Thermo Gravimetric Analyzer (Tga)

Product Description

• Temperature range:-150°C to 2400°C
• Furnace:Variety of furnaces incl. high-speed, water-vapor, low to
• Highest temperature, e.g., silver, platinum, tungsten, etc.
• Motorized furnace hoist:Double hoist for two furnaces or one furnace + automatic
• Sample changer
• Heating rate:0.001 to 50 K/min (furnace-dependent)
• High-speed furnace:up to 1000 K/min
• Sensors:TGA, TGA-DTA, TGA-DSC, TGA-DSCcp, special sensors for
• Hanging samples. Sensors can be changed out easily in a matter of moments
• Vacuum-tight:10-4 mbar
• AutoVac:Option for software-controlled automatic evacuation
• Evacuation system:Options for one and two furnaces; manual or software
• Controlled operation
• Atmospheres:Inert, oxidizing, static, dynamic, vacuum
• Oxygen trap system (OTS®):Optional
• Automatic sample changer (ASC):20 crucible positions (optional)
• Gas flow control:Integrated frits (optional 3 mass flow controllers)
• Temperature resolution:0.001 K
• Balance resolution:0.1 g (over the entire weighing range)
• Balance drift:< 5 g/hour
• Maximum sample load:35000 mg (incl. crucible), corresponds to TGA measuring range
• Sample volume (max.):TGA: up to 5 ml
• DSC: 0.19 ml
• DTA: 0.9 ml
• DSC enthalpy accuracy:±2% (for most materials)
• Evolved gas analysis:QMS, GC-MS and/or FT-IR couplings, PulseTA® (options)
• Optional instrument specialties:Glove box version
• Corrosion-resistant version

• Type E: -150°C to 700°C*
• Type K: -150°C to 800°C*
• Type S:RT to 1650°C
• Type S protected:RT to1650°C
• Type P:-150°C to 1000°C
• Type B:RT to 1750°C
• Type W:RT to 2400°C

• TGA-DTA, TGA-DSC (cp):inert, red., oxid., vac.
• TGA-DTA, TGA-DSC (cp):inert, red., oxid., vac.
• TGA, TGA-DTA, TGA-DSC(cp)inert, red., oxid., vac.
• TGA, TGA-DTA:inert, red., oxid., vac., corr.
• TGA, TGA-DSC, TGA-DSC (cp) inert, red., oxid., vac.
• TGA, TGA-DTA, TGA-DSC: inert, red., oxid., vac.
• TGA, TGA-DTA:inert, red., vac.