PITOT TUBE & MANOMETER BOARD)

PITOT TUBE & MANOMETER BOARD

5 Selectable Units Of Pressure Measurement 5 Selectable Units Of Pressure Measurement Large Backlit LCD Display Easy To Calculate The Area Of A Rectangular Or Circular Duct

Send Inquiry
Request To Call Back
Product Image (MTK-2235GP)

PARSHALL FLUME

The Parshall Flume is an economical and accurate way of measuring water flow in open channels and non-full pipes. Originally the flume was developed to measure surface waters, water rights apportionment, and irrigation flows. However, its use has expanded to include measuring sewage flow (both in pipe and treatment plants), industrial discharges, dam seepage, and other applications.

Send Inquiry
Request To Call Back
Product Image (MTK-4712BR)

CURRENT METER

Fluid: for water Installation: vertical Material: stainless steel Protection level: corrosion-resistant Other characteristics: precision

Send Inquiry
Request To Call Back
Product Image (MTK-453W)

V-NOTCH WEIR

Product Features Vibrating Wire precision water level sensor Simple in, low cost and robust instrument Accurate and sensitive water level monitoring High resolution monitoring Low maintenance system Range: 300mm Resolution*: 0.025% full scale (minimum) Material: Stainless Steel

Send Inquiry
Request To Call Back
Product Image (MTK-7475RW)

RECTANGULAR NOTCH WEIR

Rectangular Weir: A rectangular notch is a thin square edged weir plate installed in a weir channel

Send Inquiry
Request To Call Back
Product Image (MTK-011WR)

RECTANGULAR OVERSHOT WEIR/ BOARD CRESTED WEIR

We have marked a remarkable position in the market by offering the best quality array of Broad Crested Weir. Features: Elevated durability Dimensional accuracy Easy usage

Send Inquiry
Request To Call Back
X


Quick Links
Our Products
View All
Contact Details
    MICRO TEKNIK

    GST : 06ACMPJ7244B1ZS

  • Plot No. 73, Vikaspuri, Industrial Area, Ambala Cantt - 133001, Haryana, India
  • Phone : 07971459233
  • Mr Vikas (CEO)
  • Mobile : 07971459233
  • Send Inquiry Send Inquiry
    Send SMS Send SMS
       
    Call Me Call Me Free
    Back to top
    Tradeindia
    M/S MICRO TECNIK All Rights Reserved.(Terms of Use)
    Developed and Managed by Infocom Network Private Limited.