M/S Micro Teknik
Send Inquiry Send SMS    Call Me Free
M/S Micro Teknik Banner
Los Angeles Abrasion Testing Machine Los Angeles Abrasion Testing Machine
Los Angeles Abrasion Testing Machine
Los Angeles Abrasion Testing Machine

Los Angeles Abrasion Testing Machine

Product Details:

X

Los Angeles Abrasion Testing Machine Price And Quantity

  • 1 Unit

Los Angeles Abrasion Testing Machine Trade Information

  • Telegraphic Transfer (T/T) Cash in Advance (CID) Cheque
  • 100 Unit Per Week
  • 1 Week
  • Australia North America Eastern Europe Africa Central America Middle East South America Western Europe Asia
  • All India

Product Description

LOS ANGELES ABRASION TESTING MACHINE  MTAT-01

Los Angeles machine consists of a hollow steel cylinder, closed at both ends having an inside diameter and an inside length of mounted on stub shafts about which it rotates on a horizontal axis. An opening is provided in the cylinder for the introduction of the test sample. A removable cover of the opening is provided in such a way that when closed and fixed by bolts and nut, it is dust-tight and the interior surface is perfectly cylindrical. A removable steel shelf projecting radically 8.8 cm into the cylinder and extending to the full length of it is mounted on the interior surface of the cylinder rigidly parallel to the axis. The shelf is fixed at a distance of 125 cm from the opening, measured along the circumference in the direction of rotation. The weight of the sphere used as the abrasive charge and the number of spheres to be used are specified depending on the gradation of the aggregates tested.

Features

  • Flawless finish
  • Affordable prices
  • Specifically designed
  • Electronic safety interlocks allow operation only with doors secured
  • Powerful 1hp motor rotates drum through slip-clutch protected chain drive
  • Enclosure lined with sound attenuating foam
  • Precision performance
  • Reliable
  • Fitted with a revolution counter
  • Available with optional accessories
  • Highly accurate results
  • Less maintenance

Technical Specification
  •  The machine consists of a hollow cylinder mounted horizontally on a study frame on ball bearings. There is an opening which can be closed with a dust tight cover to facilitate charging and discharging the drum with the material under test.
  • A detachable shelf which extends throughout the inside length of the drum which catches the abrasive charge and does not allow it to fall on the cover. 
  • The drum is rotated by an electric motor through a heavy reduction gear at a speed of 30 -33 rpm. 
  • A revolution counter is fitted to the frame. 
  • A tray is supplied for collection of the material at the end of the test.
  • Complete with abrasive charge consisting of a set of twelve hardened steel balls, approximately 48 mm diameter. 
  • Suitable for operation on 440 volts, 3 phase, 50 cycles, AC supply.
  • A revolution counter
  • A tray

Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Aggregate Laboratory Tests' category



trade india member
M/S MICRO TECNIK All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.