Flow Meter Demonstration Unit
Product Details:
X
Flow Meter Demonstration Unit Price And Quantity
- 1 Unit
Flow Meter Demonstration Unit Trade Information
- Cash Advance (CA) Telegraphic Transfer (T/T) Cash in Advance (CID)
- 100 Unit Per Week
- 1 Week
- Asia Australia North America Eastern Europe Africa Central America South America
- All India
Product Description
Flow Meter Demonstration Unit: MTFM-09
The Flow Meter Demonstration Unit is a self-contained facility to demonstrate the important characteristics of flow meters. The main elements are a service module and flow meter support stand. A self-priming centrifugal pump draws water from the sump tank in the service module and delivers it to a flow meter test pipe. Industrial type flow meters mounted in test sections can be fitted into the test pipe quickly and easily. These meters have been chosen to give a variety of different metering principles and degrees of sophistication and accuracy. Some of the meters are calibrated directly in units of flow, whilst others involve the use of calibration charts.
The pressure drop across each of the flow meters can be measured by using either the one meter pressurized water manometer or the 0.5 meter mercury manometer supplied. Ported manometer connection valves ensure rapid bleeding of all manometer pipe work. A facility exists to admit air into the hydraulic stream to demonstrate the effect on the meters accuracy. The discharge from the test section is controllable and is fed through a diffuser into the channel of the service module.
DEMONSTRATION CAPABILITIES
- Comparing the use application and limitations of various types of flow meter
- Considering the implications of flow meter selection on performance, accuracy, convenience, cost and head loss
- Understanding the principles on which different types of flow meter are based
- Relating pressure drop across a flow meter to flow rate
- Using manometers to measure pressure drop
- Investigating the effect of air in the hydraulic stream on flow meter performance
- Understanding the application of Bernoullis Theorem
TECHNICAL SPECIFICATIONS
- Maximum flow rate: 2.3 liters/s
- Reservoir capacity: 140 liters
- Volumetric tank capacity: 40 liters
- Nominal bore of pipe work: 38mm
- Length of removable test pipe: 750mm
- Pump motor rating: 0.55kW
- A self-contained apparatus to demonstrate the
- characteristics of flow meters used in measurement of water flow through pipes or open channels
- Service module with reservoir, volumetric measuring tank and pump
- Reference turbine flow meter permanently fitted
- Metering devices available in various combinations to suit coursework
Enter Buying Requirement Details
Send Inquiry